Search NASA⌕ Search

SEARCH · Search NASA

Results for “core model proposal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

H-alpha Proxies for EIT Crinkles: Further Evidence for Pre-Flare "Breakout"-Type Activity in an Ejective Solar Eruption

We present Halpha observations from Big Bear Solar Observatory of an eruptive flare in NOAA AR 8210, occurring near 22:30 UT on 1998 May 1. Previously, using the EUV Imaging Telescope (EIT) on the SOHO spacecraft, we found that a pattern of transient, localized brightenings, which we call "EIT crinkles," appears in the neighborhood of the eruption near the time of flare onset. These EIT crinkles occur at a location in the active region well separated from the sheared core magnetic fields, which is where the most intense features of the eruption are concentrated. We also previously found that high-cadence images from the Soft X-ray Telescope (SXT) on Yohkoh indicate that soft X-ray intensity enhancements in the core begin after the start of the EIT crinkles. With the Halpha data, we find remote flare brightening counterparts to the EIT crinkles. Lightcurves as functions of time of various areas of the active region show that several of the remote flare brightenings undergo intensity increases prior to onset of principle brightenings in the core region, consistent with our earlier findings from EIT and SXT data. These timing relationships are consistent with the eruption onset mechanism known as the breakout model, introduced by Antiochos and colleagues, which proposes that eruptions begin with reconnection at a magnetic null high above the core region. Our observations are also consistent with other proposed mechanisms which do not involve early reconnection in the core region. As a corollary, our observations are not consistent with the so-called tether cutting models, which say that the eruption begins with reconnection in the core. The Halpha data further show that a filament in the core region becomes activated near the time of EIT crinkle onset, but little if any of the filament actually erupts, despite the presence of a halo Coronal Mass Ejection (CME) associated with this event.

Sterling, Alphonse C.↗
NASA NTRS2001

H(alpha) Proxies for EIT Crinkles: Further Evidence for Preflare "Breakout"-Type Activity in an Ejective Solar Eruption

We present H(alpha) observations from Big Bear Solar Observatory of an eruptive flare in NOAA Active Region 8210, occurring near 22:30 UT on 1998 May 1. Previously, using the Extreme Ultraviolet Imaging Telescope (EIT) on the Solar and Heliospheric Observatory (SOHO) spacecraft, we found that a pattern of transient, localized brightenings, which we call 'EIT crinkles,' appears in the neighborhood of the eruption near the time of flare onset. These EIT crinkles occur at a location in the active region well separated from the sheared core magnetic fields, which is where the most intense features of the eruption are concentrated. We also previously found that high-cadence images from the Soft X-ray Telescope (SXT) on Yohkoh indicate that soft X-ray intensity enhancements in the core begin after the start of the EIT crinkles. With the H(alpha) data, we find remote flare brightening counterparts to the EIT crinkles. Light curves as functions of time of various areas of the active region show that several of the remote flare brightenings undergo intensity increases prior to the onset of principal brightenings in the core region, consistent with our earlier findings from EIT and SXT data. These timing relationships are consistent with the eruption onset mechanism known as the breakout model, introduced by Antiochos and colleagues, which proposes that eruptions begin with reconnection at a magnetic null high above the core region. Our observations are also consistent with other proposed mechanisms that do not involve early reconnection in the core region. As a corollary, our observations are not consistent with the so-called tether-cutting models, which say that the eruption begins with reconnection in the core. The H(alpha) data further show that a filament in the core region becomes activated near the time of EIT crinkle onset, but little if any of the filament actually erupts, despite the presence of a halo coronal mass ejection (CME) associated with this event.

