Search NASA⌕ Search

SEARCH · Search NASA

Results for “constrained liquid transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Constraining Hesperian martian PCO2 from mineral analysis at Gale crater

Carbon dioxide is an essential atmospheric component in martian climate models that attempt to reconcile a faint young sun with planet-wide evidence of liquid water at the planets surface in the Noachian and Early Hesperian. Current estimates of ancient martian CO2 levels, derived from global inventories of carbon, and orbital detections of Noachian and Early Hesperian clay mineral-bearing terrains indicate CO2 levels that are unable to support warm and wet conditions. These estimates are subject to various sources of uncertainty however. Mineral and contextual sedimentary environmental data collected by the Mars Science Laboratory rover Curiosity in Gale Crater provide a more direct means of estimating the atmospheric partial pressure of CO2 (PCO2) coinciding with a long-lived lake system in Gale crater at ~3.5 Ga. Results from a reaction-transport model, which simulates mineralogy observed within the Sheepbed member at Yellowknife Bay by coupling mineral equilibria with carbonate precipitation kinetics and rates of sedimentation, indicate atmospheric PCO2 levels in the 10’s mbar range. At such low PCO2 levels, climate models are unable to warm Hesperian Mars anywhere near the freezing point of water and other gases are required to raise atmospheric pressure to prevent lakes from boiling away. Thus, lacustrine features of Gale formed in a cold environment by a mechanism yet to be determined, or the climate models still lack an essential component that would serve to elevate surface temperatures, at least temporally and/or locally, on Hesperian Mars. Our results also impose restrictions on the potential role of atmospheric CO2 in inferred warmer conditions of the Noachian.

Bristow, T. F.↗
DOE OSTI2022

Estimating Drizzle Parameters by Aircraft Sampling

In-cloud supersaturation is calculated from aircraft derived measurements of the in-cloud vertical gradient of liquid water content, vertical velocity, the pt and 3 rd cloud droplet radius moments and a parameter related to the heat and mass transport during condensation and evaporation of cloud droplets. The aircraft data where taken during the VOCALS 2008 study in marine stratocumulus clouds off the coast of Chile. Approximately 16000 discrete samples, 2.5 meter in length, were used in the present analysis of in-cloud supersaturation and its variability, both of which are indicative of turbulent processes within the cloud and their significant impact on drizzle formation. Two additional drizzle parameters, the eddy persistence time and the variance of fluctuations in in-cloud droplet growth rate were also estimated from this data set. These results will help to constrain parameterizations of underlying turbulent microphysical processes of clouds and thereby advance the future development of warm cloud and precipitation models for climate simulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Experimental investigation of elemental and isotopic evaporation processes by laser heating in an aerodynamic levitation furnace

In this report we carried out evaporation experiments on a B-type calcium–aluminium-rich inclusion (CAI) melt in a gas-mixing aerodynamic levitation laser furnace, at 1873 K and an oxygen partial pressure of 10 -9.1 atm, for durations ranging from 60 to 600 s. Evaporation of SiO 2 and MgO follow the same trend as those observed in vacuum furnace experiments at the same temperature and starting composition, showing that their evaporation relative to one another from the melt is independent of pressure, oxygen fugacity, and hydrodynamical regime specific to the furnace. Isotopic ratios of Mg and Si in evaporation residues are used to derive fractionation factors of α 26/24 Mg vap-liq = 0.9906± 0.0004 and α 30/28 Si vap-lip = 0.9943±0.0003, which are both significantly closer to unity than those found for evaporation in a vacuum, which translates to less isotope fractionation. The residues are also less isotopically fractionated than expected for cases in which transport of the gas species away from the melt is diffusion-controlled at 1-atm. By analysing the flow regimes in our furnace, we find that advection by the levitating gas is the primary mode of mass transport away from the melt surface, as opposed to diffusion-limited transport in a vacuum or 1-atm tube furnace. A modified Hertz–Knudsen–Langmuir formulation accounts for this process, and shows that isotopic fractionation of both Si and Mg reflect a saturation factor (ratio of the pressure of the evaporating species to vapour saturation pressure) equal to 0.75. This is in perfect accord with recent measurements of Cu isotopic fractionation using a similar furnace. The fact that three elements (Mg, Si, Cu) with varying equilibrium vapour pressures, activity coefficients in the liquid, and diffusion coefficients in the gas have the same scaling behaviour to saturation pressure is a strong indication that the mechanism controlling evaporation is driven by the hydrodynamical regime imposed in the furnace. Therefore, this class of experiments can be used to constrain processes in which advection dominates over diffusion, such as (but not limited to) planetary ejecta, tektites, giant impacts, nebular condensation in a turbulent flow, or nuclear fallout material. Finally, the possibility to reach high temperatures (in excess of 3500 K) in this furnace allows it to be used to evaluate the activity coefficients of melt components in extreme conditions relevant to molten planetary interiors (i.e., magma oceans), with a specific focus on refractory elements.

