Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal orientation maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

X-ray linear dichroic ptychography

Biominerals such as seashells, coral skeletons, bone, and tooth enamel are optically anisotropic crystalline materials with unique nanoscale and microscale organization that translates into exceptional macroscopic mechanical properties, providing inspiration for engineering new and superior biomimetic structures. Using Seriatopora aculeata coral skeleton as a model, here, we experimentally demonstrate X-ray linear dichroic ptychography and map the c-axis orientations of the aragonite (CaCO 3 ) crystals. Linear dichroic phase imaging at the oxygen K-edge energy shows strong polarization-dependent contrast and reveals the presence of both narrow (<35°) and wide (>35°) c-axis angular spread in the coral samples. These X-ray ptychography results are corroborated by four-dimensional (4D) scanning transmission electron microscopy (STEM) on the same samples. Evidence of co-oriented, but disconnected, corallite subdomains indicates jagged crystal boundaries consistent with formation by amorphous nanoparticle attachment. We expect that the combination of X-ray linear dichroic ptychography and 4D STEM could be an important multimodal tool to study nano-crystallites, interfaces, nucleation, and mineral growth of optically anisotropic materials at multiple length scales.

4D scanning transmission electron microscopy↗
NASA NTRS1993

Studying the kinetics of magnetization in high Tc superconductors

We report the first microscopic maps of magnetic induction in YBa2Cu3O(7-x) crystals which directly show the dependence of flux flow on twin density, polytwin block, and twin boundary orientation. These maps were obtained by means of a recently-improved magneto-optical imaging technique. Pinning was lowest in untwinned regions and increasing with increasing twin density. Anisotropy in twin boundary pinning, defined as the ratio of the magnetic induction gradient across twin boundaries to that along twin boundaries, was 10 at 17 K; this ratio increased with increasing temperature. In polycrystals, twin boundaries also had a strongly anisotropic effect on flux flow into a grain from a grain boundary.

Source record↗
DOE OSTI2020

Analyzer-free linear dichroic ptychography

Linear dichroism is an important tool to characterize the transmission matrix and determine the crystal or orbital orientation in a material. To achieve high-resolution mapping of transmission properties, we introduce the linear-dichroism scattering model in ptychographic imaging and develop an efficient two-stage reconstruction algorithm. Using the proposed algorithm on a uniaxial material, the dichroic transmission matrix can be recovered without an analyzer by using ptychography measurements with as few as three different polarization angles, with the help of an empty region to remove phase ambiguities.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1993

Studying the kinetics of magnetization in high Tc superconductors

The first microscopic maps of magnetic induction in YBa2Cu3O(7-x) crystals which directly show the dependence of flux flow on twin density and polytwin block and twin boundary orientation are reported. These maps were obtained by means of a recently-improved magneto-optical imaging technique. Pinning was lowest in untwinned regions and increased with increasing twin density. An isotropy in twin boundary pinning, defined as the ratio of the magnetic induction gradient across twin boundaries to that along twin boundaries, was 10 at 17 K; this ratio increased with increasing temperature. In polycrystals, twin boundaries also had a strongly anisotropic effect on flux flow into a grain from a grain boundary.

Turchinskaya, Marina↗
DOE OSTI2021

Quantitative agreement between dynamical rocking curves in ultrafast electron diffraction for x-ray lasers

Electron diffraction through a thin patterned silicon membrane can be used to create complex spatial modulations in electron distributions. By precisely varying parameters such as crystallographic orientation and wafer thickness, the intensity of reflections in the diffraction plane can be controlled and by placing an aperture to block all but one spot, we can form an image with different parts of the patterned membrane, as is done for bright-field imaging in microscopy. The patterned electron beams can then be used to control phase and amplitude of subsequent x-ray emission, enabling novel coherent x-ray methods. Furthermore, the electrons themselves can also be used for femtosecond time resolved diffraction and microscopy. As a first step toward patterned beams, we demonstrate experimentally and through simulation the ability to accurately predict and control diffraction spot intensities. We simulate MeV transmission electron diffraction patterns using the multislice method for various crystallographic orientations of a single crystal Si(001) membrane near beam normal. The resulting intensity maps of the Bragg reflections are compared to experimental results obtained at the Accelerator Structure Test Area Ultrafast Electron Diffraction (ASTA UED) facility at SLAC. Furthermore, the fraction of inelastic and elastic scattering of the initial charge is estimated along with the absorption of the membrane to determine the contrast that would be seen in a patterned version of the Si(001) membrane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Topology control of human fibroblast cells monolayer by liquid crystal elastomer