Sterling, Alphonse C.↗
DOE OSTI2024

Final Report on Predictive Analyses of PRD as Function of Anomalies

This report summarizes the work completed in FY-2024 to analyze the power reactivity decrement (PRD) concepts of the ARC-100 core. The PRD has been traditionally defined by the reactivity change from a hot zero power (HZP) to a particular power. Consequently, the PRD accounts for the core reactivity changes due to increase coolant temperature gradient axially and radially across the core, and increased fuel temperature. The coolant temperature gradient leads to sodium and structure density changes, to radial core expansion from assembly flowering and bowing (due to axial and radial temperature gradients within the assemblies), and to control rod driveline thermal expansion. The fuel temperature increase associated with coolant temperature and power increases leads to Doppler effect and axial thermal expansion. In this work, the normal operating Hot Full Power (HFP) state is the only power level of interest, so analyses focus on the PRD calculated from HZP to HFP. The PRD has been used to assess the reactor safety features asymptotically in unprotected accident scenarios, including the loss of heat sink (LOHS), loss of flow (LOF), and transient overpower (TOP) without scram. The PRD concept relies on the “global” reactivity coefficients A, B, and C that are estimated based on “individual” reactivity effects (Doppler, sodium density, etc.). The objectives of this work are: 1) to improve and verify the methodology used to calculate the ABC coefficients used in the PRD, 2) to assess if the PRD can be used to reliably identify abnormal events. This report fulfills the FY-2024 scope of WBS#1.15.8.3 activity, “ANL0120 – Predictive Analyses of PRD as function of deformation”. The PRD concept is described in Sections 2. Additional effort in refining the methodology for core bowing modeling is performed in Sections 3. Then, two verification exercises are proposed in Section 4 to benchmark these coefficients based on direct neutronic-only calculations and on dynamic core transient simulations. Finally, the PRD approach is assessed for the detection of several unexpected events, such as primary flow perturbation or improper fuel loading, in Section 5.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Modeling and Simulation of Fuel Dispersal During the Loss-of-Coolant Accident

This document is the compilation of the milestone portion to a larger end of project NEUP report. The executive summary of the modeling portion is provided below: In the event of cladding rupture during a postulated LOCA in a pressurized water reactor, fuel particles, along with fission gases, can be expelled into the reactor core from the fractured fuel rod, a phenomenon referred to as fuel dispersal. The initial stage of fuel dispersal is strongly influenced by the high-pressure ejection of fuel fragments, the size and geometry of the ruptured cladding, and the depressurization history of the fuel rod during the postulated LOCA transient. Depending on the location of the burst orifice relative to the quench front, the dispersal event represents an intricate three-phase flow and heat transfer phenomenon, where high-temperature fuel particles carried by the fission gases interact with the coolant within the narrow subchannels of the fuel assemblies, inducing localized phase change. Given the unique multiphysics nature of this phenomena, the current study develops a dedicated computational framework to predict the mass distribution and cooling of dispersing fuel particles, facilitating post-accident assessment and management of the fuel assemblies. Considering the scale of nuclear reactor applications, a continuum three-fluid model is proposed for simulating the transport of solids within the reactor core. With high-temperature fuel fragments within the liquid media, nucleation sites inducing phase changes are dispersed within the flow domain. Coupled with the fact that the transient dispersal event occurs on different time scales than other three-phase flow applications, this study derives a time-averaged three-fluid flow model without losing generality. The assumptions regarding the continuum treatment of the solid phase and the modeling of fuel dispersal behavior are incorporated to simplify the governing equations and derive applicable closure relations. The computational validation of the model was conducted using adiabatic experimental results obtained from ongoing research at Oregon State University, focusing on characterizing fuel dispersal behavior during simulated LOCA conditions. Settlement characteristics of the solids, quantified by the probability distribution of equivalent particles, closely matched the probability density functions reported in experimental studies. The transport of fuel particles within a scaled 5 × 5 lattice of a pressurized-water reactor rod bundle geometry was modeled through a two-fluid Eulerian framework. The required boundary conditions were evaluated from the fuel performance code BISON in a postulated large-break LOCA scenario. The modeling framework considered solid fuel particles as granular matter, interacting with the gaseous dry steam phase and fission gases through the governing interfacial momentum exchange between the participating fluids. The simulation results provided the volume fraction of the solids obtained at the bottom surface of the enclosing tank geometry. Postulated LOCA leading to fuel dispersal phenomena involves the strong coupling between fuel thermomechanics, cladding deformation, thermal-hydraulics, and fuel particle transport. Incorporation of such a strong coupling in numerical simulation is performed by coupling the multiphysics solvers. In the case of fuel dispersal, a strong coupled simulation can be performed by coupling the BISON code for fuel performance, the TRACE code for system-level thermal hydraulics, and fuel particle transport in Multiphysics Object-Oriented Simulation Environment (MOOSE). For such intricate infrastructure, the MOOSE Framework eases the data transfer between codes. The recent version of MOOSE has incorporated the Navier-Stokes module for the fluid flow. An exploratory exercise was done to gain familiarity with finite volume capabilities in the MOOSE framework to incorporate the Spalart-Allmaras (SA) turbulence model. New finite-volume and auxiliary kernels were introduced to assemble the SA transport equation, compute turbulent viscosity, and evaluate wall distance and diagnostic turbulence terms, fully integrated with existing Navier-Stokes modules. A turbulent lid-driven cavity at a Reynolds number of approximately 10,000 is used for verification. MOOSE shows the robust solver convergence and produces the turbulent features. But it underpredicts the velocity profile and turbulent quantities, emphasizing the need to develop improved SA near-wall treatments (e.g., low-Re corrections or wall functions) as a key direction for future work.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1991