58 GEOSCIENCES↗
NASA NTRS1996

High Leverage Space Transportation System Technologies for Human Exploration Missions to the Moon and Beyond

The feasibility of returning humans to the Moon by 2004, the 35th anniversary of the Apollo 11 landing, is examined assuming the use of existing launch vehicles (the Space Shuttle and Titan 4B), a near term, advanced technology space transportation system, and extraterrestrial propellant--specifically 'lunar-derived' liquid oxygen or LUNOX. The lunar transportation system (LTS) elements consist of an expendable, nuclear thermal rocket (NTR)-powered translunar injection (TLI) stage and a combination lunar lander/Earth return vehicle (LERV) using cryogenic liquid oxygen and hydrogen (LOX/LH2) chemical propulsion. The 'wet' LERV, carrying a crew of 2, is configured to fit within the Shuttle orbiter cargo bay and requires only modest assembly in low Earth orbit. After Earth orbit rendezvous and docking of the LERV with the Titan 4B-launched NTR TLI stage, the initial mass in low Earth orbit (IMLEO) is approx. 40 t. To maximize mission performance at minimum mass, the LERV carries no return LOX but uses approx. 7 t of LUNOX to 'reoxidize' itself for a 'direct return' flight to Earth followed by an 'Apollo-style' capsule recovery. Without LUNOX, mission capability is constrained and the total LTS mass approaches the combined Shuttle-Titan 4B IMLEO limit of approx. 45 t even with enhanced NTR and chemical engine performance. Key technologies are discussed, lunar mission scenarios described, and LTS vehicle designs and characteristics are presented. Mission versatility provided by using a small 'all LH2' NTR engine or a 'LOX-augmented' derivative, either individually or in clusters, for outer planet robotic orbiter, small Mars cargo, lunar 'commuter', and human Mars exploration class missions is also briefly discussed.

Borowski, Stanley K.↗
NASA NTRSDate not supplied

Surface Transportation of the Common Habitat from Lander to Habitation Zone

The Common Habitat Architecture is a feasibility study surrounding the use of an SLS core stage liquid oxygen tank as the pressure vessel for a long-duration habitat intended for use in multiple gravity environments. The Common Habitat is used within this study as the primary habitation element in both Moon and Mars surface base camps. The Common Habitat Architecture offloads the Common Habitat from its lander and transports it to a Habitation Zone instead of leaving the habitat integrated with the lander. In this study, the Landing Zone is assumed to be approximately 3.5 kilometers from the Habitation Zone. Given the physical size and estimated 90-ton mass of the Common Habitat, a four-week trade study encompassing Moon and Mars lander identification, offloading, surface transport, and emplacement was conducted in February 2021 to assess whether there are any credible options for landing the Common Habitat on the Moon or Mars and deliver it to its intended point of use. Constrained to use only public data, the study applied subject matter expert opinion to each component of the study. The surface transportation component of the trade study assumes the habitat has been successfully offloaded from its lander and is at a point of handover to the surface transportation system. It is assumed that there are no crew present, and all human operations are performed remotely by Mission Control personnel. Three core cargo handling elements from prior NASA studies were used as the basis from which to derive surface transportation options – the Chariot, the All-Terrain Hex-Limbed Extra-Terrestrial Explorer, and the Lightweight Surface Manipulator System. Variations and hybrid combinations of these elements were used to develop transportation options for the Moon and Mars, given different habitat masses. Ultimately, several potentially feasible solutions were identified, and a solution was recommended that is common to both the Moon and Mars, with the potential to use a dissimilar system as a backup during lunar Common Habitat delivery. Next steps for sizing and additional development and analysis of the recommended surface transportation system are included as forward work.