Eukaryotic cells in living tissues form dynamic patterns with spatially varying orientational order that affects important physiological processes such as apoptosis and cell migration. The challenge is how to impart a predesigned map of orientational order onto a growing tissue. Here, we demonstrate an approach to produce cell monolayers of human dermal fibroblasts with predesigned orientational patterns and topological defects using a photoaligned liquid crystal elastomer (LCE) that swells anisotropically in an aqueous medium. The patterns inscribed into the LCE are replicated by the tissue monolayer and cause a strong spatial variation of cells phenotype, their surface density, and number density fluctuations. Unbinding dynamics of defect pairs intrinsic to active matter is suppressed by anisotropic surface anchoring allowing the estimation of the elastic characteristics of the tissues. The demonstrated patterned LCE approach has potential to control the collective behavior of cells in living tissues, cell differentiation, and tissue morphogenesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Nanoscale chemistry and ion segregation in zirconia-based ceramic at grain boundaries by atom probe tomography

In this work nanoscale features that are of importance in the stability of yttria-stabilized tetragonal zirconia (Y-TZP) are quantified through atom probe tomography. In-depth analysis of grain boundary chemistry revealed preferential segregation of lighter and smaller ions towards specific grain boundaries. The relationship between elemental segregation and the local atomistic structure is investigated at the sub-nanometer level to gain insights on nanoscale features associated with the tetragonal-monoclinic phase transformation in Y-TZP through grain boundary characterization. Furthermore, principal component analysis was implemented to reveal any potential biases from varied field evaporation across stabilizer-rich grain boundaries. The observed variations in ion density across different grains suggested a variation in field which was attributed to potential variations in grain crystal orientation. In order to reveal the subtle depletion of oxygen atoms within grain boundaries a new methodology to map oxygen vacancies is proposed, utilizing the relative neighborhood chemistry of individual yttrium atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthesizing pseudo-Kossel lines from neutron transmission data. I. An analytical approach for recovering single-crystal orientation

The energy-dispersive neutron spectra transmitted through single crystals are characterized by sharp Bragg dips at specific wavelengths, where Bragg's law is being fulfilled for certain crystallographic planes. This phenomenon allows for developing methods for crystal-orientation determination techniques similar to electron backscatter diffraction and X-ray diffraction microscopy. This work presents a new procedure to recover the orientation matrix for single crystals using transmission spectra recorded during rotation of a crystal about an axis perpendicular to a polychromatic neutron beam. The proposed method consists of an initial transformation of the as-collected wavelength–rotation maps to a wavevector $\textit{K}$ space, resulting in linear pseudo-Kossel lines that are suitable for analysis and indexing using image-processing procedures. Further, simulated neutron transmission spectra through a copper crystal with known orientations were used to set and prove the numerical approach. This technique may be expanded for cases where the neutron beam intersects multiple single-crystal grains with different orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strongly Anisotropic Thermomechanical Response to Shock Wave Loading in Oriented Samples of the Triclinic Molecular Crystal 1,3,5-Triamino-2,4,6-trinitrobenzene

All-atom molecular dynamics (MD) simulations were used to study shock wave loading in oriented single crystals of the highly anisotropic triclinic molecular crystal 1,3,5-triamino-2,4,6-trinitrobenzene (TATB). The crystal structure consists of planar hydrogen-bonded sheets of individually planar TATB molecules that stack into graphitic-like layers. Shocks were studied for seven systematically prepared crystal orientations with limiting cases that correspond to shock propagation exactly perpendicular and exactly parallel to the graphitic-like layers. The simulations were performed for initially defect-free crystals using a reverse-ballistic configuration that generates explicit, supported shocks. Final longitudinal stress components are between ≈8.5 and ≈10.5 GPa for the 1.0 km s –1 impact speed studied. Orientation-dependent properties are reported including shock speeds, stresses, temperatures, compression ratios, and local material strain rates. Spatiotemporal maps of the temperature, stress tensor, material flow, and molecular orientations reveal complicated processes that arise for specific shock directions. Furthermore, the results indicate that TATB shock response is highly sensitive to crystal orientation, with significant qualitative differences for the time evolution of the stress tensor and temperature, elastic/inelastic compression response, defect formation and growth, critical von Mises stress, and strain rates during shock rise that span nearly an order of magnitude. A variety of inelastic deformation mechanisms are identified, ranging from crumpling of graphitic-like layers to dislocation-mediated plasticity to intense shear strain localization. To our knowledge, these are the first systematic MD simulations and analysis of explicit shock wave propagation along nontrivial crystal directions in a triclinic molecular crystal.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Crystal Orientation Independent Strong TERS Response in Anisotropic ReS2 on Gold

Rhenium disulfide (ReS2) crystallizes in a distorted 1T' lattice with triclinic symmetry arising from Re–Re dimerization, which produces in-plane anisotropic properties and a dense set of Raman-active modes with mixed atomic displacements. Unlike far-field Raman spectroscopy, which shows strong polarization and orientation dependence, tip-enhanced Raman spectroscopy (TERS) probes out-of-plane Raman tensor components. Here we use 785 nm (1.58 eV) gap-mode TERS to investigate monolayer to four-layer thick ReS2 crystals.. TERS maps and averaged spectra reveal that all modes remain invariant under 90° rotation of the crystal, and the only thickness-dependent feature is the emergence of the multilayer breathing mode. These results demonstrate that TERS yields a crystal-orientation-independent Raman response in ReS2 and provides direct access to Raman tensor components that are not easily accessible in conventional far-field measurements.

