Search NASA⌕ Search

SEARCH · Search NASA

Results for “conjugated polymer donors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

An unprecedented quinoid–donor–acceptor strategy to boost the carrier mobilities of semiconducting polymers for organic field-effect transistors

Quinoidal–aromatic conjugated polymers hold great application potential in organic field-effect transistors (OFETs). However, the development of high mobility quinoidal–aromatic conjugated polymers still lags behind the more popular donor–acceptor (D–A) conjugated polymers, mainly owing to the lack of a rational design strategy and efficient building block. Herein, a novel quinoid–donor–acceptor (Q–D–A) strategy is demonstrated to modulate the energy-level and boost the charge carrier transport mobility of conjugated polymers as opposed to the D–A system. On the basis of this strategy, a quinoidal–aromatic conjugated polymer, namely PAQM-BT, is designed and synthesized. With the combined use of quinoid, donor and acceptor units in the backbone, the resulting Q–D–A polymer PAQM-BT displays the narrowest bandgap with the deepest-lying lowest unoccupied molecular orbital (LUMO) energy level, highest backbone coplanarity, enhanced thin-film crystallinity and smallest effective hole mass ($m^*_h$) in comparison with the corresponding D–A polymer PT3B1 and quinoid–donor (Q–D) polymer PAQM-3T. Benefitting from the more effective intra- and inter-chain charge transport, as corroborated by experiment and theoretical calculations, OFET devices based on PAQM-BT exhibit a highly boosted hole mobility of up to 5.10 cm 2 V -1 s -1 , which is one and four orders of magnitude higher than that of PAQM-3T and PT3B1, respectively, and is among the highest for quinoidal–aromatic conjugated polymers. Finally, the potent Q–D–A strategy not only allows the energy level to be modulated but also leads to effective charge carrier transport, opening up possibilities to the development of high mobility quinoidal–aromatic conjugated polymers based on a variety of quinoids, donors, and acceptors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Vibronic exciton model for low bandgap donor–acceptor polymers

In this study, a vibronic exciton model is introduced to describe the excited state band structure and associated absorption spectra of low bandgap donor–acceptor conjugated polymers. The Hamiltonian is represented in a diabatic basis consisting of Frenkel-like donor and acceptor fragment excitations as well as charge-transfer (CT) excitations between neighboring fragments. States are coupled to each other through electron and hole transfer as well as Coulombically, through interacting fragment transition dipole moments. Local vibronic coupling involving the prominent aromatic-quinoidal vibrational mode, which is responsible for pronounced vibronic progressions in most conjugated oligomers and polymers, is also included. The DAD repeat unit is shown to behave like a J-aggregate trimer, driven by both the sizable in-phase electron and hole transfer integrals between donor and acceptor fragments as well as negative Coulomb coupling between donor and acceptor fragment excitations. The J-aggregate behavior is enhanced in the polymer limit through inter-repeat unit coupling, with the 0–0 vibronic peak significantly enhanced in the lowest-energy near-IR band. In addition, the radiative rate is enhanced by the number of coherently connected repeat units. The near-IR band is shown to possess roughly equal admixtures of CT and Frenkel-like excitations. Applications are made to the polymer PffBT4T-2DT, with the simulated absorption spectrum quantitatively capturing the salient features of the measured spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Energy Transfer Mechanisms in Large Low-Bandgap Polymers from Time-Resolved Experiments and Nonadiabatic Molecular Dynamics Calculations

Conjugated polymers offer unprecedented chemical tunability for modulating energy transfer in a multitude of infrared light applications. In this work, we use a combination of time-resolved spectroscopic experiments and nonadiabatic molecular dynamics calculations to probe the photochemistry and nonradiative transitions in a recently synthesized narrow bandgap donor–acceptor conjugated polymer based on alternating cyclopentadithiophene and electronegative benzothiadiazole heterocycles. Using large-scale semi-empirical nonadiabatic molecular dynamics, which can treat a large 260-atom hexamer, we calculate an S 5 → S 1 lifetime of 34.75 fs, which is consistent with our time-resolved spectroscopic data. Our simulations suggest that vibronic motions of the central carbons in the cyclopentadithiophene functional groups are predominantly involved in the nonradiative transitions, and the excitation becomes more localized on a monomer fragment over time. The combined use of time-resolved experiments and nonadiabatic molecular dynamics calculations in this work provides mechanistic insight into chemical functionalities that can be tuned to enhance energy transfer in other prospective low-bandgap polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Introducing Low-Cost Pyrazine Unit into Terpolymer Enables High-Performance Polymer Solar Cells with Efficiency of 18.23%