Surface Mobility↗
DOE OSTI2026

Ion-Specific Effects on PuO 2 Nanoparticle Aggregation and Dissolution in Concentrated Electrolytes

Hydrolytic PuO 2 nanoparticles (NPs) are a dominant aqueous Pu-bearing phase in high ionic strength nuclear wastes, yet their reactivity in nonideal brines remains poorly constrained. We quantify how electrolyte identity and concentration control PuO 2 NP aggregation and ligand-assisted dissolution in acidic, high salinity solutions (NaCl, NaNO 3 , NaClO 4 , Na 2 SO 4 , Na 2 C 2 O 4 up to 5 M). A multitechnique workflow combining liquid scintillation counting (operationally defined aqueous [Pu]), scattering/electrokinetic measurements (aggregate size and zeta potential), and spectroscopy (UV–vis, XPS, Raman) resolves electrolyte-dependent partitioning between colloidal and molecular Pu species. Weakly coordinating anions (ClO 4 – , Cl – , NO 3 – ) largely preserve the (aggregated) nanoparticulate fraction but generate distinct dissolved species at high concentration, i.e., Pu(IV)–nitrato complexes in NaNO 3 and Pu(VI)–chloro complexes in NaCl. In contrast, stronger ligands substantially perturb PuO 2 NP stability: sulfate promotes partial dissolution to Pu(IV)–sulfate complexes at low concentration but reduces aqueous [Pu] at higher sulfate levels via secondary Pu(IV) sulfate formation, whereas oxalate drives strong dissolution to aqueous Pu–oxalate complexes. Aged NPs show similar trends with reduced aqueous fractions and more dominant aggregation mechanisms. In conclusion, these spectroscopically constrained speciation data provide a foundation for incorporating PuO 2 NP reactivity into thermodynamic and reactive transport models for high salinity waste and brine environments.

Aggregation↗
NASA NTRS1990

Advanced launch vehicle upper stages using liquid propulsion and metallized propellants

Metallized propellants are liquid propellants with a metal additive suspended in a gelled fuel or oxidizer. Typically, aluminum particles are the metal additives. These propellants provide increase in the density and/or the specific impulse of the propulsion system. Using metallized propellants for volume- and mass-constrained upper stages can deliver modest increases in performance for Low Earth Orbit to Geosynchronous Earth Orbit and other Earth orbital transfer missions. Metallized propellants, however, can enable very fast planetary missions with a single-stage upper stage system. Trade studies comparing metallized propellant stage performance with non-metallized upper stages and the Inertial Upper Stage are presented. These upper stages are both one- and two-stage vehicles that provide the added energy to send payloads to altitudes and onto trajectories that are unattainable with only the launch vehicle. The stage designs are controlled by the volume and the mass constraints of the Space Transportation System and Space Transportation System-Cargo launch vehicles. The influences of the density and specific impulse increases enabled by metallized propellants are examined for a variety of different stage and propellant combinations.

