Search NASA⌕ Search

SEARCH · Search NASA

Results for “collision avoidance region”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

An Orthogonal Recursive Bisection (ORB) Based Time Advancement Algorithm for CFD-DEM Solvers

The time integration of the granular phase in coupled computational fluid dynamics (CFD) – discrete element method (DEM) simulations presents a unique computational challenge brought about by the large variations in particle collisional time scales. Particles in the dilute regions of the computational domain can be advanced with large time steps while dense regions require much smaller time increments. However, the time step size in most solvers is globally set as the limit for accuracy and stability imposed by the collisions and is typically orders of magnitude less than that required away from collisions. This work addresses this precise issue and provides a strategy to avoid the use of a global conservative small time step size for the entire set of particles.A novel time stepping algorithm for CFD-DEM solvers using a partitioning approach using orthogonal recursive bisection (ORB) that allows for variable time steps among particles is described and its computational performance is compared against baseline explicit methods, typically used in several CFD-DEM solvers. ORB has advantages of being relatively quick and easy to update incrementally and has the required heuristic behavior (i.e., it will split the region in half with a cluster on each side) when groups of particles are well separated (clustered). The algorithm presented in this work uses a local time stepping approach to resolve collisional time scales for subsets of particles that are present at the leaves of the ORB, thereby resulting in substantial reduction of computational cost. The parallel implementation of this method where a ``knapsack” algorithm is used in tandem with ORB for effective load-balancing is also presented, where a best possible partitioning is obtained based on number of particles and local time-stepping costs. The algorithm is tested against benchmark problems with varying particle distributions that include fluidized bed and riser flow scenarios. Preliminary results indicate that the approach is 2-3X faster than traditional explicit methods for problems that involve both dense and dilute regions, while maintaining the same level of accuracy.

adaptive timestepping↗

Effects of gamma-ray, neutrino, and particle production on the energetics and dynamics of compact extragalactic radio sources

Consideration is given to particle production and high-energy radiation within apparently superluminal radio components of extragalactic radio sources forming within the apparent region of nuclear activity of a quasar or active galaxy. The physical conditions in compact components observed as radio emitters are derived for the quasars 3C 273 and 3C 345 and extrapolated to those of initial components of sizes on the order of 10 to the 15th cm on the basis of two-dimensional relativistic jet and relativistic three-dimensional models of component expansion. Probabilities that a given particle avoids an inelastic collision in the relativistic plasma are calculated for both cases which show that collisions which produce particles and radiation may be very important during the formation of a compact radio component. The consequences of electron-positron production, bremsstrahlung and proton-proton inelastic collisions ultimately giving rise to neutrinos and gamma rays for the development and energetics of the radio component are then examined, and upper limits to the amount of energy which can be channeled into radio components from an active region without giving rise to a high-energy X-ray source are derived.

Vestrand, W. T.↗

Beam-beam experience in RHIC

The Relativistic Heavy Ion Collider RHIC consists of two superconducting storage rings that intersect at six locations around the ring circumference. Two of these interaction regions are currently equipped with experiment detectors, namely STAR at the “6 o’clock” interaction point (IP), and PHENIX at “8 o’clock”. The two beams collide only at these two interaction regions, while they are vertically separated by typically 6-10mm at the other IPs. Together with the separator dipoles located at roughly 10m from the IP, and a distance between bunches of 30m, this avoids any parasitic beam-beam collisions. RHIC is capable of colliding any ion species at magnetic rigidities up to B × r = 830T × m , corresponding to 250 GeV for proton beams, or 100 GeV/n for fully stripped gold ions.

43 PARTICLE ACCELERATORS↗

A quantitative account of electron energy transport in a National Spherical Tokamak Experiment plasma

The first successful quantitative account of the electron thermal conductivity {chi}{sub e} in a tokamak experiment due to imperfect magnetic surfaces is presented. The unstable spectrum of microtearing instabilities is calculated with the GS2 code for a well-behaved H-mode plasma in the National Spherical Tokamak Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000)], with 6 MW deuterium neutral beam heating at I{sub p}=0.75 MA, B{sub t}=0.5 T. The application of existing nonlinear theory shows that the unstable modes can produce overlapping magnetic islands leading to global stochastic magnetic fields. The calculated {chi}{sub e} based on the present theory is in reasonable agreement with the values from transport analysis of the experimental data over the entire region (0.4<r/a<0.75) where the electron temperature gradient is strong enough to make microtearing the most unstable mode. There is no adjustable parameter in this comparison. This instability can be avoided by reversed magnetic shear or by heating the electrons to lower the electron-ion collision frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisional alpha transport in a weakly non-quasisymmetric stellarator magnetic field</strong