Recently, a random ternary copolymerization strategy has become a promising and efficient approach to develop high-performance polymer donors for polymer solar cells (PSCs). Here, in this study, a low-cost electron-withdrawing unit, 2,5-bis(4-(2-ethylhexyl)thiophen-2-yl)pyrazine (PZ-T), is incorporated into the polymer backbone of PM6 as the third component, and three D-A 1 -D-A 2 type terpolymers PMZ-10, PMZ-20, and PMZ-30 are synthesized by the random copolymerization strategy, with the PZ-T proportion of 10%, 20%, and 30%, respectively. The terpolymers exhibit downshifted highest occupied molecular orbital energy levels than PM6, which is beneficial for obtaining higher open-circuit voltage (V oc ) of the PSCs with the polymer as a donor. Importantly, the PSCs based on PMZ-10:Y6 demonstrate efficient exciton dissociation, higher and balanced electron/hole mobilities, desirable aggregation, and high power conversion efficiency of 18.23%, which is the highest efficiency among the terpolymer-based PSCs so far. The results indicate that the ternary copolymerization strategy with PZ-T as the second A-unit is an efficient approach to further improve the photovoltaic performance and reduce the synthetic cost of the D-A copolymer donors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding Solution State Conformation and Aggregate Structure of Conjugated Polymers via Small Angle X-ray Scattering

Donor-acceptor (D-A) conjugated polymers are high-performance organic electronic materials that exhibit complex aggregation behavior. Understanding the solution state conformation and aggregation of conjugated polymers is crucial for controlling morphology during thin-film deposition and the subsequent electronic performance. However, a precise multiscale structure of solution state aggregates is lacking. Here, we present an in-depth small-angle X-ray scattering (SAXS) analysis of the solution state structure of an isoindigo-bithiophene-based D-A polymer (PII-2T) in chlorobenzene and decane as our primary system. Modeling the system as a combination of hierarchical fibrillar aggregates mixed with dispersed polymers, we extract information about conformation and multiscale aggregation and also clarify the physical origin of features often observed but unaddressed or misinterpreted in small-angle scattering patterns of conjugated polymers. The persistence length of the D-A polymer extracted from SAXS agrees well with a theoretical model based on the dihedral potentials. Additionally, we show that the broad high q structure factor peak seen in scattering profiles can be attributed to lamellar stacking occurring within the fibril aggregates and that the low q aggregate scattering is strongly influenced by the polymer molecular weight. Overall, the SAXS profiles of D-A polymers in general exhibit a sensitive dependence on the co-existence of fibrillar aggregate and dispersed polymer chain populations. We corroborate our findings from SAXS with electron microscopy of freeze-dried samples for direct imaging of fibrillar aggregates. Finally, we demonstrate the generality of our approach by fitting the scattering profiles of a variety of D-A polymers based on thieno-isoindigo (PTII-2T), diketopyrrolopyrrole (DPP2T-TT, DPP-BTZ, PDPP2FT-C- 16 ), naphthalenediimide (P(NDI2OD-T2)), and a conjugated block copolymer P3HT-b-DPPT-T. The results presented here establish a picture of the D-A polymer solution state structure and provide a general method of interpreting and analyzing their scattering profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers

Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and Mo(tfd-CO 2 Me) 3 . Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F 4 TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO 2 Me) 3 . Although the F 4 TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO 2 Me) 3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO 2 Me) 3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F 4 TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.