Palaszewski, B. A.↗
NASA NTRS1992

Upper stages using liquid propulsion and metallized propellants

Metallized propellants are liquid propellants with a metal additive suspended in a gelled fuel. Typically, aluminum particles are the metal additive. These propellants increase the density and/or the specific impulse of the propulsion system. Using metallized propellants for volume- and mass-constrained upper stages can deliver modest increases in performance for low Earth orbit to geosynchronous Earth orbit (LEO-GEO) and other Earth-orbital transfer missions. However, using metallized propellants for planetary missions can deliver great reductions in flight time with a single-stage, upper-stage system. Tradeoff studies comparing metallized propellant stage performance with nonmetallized upper stages and the Inertial Upper Stage (IUS) are presented. These upper stages, launched from the STS and STS-C, are both one- and two-stage vehicles that provide the added energy to send payloads to high altitude orbits and onto interplanetary trajectories that are unattainable with only the Space Transportation System (STS) and the Space Transportation System-Cargo (STS-C). The stage designs are controlled by the volume and the mass constraints of the STS and STS-C launch vehicles. The influences of the density and specific impulse increases enabled by metallized propellants are examined for a variety of different stage and propellant combinations.

Palaszewski, Bryan A.↗
NASA NTRS1990

Advanced Launch Vehicle Upper Stages Using Liquid Propulsion and Metallized Propellants

Metallized propellants are liquid propellants with a metal additive suspended in a gelled fuel or oxidizer. Typically, aluminum (Al) particles are the metal additive. These propellants provide increase in the density and/or the specific impulse of the propulsion system. Using metallized propellant for volume-and mass-constrained upper stages can deliver modest increases in performance for low earth orbit to geosynchronous earth orbit (LEO-GEO) and other earth orbital transfer missions. Metallized propellants, however, can enable very fast planetary missions with a single-stage upper stage system. Trade studies comparing metallized propellant stage performance with non-metallized upper stages and the Inertial Upper Stage (IUS) are presented. These upper stages are both one- and two-stage vehicles that provide the added energy to send payloads to altitudes and onto trajectories that are unattainable with only the launch vehicle. The stage designs are controlled by the volume and the mass constraints of the Space Transportation System (STS) and Space Transportation System-Cargo (STS-C) launch vehicles. The influences of the density and specific impulse increases enabled by metallized propellants are examined for a variety of different stage and propellant combinations.

Palaszewski, Bryan A.↗
NASA NTRS1999

Potential Climate Impacts of Engine Particle Emissions

Solid (soot) and liquid (presumed sulfate) particle emissions from aircraft engines may have serious impacts on the atmosphere. While the direct radiative impact of these particles is expected to be small relative to those from natural sources (Atmospheric Effects of Subsonic Aircraft: Interim Assessment of the Advanced Subsonic Technology Program, NASA Ref. Pub. 1400, 1997), their indirect effects on atmospheric chemistry and cloud formation may have a significant impact. The potential impacts of primary concern are the increase of sulfate surface area and accelerated heterogeneous chemical reactions, and the potential for either modified soot or sulfate particles to serve as cloud nuclei which would change the frequency or radiative characteristics of clouds. Volatile (sulfate) particle concentrations measured behind the Concorde aircraft in flight in the stratosphere were much higher than expected from near-field model calculations of particle formation and growth. Global model calculations constrained by these data calculate a greater level of stratospheric ozone depletion from the proposed High speed Civil Transport (HSCT) fleet than those without particle emission. Soot particles have also been proposed as important in heterogeneous chemistry but this remains to be substantiated. Aircraft volatile particle production in the troposphere has been shown by measurements to depend strongly on fuel sulfur content. Sulfate particles of sufficient size are known to provide a good nucleating surface for cloud growth. Although pure carbon soot is hydrophobic, the solid particle surface may incorporate more suitable nucleating sites. The non-volatile (soot) particles also tend to occupy the large end of aircraft particle size spectra. Quantitative connection between aircraft particle emissions and cloud modification has not been established yet, however, even small changes in cloud amount or properties could have a significant effect on the radiative balance of the atmosphere.

