Search NASA⌕ Search

SEARCH · Search NASA

Results for “control electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

LaAlO{sub 3} thickness window for electronically controlled magnetism at LaAlO{sub 3}/SrTiO{sub 3} heterointerfaces

Complex-oxide heterostructures exhibit rich physical behavior such as emergent conductivity, superconductivity, and magnetism that are intriguing for scientific reasons as well as for potential technological applications. It was recently discovered that in-plane magnetism at the LaAlO{sub 3}/SrTiO{sub 3} (LAO/STO) interface can be electronically controlled at room temperature. Here, we employ magnetic force microscopy to investigate electronically controlled ferromagnetism at the LAO/STO interface with LAO thickness t varied from 4 unit cell (u.c.) to 40 u.c. Magnetic signatures are observed only within a thickness window 8 u.c. ≤ t ≤ 25 u.c. Within this window, the device capacitance corresponds well to the expected geometric value, while for thicknesses outside this window, the capacitance is strongly suppressed. The ability to modulate electronic and magnetic properties of LAO/STO devices depends on the ability to control carrier density, which is in turn constrained by intrinsic tunneling mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronically controlled mechanical seal for aerospace applications--Part 2: Transient tests

An electronically controlled mechanical seal for use as the purge gas seal in a liquid oxygen turbopump has been fabricated and tested under transient operating conditions. The thickness of the lubricating film is controlled by adjusting the coning of the carbon face. This is accomplished by applying a voltage to a piezoelectric actuator to which the carbon face is bonded. The seal has been operated with a closed-loop control system that utilizes either the leakage rate or seal face temperature as the feedback. Both speed and pressure transients have been imposed on the seal. The transient tests have demonstrated that the seal is capable of maintaing low leakage rates while limiting face temperatures.

Wolff, Paul J.↗

Performance improvements of a highly integrated digital electronic control system for an F-15 airplane

The NASA highly integrated digital electronic control (HIDEC) program is structured to conduct flight research into the benefits of integrating an aircraft flight control system with the engine control system. A brief description of the HIDEC system installed on an F-15 aircraft is provided. The adaptive engine control system (ADECS) mode is described in detail, together with simulation results and analyses that show the significant excess thrust improvements achievable with the ADECS mode. It was found that this increased thrust capability is accompanied by reduced fan stall margin and can be realized during flight conditions where engine face distortion is low. The results of analyses and simulations also show that engine thrust response is improved and that fuel consumption can be reduced. Although the performance benefits that accrue because of airframe and engine control integration are being demonstrated on an F-15 aircraft, the principles are applicable to advanced aircraft such as the advanced tactical fighter and advanced tactical aircraft.

Putnam, T. W.↗

Scaffolds of magnetically active 3d metals in the valence electron controlled borides Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr–Ni; x=0.5–1): Structutral, electronic and magnetic properties

Polycrystalline samples of the boride series Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr, Co, Mn, Ni) including single crystals of Ti{sub 8}Co{sub 3}Ru{sub 18}B{sub 8} have been prepared by arc-melting the elements. The phases were characterized by powder X-ray diffraction (Rietveld refinement), single-crystal X-ray diffraction (for M=Co), and energy-dispersive X-ray (EDX) analysis. They are substitutional variants of the Zn{sub 11}Rh{sub 18}B{sub 8} structure type, space group P4/mbm (No. 127) and contain a “scaffold” structural unit (M-ladders interacting with M/Ti-chains) as well as isolated M/Ti-chains. According to DFT calculations, the Ru–X (X=B, Ti, Ti/M) bonding interactions are nearly constant throughout the series and responsible for the structural stability of these phases, whereas the M–M and Ru–M interactions vary significantly with varying valence electron count. Furthermore, density of states (DOS) analyses predict the phases with M=Mn and Ni to develop a total magnetic moment but not the M=Co phase. Susceptibility measurements confirm the Co phase to be paramagnetic and the Mn Phase orders ferrimagnetically below 120 K and thus develops a magnetic moment, as predicted. - Graphical abstract: The crystal structures of the new phases (M=Cr, Mn, Co, Ni) are confirmed by Rietveld refinement of powder diffraction data and single crystal X-ray diffraction (for M=Co) to contain beside the M-ladder also M/Ti-chains. Similar to the series Ti{sub 9}M{sub 2}Ru{sub 18}B{sub 8}, the crystal structure of the new phases are mainly stabilized by the heteroatomic Ru–B and Ru–Ti bonds that remain nearly constant throughout the series, whereas the M-containing bonds vary significantly with varying valence electron count. An experimental finding confirmed and even extended by COHP bonding analyses. In addition, the DOS analyses of the M-elements reveal the development of magnetic moments for the M=Mn, Ni cases but not for M=Co. Indeed, Ti{sub 8}Co{sub 3}Ru{sub 18}B{sub 8} was found experimentally to be a paramagnet and ferrimagnetic ordering below 120 K is found for M=Mn. Highlights: • Synthesis of the valence electron controlled borides Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr–Ni). • Prediction of magnetic properties of Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8}. • Ferrimagnetic ordering found in Ti{sub 8}M{sub 3}Ru{sub 18}B{sub 8}. • Chemical bonding studied by density functional theory.

