Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud_top_height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Pioneer fly-by of Saturn and its rings

Results acquired by the imaging photopolarimeter on board Pioneer 11 during the spacecraft fly-by of Saturn and its rings on September 1, 1979 are reviewed. Analysis of the broadband photometry and polarimetry obtained of the Saturn atmosphere has been used to determine a cloud top height of 300 mb and a scale height of the aerosol distribution about 1/4 that of the ambient gas, and to point out differences between the forward scattering and belt and zone characteristics of the Saturn and Jupiter atmospheres. Images of Saturn's rings have been used to derive a profile of ring optical depth between 1.22 and 2.35 Saturn radii, and reveal new divisions and thin rings and azimuthal variations in the brightness of the A ring not observable from earth. Linear polarization observations of Titan in red and blue light reveal that the aerosols near the top of the atmosphere have radii less than about 0.09 micron and that the optical thickness of the small aerosol layer is about 0.6 above an effectively depolarizing surface, and indicate radii of 2845 + or - 25 km and 2880 + or - 22 km in red and blue light, respectively. Earth-based and spacecraft data are consistent with the formation of rings structures as a result of Poynting-Robertson drag and gravitational satellite resonances with the original ice and rock particles.

Gehrels, T.↗

Efficient transfer of weather information to the pilot in flight

Efficient methods for providing weather information to the pilot in flight are summarized. Use of discrete communications channels in the aeronautical, VHF band or subcarriers in the VOR navigation band are considered the best possibilities. Data rates can be provided such that inputs to the ground based transmitters from 2400 band telephone lines are easily accommodated together with additional data. The crucial weather data considered for uplinking are identified as radar reflectivity patterns relating to precipitation, spherics data, hourly sequences, nowcasts, forecasts, cloud top heights with freezing and icing conditions, the critical weather map and satellite maps. NEXRAD, the ground based, Doppler weather radar which will produce an improved weather product also encourages use of an uplink to fully utilize its capability to improve air safety.

Mcfarland, R. H.↗

Infrared digital data analysis of severe storms and hurricanes from geosynchronous satellite

A severe storm in Louisiana on March 24, 1976 is considered, taking into account gravity wave observations made with the aid of a Doppler sounder array and remote sensing studies of the cloud top. Attention is also given to the Hurricane Frederic on September 12, 1979. A study which takes into account the observations regarding the gravity waves and the satellite observations of clouds associated with Hurricane Frederic shows that gravity waves were excited by overshooting turrets above the tropopause. The altitude of the turrets above the tropopause is an indication for the intensity of a cyclone, while the change in cloud top height provides an indication related to the amplification of hurricane intensity.

Hung, R. J.↗

Cloud top remote sensing by airborne lidar

Observations of cloud top height, backscattering, and signal depolarization have been obtained by a lidar system operating onboard a high-altitude research aircraft. The transmitter for the cloud lidar system is a doubled Nd:YAG laser operating at 5 Hz. The system functions as a fully automated sensor under microprocessor control and operates from a nominal 19-km altitude. Measurements have been acquired over a wide variety of cloud cover in conjunction with passive visible and infrared measurements. Initial observation results are reported

Spinhirne, J. D.↗

Cloud/climate sensitivity experiments

A study of the relationships between large-scale cloud fields and large scale circulation patterns is presented. The basic tool is a multi-level numerical model comprising conservation equations for temperature, water vapor and cloud water and appropriate parameterizations for evaporation, condensation, precipitation and radiative feedbacks. Incorporating an equation for cloud water in a large-scale model is somewhat novel and allows the formation and advection of clouds to be treated explicitly. The model is run on a two-dimensional, vertical-horizontal grid with constant winds. It is shown that cloud cover increases with decreased eddy vertical velocity, decreased horizontal advection, decreased atmospheric temperature, increased surface temperature, and decreased precipitation efficiency. The cloud field is found to be well correlated with the relative humidity field except at the highest levels. When radiative feedbacks are incorporated and the temperature increased by increasing CO2 content, cloud amounts decrease at upper-levels or equivalently cloud top height falls. This reduces the temperature response, especially at upper levels, compared with an experiment in which cloud cover is fixed.