Kawa, S. Randy↗
NASA NTRS1985

The seasonal cycle of water on Mars

A review of the behavior of water in the Mars atmosphere and subsurface is appropriate now that data from the Mariner and Viking spacecraft have been analyzed and discussed for several years following completion of those missions. Observations and analyses pertinent to the seasonal cycle of water vapor in the atmosphere of Mars are reviewed, with attention toward transport of water and the seasonal exchange of water between the atmosphere and various non-atmospheric reservoirs. Possible seasonally-accessible sources and sinks for water include water ice on or within the seasonal and residual polar caps; surface or subsurface ice in the high-latitude regions of the planet; adsorbed or chemically-bound water within the near-surface regolith; or surface or subsurface liquid water. The stability of water within each of these reservoirs is discussed, as are the mechanisms for driving exchange of the water with the atmosphere and the timescales for exchange. Specific conclusions are reached about the distribution of water and the viability of each mechanism as a seasonal reservoir. Discussion is also included of the behavior of water on longer timescales, driven by the variations in solar forcing due to the quasi-periodic variations of the orbital obliquity. Finally, specific suggestions are made for future observations from spacecraft which would further define or constrain the seasonal cycle of water.

Jakosky, B. M.↗
NASA NTRS2001

Chemical Engineering in Space

The state of the art in launch systems uses chemical propulsion systems, primarily liquid hydrogen and liquid oxygen, to provide the energy necessary to achieve orbit and escape the bonds of Earth's gravity. In the future there may be other means available; however, currently few of these alternatives can compare to the speed or the ease of use provided by cryogenic chemical propulsion agents. Cryogenics, the science and art of producing cold operating conditions, has become increasingly important to our ability to travel within our solar system. The production and transport of cryogenic fuels as well as the long-term storage of these fluids are necessary for mankind to travel within our solar system. It is with great care and at a significant cost that gaseous compounds such as hydrogen and oxygen are liquified and become dense enough to use for rocket fuel. As our explorations move farther away from Earth, we need to address how to produce the necessary fuels to make a complete round-trip. The cost and the size of any expedition to another celestial body are extreme. If we are constrained by the need to take everything necessary (fuel, life support, etc.) for our survival and return, we greatly increase the risk of being able to go. As with the early explorers on Earth, we will need to harvest much of our energy and our life support from the celestial bodies. The in situ production of these energy sources is paramount to success. Due to the current propulsion system designs, the in-situ processes will require liquefaction and the application of cryogenics. The challenge we face for the near future is to increase our understanding of cryogenic long-term storage and off-world production of cryogenic fluids. We must do this all within the boundaries of very restricted size, weight, and robustness parameters so that we may launch these apparatus from Earth and utilize them elsewhere. Miniaturization, efficiency, and physically robust systems will all play a part in making space exploration possible; however, it is cryogenics that will enable all of this to occur.

