Search NASA⌕ Search

SEARCH · Search NASA

Results for “crossover”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Low Crossover Polymer Electrolyte Membranes for Direct Methanol Fuel Cells

Direct Methanol Fuel Cells (DMFC's) using polymer electrolyte membranes are promising power sources for portable and vehicular applications. State of the art technology using Nafion(R) 117 membranes (Dupont) are limited by high methanol permeability and cost, resulting in reduced fuel cell efficiencies and impractical commercialization. Therefore, much research in the fuel cell field is focused on the preparation and testing of low crossover and cost efficient polymer electrolyte membranes. The University of Southern California in cooperation with the Jet Propulsion Laboratory is focused on development of such materials. Interpenetrating polymer networks are an effective method used to blend polymer systems without forming chemical links. They provide the ability to modify physical and chemical properties of polymers by optimizing blend compositions. We have developed a novel interpenetrating polymer network based on poly (vinyl - difluoride)/cross-linked polystyrenesulfonic acid polymer composites (PVDF PSSA). Sulfonation of polystyrene accounts for protonic conductivity while the non-polar, PVDF backbone provides structural integrity in addition to methanol rejection. Precursor materials were prepared and analyzed to characterize membrane crystallinity, stability and degree of interpenetration. USC JPL PVDF-PSSA membranes were also characterized to determine methanol permeability, protonic conductivity and sulfur distribution. Membranes were fabricated into membrane electrode assemblies (MEA) and tested for single cell performance. Tests include cell performance over a wide range of temperatures (20 C - 90 C) and cathode conditions (ambient Air/O2). Methanol crossover values are measured in situ using an in-line CO2 analyzer.

Prakash, G. K. Surya↗
NASA NTRS2021

Deriving Mercury Geodetic Parameters with Altimetric Crossovers from the Mercury Laser Altimeter (MLA)

Based on the previous applications of laser altimetry to planetary geodesy at GSFC, we use the recently developed PyXover software package to analyze altimetric crossovers from the Mercury Laser Altimeter (MLA). Using PyXover, we place new constraints on Mercury's geodetic parameters via least squares minimization of crossover discrepancies. We simultaneously solve for orbital corrections for each MLA ground track, for the geodetic parameters of the International Astronomical Union-recommended orientation model for Mercury (pole right-ascension and declination coordinates, prime meridian rotation rate, and librations), and for the Mercury's Love number h2. We calibrate the formal errors of our solution based on closed-loop simulations and on the level of robustness against a priori values, data selection, and parametrization. Our solution of the Mercury's rotational parameters is consistent with published values. In particular, our new estimate for the orientation of the pole places Mercury in a Cassini state, with an obliquity ϵ = 2.031 ± 0.03 arcmin compatible with previous “surface” related measurements. Moreover, we provide a first data-based estimate of the Love number h_(2) = 1.55 ± 0.65. The latter is consistent with expectations from models of Mercury's interior, although its precision does not enable their refinement.

S. Bertone↗
NASA NTRS1987

An analysis of the crossover between local and massive separation on airfoils

Massive separation on airfoils operating at high Reynolds number is an important problem to the aerodynamicist, since its onset generally determines the limiting performance of an airfoil, and it can lead to serious problems related to aircraft control as well as turbomachinery operation. The phenomenon of crossover between local separation and massive separation on realistic airfoil geometries induced by airfoil thickness is investigated for low speed (incompressible) flow. The problem is studied both for the asymptotic limit of infinite Reynolds number using triple-deck theory, and for finite Reynolds number using interacting boundary-layer theory. Numerical results are presented which follow the evolution of the flow as it develops from a mildly separated state to one dominated by the massively separated flow structure as the thickness of the airfoil geometry is systematically increased. The effect of turbulence upon the evolution of the flow is considered, and the impact is significant, with the principal effect being the suppression of the onset of separation. Finally, the effect of surface suction and injection for boundary-layer control is considered. The approach which was developed provides a valuable tool for the analysis of boundary-layer separation up to and beyond stall. Another important conclusion is that interacting boundary-layer theory provides an efficient tool for the analysis of the effect of turbulence and boundary-layer control upon separated vicsous flow.

