Search NASA⌕ Search

SEARCH · Search NASA

Results for “concentrated solid-solution alloy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

35 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High radiation tolerance of an ultrastrong nanostructured NiCoCr alloy with stable dispersed nanooxides and fine grain structure

The present paper reports the irradiation behavior of nanostructured NiCoCr medium entropy alloy enhanced by Y-Hf-O nanooxides and fine grains produced by powder metallurgy. Ion beam irradiation to a peak dose of 130 dpa at 580°C produced neither detectable void swelling nor irradiation-induced hardening, in contrast to significant void swelling and property degradation of single phase NiCoCr concentrated solid-solution alloy under the similar irradiation condition. The dispersed nanooxides and high density of grain boundaries act as defect sinks that effectively annihilate irradiation-induced interstitials and vacancies. Furthermore, high-density nanooxides maintain their crystalline structures and stabilize the grain boundaries during irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin

Medium- and high-entropy alloys based on the CrCoNi-system have been shown to display outstanding strength, tensile ductility and fracture toughness (damage-tolerance properties), especially at cryogenic temperatures. Here we examine the J Ic and (back-calculated) K JIc fracture toughness values of the face-centered cubic, equiatomic CrCoNi and CrMnFeCoNi alloys at 20 K. At flow stress values of ~1.5 GPa, crack-initiation K JIc toughnesses were found to be exceptionally high, respectively 235 and 415 MPa√m for CrMnFeCoNi and CrCoNi, with the latter displaying a crack-growth toughness K ss exceeding 540 MPa√m after 2.25 mm of stable cracking, which to our knowledge is the highest such value ever reported. Characterization of the crack-tip regions in CrCoNi by scanning electron and transmission electron microscopy reveal deformation structures at 20 K that are quite distinct from those at higher temperatures and involve heterogeneous nucleation, but restricted growth, of stacking faults and fine nanotwins, together with transformation to the hexagonal closed-packed phase. The coherent interfaces of these features can promote both the arrest and transmission of dislocations to generate respectively strength and ductility which strongly contributes to sustained strain hardening. Indeed, we believe that these nominally single-phase, concentrated solid-solution alloys develop their fracture resistance through a progressive synergy of deformation mechanisms, including dislocation glide, stacking-fault formation, nano-twinning and eventually in situ phase transformation, all of which serve to extend continuous strain hardening which simultaneously elevates strength and ductility (by delaying plastic instability), leading to truly exceptional resistance to fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The microstructure and He + ion irradiation behavior of novel low-activation W-Ta-Cr-V refractory high entropy alloy for nuclear applications

Microstructure and nanohardness of a nearly equimolar W-Ta-Cr-V high entropy alloy (HEA), as well as its irradiation response under He + irradiation, were investigated. The single-phase body-centered cubic nanostructured alloy with a 1 µm thick layer was fabricated on a silicon substrate using a magnetron sputtering method. The HEA film has a complex microstructure consisting of micrometric domains that exhibit internal nanostructure controlled by their crystal orientation. The measured nanohardness of the W-Ta-Cr-V alloy is 13 ± 2 GPa, which significantly exceeds the hardness of nanocrystalline tungsten as a result of the high solid-solution strengthening effect. In order to evaluate the irradiation resistance of the HEA film, the material was irradiated with 200 keV He + ions at room temperature, with two different ion fluences: 1 × 10 16 and 5 × 10 16 ions/cm 2 . Using transmission electron microscopy, a high density of extremely fine He bubbles is observed that were uniformly distributed in the matrix. The increase of He + ion fluence increased the density of bubbles, whereas their size remained at a similar level, which indicates that the damage proceeds by the nucleation of additional He bubbles, not by their growth.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Electron-phonon coupling induced defect recovery and strain relaxation in Ni and equiatomic NiFe alloy

In this work, we study the effects of local heating due to electron-phonon coupling in cumulative 10 MeV Ni ion irradiation on pre-damaged pure Ni and equiatomic NiFe alloy. In particular, we estimate the defect recovery in NiFe compared to pure Ni due to the chemical disorder. Furthermore, the simulations are done using the two-temperature molecular dynamics approach that includes the electronic stopping and electron-phonon interactions. A total of 50% of the damage that consists of isolated point defects and small defect clusters is recovered in NiFe, whereas no noticeable recovery is observed in elemental Ni. We have also demonstrated strain relaxation associated with defect recombination based on the results from both simulation and X-ray diffraction measurements in NiFe. The damage recovery primarily depends on pre-existing damage level, defect configuration, ion energy (stopping powers) and electron-phonon coupling parameter of the materials of interest.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Role of electrons in collision cascades in solids. I. Dissipative model