Alpha particle confinement is a serious concern in stellarators and provides strong motivation for optimizing magnetic field configurations. In addition to the collisionless confinement of trapped alphas in stellarators, excessive collisional transport of the trapped alpha particles must be avoided while they tangentially drift due to the magnetic gradient (the ∇B drift).The combination of pitch angle scatter off the background ions and the ∇B drift gives rise to two narrow boundary layers in the trapped region. The first is at the trapped–passing boundary and enables the finite trapped response to be matched to the vanishing passing response of the alphas. The second layer is a region that encompasses the somewhat more deeply trapped alphas with vanishing tangential ∇B drift. Away from (and between) these boundary layers, collisions are ineffective and the alpha ∇B drift simply balances the small radial drift of the trapped alphas. As this balance does not vanish as the trapped–passing boundary is approached, the first collisional boundary layer is necessary and gives rise to $\sqrt{v}$ transport, with v the collision frequency. The vanishing of the tangential drift results in a separate, somewhat wider boundary layer, and significantly stronger superbanana plateau transport that is independent of collisionality. The constraint imposed by the need to avoid significant energy depletion loss in the slowing down tail distribution function sets the allowed departure of a stellarator from an optimal quasisymmetric configuration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisional alpha transport in a weakly non-quasisymmetric stellarator magnetic field

Alpha particle confinement is a serious concern in stellarators and provides strong motivation for optimizing magnetic field configurations. In addition to the collisionless confinement of trapped alphas in stellarators, excessive collisional transport of the trapped alpha particles must be avoided while they tangentially drift due to the magnetic gradient (the ∇B drift). The combination of pitch angle scatter off the background ions and the ∇B drift gives rise to two narrow boundary layers in the trapped region. The first is at the trapped-passing boundary and enables the finite trapped response to be matched to the vanishing passing response of the alphas. The second layer is a region that encompasses the somewhat more deeply trapped alphas with vanishing tangential ∇B drift. Away from (and between) these boundary layers, collisions are ineffective and the alpha ∇B drift simply balances the small radial drift of the trapped alphas. As this balance does not vanish as the trapped-passing boundary is approached, the first collisional boundary layer is necessary and gives rise to √ν transport, with ν the collision frequency. The vanishing of the tangential drift results in a separate, somewhat wider boundary layer, and significantly stronger superbanana plateau transport that is independent of collisionality. The constraint imposed by the need to avoid significant energy depletion loss in the slowing down tail distribution function sets the allowed departure of a stellarator from an optimal quasisymmetric configuration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

International assessment of priority environmental issues for land-based and offshore wind energy development

Non-technical summary A substantial increase in wind energy deployment worldwide is required to help achieve international targets for decreasing global carbon emissions and limiting the impacts of climate change. In response to global concerns regarding the environmental effects of wind energy, the International Energy Agency Wind Technical Collaborative Program initiated Task 34 – Working Together to Resolve Environmental Effects of Wind Energy or WREN. As part of WREN, this study performed an international assessment with the global wind energy and environmental community to determine priority environmental issues over the next 5‒10 years and help support collaborative interactions among researchers, developers, regulators, and stakeholders. Technical summary A systematic assessment was performed using feedback from the international community to identify priority environmental issues for land-based and offshore wind energy development. Given the global nature of wind energy development, feedback was of interest from all countries where such development is underway or planned to help meet United Nations Intergovernmental Panel on Climate Change targets. The assessment prioritized environmental issues over the next 5–10 years associated with wind energy development and received a total of 294 responses from 28 countries. For land-based wind, the highest-ranked issues included turbine collision risk for volant species (birds and bats), cumulative effects on species and ecosystems, and indirect effects such as avoidance and displacement. For offshore wind, the highest-ranked issues included cumulative effects, turbine collision risk, underwater noise (e.g. marine mammals and fish), and displacement. Emerging considerations for these priorities include potential application to future technologies (e.g. larger turbines and floating turbines), new stressors and species in frontier regions, and cumulative effects for multiple projects at a regional scale. For both land-based and offshore wind, effectiveness of minimization measures (e.g. detection and deterrence technologies) and costs for monitoring, minimization, and mitigation were identified as overarching challenges. Social media summary Turbine collisions and cumulative effects among the international environmental priorities for wind energy development.