Roads, J. O.↗

Weather satellites: Stereoscopy and Sounding; Proceedings of the Topical Meeting, Ottawa, Canada, May 16-June 2, 1982

Attention is given to the validation of meteorological satellite observing systems and to stereoscopic observations from meteorological satellites. Particular papers are presented on such topics as the comparison of cloud top heights measured by airborne lidar and TIROS-N image data, the determination of surface global radiation using Meteosat images and ground-based visibility measurements, multichannel improvements to satellite-derived global sea surface temperatures, validation of the Stratospheric Sounding Unit, and the international comparison of satellite winds. Also considered is tropical storm structure revealed by stereo photographs from Skylab, stereo imaging from polar orbit and synthetic stereo imaging, simultaneous measurements of sea surface temperature by GMS-1 and GMS-2, and real-time spectroscopic applications using the GOES operational satellites.

Yates, H.↗

Stereoscopic observations of hurricanes and tornadic thunderstorms from geosynchronous satellites

Results are presented which show the application of GOES stereoscopy to the investigation of hurricanes and tornadic thunderstorms. Stereo cloud top height contour maps were constructed to observe the structural evolution of two hurricanes, Frederic on September 12, 1979 and Allen on August 8, 1980, and a tornadic thunderstorm complex over Oklahoma on May 2-3, 1979. Stereo height contours of Hurricane Allen reveal a very intense and symmetric storm with a circular shaped central dense overcast with an average height of 16.5 km. Contours of Hurricane Frederic reveal a preferred region for convection with an explosive exhaust tower attaining a maximum height of 17.8 km. Also presented is a technique for estimating tropical cyclone intensity using GOES stereo height and IR temperature information. Results indicate vertical motions ranging from 4.4 m/s for a moderate storm to 7.7 m/s for an intense storm.

Mack, R.↗

The use of stereoscopic satellite observation in the determination of the emissivity of cirrus

The feasibility of determining cirrus 'emissivity' from combined stereoscopic and infrared satellite observations in conjunction with radiosounding data is investigated for a particular case study. Simultaneous visible images obtained during SESAME-1979 from two geosynchronous GOES meteorological satellites were processed on the NASA Goddard interactive system (AOIPS) and were used to determine the stereo cloud top height Z sub C as described by Hasler (1981). Iso-contours of radiances were outlined on the corresponding infrared image. Total brightness temperature T sub B and ground surface brightness temperature T sub S were inferred from the radiances. The special SESAME network of radiosoundings was used to determine the cloud top temperature T sub CLD at the level defined by Z sub C. The 'effective cirrus emissivity' NE where N is the fractional cirrus cloudiness and E is the emissivity in a GOES infrared picture element of about 10 km x 10 km is then computed from T sub B, T sub S and T sub CLD.

Szejwach, G.↗

Infrared limb-darkening effects for the earth-atmosphere system

An infrared radiative transfer model has been developed for evaluating anisotropic functions in the longwave region (5-50 microns) due to limb-darkening effects in the earth's atmosphere. An accurate narrow-band model of absorption has been used for computing transmission functions of the atmosphere. Absorption due to all major and minor atmospheric constituents has been taken into account including the continuum absorption due to water vapor. Anisotropic functions have been calculated for several latitudinal and seasonal climatological-average model atmospheres. The effects of the variability of various meteorological parameters, e.g. surface temperature, surface relative humidity, and cloud-top height have been examined. It has been found that the variability of cloud parameters has the largest effect on the infrared anisotropic functions.