Conjugated polymers↗
DOE OSTI2021

Evolution of Chain Dynamics and Oxidation States with Increasing Chain Length for a Donor–Acceptor-Conjugated Oligomer Series

While it is known that the chain length strongly affects the properties of π-conjugated polymers, the effects of chain length on the molecular structure, chain conformation, and oxidation state properties in donor–acceptor-type conjugated structures remain unclear. This limits our understanding of how the polymer molecular weight impacts material properties. Here, a discrete and monodisperse oligomer series (n = 3, 5, 7, 9, 15, and 21) and polymers (nPB), composed of the donor 3,4-propylenedioxythiophene (ProDOT), the acceptor benzothiadiazole (BTD), and methylthio end-capping groups, are synthesized by C–H-activated cross-coupling. The molecular structure, molecular weight, and dispersity of each oligomer/polymer are thoroughly characterized by nuclear magnetic resonance spectroscopy, mass spectrometry, and gel permeation chromatography. This series reveals a rod-to-coil transition at n = 15 and coil formation at polymer length scales of ~28 units via solution small-angle neutron scattering characterization. The oxidation states are deciphered via cyclic voltammetry, differential pulse voltammetry, spectroelectrochemistry, and density functional theory calculations. Oligomers 3–9 undergo successive one-electron oxidation steps, while 15 and higher undergo multielectron oxidations per step in CH 2 Cl 2 –TBAPF6 at a Pt ultramicroelectrode. The electronic transition of each oxidation state (1+, 2+, 3+, etc.) is tracked by absorption spectroscopy, revealing a “bipolaron to di-polaron” transition at n = 7 at which shorter oligomers prefer bipolaron formation and longer oligomers prefer di-polaron formation in their dication states. Furthermore, oxidized 15 has a lower electronic transition energy compared to its polymer homologue, as shown by spectroelectrochemistry, revealing a synergy between the chain length and the oxidation state properties. This study proves that the convergence limit between small molecule and polymer behavior occurs at approximately 15 units and highlights the property transitions that occur as a function of chain length for a donor–acceptor class of conjugated organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrasensitive Room Temperature Infrared Photodetection Using a Narrow Bandgap Conjugated Polymer

Abstract Photodetectors operating across the short‐, mid‐, and long‐wave infrared (SWIR–LWIR, λ = 1–14 µm) underpin modern science, technology, and society in profound ways. Narrow bandgap semiconductors that form the basis for these devices require complex manufacturing, high costs, cooling, and lack compatibility with silicon electronics, attributes that remain prohibitive for their widespread usage and the development of emerging technologies. Here, a photoconductive detector, fabricated using a solution‐processed narrow bandgap conjugated polymer is demonstrated that enables charge carrier generation in the infrared and ultrasensitive SWIR–LWIR photodetection at room temperature. Devices demonstrate an ultralow electronic noise that enables outstanding performance from a simple, monolithic device enabling a high detectivity ( D *, the figure of merit for detector sensitivity) >2.44 × 10 9 Jones (cm Hz 1/2 W −1 ) using the ultralow flux of a blackbody that mirrors the background emission of objects. These attributes, ease of fabrication, low dark current characteristics, and highly sensitive operation overcome major limitations inherent within modern narrow–bandgap semiconductors, demonstrate practical utility, and suggest that uncooled detectivities superior to many inorganic devices can be achieved at high operating temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

3,4‐Dicyanothiophene—a Versatile Building Block for Efficient Nonfullerene Polymer Solar Cells

Abstract In this contribution, a versatile building block, 3,4‐dicyanothiophene (DCT), which possesses structural simplicity and synthetic accessibility for constructing high‐performance, low‐cost, wide‐bandgap conjugated polymers for use as donors in polymer solar cells (PSCs), is reported. A prototype polymer, PB3TCN‐C66, and its cyano‐free analogue polymer PB3T‐C66, are synthesized to evaluate the potential of using DCT in nonfullerene PSCs. A stronger aggregation property in solution, higher thermal transition temperatures with higher enthalpies, a larger dipole moment, higher relative dielectric constant, and more linear conformation are exhibited by PB3TCN‐C66. Solar cells employing IT‐4F as the electron acceptor offer power conversion efficiencies (PCEs) of 11.2% and 2.3% for PB3TCN‐C66 and PB3T‐C66, respectively. Morphological characterizations reveal that the PB3TCN‐C66:IT‐4F blend exhibits better π–π paracrystallinity, a contracted domain size, and higher phase purity, consistent with its higher molecular interaction parameter, derived from thermodynamic calculations. Moreover, PB3TCN‐C66 offers a higher open‐circuit voltage and reduced energy loss than most state‐of‐the‐art wide‐bandgap polymers, without the need of additional electron‐withdrawing substituents. Two additional polymers derived from DCT also demonstrate promising performance with a higher PCE of 13.4% being achieved. Thus, DCT represents a versatile and promising building block for constructing high‐performance, low‐cost, conjugated polymers for application in PSCs.