In this article, we present a detailed model for the nonadiabatic coupling between ions and electrons in energetic ion-solid interactions over a wide range of energies in concentrated solid-solution fcc alloys of the 3d transition metals Ni, Co, Fe, and Cr. The model is based on general statistical mechanical principles and results in a stochastic modification of the classical nuclei motion which is parameterized by the first-principles calculation of a dissipation function produced by explicit time-dependent electronic evolution. This model provides a full picture of an entire collision process, from the ballistic to the thermal phases of a cascade, giving a detailed description of the energy exchange between ions and electrons till their final thermalization, removing in this way some ad hoc assumptions used in the state-of-the-art atomistic two-temperature models. Here, this work is separated in two papers; in the present Part I, we report on the ab initio methodology used to translate stopping power and electron-phonon interaction into a parameterized dissipation function; Part II, to be published, addresses the nonadiabatic ion dynamics using our modified Langevin dynamics [Tamm et al. Phys. Rev. Lett. 120, 185501 (2018)] applying the dissipation functions developed here to specific collision cascade events.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1986

Acoustoelastic constants in dilute two-phase alloys

Acoustoelastic constants are calculated for two-phase alloys containing dilute concentrations of precipitates in a solid-solution matrix, on the basis of a model in which the precipitates are represented as a dilute elastic suspension of spherical particle inclusions in an infinite matrix. The longitudinal propagation velocity in the alloy is thereby obtained in terms of the precipitates' concentration and the elastic moduli of the two phases. Results are presented which indicate that the acoustoelastic constant of longitudinal waves in a dilute two-phase alloy varies linearly with the concentration of second-phase precipitates, in agreement with recent measurements in aluminum and steel alloys where the acoustoelastic constants changed linearly with the second phase's volume fraction.

Salama, K.↗
DOE OSTI2025

Solid solutions limited by grain-boundary solute clustering in ultrafine-grained alloys

Immiscible Ag-Cu alloys exhibit complex behavior due to varying Cu solid solubilities reported under equilibrium and metastable conditions. In ultrafine-grained alloys, these limits are further complicated by a high fraction of grain boundaries, where solute atoms tend to segregate and, in some cases, form clusters. Here, this study investigates the influence of Cu solute segregation and clustering on solid-solution limits in ultrafine-grained Ag-Cu alloys synthesized by magnetron sputtering with varying Cu content. X-ray diffraction peak shifts reveal a solid-solution concentration plateau for Cu contents from 4.9 to 11.7 at %, in contrast to the peak shifts predicted by density-functional theory for Ag-Cu alloys. Scanning transmission electron microscopy further reveals limited solid solubility and the formation of numerous Cu-rich clusters at grain boundaries. Atomistic simulations demonstrate that such limited solubility does not arise from grain boundary segregation alone, but only when strong solute-solute interactions promote the formation of grain-boundary Cu solute clusters.

Density-functional theory↗
DOE OSTI2020

First-principles prediction of incipient order in arbitrary high-entropy alloys: exemplified in Ti 0.25 CrFeNiAl

High-temperature disordered multi-component alloys, including high-entropy alloys, experience either segregation or partially-ordered phases to reach low-temperature phases. For Ti 0.25 CrFeNiAl x (0 ≤ x ≤ 1), experiments suggest a partially-ordered B2 phase, whereas CALculation of PHAse Diagrams (CALPHAD) predicts a region of L21+B2 coexistence. We employ first-principles KKR-CPA to assess stability of phases with arbitrary order and a KKR-CPA linear-response theory to predict atomic short-range order (SRO) in the disorder phase that reveals the competing long-range ordered (LRO) phases in a given Bravais lattice. The favorable SRO provides a specific concentration-waves (site occupation probabilities and partially-ordered unit cells) and estimated energy gains that can then be assess directly by KKR-CPA formation enthalpies. Our results are in good agreement with experiments and CALPHAD in Al-poor regions (x ≤ 0.75) and with CALPHAD in Al-rich region (1≥ x >0.75). Our first-principles KKR-CPA and SRO-based concentration-wave analysis is shown to be a powerful and fast method to assess competing LRO phases in complex solid-solution alloys, and our results suggests more careful experiments in Al-rich region are needed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Lattice Distortion and Phase Stability of Pd-Doped NiCoFeCr Solid-Solution Alloys