Valencia Acuna, Pavel A.↗
DOE OSTI2023

A reference-area-free strain mapping method using precession electron diffraction data

Here, in this work, we developed a method using precession electron diffraction data to map the residual elastic strain at the nano-scale. The diffraction pattern of each pixel was first collected and denoised. Template matching was then applied using the center spot as the mask to identify the positions of the diffraction disks. Statistics of distances between the selected diffracted disks enable the user to make an informed decision on the reference and to generate strain maps. Strain mapping on an unstrained single crystal sapphire shows the standard deviation of strain measurement is 0.5%. With this method, we were able to successfully measure and map the residual elastic strain in VO 2 on sapphire and martensite in a Ni 50.3 Ti 29.7 Hf 20 shape memory alloy. This approach does not require the user to select a “strain-free area” as a reference and can work on datasets even with the crystals oriented away from zone axes. This method is expected to provide a robust and more accessible alternative means of studying the residual strain of various material systems that complements the existing algorithms for strain mapping.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2009

Mechanistic Study of Delamination Fracture in Al-Li Alloy C458 (2099)

Delamination fracture has limited the use of lightweight Al-Li alloys. In the present study, electron backscattered diffraction (EBSD) methods were used to characterize crack paths in Al-Li alloy C458 (2099). Secondary delamination cracks in fracture toughness samples showed a pronounced tendency for fracture between grain variants of the same deformation texture component. These results were analyzed by EBSD mapping methods and simulated with finite element analyses. Simulation procedures include a description of material anisotropy, local grain orientations, and fracture utilizing crystal plasticity and cohesive zone elements. Taylor factors computed for each grain orientation subjected to normal and shear stresses indicated that grain pairs with the largest Taylor factor differences were adjacent to boundaries that failed by delamination. Examination of matching delamination fracture surface pairs revealed pronounced slip bands in only one of the grains bordering the delamination. These results, along with EBSD studies, plasticity simulations, and Auger electron spectroscopy observations support a hypothesis that delamination fracture occurs due to poor slip accommodation along boundaries between grains with greatly differing plastic response.

Tayon, W. A.↗
DOE OSTI2023

Grain Boundary Plane Measurement Using Transmission Electron Microscopy Automated Crystallographic Orientation Mapping for Atom Probe Tomography Specimens

Abstract Grain boundaries are critical in determining the properties of materials, including mechanical stability, conductivity, and corrosion resistance. The specific properties of materials depend not only on the misorientation of the crystals, the three most commonly characterized parameters, but also on the angle of the grain boundary plane between the two crystals, the final two parameters in the five-parameter macroscopic description of the grain boundary. The method presented here allows for the direct measurement of all five parameters of the grain boundary in a transmission electron microscopy specimen of various morphologies. This is especially applicable to atom probe specimens, where only a single-tilt axis is generally available, allowing the crystallographic description to be matched to the detailed chemical data available in the atom probe tomography. This method provides a platform for efficient grain boundary analysis in unique samples, saving operator time and allowing for ease of acquisition and interpretation in comparison with traditional electron diffraction methods.

Materials Science↗
DOE OSTI2021

In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites

An ultra-low-strain deformation microstructure was revealed for the first time non-destructively in the bulk interior of an annealed laminated Ti-Al composite-in the "fully recrystallized" Al layer-by a synchrotron-based micro-diffraction technique, namely differential aperture X-ray microscopy (DAXM), through real space mapping with a very high angular resolution (0.01 degrees). This ultra-low-strain deformation microstructure was found to result from the thermal stress, induced during cooling after annealing, due to the different coefficients of thermal expansion for the Ti and Al layers. The annealed sample was further tensile deformed to a strain of 1.66% and followed by in situ DAXM and analyzed by various misorientation mapping methods. The results pointed to the important effects of the initial microstructure and the interface constraint, as well as the grain size and crystal orientation, on the plastic deformation. A gradient in dislocation density from the layer interface to the center was found in the Al layer of the annealed sample, and this gradient increased slightly during tensile deformation. The variation of the dislocation density was further discussed based on the activation and interaction of dislocations in grains of different sizes and orientations during plastic deformation. The findings of this study provided valuable insights in understanding the constraint effect of the laminated metal composite and the design of novel composite materials. (c) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Crystallographic orientation↗
DOE OSTI2021