Zhang, Bo↗
DOE OSTI2024

Precision Synthesis of Conjugated Polymer Films by Surface-Confined Stepwise Sonogashira Cross-Coupling

Thin films of poly(arylene ethynylene)-conjugated polymers, including low-energy-gap donor–acceptor polymers, can be prepared via stepwise polymerization utilizing surface-confined Sonogashira cross-coupling. This robust and efficient polymerization protocol yields conjugated polymers with a precise molecular structure and with nanometer-level control of the organization and the uniform alignment of the macromolecular chains in the densely packed film. In addition to high stability and predictable and well-defined molecular organization and morphology, the surface-confined conjugated polymer chains experience significant interchain electronic interactions, resulting in dominating intermolecular π-electron delocalization which is primarily responsible for the electronic and spectroscopic properties of polymer films. The fluorescent films demonstrate remarkable performance in chemosensing applications, showing a turn-off fluorescent response on the sub-ppt (part per trillion) level of nitroaromatic explosives in water. This unique sensitivity is likely related to the enhanced exciton mobility in the uniformly aligned and structurally monodisperse polymer films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Lyotropic Liquid Crystal Mediated Assembly of Donor Polymers Enhances Efficiency and Stability of Blade-Coated Organic Solar Cells

Conjugated polymers can undergo complex, concentration-dependent self-assembly during solution processing, yet little is known about its impact on film morphology and device performance of organic solar cells. Herein, lyotropic liquid crystal (LLC) mediated assembly across multiple conjugated polymers is reported, which generally gives rise to improved device performance of blade-coated non-fullerene bulk heterojunction solar cells. Using D18 as a model system, the formation mechanism of LLC is unveiled employing solution X-ray scattering and microscopic imaging tools: D18 first aggregates into semicrystalline nanofibers, then assemble into achiral nematic LLC which goes through symmetry breaking to yield a chiral twist-bent LLC. The assembly pathway is driven by increasing solution concentration – a common driving force during evaporative assembly relevant to scalable manufacturing. This assembly pathway can be largely modulated by coating regimes to give 1) lyotropic liquid crystalline assembly in the evaporation regime and 2) random fiber aggregation pathway in the Landau–Levich regime. The chiral liquid crystalline assembly pathway resulted in films with crystallinity 2.63 times that of films from the random fiber aggregation pathway, significantly enhancing the T80 lifetime by 50-fold. The generality of LLC-mediated assembly and enhanced device performance is further validated using polythiophene and quinoxaline-based donor polymers.

14 SOLAR ENERGY↗
DOE OSTI2022

Donor–Acceptor Conjugated Copolymers Containing Transition-Metal Complex: Intrachain Magnetic Exchange Interactions and Magneto-Optical Activity

A donor-acceptor conjugated copolymer containing thienothiophene (TT) (Donor) units and Co(II) complexes (Acceptor) has been synthesized and characterized. The studies of magnetic properties of the polymers by SQUID and EPR measurements showed antiferromagnetic exchange interaction between neighboring spin centers along with the polymer backbone through intrachain in-teractions. It is the first time that D-A conjugated polymer backbone serving as bridging ligands for magnetic couplings, making this type of polymers promising as magnetic materials. Moreover, the magneto-optical activity (MOA) of polymer LCP1 was char-acterized using magnetic circular dichroism (MCD) spectroscopy. It was found that the material exhibits a large magneto-optic rotation with a peak Verdet constant of 2980 deg*T -1 *m -1 at 590 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Manipulating Conjugated Polymer Backbone Dynamics through Controlled Thermal Cleavage of Alkyl Side Chains