In the present study, we have revealed that (NiCoFeCr)100−xPdx (x= 1, 3, 5, 20 atom%) high-entropy alloys (HEAs) have both local- and long-range lattice distortions by utilizing X-ray total scattering, X-ray diffraction, and extended X-ray absorption fine structure methods. The local lattice distortion determined by the lattice constant difference between the local and average structures was found to be proportional to the Pd content. A small amount of Pd-doping (1 atom%) yields long-range lattice distortion, which is demonstrated by a larger (200) lattice plane spacing than the expected value from an average structure, however, the degree of long-range lattice distortion is not sensitive to the Pd concentration. The structural stability of these distorted HEAs under high-pressure was also examined. The experimental results indicate that doping with a small amount of Pd significantly enhances the stability of the fcc phase by increasing the fcc-to-hcp transformation pressure from ~13.0 GPa in NiCoFeCr to 20–26 GPa in the Pd-doped HEAs and NiCoFeCrPd maintains its fcc lattice up to 74 GPa, the maximum pressure that the current experiments have reached.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Creep and Fatigue Characterization of High Strength Alloy Thin Sections in Advanced CO2 Heat Exchangers

The objective of this work was to characterize and model elevated temperature creep and fatigue behavior for thin sheet and foil forms of gamma-prime strengthened alloys in wrought form and as-processed folded and brazed constructions. This work was motivated by the demanding temperature and pressure service conditions of the GEN3 Concentrated Solar Power (CSP) and supercritical CO2 (sCO2) power cycle working fluid. More specifically, the possibility of leveraging the superior creep strength of gamma-prime alloys in folded-fin and brazed-plate heat exchanger constructions. Gamma-prime alloys represent a step-change in raw-material strength over solid-solution strengthened alloys. And the folded-fin and brazed-plate heat exchanger architecture is lightweight and leverages cost-effective material stock forms. The investigation contained two parallel paths. (1) The first is referred to as a fundamental investigation where Oak Ridge National Laboratory conducts uniaxial creep testing on thin sheet and foil in wrought form. This effort aimed to serve as a benchmark against a relatively sparse existing database and a baseline comparison for path number 2. (2) The second path is referred to as the practical investigation where Brayton Energy manufactures plate-fin heat exchangers and performs pressurized creep and fatigue testing. This effort aimed to de-risk heat exchanger manufacturing process for service under sCO2 CSP conditions. A total of 14 uniaxial creep tests were completed using Haynes 282 thin sheet and foil. A variety of heat treatments were specified to coincide with path number 2. Baseline metallography of test samples and creep strength performance are contained. Benchmarks relatively to existing thick-form Haynes 282 are made, as well as to other thin-form Nickel-based superalloys. Description of a wrought-form modeling approach for thin gamma-prime alloys is also discussed. A total of 11 pressurized creep and fatigue tests were completed successfully with Haynes 282 heat exchanger prototypes. Manufacturing processing details, testing details, testing results, and failure analysis are discussed. Additionally, creep modeling techniques to predict failure are discussed, and modeling to support technological-to-market. In conclusion, Haynes 282 foils were demonstrated to yield rupture two-to-three orders of magnitude higher than Haynes 230 foils under similar conditions. And the manufactured heat exchanger prototypes demonstrated strength similar to the wrought constituents. Both of which contribute to elevated performance potential or cost savings in practice. Discussion is included.

14 SOLAR ENERGY↗
DOE OSTI2025

Additively-manufactured Al-0.3Zr-0.2Ce-0.2Cu alloy with high creep resistance and electrical conductivity