Lobmeyer, Dennis A.↗
NASA NTRS2015

Sulfur and Metal Fertilization of the Lower Continental Crust

Mantle-derived melts and metasomatic fluids are considered to be important in the transport and distribution of trace elements in the subcontinental lithospheric mantle. However, the mechanisms that facilitate sulfur and metal transfer from the upper mantle into the lower continental crust are poorly constrained. This study addresses this knowledge gap by examining a series of sulfide- and hydrous mineral-rich alkaline mafic-ultramafic pipes that intruded the lower continental crust of the Ivrea-Verbano Zone in the Italian Western Alps. The pipes are relatively small (<300 m diameter) and primarily composed of a matrix of subhedral to anhedral amphibole (pargasite), phlogopite and orthopyroxene that enclose sub-centimeter-sized grains of olivine. The 1 to 5 m wide rim portions of the pipes locally contain significant blebby and disseminated Fe-Ni-Cu-PGE sulfide mineralization.Stratigraphic relationships, mineral chemistry, geochemical modeling and phase equilibria suggest that the pipes represent open-ended conduits within a large magmatic plumbing system. The earliest formed pipe rocks were olivine-rich cumulates that reacted with hydrous melts to produce orthopyroxene, amphibole and phlogopite.Sulfides precipitated as immiscible liquid droplets that were retained within a matrix of silicate crystals and scavenged metals from the percolating hydrous melt. New high-precision chemical abrasion TIMS-UPb dating of zircons from one of the pipes indicates that these pipes were emplaced at 249.1+/-0.2 Ma, following partial melting of lithospheric mantle pods that were metasomatized during the Eo-Variscan oceanic to continental subduction (approx. 420-310 Ma). The thermal energy required to generate partial melting of the metasomatized mantle was most likely derived from crustal extension, lithospheric decompression and subsequent asthenospheric rise during the orogenic collapse of the Variscan belt (<300 Ma). Unlike previous models, outcomes from this study suggest a significant temporal gap between the occurrence of mantle metasomatism, subsequent partial melting and emplacement of the pipes.We argue that this multi-stage process is a very effective mechanism to fertilize the commonly dry and refractory lower continental crust in metals and volatiles. During the four-dimensional evolution of the thermo-tectonic architecture of any given terrain, metals and volatiles stored in the lower continental crust may become available as sources for subsequent ore-forming processes, thus enhancing the prospectivity of continental block margins for a wide range of mineral systems.

Marek Locmelis↗
NASA NTRS1999

Constrained Vapor Bubble

The nonisothermal Constrained Vapor Bubble, CVB, is being studied to enhance the understanding of passive systems controlled by interfacial phenomena. The study is multifaceted: 1) it is a basic scientific study in interfacial phenomena, fluid physics and thermodynamics; 2) it is a basic study in thermal transport; and 3) it is a study of a heat exchanger. The research is synergistic in that CVB research requires a microgravity environment and the space program needs thermal control systems like the CVB. Ground based studies are being done as a precursor to flight experiment. The results demonstrate that experimental techniques for the direct measurement of the fundamental operating parameters (temperature, pressure, and interfacial curvature fields) have been developed. Fluid flow and change-of-phase heat transfer are a function of the temperature field and the vapor bubble shape, which can be measured using an Image Analyzing Interferometer. The CVB for a microgravity environment, has various thin film regions that are of both basic and applied interest. Generically, a CVB is formed by underfilling an evacuated enclosure with a liquid. Classification depends on shape and Bond number. The specific CVB discussed herein was formed in a fused silica cell with inside dimensions of 3x3x40 mm and, therefore, can be viewed as a large version of a micro heat pipe. Since the dimensions are relatively large for a passive system, most of the liquid flow occurs under a small capillary pressure difference. Therefore, we can classify the discussed system as a low capillary pressure system. The studies discussed herein were done in a 1-g environment (Bond Number = 3.6) to obtain experience to design a microgravity experiment for a future NASA flight where low capillary pressure systems should prove more useful. The flight experiment is tentatively scheduled for the year 2000. The SCR was passed on September 16, 1997. The RDR is tentatively scheduled for October, 1998.

Huang, J.↗
NASA NTRS2017

Mineralogy of Rock Flour in Glaciated Volcanic Terrains: An Analog for a Cold and Icy Early Mars