The morphological stability of an organic photovoltaic (OPV) device is greatly affected by the dynamics of donors and acceptors occurring near the device's operational temperature. These dynamics can be quantified by the glass transition temperature (T g ) of conjugated polymers (CPs). Because flexible side chains possess much faster dynamics, the cleavage of the alkyl side chains will reduce chain dynamics, leading to a higher T g . In this work, the T g s for CPs are systematically studied with controlled side chain cleavage. Isothermal annealing of polythiophenes featuring thermally cleavable side chains at 140 °C, is found to remove more than 95% of alkyl side chains in 24 h, and raise the backbone T g from 23 to 75 °C. Coarse grain molecular dynamics simulations are used to understand the T g dependence on side chain cleavage. X-ray scattering indicates that the relative degree of crystallization remains constantduring isothermal annealing process. The effective conjugation length is not influenced by thermal cleavage; however, the density of chromophore is doubled after the complete removal of alkyl side chains. Here, the combined effect of enhancing T g and conserving crystalline structures during the thermal cleavage process can provide a pathway to improving the stability of optoelectronic properties in future OPV devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Impact of Cation Insertion on Semiconducting Polymer Thin Films toward Electrochemical Energy Conversion

Semiconducting polymers are being explored for electrochemical and photoelectrochemical energy transformation and storage applications. For these applications, it is critical to understand how ion insertion from the electrolyte into polymer electrodes modulates the polymer electronic structure and electron doping levels. Here, this study explores electrochemical cation insertion in the n-type conjugated redox polymer P90, composed of alternating naphthalene diimide (NDI) acceptor and bithiophene (T2) donor units, where the NDI units are functionalized with heptaethylene glycol (HEG, 90%) and 2-octyl dodecyl (OD, 10%) side chains. By combining in situ techniques (UV-vis absorption and Raman spectroscopies with electrochemistry), structural analysis using ex situ grazing-incidence wide-angle X-ray scattering (GIWAXS), and density functional theory (DFT) calculations, we reveal that dications enable negative polaron and bipolaron formation in the P90 at less reducing potentials while supporting more bipolaron formation than the monocations; moreover, larger dications with smaller hydrated radii increase the maximum P90 electron doping level. We also determine that the monocations lead to more thermodynamically stabilized polarons compared with the dications. These findings highlight the critical role of cation identity in tuning electrochemical charging, charge stabilization, and electronic structure of n-type conjugated redox polymers, providing guidance on the rational design of polymer-based (photo)electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sulfur Conversion to Donor‐Acceptor Ladder Polymer Networks through Mechanochemical Nucleophilic Aromatic Substitution for Efficient CO 2 Photoreduction

The development of synthetic methods capable of converting elemental sulfur into conjugated porous sulfur‐rich polymers remains a great challenge, although direct utilization of this readily available feedstock can significantly enrich its uses and circumvent environmental problems during sulfur storage. Here, we report herein mechanochemical (MC) nucleophilic aromatic substitution (S N Ar) that enables sulfur conversion into thianthrene‐bridged porous ladder polymer networks with dense donor‐acceptor (D−A) molecular junctions. We demonstrate that the key lies in the generation of bent thianthrene units through a solid‐state ball‐milling condensation reaction between 1,2‐dihaloarenes and elemental sulfur. We also show that the assembling of D−A structural motifs into porous networks affords efficient visible‐light‐driven photocatalytic reduction of carbon dioxide (CO 2 ) with water (H 2 O) vapor, in the absence of any additional photosensitizer, sacrificial agents or cocatalysts. Exceptional photoinduced charge separation along with boosted exciton dissociation results in a high‐performance of carbon monoxide (CO) production rate of 306.1 μmol g −1 h −1 with near 100 % CO selectivity, which is accompanied by H 2 O oxidation to O 2 , as confirmed by both experimental and theoretical results. We anticipate this novel MC S N Ar approach will advance processing techniques for direct sulfur utilization and facilitate new possibilities for the synthesis of D−A ladder polymer networks with promising potential in photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Small molecule dye for molecular imaging and photothermal therapy

Disclosed is a small molecule dye for use in imaging in the near-infrared window, namely between 1000 nm-1700 nm wavelength. The present dyes are also useful for photoacoustic imaging and photothermal therapy. The dyes have a structure of a D-A-D (donor-acceptor-donor) fluorescent compound core and side chains rendering the compounds water soluble and easily conjugated to hydrophilic polymers and/or targeting ligands. Further disclosed is compound, CH1055 that can be PEGylated, conjugated to a targeting ligand, or conjugated to taurine. Key steps utilized to assemble the core structure of the target included a cross-Suzuki coupling reaction, iron reduction and N-thionylaniline induced ring closure. Four carboxylic acid groups were introduced into the donor-acceptor-donor (D-A-D) type fluorescent compound to impart a certain aqueous solubility and to allow facile conjugation to targeting ligands.