A post-core-collapse model for the nucleus of M33

A model for the post-collapse core of M33 is proposed. By analogy with globular clusters, the formation of tight binary systems powers the reexpansion of the core, and it is expected that low-mass X-ray binaries form at a rate about equal to that of all galactic globular clusters combined. About a dozen such binaries should be present, and their combined emission may explain the large and enigmatic unresolved X-ray emission from the nucleus of M33. In addition, tidal formation of cataclysmic binaries may lead to a nova rate of more than about one per century. Numerous blue stragglers have probably formed through mergers caused by stellar collisions, but their density is probably too low to explain the blue color of the nucleus. Young stars are the likely cause for the color, and their presence may complicate the simple dynamical picture presented here.

Hernquist, Lars↗
NASA NTRS1976

A spinar model of Cygnus A

It is proposed that a gravitationally bound supermassive object is located in the 'core' of each of the Cyg A radio clouds and that these objects are responsible for the prolonged ejection of magnetic plasma which produces the synchrotron radio emission. The objects are considered to be analogous to the massive rotators, or spinars, which have been used to model the central radio and optical activity of quasars. The formation of Cyg A is described in terms of the breakup of such an object in the central optical galaxy, and the physical properties of both the compact and the giant clouds are discussed, including the effects of intergalactic drag. It is shown that the spinars are capable of effectively replenishing the extended radio clouds with relativistic electrons, even if they are embedded within the compact clouds. The spinars are modeled quantitatively, and their possible detection is considered. The requirements of the proposed model are compared with those of several other models for bright double radio galaxies.

Flasar, F. M.↗
DOE OSTI2025

Model Development and Analysis of a High-Fidelity Neutron Transport Sensor: The Quadrupole Detector Concept for Measurement of the Neutron Flux Gradient

Accurate reconstruction of the neutron flux distribution within a reactor core is essential for safe and efficient reactor operation. Traditional power shape synthesis in Light Water Reactors relies on hundreds of in-core detectors. However, this approach becomes impractical for Advanced Reactors and Microreactors due to limited space and harsh environments. To address this challenge, we propose a data-driven methodology that combines high-fidelity modeling with real-time ex-core sensor measurements, enabling the reconstruction of core power distribution while minimizing the reliance on intrusive in-core instrumentation. This project began in FY24 and achieved two initial milestones: (1) the definition of a three-year development plan for a Digital Twin framework and (2) the development of high-fidelity neutronics models of the Purdue University Reactor One (PUR-1) using both MCNP6 and OpenMC. The PUR-1 reactor, a zero-power facility, was selected due to its suitability for neutronics-focused modeling and the availability of experimental data for validation. Both models were benchmarked using neutron flux measurements obtained from irradiated gold foils, which were strategically placed within the core during a dedicated campaign in July 2024. This report marks the continuation and completion of those foundational tasks. The OpenMC model has been refined (improved geometric accuracy, expanded cross-section libraries, and refined sampling) and validated using additional experimental data. An updated sensor design—based on quadrupole configuration—was designed to measure both ex-core flux and its spatial gradient. These measurements will serve as inputs to a neural network-based reconstruction algorithm. Finally, the methodology was demonstrated on a two-dimensional test case representative of the heterogeneous material composition of the PUR-1 reactor core. A neural network implementation of the Kirchhoff-Helmholtz integral equation was employed to solve the boundary value problem using peripheral sensor measurements. The preliminary results confirm the strong potential of the proposed approach for accurate and minimally invasive neutron flux reconstruction.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1983

An investigation of MAGSAT and complementary data emphasizing precambrian shields and adjacent areas of West Africa and South America

There is lack of acceptance of quantitative crustal models by specialists on regional geology because of the problem of east-west banding on MAGSAT anomaly maps. The possibility of some of the Earth's magnetic field being created in the mantle below the Curie isotherm is discussed as well as the need to remove spherical harmonics of degrees less than 15 from the anomaly map. Two dimensional models were produced for northern South America that might be considered as working models. These models suggest that the presumed Amazon River depression is better developed near Belem and in the upper Amazon basin than in the central Amazon basin. An attempt is proposed for separating the core field from the crustal field using a flat-Earth model.