Geomorphological and mineralogical data from early Martian surfaces indicate liquid water was present on ancient Mars. The relative surface temperatures, however, remain a subject of debate. Was early Mars warm and wet or cold and icy with punctuated periods of warmth and ice melt? By characterizing the mineralogy and geochemistry of modern icy mafic terrains on Earth, we can search for these characteristics in early Martian terrains to better constrain the early Martian climate. Here, we describe the mineralogy of glacial flour in a modern glaciated volcanic terrain in Oregon, USA. We are particularly interested in secondary phases that form in these environments, and we hypothesize that poorly crystalline phases may preferentially form in these terrains because of the low temperatures and the seasonality of melt water production. A description of the mineralogy of the moraines, the composition of the amorphous materials, and the geochemistry of the glacial melt waters are presented elsewhere. Glacial flour is made up of silt- and clay-sized particles that form from the physical weathering of rock underlying a wet-based glacier as the glacier slides over it. Flour is usually transported from underneath a glacier by melt water streams. The geochemistry of glacial melt water streams has been studied extensively and has been used to infer weathering reactions within glacial systems. However, the mineralogy of these environments, especially on mafic volcanic terrains, is not well studied. Rock flour is a ubiquitous physical weathering product in glaciated terrains and, therefore, affects microbial habitats, stream and lake chemistry, and chemical weathering processes. and by studying the mineralogy of glacial flour, we can better understand geochemical and microbiological processes in subglacial and proglacial terrains.

Rampe, E. B.↗
DOE OSTI2026

Final report: Insights from ARM observations into aerosol processing and transport by extratropical cyclones and aerosol effects on cyclone clouds

This project advanced understanding of aerosol–cloud interactions in extratropical cyclones using observations from the Atmospheric Radiation Measurement (ARM) Eastern North Atlantic (ENA) observatory and ACE-ENA field campaigns, along with satellite datasets and numerical modeling. We have quantified the susceptibility of frontal clouds to aerosols, showing that this susceptibility is similar to that in non-frontal clouds despite substantial (factor 2) differences in droplet concentrations between these cloud types, and also significant differences in cloud albedo. A key finding was that Aitken-mode (here, 60-100nm diameter) aerosols play a disproportionately important role in droplet activation in frontal clouds, and concentrations of these particles are frequently strongly biased in climate models. Activation of aerosols depends strongly on updraft speeds, and via collaboration with Argonne National Laboratory we contributed to quantifying these better with the ARM radar wind profiler at the ENA site. Our studies in the North Atlantic have analogs in the Southern Ocean, and to draw these out we examined data from the MARCUS and SOCRATES field campaigns. We identified new particle formation within extratropical cyclones as a potentially important source of cloud condensation nuclei in these pristine marine environments. By combining ARM observations with perturbed parameter ensemble simulations, we demonstrated that surface observations can effectively constrain aerosol–cloud adjustments and reduce uncertainty in simulated cloud liquid water path responses by approximately 15%, yielding stronger constraints on historical aerosol cooling effects. The work further established precipitation processes as a dominant control on aerosol–cloud interactions and Earth system predictability.