Cheng, Zhen↗
DOE OSTI2024

A Three-in-One Hybrid Strategy for High-Performance Semiconducting Polymers Processed from Anisole

The development of semiconducting polymers with good processability in green solvents and competitive electrical performance is essential for realizing sustainable large-scale manufacturing and commercialization of organic electronics. A major obstacle is the processability-performance dichotomy that is dictated by the lack of ideal building blocks with balanced polarity, solubility, electronic structures, and molecular conformation. Herein, through the integration of donor, quinoid and acceptor units, an unprecedented building block, namely TQBT, is introduced for constructing a serial of conjugated polymers. The TQBT, distinct in non-symmetric structure and high dipole moment, imparts enhanced solubility in anisole—a green solvent—to the polymer TQBT-T. Furthermore, PTQBT-T possess a highly rigid and planar backbone owing to the nearly coplanar geometry and quinoidal nature of TQBT, resulting in strong aggregation in solution and localized aggregates in film. Remarkably, PTQBT-T films spuncast from anisole exhibit a hole mobility of 2.30 cm 2 V -1 s -1 , which is record high for green solvent-processable semiconducting polymers via spin-coating, together with commendable operational and storage stability. The hybrid building block emerges as a pioneering electroactive unit, shedding light on future design strategies in high-performance semiconducting polymers compatible with green processing and marking a significant stride towards ecofriendly organic electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

p -Azaquinodimethane: A Versatile Quinoidal Moiety for Functional Materials Discovery

The past 50 years of discovery in organic electronics have been driven in large part by the donor–acceptor design principle, wherein electron-rich and electron-poor units are assembled in conjugation with each other to produce small band gap materials. While the utility of this design strategy is undoubtable, it has been largely exhausted as a frontier of new avenues to produce and tune novel functional materials to meet the needs of the ever-increasing world of organic electronics applications. Its sister strategy of joining quinoidal and aromatic groups in conjugation has, by comparison, received much less attention, to a great extent due to the categorically poor stability of quinoidal conjugated motifs. In 2017 though, the p-azaquinodimethane (AQM) motif was first unveiled, which showed a remarkable level of stability despite being a close structural analogue to p-quinodimethane, a notably reactive compound. In contrast, dialkoxy AQM small molecules and polymers are stable even under harsh conditions and could thus be incorporated into conjugated polymers. When polymerized with aromatic subunits, these AQM-based polymers show notably reduced band gaps that follow reversed structure–property trends to some of their donor–acceptor polymer counterparts and yield organic field-effect transistor (OFET) hole mobilities above 5 cm 2 V –1 s –1 . Additionally, in an ongoing study, these AQM-based compounds are also showing promise as singlet fission (SF) active materials due to their mild diradicaloid character. An expanded world of AQMs was accessed through their ditriflate derivatives, which were first used to produce ionic AQMs (iAQMs) sporting two directly attached cationic groups that significantly affect the AQM motif’s electronics, producing strongly electron-withdrawing quinoidal building blocks. Conjugated polyelectrolytes (CPEs) created with these iAQM building blocks exhibit optical band gaps stretching into the near-infrared I (NIR-I) region and showed exemplary behavior as photothermal therapy agents. In contrast to these stable AQM examples, the synthetic exploration of AQMs also produced examples of more typical diradicaloid reactivity but in forms that were controllable and produced intriguing and high-value products. With certain substitution patterns, AQMs were found to dimerize to form highly substituted [2.2]paracyclophanes in distinctly more appreciable yields than typical cyclophane formation reactions. Certain AQM ditriflates, when crystallized, undergo light-induced topochemical polymerization to form ultrahigh molecular weight (>10 6 Da) polymers that showed excellent performances as dielectric energy storage materials. These same AQM ditriflates could be used to produce the strongly electron-donating redox-active pentacyclic structure: pyrazino[2,3-b:5,6-b']diindolizine (PDIz). Importantly, the PDIz motif allowed for the synthesis of exceedingly small band gap (0.7 eV) polymers with absorbances reaching all the way into the NIR-II region that were also found to produce strong photothermal effects. Both as stable quinoidal building blocks and through their controllable diradicaloid reactivity, AQMs have already proven to be versatile and effective as functional organic electronics materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