Hastings, D. A.↗
NASA NTRS1986

A new source of ozone in the terrestrial upper atmosphere?

The simultaneous measurements of atomic O, O2, O3, and N2 between 90 and 110 km obtained by a rocket-borne mass spectrometer flown during the Aladdin 74 program provide an opportunity to test directly the simple atmosphperic chemical model first proposed more than 50 years ago by S. Chapman, which is today the core of the complex chemistry controlling stratospheric O3. The Aladdin 74 O3 results are found to be significantly in excess of model abundances computed using the most current values of the key chemical parameters. The calculations may possibly be in error due to uncertainties in these key parameters and/or in the measurement of the related species. However, the extra O3 may be a consequence of reactions between ground state O2 and electronically excited O2 resulting from the recombination of atomic O.

Allen, M.↗
NASA NTRS1975

Jupiter

The physical structure of Jupiter is discussed on the basis of data obtained by Pioneers 10 and 11. It is argued that the elemental composition of Jupiter is similar to that of the sun, and it is shown that this argument is supported by measurements of the planet's density and H/He ratio. Jupiter's shape and gravitational field are described, and a model of the planet is proposed in which there are a small iron-silicate core at the center, a very thick liquid-hydrogen stratum divided into metallic (inner) and molecular (outer) layers, and a gaseous atmosphere. According to this model, the excess heat radiated by Jupiter is simply a remnant of the heat generated when the planet coalesced from the solar nebula. The appearance of the planetary disk is described together with the Jovian magnetic field, and the Great Red Spot is shown to be a cyclonic disturbance similar to a hurricane. Effects of the Galilean satellites on the magnetic field are considered.

Wolfe, J. H.↗
NASA NTRS1976

Stellar model chromospheres. V - Alpha Centauri A /G2 V/ and Alpha Centauri B /K1 V/

Models for the upper photospheres and lower chromospheres of Alpha Centauri A and B are derived from high-dispersion spectrograms of the Ca II K-line emission cores and damping wings. Effective temperatures, surface gravities, and ages consistent with the measured broadband colors, metallicities, and absolute magnitudes are estimated for the two stars. The spectrograms are calibrated by fitting the far-wing K profiles with synthetic fluxes based on radiative-equilibrium models, and the model atmospheres are obtained through a partial-redistribution analysis of the line cores and damping wings. These models are compared with those previously proposed for Procyon, Arcturus, and the sun. Many features in all the models are found to be quite similar, and some evidence suggests that Alpha Cen A may be significantly older and more evolved than the sun, even though both stars exhibit similar chromospheric properties.

Ayres, T. R.↗
NASA NTRS1997

A Systematic Study of Explosions in Core Collapse Supernovae

This report covers the research conducted from September 1996 to August 1997 (eighteen months into the three year grant). We have obtained a number of significant findings based on the on the work that we have conducted under this grant during the past year. As we stated in our original proposal the work has focused on multi-dimensional models of the convective epoch in core collapse supernovae. During the past year we have developed a large number of models of the convective epoch in 2-D under two levels of neutrino transport approximation and we are currently working on 3-D models. In the following pages will endeavor to give brief descriptions of our results.

Swesty, F. Douglas↗
NASA NTRS1987

Disturbance and vibration isolation in space stations by means of mechanical decoupling

A decoupling approach to disturbance and vibration isolation in large space stations composed of modules interconnected by flexible members is proposed. A simplified mathematical model for the motion of the space station core and a laboratory module with both torsional vibration and translational motion decouplers is used in this study. The dynamic behavior of the model in the presence of decoupler friction is analyzed. Estimates for the maximum excursions of the laboratory module induced by various types of external disturbance are derived. The paper concludes with a simulation study involving the hard-docking of a space shuttle with a space station.

Wang, P. K. C.↗
NASA NTRS1993

IRC +10420 - A cool hypergiant near the top of the H-R diagram

New observations were obtained for the OH/IR star IRC +10420, including optical/infrared imaging, spectroscopy, polarimetry, and photometry. The observations, which indicate a very rich and complex circumstellar environment for the star. A model for IRC +10420 star is proposed, in which a true core-burning supergiant is surrounded by a rotating equatorial disk of gas and dust that is viewed from about midway above the plate.