Gordon, Hamish [Department of Chemical Engineering↗
DOE OSTI2022

A Novel Catalytic Membrane Reactor for DME Synthesis from Renewable Resources

Production of liquid fuels or chemicals from CO 2 (captured from the air or flue gases) and renewable hydrogen presents a new approach to producing clean fuels domestically. While significant progress has been made in the area of renewable electricity generation from solar and wind, a large gap remains with respect to the production of renewable liquid fuels/chemicals. Other processes for producing liquid fuels/chemicals from renewable electricity are constrained by thermodynamic limitations, making them prohibitively expensive and impractical. The team is overcoming these limitations and developing catalytic membrane reactor processes with high yields and low energy penalties. Supported by the Advanced Research Projects Agency-Energy (ARPA-E) of the US Department of Energy (DOE), GTI Energy and partners have been developing a technology for the production of renewable dimethyl ether (DME) from carbon dioxide (CO 2 ) and renewable hydrogen (H 2 ) using a novel catalytic membrane reactor and demonstration of this system at a scale of 1 kg/day. DME is a clean-burning, non-toxic fuel with a high cetane value (55-60), making it an excellent diesel alternative. DME can be stored as a liquid under moderate pressure, eliminating the need for the high-pressure containers used for CNG or cryogenics, as in the case of LNG. DME is also approved as a renewable fuel under the U.S. Environmental Protection Agency’s Renewable Fuels Standard (RFS), making it eligible for Renewable Identification Numbers (RINs) credits. By producing DME through the catalytic conversion of captured CO 2 and renewable H 2 , this process will produce renewable liquid transportation fuel and a means of large-scale utilization of captured CO 2 . In the DME synthesis process, CO 2 and H 2 are fed to a hollow fiber catalytic membrane reactor at 300-600 psig that contains a bi-functional catalyst that combines two reactions, methanol synthesis (CO 2 + 3H 2 → CH 3 OH + H 2 O) and methanol dehydration (2CH 3 OH → CH 3 OCH 3 + H 2 O), into a one-step process to produce DME. The bifunctional catalyst converts methanol to DME, enabling higher overall CO 2 conversion. A Cu/ZnO/ZrO 2 /Al 2 O 3 (CZZA) catalyst is used for methanol synthesis and is coupled with a zeolite catalyst H-ZSM-5 for dehydration. This one-step process intensifies a process that would otherwise require multiple reaction steps. However, combining these two reactions results in increased water production which inhibits catalytic activity. Here, the Na + -gated, water-transport membrane (Science, vol. 367, pp. 667, 2020), removes water in situ, shifting the thermodynamic equilibrium towards product formation while decreasing kinetic inhibition from water adsorption onto the catalyst surface. The Na + gated, water-transport nanochannel membrane showed H 2 O/CO 2 selectivity of 560 at 250 °C and 300 psig for H 2 O/CO 2 /CO/H 2 /MeOH gas mixtures. The selectivities of H 2 O/H 2 , H 2 O/CO, and H 2 O/MeOH were 190, 170, and 80, respectively. In a laboratory-scale membrane reactor, DME synthesis testing using this membrane, a DME production rate of 440 g DME /kg cat /h was achieved at 260 °C and 550 psig. Compared to the packed bed reactor, the CO 2 conversion and DME production rate in the membrane reactor were 80% and three times higher, respectively. A prototype test system (1 kg/day) was designed, constructed, and tested. A DME production rate of 1.31 kg/day and a DME productivity of 360 g/h/kg were achieved in the prototype membrane reactor. Good stability was demonstrated during 150-h continuous operation and multiple startups/shutdowns tests.

10 SYNTHETIC FUELS↗
NASA NTRS2016

Development of Liquid Propulsion Systems Testbed at MSFC

As NASA, the Department of Defense and the aerospace industry in general strive to develop capabilities to explore near-Earth, Cis-lunar and deep space, the need to create more cost effective techniques of propulsion system design, manufacturing and test is imperative in the current budget constrained environment. The physics of space exploration have not changed, but the manner in which systems are developed and certified needs to change if there is going to be any hope of designing and building the high performance liquid propulsion systems necessary to deliver crew and cargo to the further reaches of space. To further the objective of developing these systems, the Marshall Space Flight Center is currently in the process of formulating a Liquid Propulsion Systems testbed, which will enable rapid integration of components to be tested and assessed for performance in integrated systems. The manifestation of this testbed is a breadboard engine configuration (BBE) with facility support for consumables and/or other components as needed. The goal of the facility is to test NASA developed elements, but can be used to test articles developed by other government agencies, industry or academia. Joint government/private partnership is likely the approach that will be required to enable efficient propulsion system development. MSFC has recently tested its own additively manufactured liquid hydrogen pump, injector, and valves in a BBE hot firing. It is rapidly building toward testing the pump and a new CH4 injector in the BBE configuration to demonstrate a 22,000 lbf, pump-fed LO2/LCH4 engine for the Mars lander or in-space transportation. The value of having this BBE testbed is that as components are developed they may be easily integrated in the testbed and tested. MSFC is striving to enhance its liquid propulsion system development capability. Rapid design, analysis, build and test will be critical to fielding the next high thrust rocket engine. With the maturity of the BBE testbed, MSFC propulsion engineering will bring forward a national capability that enables growth of both commercial and government interests.

Alexander, Reginald↗