Here, a new, solute-lean Al-0.3Zr-0.2Ce-0.2Cu (wt.%) alloy is developed for additive manufacturing that overcomes the classical tradeoff between conductivity and creep resistance. The rapid-cooling-enabled supersaturation of Zr, and its uniform distribution in α-Al matrix, along with formation of submicron (Ce,Cu)-rich intermetallic particles on solidification lead to unusually high creep resistance at 200 °C. Near-zero secondary creep rates are achieved up to the alloy yield stress (YS) of 65 MPa at 200 °C in as-fabricated state. The Zr-solute-induced dislocation-climb suppression mechanism underlying this improvement also restricts dynamic recovery above YS, as noted from appreciable primary creep and its transitioning to near-zero secondary creep rates. A combination of relatively coarse, epitaxially-grown α-Al grains, low Zr concentration in α-Al, and the impurity-scavenging effect of Ce to purify α-Al matrix produces high electrical conductivity of ∼48 %IACS. Aging precipitation of L1 2 -Al 3 Zr nanoprecipitates doubles the YS (to ∼150 MPa) at room temperature and increases alloy conductivity to ∼58 %IACS, but loss of solid-solution Zr out of α-Al matrix leads to activation of dislocation climb, degrading the creep properties as compared to the supersaturated Al-Zr solid solution in the as-fabricated state. Compared to L1 2 -Al 3 Zr nanoprecipitates, submicron (Ce,Cu)-rich particles formed on solidification are more effective at impeding dislocation climb, producing a threshold stress for dislocation creep of ∼ 50 MPa at 200 °C. The new alloy design concepts, especially solute-induced dislocation-climb suppression for creep resistance, explored here may pave way for the design of new metallic alloys for thermal/electrical conductors and other high-temperature applications.

Additive Manufacturing↗
DOE OSTI2018

Evolution of carbide precipitates in Hastelloy N joints during welding and post weld heat treatment

Highlights: • The formation and spheroidization of the eutectic-like carbides are found in the Hastelloy N alloy during welding and PWHT. • All precipitates in the joints before and after the PWHT are identified as a M{sub 6}C type carbide with different morphology. • The diffusion of main element of Mo leads to the decrease of lattice parameter of the carbide during the welding and PWHT. - Abstract: The effects of welding and post weld heat treatment (PWHT) on the morphology, composition and lattice parameter of the precipitates in the welding joints of Hastelloy N alloy have been investigated. Joint samples were prepared using a gas tungsten arc welding process with ERNiMo-2 fillers, and then solid-solution treated at 1100 °C for 20 min. After welding, eutectic M{sub 6}C carbides can be observed in the heat affected zones (HAZ) and weld zones (WZ). These eutectic M{sub 6}C carbides become spheroidized during the following PWHT. The concentration of Si decreases during the transformation from the primary ones to eutectic ones, and then increases during the spheroidizing process. The total concentration of Si + Cr in M{sub 6}C carbides remains stable during welding and PWHT. At the same time, the heat leads to the outward diffusion of Mo from the M{sub 6}C carbides, which results in a decrease of the lattice parameter.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Progress in Understanding the Origins of Excellent Corrosion Resistance in Metallic Alloys: From Binary Polycrystalline Alloys to Metallic Glasses and High Entropy Alloys

Some of the factors responsible for good corrosion resistance of select polycrystalline and emerging alloys in chloride solutions are discussed with a goal of providing some perspectives on the current status and future directions. Traditional metallic glass alloys, single phase high entropy alloys (HEAs), early metallic glasses, and high entropy metallic glasses are all emerging corrosion-resistant alloys (CRAs) that utilize traditional strategies for improved corrosion resistance as well as take advantage of some other novel beneficial attributes. These materials enjoy many degrees of freedom as far as choice of both composition and structure, providing great flexibility in the pursuit of superior corrosion resistance. The new materials depart from classical solvent-solute type polycrystalline binary or ternary alloys. Thus, such emerging materials provide significant opportunities to achieve even greater improvements in corrosion resistance in harsh environments. Several examples of the unique corrosion properties of selected materials in the context of modern theories of corrosion are discussed herein. Discussion is restricted to solid-solution binary or ternary polycrystalline alloys, several metallic glass alloys, and single phase HEAs. A common feature of many CRAs is that composition and microstructure often affect both passivity and resistance to localized corrosion that can be divided into initiation, stabilization, and propagation stages. Enormous complexities in protective oxide structures and chemistries and the large number of combinatorial possibilities in newer materials such as HEAs preclude trial-and-error approaches and perhaps even combinatorial experimental design. Computational materials methodologies will be required in the search for new corrosion-resistant alloys in these material classes. The search must consider the best scientific insights available regarding how major and minor alloy additions, as well as various microstructural attributes, contribute to corrosion mitigation. Additional scientific insights, as they emerge, will enable choices beyond the reliance on high concentrations of alloying elements that are known to affect passivity breakdown and pit stabilization. A challenge is to connect the “basic attributes” of an alloy with its properties. The strength of this connection will likely require new scientific principles enabling deep multiphysics insights in order to link feature(s) such as composition and metallurgical phases to the desired corrosion properties. Application of data informatics will likely also play a role given the plethora of variables that are important in corrosion and the difficulty in assessing all relationships. Here, the opportunity exists to accelerate the design of emerging materials for high corrosion resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Elucidating microstructural evolution and hardness variation across friction self-piercing riveted Al-7055 using synchrotron X-ray scattering and advanced microscopy techniques