Jones, Terry J.↗
NASA NTRS1987

Design and fabrication requirements for low noise supersonic/hypersonic wind tunnels

A schematic diagram of the new proposed Supersonic Low Disturbance Tunnel (SLDT) is shown. Large width two dimensional rapid expansion nozzles guarantee wide quiet test cores that are well suited for testing models at large angle of attack and for swept wings. Hence, this type of nozzle will be operated first in the new proposed large scale SLDT. Test results indicate that the surface finish of pilot nozzles is critical. The local roughness Reynolds number criteria R sub k is approx. = 10 will be used to specify allowable roughness on new pilot nozzles and the new proposed tunnel. Experimental data and calculations for M = 3.0, 3.5, and 5.0 nozzles give N-factors from 6 to 10 for transition caused by Goertler vortices. The use of N is approx. = 9.0 for the Goertler instability predicts quiet test cores in the new M = 3.5 and M = 6.0 axisymmetric long pilot nozzles that are 3 to 4 times longer than observed in the test nozzles to date. The new nozzles utilize a region of radial flow which moves the inflection point far downstream and delays the onset and amplification of the Goertler vortices.

Beckwith, Ivan E.↗
NASA NTRS1987

Mercury's magnetic field - A thermoelectric dynamo?

Permanent magnetism and conventional dynamo theory are possible but problematic explanations for the magnitude of the Mercurian magnetic field. A new model is proposed in which thermoelectric currents driven by temperature differences at a bumpy core-mantle boundary are responsible for the (unobserved) toroidal field, and the helicity of convective motions in a thin outer core (thickness of about 100 km) induces the observed poloidal field from the toroidal field. The observed field of about 3 x 10 to the -7th T can be reproduced provided the electrical conductivity of Mercury's semiconducting mantle approaches 1000/ohm per m. This model may be testable by future missions to Mercury because it predicts a more complicated field geometry than conventional dynamo theories. However, it is argued that polar wander may cause the core-mantle topography to migrate so that some aspects of the rotational symmetry may be reflected in the observed field.

Stevenson, D. J.↗
NASA NTRS1972

Internal constitution of Mars.

Models of the internal structure of Mars consistent with the mass, radius and moment of inertia of the planet are constructed. The models assume that the radius of the core is between 0.36 and 0.60 of the radius of the planet, that the zero-pressure density of the mantle is between 3.54 and 3.49 g/cu cm, and that the planet contains 25 to 28% iron. Meteorite models of Mars containing 25 wt % iron and 12 wt % core are also proposed. It is maintained that Mars in contrast to the earth is an incompletely differentiated planet with a core substantially richer in sulfur than the core of the earth. The absence of a magnetic field on Mars is possibly linked with lack of lunar precessional torque and the small size and high resistivity of the Martian core.

Anderson, D. L.↗
NASA NTRS1999

Numerical Analysis of Temperature Gradients and Interface Shape During Directional Solidification of Al and Al-Cu Alloy Under Microgravity Conditions

Numerical modeling was undertaken to analyze the influence of radial thermal gradient on solid/liquid interface shape and convection patterns during solidification of pure Al and Al-4 wt. % Cu alloy. Steady state calculations were performed for different gravity levels and orientations. Furthermore, transient modeling was undertaken to investigate effect of the solidification velocity. The furnace configuration used in this analysis is the proposed International Space Station Furnace. Results from a thermal model of the furnace core were used as initial boundary conditions for solidification modeling. The Solidification model was adopted from previous work and was based on the finite element code FIDAP. Thermocouple data and quenched interface shape from a pure Al sample flown on the Life Sciences and Microgravity Spacelab (LMS) mission, July 1996 was used for model validation. Good agreement was obtained between the predicted interface shape and that measured from the quenched LMS sample. It was found that the imposed temperature boundary condition must be sufficiently smooth for the heat fluxes in the model to be self-consistent. The model predicted that alloy sample Al-Cu is more sensitive to variations in the gravity level compared to pure Al. For Al-Cu alloy, solute diffusivity is approximately 10(exp 4) times smaller than thermal diffusivity of pure Al. Hence, in a microgravity environment the weak convection has no measurable effect on the heat fluxes, but is still strong enough to affect concentration distribution. Since the alloy melting temperature is determined by concentration the interface shape depends on the level of convection. This was found not to be the case for pure metal.

Bune, Andris V.↗