Gupta, S. K.↗

An interactive system for compositing digital radar and satellite data

This paper describes an approach for compositing digital radar data and GOES satellite data for meteorological analysis. The processing is performed on a user-oriented image processing system, and is designed to be used in the research mode. It has a capability to construct PPIs and three-dimensional CAPPIs using conventional as well as Doppler data, and to composite other types of data. In the remapping of radar data to satellite coordinates, two steps are necessary. First, PPI or CAPPI images are remapped onto a latitude-longitude projection. Then, the radar data are projected into satellite coordinates. The exact spherical trigonometric equations, and the approximations derived for simplifying the computations are given. The use of these approximations appears justified for most meteorological applications. The largest errors in the remapping procedure result from the satellite viewing angle parallax, which varies according to the cloud top height. The horizontal positional error due to this is of the order of the error in the assumed cloud height in mid-latitudes. Examples of PPI and CAPPI data composited with satellite data are given for Hurricane Frederic on 13 September 1979 and for a squall line on 2 May 1979 in Oklahoma.

Heymsfield, G. M.↗

The evolution of Florida thunderstorms on 23 September 1979 as observed by an airborne passive microwave radiometer

The observations made by the aircraft are examined in order to determine sensing parameters for future satellite missions. Minimum brightness temperatures substantially below atmospheric temperatures are revealed in the data. Scattering by an ice layer within the clouds is postulated as the cause. A one-dimensional cloud model initialized with a representative local sounding gives reasonable values for the height and thickness of this ice layer. The model cloud is similar to the observed cloud in both cloud top height and radar reflectivity. A 'mystery' feature observed by the microwave sensors as an area of enhanced scattering, suggesting an updraft core of graupel that in turn is indicative of a convective tower is considered of particular interest. It is noted that this feature was masked in the visible and infrared sensors by the presence of upper-level semitransparent cirrus. The detection of this mystery feature is seen as suggesting that passive microwave sensing of convective areas may provide information regarding the location and/or strength of the more active towers which cannot be detected now with conventional visible or infrared instruments because of a uniform higher-level cloud cover.

Hakkarinen, I. M.↗

Mature thunderstorm cloud top structure - Three-dimensional numerical simulation versus satellite observations

Preliminary results of four runs with a three-dimensional model of the effects of vertical wind shear on cloud top height/temperature structure and the internal properties of isolate midlatitude thunderstorms are reported. The model is being developed as an aid to analyses of GEO remote sensing satellite data. The grid is a 27 x 27 x 20 mesh with 2 km horizontal resolution and 0.9 vertical resolution. The total grid is 54 km on a side and 18 km deep. A second-order Crowley scheme for advecting momentum is extended with a third-order correction for spatial truncation error, and the earth-relative horizontal surface wind components are decreased to 50 percent of their values at 0.45 km. A temperature increase with height is included, together with an initial impulse consisting of a nonrotating cylindrical weak buoyant updraft 10 km in radius. The results of the runs are discussed in terms of the time variation of the vertical velocity extrema, the effects of strong and weak shear on a storm, the cloud top height, the Lagrangian dynamics of a thermal couplet, and data from a real storm.

Schlesinger, R. E.↗

Remote sensing of air-sea interactions

A number of preliminary concepts for the measurement or inference of fluxes across the air-sea interface through remote sensing are proposed. All the methods are achievable from aircraft with state-of-the-art technology. Only one is now ready for space implementation. The focus is on cold outbreaks. Sensible (latent) heat flux is inferred from the difference between initial surface air temperature (vapor mixing ratio) and the downwind SST (and corresponding saturation mixing ratio). The downwind growth rate of the PBL as measured by lidar also provides estimates of surface heating and the cross-inversion entrainment velocity. The lidar also provides a measure of the depth of the inversion and its penetration by surface-forced convection; this permits estimates of the surface heat flux. Lidar and radiometric measurements of cloud top height and temperature provide means of deducing the temperature sounding downstream so that heating is computed with the aid of a known sounding upstream.