17 WIND ENERGY↗

The Effects of Solar Maximum on the Earth's Satellite Population and Space Situational Awareness

The rapidly approaching maximum of Solar Cycle 24 will have wide-ranging effects not only on the number and distribution of resident space objects, but also on vital aspects of space situational awareness, including conjunction assessment processes. The best known consequence of high solar activity is an increase in the density of the thermosphere, which, in turn, increases drag on the vast majority of objects in low Earth orbit. The most prominent evidence of this is seen in a dramatic increase in space object reentries. Due to the massive amounts of new debris created by the fragmentations of Fengyun-1C, Cosmos 2251 and Iridium 33 during the recent period of Solar Minimum, this effect might reach epic levels. However, space surveillance systems are also affected, both directly and indirectly, historically leading to an increase in the number of lost satellites and in the routine accuracy of the calculation of their orbits. Thus, at a time when more objects are drifting through regions containing exceptionally high-value assets, such as the International Space Station and remote sensing satellites, their position uncertainties increase. In other words, as the possibility of damaging and catastrophic collisions increases, our ability to protect space systems is degraded. Potential countermeasures include adjustments to space surveillance techniques and the resetting of collision avoidance maneuver thresholds.

Johnson, Nicholas L.↗

KIVA-4mpi

KIVA-4mpi is a transient, three-dimensional, multi-phase, multicomponent code for the analysis of chemically reacting flows with sprays has been under development at the Los Alamos National Laboratory for the past several years. The code uses an Arbitrary Lagrangian Eulerian (ALE) methodology on a staggered grid, and discretizes space using the finite-volume technique. This version is a parallel version which uses the Mpich libraries for communication of information as needed by the various distributed processing units. The domain is decomposed or formed into a distributed system using Metis or some local tools for specify which cells/nodes are on what processor. The code uses an implicit time-advancement with the exception of the advective terms that are cast in an explicit but second-order monotonicity-preserving manner. Also, the convection calculations can be subcycled in the desired regions to avoid restricting the time step due to Courant conditions. The range of validity of the code extends from low speeds to supersonic flows for both laminar and turbulent regimes. Arbitrary numbers of species and chemical reactions are allowed. A stochastic particle method is used to calculate evaporating liquid sprays, including the effects of droplet collisions and aerodynamic breakups. Although specifically designed for performing internal combustion engine calculations, the modularity of the code allows it for easy modifications for solving a variety of hydrodynamics problems involving chemical reactions. The code has found a widespread application in the automotive industry.

Torres, David↗

KIVA-4

KIVA-4 is a transient, three-dimensional, multi-phase, multi-component code for the analysis of chemically reacting flows with sprays has been under development at the Los Alamos National Laboratory for the past several years. The code uses an Arbitrary Lagrangian Eulerian (ALE) methodology on a staggered grid, and discretizes space using the finite-volume technique. The code uses an implicit time-advancement with the exception of the advective terms that are cast in an explicit but second-order monotonicity-preserving manner. Also, the convection calculations can be subcycled in the desired regions to avoid restricting the time step due to Courant conditions. The range of validity of the code extends from low speeds to supersonic flows for both laminar and turbulent regimes. Arbitrary numbers of species and chemical reactions are allowed. A stochastic particle method is used to calculate evaporating liquid sprays, including the effects of droplet collisions and aerodynamic breakups. Although specifically designed for performing internal combustion engine calculations, the modularity of the code allows it for easy modifications for solving a variety of hydrodynamics problems involving chemical reactions. The code has found a widespread application in the automotive industry.

Torres, David↗

SU-E-T-754: Three-Dimensional Patient Modeling Using Photogrammetry for Collision Avoidance