Friction self-piercing riveting (FSPR) is a unique hybrid joining technique that combines the advantages of mechanical interlocking, frictional heat, and solid-state joining (if metallurgically compatible) to produce crack free joints in high strength and/or low-ductility alloys at room temperature. Here, in the current study, Al-7055 sheets were joined using FSPR for lightweight automotive applications and significant microhardness variations were observed across the joint cross-section. A detailed microstructural characterization at multiple length scales was carried out using advanced electron microscopy and X-ray scattering techniques to provide a fundamental understanding of the process-structure-property relationships. The relative contributions of microstructural characteristics at various length scales (i.e., grain size, dislocation density, solute concentration, precipitate nature) to strengthening were estimated using existent formulations (i.e., Hall-Petch, Taylor, precipitate bypass/shear equations) and correlated to the observed microhardness values across different regions. Small-angle X-ray scattering and scanning transmission electron microscopy revealed significant changes in the size and volume fraction of precipitate species, i.e., GP-I Zones, η′, and Mg/Zn solute co-clusters, depending on the process region. It was observed that the dissolution of the small η′/GP-I zones (T ∼ 150–200 °C) in the heat-affected zone were the key reason for the hardness drop. Further, it was shown that solid-solution, dislocation, grain size and solute co-cluster strengthening played a key role in the thermo-mechanically affected zone and grain-refined zone (GRZ). Finally, these observations were leveraged along with the Zener-Holloman relationship and grain size in the GRZ to estimate the peak joining temperature of the GRZ (∼ 350 °C) near the steel rivet.

aluminum 7xxx alloy↗
DOE OSTI2024

Structural Evolution and Photoluminescence Quenching across the FASnI 3– x Br x ( x = 0–3) Perovskites

One of the primary methods for band gap tuning in metal halide perovskites has been halide (I/Br) mixing. Despite widespread usage of this type of chemical substitution in perovskite photovoltaics, there is still little understanding of the structural impacts of halide alloying, with the assumption being the formation of ideal solid solutions. The FASnI 3–x Br x (x = 0–3) family of compounds provides the first example where the assumption breaks down, as the composition space is broken into two unique regimes (x = 0–2.9; x = 2.9–3) based on their average structure with the former having a 3D and the latter having an extended 3D (pseudo 0D) structure. Pair distribution function (PDF) analyses further suggest a dynamic 5s 2 lone pair expression resulting in increasing levels of off-centering of the central Sn as the Br concentration is increased. These antiferroelectric distortions indicate that even the x = 0–2.9 phase space behaves as a nonideal solid-solution on a more local scale. Solid-state NMR confirms the difference in local structure yielding greater insight into the chemical nature and local distributions of the FA + cation. In contrast to the FAPbI 3–x Br x series, a drastic photoluminescence (PL) quenching is observed with x ≥ 1.9 compounds having no observable PL. In conclusion, our detailed studies attribute this quenching to structural transitions induced by the distortions of the [SnBr 6 ] octahedra in response to stereochemically expressed lone pairs of electrons. This is confirmed through density functional theory, having a direct impact on the electronic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structure and glide of Lomer and Lomer-Cottrell dislocations: Atomistic simulations for model concentrated alloy solid solutions

Lomer (L) and Lomer-Cottrell (LC) dislocations have long been considered to be central to work hardening in face-centered cubic (FCC) metals and alloys. These dislocations act as barriers of motion for other dislocations, and can serve as sites for twin nucleation. Recent focus on multicomponent concentrated FCC solid solution alloys has resulted in many reported observations of LC dislocations. While these and L dislocations are expected to have a role in the mechanical behavior of these alloys, little is understood about how variations in composition and associated fault energies change the response of these dislocations under stress. Here we present atomistic simulations of L and LC dislocations in a model Cu-Ni system and find that changes in composition and applied stress conditions result in a wide variety of responses, including changes in core configuration and (100) glide. The results are compared to and extend previous literature related to the nature of L/LC core structures and how they vary with respect to intrinsic materials properties and stress states. This study also provides insights into mechanisms such as twin nucleation that could have important implications for work hardening in FCC solid-solution alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