Atlas, D.↗

The structure and phase of cloud tops as observed by polarization lidar

High-resolution observations of the structure of cloud tops have been obtained with polarization lidar operated from a high altitude aircraft. Case studies of measurements acquired from cumuliform cloud systems are presented, two from September 1979 observations in the area of Florida and adjacent waters and a third during the May 1981 CCOPE experiment in southeast Montana. Accurate cloud top height structure and relative density of hydrometers are obtained from the lidar return signal intensity. Correlation between the signal return intensity and active updrafts was noted. Thin cirrus overlying developing turrets was observed in some cases. Typical values of the observed backscatter cross section were 0.1-5 (km/sr) for cumulonimbus tops. The depolarization ratio of the lidar signals was a function of the thermodynamic phase of cloud top areas. An increase of the cloud top depolarization with decreasing temperature was found for temperatures above and below -40 C.

Spinhirne, J. D.↗

Thunderstorm cloud top observations using satellite stereoscopy

The present investigation has as objective to take a detailed look at the intense squall line over Oklahoma on May 2-3, 1979, using GOES stereoscopy combined with GOES infrared data. The synoptic situation and data sources are considered along with the stereoscopically observed cloud top ascent rates. Cloud top observations of intense thunderstorms are discussed, taking into account a contouring technique, the interpretation of infrared cloud top temperature patterns, and small-scale structure and its variability. It is found that GOES IR cloud top temperatures grossly underestimate the actual cloud top height observed stereoscopically, especially for immature storms. It is difficult to define growing storms below about 10 km in the GOES infrared data.

Mack, R. A.↗

Inference of cloud temperature and thickness by microwave radiometry from space

The Scanning Multichannel Microwave Radiometer (SMMR) on the Seasat and Nimbus-7 satellites measured microwave radiation at 6.6, 10.69, 18.0, 21.0 and 37.0 GHz with both horizontal and vertical polarizations. Numerical simulations have been performed to explore the potential of using the 18.0, 21.0 and 37.0 GHz SMMR channels with simultaneous infrared measurements of cloud top height for retrieving cloud temperature differential and thickness over the ocean. The results suggest it is possible to infer cloud vertical thickness to approximately 0.4 km rms accuracy and cloud temperature differential to approximately 3 C rms. These accuracies are approximately half the a priori variances.

Pandey, P. C.↗

Thunderstorm cloud height-rainfall rate relations for use with satellite rainfall estimation techniques

Observational studies of thunderstorm cloud height-rainfall rate and cloud height-volume rainfall rate relations are reviewed with significant variations being noted among climatological regimes. Analysis of the Florida (summer) and Oklahoma (spring) relations are made using a one-dimensional cloud model to ascertain the important factors in determining the individual cloud-rain relations and the differences between the two regimes. In general, the observed relations are well simulated by the model-based calculations. The generally lower predicted rain rates in Oklahoma (as compared to Florida) result from lower precipitation efficiencies which are due to a combination of larger entrainment (related to larger vertical wind shear) and drier environment. The generally steeper slope of the Oklahoma rain rate height curves is shown to be due to a stronger variation in maximum vertical velocity with cloud top height, which, in turn, is related to the greater static stability in the range of cloud tops. The impact of the regime-to-regime variations on empirical rain estimation schemes based on satellite-observed cloud height or cloud temperature information is discussed and a rain estimation approach based on model-generated cloud-rain relations is outlined.

Adler, R. F.↗

Satellite data - Analysis techniques and applications to meteorology

The history of meteorological satellites is traced, together with current instrumental and data analysis capabilities. Photographs taken from rockets launched in the late 1950s encouraged placing spacecraft such as the Nimbus I in sunsynchronous orbit beginning in 1964, and eventually the GOES, GMS, TIROS and Meteosat spacecraft into GEO in the 1970s. Visible, UV, IR and microwave sensors provide data on cloud patterns, wind fields, vertical temperature and humidity profiles and the surface temperature. Corrections have been developed in the data analyses programs to account for the atmospheric effects on upwelling radiation, fractional cloudiness, cloud-top heights and cloud contamination factors.

Szejwach, G.↗