Purpose: To evaluate photogrammetry for creating a three-dimensional patient model. Methods: A mannequin was configured on the couch of a CT scanner to simulate a patient setup using an indexed positioning device. A CT fiducial was placed on the indexed CT table-overlay at the reference index position. Two dimensional photogrammetry targets were placed on the table in known positions. A digital SLR camera was used to obtain 27 images from different positions around the CT table. The images were imported into a commercial photogrammetry package and a 3D model constructed. Each photogrammetry target was identified on 2 to 5 images. The CT DICOM metadata and the position of the CT fiducial were used to calculate the coordinates of the photogrammetry targets in the CT image frame of reference. The coordinates were transferred to the photogrammetry software to orient the 3D model. The mannequin setup was transferred to the treatment couch of a linear accelerator and positioned at isocenter using in-room lasers. The treatment couch coordinates were noted and compared with prediction. The collision free regions were measured over the full range of gantry and table motion and were compared with predictions obtained using a general purpose polygon interference algorithm. Results: The reconstructed 3D model consisted of 180000 triangles. The difference between the predicted and measured couch positions were 5 mm, 1 mm, and 1 mm for longitudinal, lateral, and vertical, respectively. The collision prediction tested 64620 gantry table combinations in 11.1 seconds. The accuracy was 96.5%, with false positive and negative results occurring at the boundaries of the collision space. Conclusion: Photogrammetry can be used as a tool for collision avoidance during treatment planning. The results indicate that a buffer zone is necessary to avoid false negatives at the boundary of the collision-free zone. Testing with human patients is underway. Research partially supported by a grant from Varian Medical Systems.

60 APPLIED LIFE SCIENCES↗

Comprehensive kinetic analysis of the plasma-wall transition layer in a strongly tilted magnetic field

The magnetized plasma-wall transition (MPWT) layer at the presence of the obliquity of the magnetic field to the wall consists of three sub-layers: the Debye sheath (DS), the magnetic pre-sheath (MPS), and the collisional pre-sheath (CPS) with characteristic lengths λ{sub D} (electron Debye length), ρ{sub i} (ion gyro-radius), and ℓ (the smallest relevant collision length), respectively. Tokamak plasmas are usually assumed to have the ordering λ{sub D}≪ρ{sub i}≪ℓ, when the above-mentioned sub-layers can be distinctly distinguished. In the limits of ε{sub Dm}(λ{sub D}/ρ{sub i})→0 and ε{sub mc}(ρ{sub i}/ℓ)→0 (“asymptotic three-scale (A3S) limits”), these sub-layers are precisely defined. Using the smallness of the tilting angle of the magnetic field to the wall, the ion distribution functions are found for three sub-regions in the analytic form. The equations and characteristic length-scales governing the transition (intermediate) regions between the neighboring sub-layers (CPS – MPS and MPS – DS) are derived, allowing to avoid the singularities arising from the ε{sub Dm}→0 and ε{sub mc}→0 approximations. The MPS entrance and the related kinetic form of the Bohm–Chodura condition are successfully defined for the first time. At the DS entrance, the Bohm condition maintains its usual form. The results encourage further study and understanding of physics of the MPWT layers in the modern plasma facilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Autonomous Aircraft Operations using RTCA Guidelines for Airborne Conflict Management

A human-in-the-loop experiment was performed at the NASA Langley Research Center to study the feasibility of DAG-TM autonomous aircraft operations in highly constrained airspace. The airspace was constrained by a pair of special-use airspace (SUA) regions on either side of the pilot's planned route. Traffic flow management (TFM) constraints were imposed as a required time of arrival and crossing altitude at an en route fix. Key guidelines from the RTCA Airborne Conflict Management (ACM) concept were applied to autonomous aircraft operations for this experiment. These concepts included the RTCA ACM definitions of distinct conflict detection and collision avoidance zones, and the use of a graded system of conflict alerts for the flight crew. Three studies were conducted in the course of the experiment. The first study investigated the effect of hazard proximity upon pilot ability to meet constraints and solve conflict situations. The second study investigated pilot use of the airborne tools when faced with an unexpected loss of separation (LOS). The third study explored pilot interactions in an over-constrained conflict situation, with and without priority rules dictating who should move first. Detailed results from these studies were presented at the 5th USA/Europe Air Traffic Management R&D Seminar (ATM2003). This overview paper focuses on the integration of the RTCA ACM concept into autonomous aircraft operations in highly constrained situations, and provides an overview of the results presented at the ATM2003 seminar. These results, together with previously reported studies, continue to support the feasibility of autonomous aircraft operations.