Barnett, M.↗
NASA NTRS1987

Analysis of crossover between local and massive separation on airfoils

The occurrence of massive separation on airfoils operating at high Reynolds number poses an important problem to the aerodynamicist. In the present study, the phenomenon of crossover, induced by airfoil thickness, between local separation and massive separation is investigated for low speed (incompressible), symmetric flow past realistic airfoil geometries. This problem is studied both for the infinite Reynolds number asymptotic limit using triple-deck theory and for finite Reynolds number using interacting boundary-layer theory. Numerical results are presented which illustrate how the flow evolves from local to massive separation as the airfoil thickness is increased. The results of the triple-deck and the interacting boundary-layer analyses are found to be in qualitative agreement for the NACA four digit series and an uncambered supercritical airfoil. The effect of turbulence on the evolution of the flow is also considered. Solutions are presented for turbulent flows past a NACA 0014 airfoil and a circular cylinder. For the latter case, the calculated surface pressure distribution is found to agree well with experimental data if the proper eddy pressure level is specified.

Barnett, Mark↗
NASA NTRS1989

Geosat crossover analysis in the tropical Pacific. II - Verification analysis of altimetric sea level maps with expendable bathythermograph and island sea level data

Altimetric sea level time series for the tropical Pacific have been generated from the Geosat crossover differences during the classified era of the Geosat mission from April 1985 to September 1986. These are compared with the expendable bathythermograph (XBT)-derived dynamic height and island sea level observations, yielding good agreement. A complex empirical orthogonal function analysis is also applied to the altimetric and XBT results. The analysis demonstrates the dominance of the annual signal in this relatively short time series and the westward propagation of major features away from the equator.

Tai, Chang-Kou↗
NASA NTRS1990

Experimental evidence of a dimensional crossover in Y1Ba2Cu3O(7-delta)

High-resolution torque-magnetometry data have been obtained on an untwinned single crystal of Y1Ba2Cu3O(7-delta) in the temperature range 63-88 K (Tc = 90.5 K). At T = 80 K and above, the data are fitted extremely well with the accepted three-dimensional phenomenological theory, but below this temperature an anomalous torque develops when the magnetic field lies close to the Cu-O planes. The qualitative and quantitative features of these results provide strong evidence that breakdown of the three-dimensional description below 80 K is associated with a crossover to two-dimensional superconducting behavior.

Farrell, D. E.↗
NASA NTRS2002

JASON-1 Precise Orbit Determination (POD) Through the Combination and Comparison of GPS, SLR, DORIS and Altimeter Crossover Data

Jason-1, launched on December 7,2001, is continuing the time series of centimeter level ocean topography observations as the follow-on to the highly successful TOPEX/POSEIDON (T/P) radar altimeter satellite. The precision orbit determination (POD) is a critical component to meeting the ocean topography goals of the mission. T P has demonstrated that the time variation of ocean topography can be determined with an accuracy of a few centimeters, thanks to the availability of highly accurate orbits based primarily on SLR+DORIS tracking. The Jason-1 mission is intended to continue measurement of the ocean surface with the same, if not better accuracy. Fortunately, Jason- 1 POD can rely on four independent tracking data types available including near continuous tracking data from the dual frequency codeless BlackJack GPS receiver. Orbit solutions computed using individual and various combinations of GPS, SLR, DORIS and altimeter crossover data types have been determined from over 100 days of Jason-1 tracking data, The performance of the orbit solutions and tracking data has been evaluated. Orbit solution evaluation and comparison has provided insight into possible areas of refinement. Several aspects of the POD process are examined to obtain orbit improvements including measurement modeling, force modeling and solution strategy. The results of these analyses will be presented.

Luthcke, Scott B.↗
NASA NTRS2002

JASON-1 Precise Orbit Determination (POD) Through the Combination and Comparison of GPS, SLR, DORIS and Altimeter Crossover Data

Jason-1, launched on December 7, 2001, is continuing the time series of centimeter level ocean topography observations as the follow-on to the highly successful TOPEX/POSEIDON (T/P) radar altimeter satellite. The precision orbit determination (POD) is a critical component to meeting the ocean topography goals of the mission. T/P has demonstrated that the time variation of ocean topography can be determined with an accuracy of a few centimeters, thanks to the availability of highly accurate orbits based primarily on SLR+DORIS tracking. The Jason-1 mission is intended to continue measurement of the ocean surface with the same, if not better accuracy. Fortunately, Jason-1 POD can rely on four independent tracking data types available including near continuous tracking data from the dual frequency codeless BlackJack GPS receiver. Orbit solutions computed using individual and various combinations of GPS, SLR, DORIS and altimeter crossover data types have been determined from over 100 days of Jason-1 tracking data. The performance of the orbit solutions and tracking data has been evaluated. Orbit solution evaluation and comparison has provided insight into possible areas of refinement. Several aspects of the POD process are examined to obtain orbit improvements including measurement modeling, force modeling and solution strategy. The results of these analyses will be presented.