36 MATERIALS SCIENCE↗

Electronically Controlled Mechanical Seal for Aerospace Applications -- Part 1: Design, Analysis, and Steady State Tests

An electronically-controlled mechanial seal, for use as the purge gas seal in a liquid oxygen turbopump, has been designed, analyzed, and built. The thickness of the lubricating film between the faces is controlled by adjusting the coning of the carbon face. This is done by applying a voltage across a piezoelectric element to which the carbon face is bound. Steady state tests have shown that the leakage rate (and film thickness) can be adjusted over a substantial range, utilizing the available range of voltage.

Salant, Richard F.↗

Development of flexible wings and flapping mechanism with integrated electronic control system, for micro air vehicle research

This paper presents the development of flexible wings, flapping mechanism, and integrated electronic control system (ECS) to emulate the bat wing flapping for the ongoing micro air vehicle (MAV) research. Three bat species having dimensions close to the design requirement of MAV, namely, Mormopterus Planiceps, Nytophilus Geoffroyi, and Scotorepens Balstoni were selected, and the average of their physical dimensions was chosen. The commercially available titanium alloy, Ti ± 6Al ± 4V, was used for the wing frame, and the membrane was made of latex. A four-bar slider-crank mechanism was designed and fabricated to facilitate the wing flapping; ECS controlled the flapping frequency in the real-time mode. The system was tested in open air wind tunnel at frequency6 Hz, angle of attack (AOA) 0–50°, and velocity range 2–7 m s{sup −1}. The experimental flapping angle which is compared with the theoretical flapping angle was obtained from the analytical kinematic model. The mean lift and drag coefficients were also measured and the results were found to be excellent. Compared to the manual control and measurement of flapping frequency, the proposed ECS demonstrates efficient control and accurate measurement. Moreover, the tedious procedure involved in the repeated calibrations for the manual system is totally eliminated by ECS.

42 ENGINEERING↗

Flight control electronics reliability/maintenance study

Collection and analysis of data are reported that concern the reliability and maintenance experience of flight control system electronics currently in use on passenger carrying jet aircraft. Two airlines B-747 airplane fleets were analyzed to assess the component reliability, system functional reliability, and achieved availability of the CAT II configuration flight control system. Also assessed were the costs generated by this system in the categories of spare equipment, schedule irregularity, and line and shop maintenance. The results indicate that although there is a marked difference in the geographic location and route pattern between the airlines studied, there is a close similarity in the reliability and the maintenance costs associated with the flight control electronics.

Dade, W. W.↗

The plasma transistor: A microcavity plasma device coupled with a low voltage, controllable electron emitter

A microplasma transistor has been realized by injecting electrons into the sheath of a rare gas plasma with a low voltage (|V{sub b}|<25 V), controllable electron emitter. Integrating a solid state emitter with a 500 {mu}m diam. cylindrical microcavity plasma yields a three terminal current-controlled device capable of modulating the conduction current and light intensity generated by the microplasma. For an emitter voltage of V{sub b}=-10 V, the rms charge carried by the conduction current of a Ne microplasma is tripled relative to the value measured for no current injection. Similarly, the wavelength-integrated visible emission is increased by 2.7 and 4 dB for V{sub b}=-5 and -25 V, respectively. From the continuity equation for charged particle flux in the sheath, the electron density at the edge of the sheath is determined to be n{sub s}=(3{+-}1)x10{sup 12} cm{sup -3} for an electron temperature in the 1-5 eV range. Energizing the electron emitter is estimated to reduce the ratio of the ion to electron number densities at the cathode surface from 25 to 14. A parameter {beta}{sub p}, defined as the microplasma transistor conductance normalized to that for the conventional plasma device (i.e., V{sub b}=0), is introduced and found to be {approx}40 for this unoptimized device when |V{sub b}|=5 V.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electronic control of redox reactions inside Escherichia coli using a genetic module