Krishnamurthy, Karthik↗

Autonomous Spacecraft Inspection with Free-Flying Drones

This paper describes a proof-of-concept mission demonstrating a multi-agent system performing visual inspection of damage sustained by a spacecraft. Free-flying satellites, simulated by unmanned aerial vehicles (UAVs), autonomously fly around a mock space module maximizing the search space for damage detection. The free-flyers are responsible for independently coordinating their flights to avoid collision with the space module and each other, while executing mission tasks. Damage analysis on the surface of the mock space module is performed in real-time using video from each free-flyer. Three-dimensional modeling is deployed offline to supplement and improve damage detection. This approach demonstrates the feasibility of deploying real space systems for damage detection, where 2D analysis can quickly determine region of interest and 3D visualization can produce a human-navigable virtual environment with depth perspective for further investigation.

unmanned aerial vehicle (UAV)↗

Communication: Partial linearized density matrix dynamics for dissipative, non-adiabatic quantum evolution

An approach for treating dissipative, non-adiabatic quantum dynamics in general model systems at finite temperature based on linearizing the density matrix evolution in the forward-backward path difference for the environment degrees of freedom is presented. We demonstrate that the approach can capture both short time coherent quantum dynamics and long time thermal equilibration in an application to excitation energy transfer in a model photosynthetic light harvesting complex. Results are also presented for some nonadiabatic scattering models which indicate that, even though the method is based on a ''mean trajectory'' like scheme, it can accurately capture electronic population branching through multiple avoided crossing regions and that the approach offers a robust and reliable way to treat quantum dynamical phenomena in a wide range of condensed phase applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Adaptive Timestepping Algorithm for Particle Time Integration in Coupled CFD-DEM Simulations

Coupled Computational Fluid Dynamics(CFD) - Discrete Element Method (DEM) models provide an accurate description of multiphase physical systems where a granular phase exists in an underlying continuous medium. The time integration of the granular phase in these simulations are typically handled using an explicit time integration scheme with a global time step that is much smaller than fluid time scales, in order to resolve inter-particle collisions. An adapative time integration technique that avoids this global constraint for the granular phase is presented in this work. The algorithm involves the use of a local time stepping approach to resolve collisional time scales for only a subset of particles that are in close proximity to potential collision partners, thereby resulting in substantial reduction of computational cost. This approach is observed to be 2-3X faster than traditional explicit methods for problems that involve both dense and dilute regions, while maintaining the same level of accuracy.

97 MATHEMATICS AND COMPUTING↗

On-the-fly generation of differential resonance scattering probability distribution functions for Monte Carlo codes

Current Monte Carlo codes use one of three models to model neutron scattering in the epithermal energy range: (1) the asymptotic scattering model, (2) the free gas scattering model, or (3) the S({alpha},{beta}) model, depending on the neutron energy and the specific Monte Carlo code. The free gas scattering model assumes the scattering cross section is constant over the neutron energy range, which is usually a good approximation for light nuclei, but not for heavy nuclei where the scattering cross section may have several resonances in the epithermal region. Several researchers in the field have shown that using the free gas scattering model in the vicinity of the resonances in the lower epithermal range can under-predict resonance absorption due to the up-scattering phenomenon. Existing methods all involve performing the collision analysis in the center-of-mass frame, followed by a conversion back to the laboratory frame. In this paper, we will present a new sampling methodology that (1) accounts for the energy-dependent scattering cross sections in the collision analysis and (2) acts in the laboratory frame, avoiding the conversion to the center-of-mass frame. The energy dependence of the scattering cross section was modeled with even-ordered polynomials to approximate the scattering cross section in Blackshaw's equations for the moments of the differential scattering PDFs. These moments were used to sample the outgoing neutron speed and angle in the laboratory frame on-the-fly during the random walk of the neutron. Results for criticality studies on fuel pin and fuel assembly calculations using these methods showed very close comparison to results using the reference Doppler-broadened rejection correction (DBRC) scheme. (authors)

97 MATHEMATICS AND COMPUTING↗

The Top 10 Questions for Active Debris Removal

This slide presentation reviews the requirement and issues around removal of debris from the earth orbital environment. The 10 questions discussed are: 1. Which region (LEO/MEO/GEO) has the fastest projected growth rate and the highest collision activities? 2. Can the commonly-adopted mitigation measures stabilize the future environment? 3. What are the objectives of active debris removal (ADR)? 4. How can effective ADR target selection criteria to stabilize the future LEO environment be defined? 5. What are the keys to remediate the future LEO environment? 6. What is the timeframe for ADR implementation? 7. What is the effect of practical/operational constraints? 8. What are the collision probabilities and masses of the current objects? 9. What are the benefits of collision avoidance maneuvers? 10. What is the next step?

Liou, J. -C.↗