Luthcke, S. B.↗
NASA NTRS1995

Quantification of scaling exponents and crossover phenomena in nonstationary heartbeat time series

The healthy heartbeat is traditionally thought to be regulated according to the classical principle of homeostasis whereby physiologic systems operate to reduce variability and achieve an equilibrium-like state [Physiol. Rev. 9, 399-431 (1929)]. However, recent studies [Phys. Rev. Lett. 70, 1343-1346 (1993); Fractals in Biology and Medicine (Birkhauser-Verlag, Basel, 1994), pp. 55-65] reveal that under normal conditions, beat-to-beat fluctuations in heart rate display the kind of long-range correlations typically exhibited by dynamical systems far from equilibrium [Phys. Rev. Lett. 59, 381-384 (1987)]. In contrast, heart rate time series from patients with severe congestive heart failure show a breakdown of this long-range correlation behavior. We describe a new method--detrended fluctuation analysis (DFA)--for quantifying this correlation property in non-stationary physiological time series. Application of this technique shows evidence for a crossover phenomenon associated with a change in short and long-range scaling exponents. This method may be of use in distinguishing healthy from pathologic data sets based on differences in these scaling properties.

NASA Discipline Number 14-10↗
NASA NTRS2002

Test of a new field-theoretical crossover equation-of-state

A new field-theoretical crossover equation-of-state model provides a bridge between the asymptotic behavior close to a liquid-gas critical point and the expected mean field behavior farther away.

equation-of-state critical phenomena liquid-gas cr↗
NASA NTRS1983

At grade optical crossover for monolithic optial circuits

Planar optical circuits may be made to cross through each other, (thus eliminating extra steps required to fabricate elevated, nonintersecting crossovers) by control of the dimensions of the crossing light conductors (10, 12) to be significantly greater than d=0.89.lambda. and the angle of crossing as nearly 90.degree. as conveniently possible. A light trap may be provided just ahead of the intersection to trap any light being reflected in the source conductor at angles greater than about 45.degree.. The light trap may take the form of triangular shaped portions (16a, 16b) on each side of the source conductor with the far side of the triangular portion receiving incident light at an angle so that incident light will be reflected to the other side, or it may take the form of windows (18a, 18b) in place of the triangular portions. Planar optical circuit boards (21-23) may be fabricated and stacked to form a keyboard (20) with intersecting conductors (26-29) and keyholes (0-9) where conductors merge at the broad side of the circuit boards. These keyholes may be prearranged to form an array or matrix of keyholes.

Jamieson, Robert S.↗
NASA NTRS2018

Planar Via-Less Crossover Having Coplanar Waveguide Configurations and Stub Layers

A via-less crossover for use in broadband microwave/mm-wave circuitry, including: a dielectric substrate; a top layer disposed on one side of the substrate and including a microstrip line with an input and an output, two tapered sections placed around the microstrip line along a co-planar waveguide (CPW) central line, one microstrip portion having an input and which connects to one top layer, rectangular stub disposed adjacent to one of the tapered sections, and another microstrip portion having an output and which connects to another top layer, rectangular stub disposed adjacent to the other of the tapered sections; and a ground layer disposed on an opposite side of the substrate and including a bottom layer CPW central line situated in a central cutout and which connects between a bottom layer, rectangular stub on one side and a bottom layer, rectangular stub on the other side situated in ground cutouts, respectively.

U-Yen, Kongpop↗
NASA NTRS2019

Analysis of Mercury Laser Altimeter Crossovers with Improved Mercury and MESSENGER Ephemerides

Based on previous applications of laser altimetry to planetary geodesy at GSFC [Mazarico et al. (2014),(2016)] and taking advantage of new accurate Mercury and MESSENGER orbits by [Genova et al. (2019)], we analyze altimetric crossovers from the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) Laser Altimeter (MLA) to solve for orbital and geodetic parameters (e.g., rotation and orientation). We present our results based on a new Python software package recently developed at GSFC that can simulate and process altimetry data in a closed-loop. Realistic simulations of MLA data, including an appropriate range noise from the instrument and realistic terrain roughness, are performed in order to fully characterize the robustness of the solution. The simulation results are then applied to our analysis of the full dataset acquired by the MLA instrument.

Bertone, Stefano↗