Microorganisms regulate the redox state of different biomolecules to precisely control biological processes. These processes can be modulated by electrochemically coupling intracellular biomolecules to an external electrode, but current approaches afford only limited control and specificity. Here we describe specific electrochemical control of the reduction of intracellular biomolecules in Escherichia coli through introduction of a heterologous electron transfer pathway. E . coli expressing cymAmtrCAB from Shewanella oneidensis MR-1 consumed electrons directly from a cathode when fumarate or nitrate, both intracellular electron acceptors, were present. The fumarate-triggered current consumption occurred only when fumarate reductase was present, indicating all the electrons passed through this enzyme. Moreover, CymAMtrCAB-expressing E . coli used current to stoichiometrically reduce nitrate. Thus, our work introduces a modular genetic tool to reduce a specific intracellular redox molecule with an electrode, opening the possibility of electronically controlling biological processes such as biosynthesis and growth in any microorganism.

59 BASIC BIOLOGICAL SCIENCES↗

Preliminary Performance Data on General Electric Integrated Electronic Control Operating on J47 RX1-3 Turbojet Engine in NACA Altitude Wind Tunnel

Performance data obtained with recording oscillographs are presented to show the transient response of the General Electric Integrated Electronic Control operating on the J47 RXl-3 turbo-Jet engine over a range of altitudes from 10,000 to 45,000 feet and at ram pressure ratios of 1.03 and 1.4. These data represent the performance of the final control configuration developed after an investigation of the engine transient behavior in the NACA altitude wind tunnel. Oscillograph traces of controlled accelerations (throttle bursts),oontrolled decelerations (throttle chops), and controlled altitude starts are presented.

Darnold Blivas↗

Electronic control circuits: A compilation

A compilation of technical R and D information on circuits and modular subassemblies is presented as a part of a technology utilization program. Fundamental design principles and applications are given. Electronic control circuits discussed include: anti-noise circuit; ground protection device for bioinstrumentation; temperature compensation for operational amplifiers; hybrid gatling capacitor; automatic signal range control; integrated clock-switching control; and precision voltage tolerance detector.

Source record↗

Improved Electronic Control for Electrostatic Precipitators

Electrostatic precipitators remove particulate matter from smoke created by burning refuse. Smoke exposed to electrostatic field, and particles become electrically charged and migrate to electrically charged collecting surfaces. New microprocessor-based electronic control maintains precipitator power at maximum particulate-collection level. Control automatically senses changes in smoke composition due to variations in fuel or combustion and adjusts precipitator voltage and current accordingly. Also, sensitive yet stable fault detection provided.

Johnston, D. F.↗

Control Electronics for Solar/Flywheel Power Supply

Control circuit automatically directs flow of electrical energy to and from motor with flywheel that constitutes storage element of solar-power system. When insolation is sufficient for charging, power is supplied by solar-cell array to load and motor. During periods of darkness, motor made to act as generator, drawing kinetic energy from flywheel and supplying it to load.

Nola, F. J.↗

Performance seeking control (PSC) for the F-15 highly integrated digital electronic control (HIDEC) aircraft

The performance seeking control algorithm optimizes total propulsion system performance. This adaptive, model-based optimization algorithm has been successfully flight demonstrated on two engines with differing levels of degradation. Models of the engine, nozzle, and inlet produce reliable, accurate estimates of engine performance. But, because of an observability problem, component levels of degradation cannot be accurately determined. Depending on engine-specific operating characteristics PSC achieves various levels performance improvement. For example, engines with more deterioration typically operate at higher turbine temperatures than less deteriorated engines. Thus when the PSC maximum thrust mode is applied, for example, there will be less temperature margin available to be traded for increasing thrust.

Orme, John S.↗