Surface Conversion of Single-Crystal Bi 2 Se 3 to β-In 2 Se 3

In this work, we demonstrate that the surface layers of single-crystal layered-2D Bi 2 Se 3 can be converted to layered-2D rhombohedral ß-In 2 Se 3 by annealing under a trimethylindium (TMIn) flux. Samples were prepared in a metalorganic chemical vapor deposition (MOCVD) chamber, then transferred under vacuum to a surface analysis chamber for analysis with low-energy electron diffraction (LEED) and Auger electron spectroscopy. Additional ex situ characterization included x-ray diffraction, transmission-electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS) elemental mapping, and Raman spectroscopy. The resulting single-crystal ß-In 2 Se 3 adopts the rhombohedral crystal structure (space group R-3m) and orientation of the underlying Bi 2 Se 3 , and the excess Bi atoms generated by this process create an underlying region of Bi-rich Bi x Se y . Due to the difference in bandgap between Bi 2 Se 3 and In 2 Se 3 , this conversion reaction presents a pathway to lateral heterojunctions if only selected regions are converted by masking the surface to spatially define the TMIn exposure. The conversion may also have implications for heteroepitaxy, because the in-plane lattice constants of Bi 2 Se 3 and In 2 Se 3 (0001) surfaces match those of InP and GaAs (111), respectively, and the natural cleavage planes of a layered-2D crystal facilitate substrate removal and reuse.

14 SOLAR ENERGY↗
DOE OSTI2020

Probing local electrochemistry via mechanical cyclic voltammetry curves

Understanding the mechanical response of an electrode during electrochemical cycling and its correlation to the device electrochemical performance is crucial to improving the performance of insertion-type energy storage devices, electrochemical actuators, water purification, ion separation and neuromorphic computing applications. Here, we visualized the electro-chemo-mechanical coupling behaviors during charge storage of anhydrous and hydrated WO 3 electrodes via in situ atomic force microscopy (AFM) and developed the concept of mechanical cyclic voltammetry (mCV) curves. The relationship between electrochemical current and strain was investigated with simplified models and the results revealed that the proton insertion/deinsertion process could be described through potential-dependent electro-chemo-mechanical coupling coefficients which might indicate changes in insertion processes during electrode cycling. The mCV mapping results highlight the local heterogeneity and show that the charging processes varied across the electrode. These local variations could be further correlated to local morphology, crystal orientations or chemical compositions with proper electrode designs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Twisted Crystalline Organic Semiconductor Photodetectors

Optoelectronic properties of anisotropic crystals vary with direction requiring that the orientation of molecular organic semiconductor crystals is controlled in optoelectronic device active layers to achieve optimal performance. Here, in this work, a generalizable strategy to introduce periodic variations in the out-of-plane orientations of 5,11-bis(triisopropylsilylethynyl)anthradithiophene (TIPS ADT) crystals is presented. TIPS ADT crystallized from the melt in the presence of 16 wt.% polyethylene (PE) forms banded spherulites of crystalline fibrils that twist in concert about the radial growth direction. These spherulites exhibit band-dependent light absorption, photoluminescence, and Raman scattering depending on the local orientation of crystals. Mueller matrix imaging reveals strong circular extinction (CE), with TIPS ADT banded spherulites exhibiting domains of positive or negative CE signal depending on the crystal twisting sense. Furthermore, orientation-dependent enhancement in charge injection and extraction in films of twisted TIPS ADT crystals compared to films of straight crystals is visualized in local conductive atomic force microscopy maps. This enhancement leads to 3.3- and 6.2-times larger photocurrents and external quantum efficiencies, respectively, in photodetectors comprising twisted crystals than those comprising straight crystals.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Point Defect Distributions in ZnSe Crystals: Effects of Gravity Vector Orientation during Physical Vapor Transport Growth

ZnSe crystals were grown by the physical vapor transport technique under horizontal and vertical (stabilized and destabilized) configurations. Secondary ion mass spectroscopy and photoluminescence measurements were performed on the ZnSe samples to map the distributions of [Si], [Fe], [Cu], [Al] and [Li or Na] impurities as well as Zn vacancy, [V(zn)]. The annealings of ZnSe under controlled Zn pressures were studied to correlate the measured photoluminescence emission intensity to the equilibrium Zn partial pressure. In the horizontal grown crystals the segregations of [Si], [Fe], [Al] and [V(zn)] along the gravity vector direction were observed whereas in the vertically stabilized grown crystal the segregations of these point defects were radially symmetrical. No apparent pattern was observed on the measured distributions in the vertically destabilized grown crystal. The observed segregations in the three growth configurations were interpreted based on the possible buoyancy-driven convection in the vapor phase.

Su, Ching-Hua↗