Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystallization kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Comparative study of crystallization kinetics and phase segregation of triple cation and methylammonium lead iodide perovskites on moisture probing using synchrotron X-ray based radiation

3D mixed perovskites have achieved substantial success in boosting solar cell efficiency, but the complicated perovskite crystal formation pathway remains mysterious. Here we present detailed crystallization kinetics of mixed perovskites FA 0.83 MA 0.17 Pb(I 0.83 Br 0.17 ) 3 , where FA is formamidinium and MA is methylammonium, with the addition of Cs + to form a triple cation perovskite (3-CAT), in a comparison with the perovskite building block MAPbI 3 (MAPI) via static grazing-incidence wide-angle X-ray scattering (GIWAXS) and micro-diffraction measurements. Spin-coated films produced α-perovskite peaks with no PbI 2 or δ-intermediate phases, which was a promising result for the 3-CAT perovskite from micro-diffraction measurements. However, the 3-CAT did not remain stable on probing with varied relative humidity (RH) conditions as segregation back to the δ-intermediate and PbI 2 phase after 10 s of exposure to an RH value of 11% was found to occur from the GIWAXS results. When RH levels were elevated to over 100%, segregation peaks of PbI 2 and δ-intermediate (2H, 4H and 6H) became conspicuous as the α-phase intensity diminished, unlike for MAPI that remains relatively stable. The possible cause of this is hydrophilic bonds that form between the 3-CAT crystals and the small annealing window of the best composition perovskite (5% Cs + ) film.

Shatsala, Miller (ORCID:0009000927230192)↗
DOE OSTI2022

Crystallization kinetics and nanoparticle ordering in semicrystalline polymer nanocomposites

There has been considerable interest in the nucleation and crystallization of polymers in the presence of nanoparticles (NPs, or nanofillers in general, NFs). Most of the extensive work in this area has focused on anisotropic, non-Brownian NFs (e.g., clay sheets, carbon nanotubes) whose spatial dispersion state in these nanocomposites is controlled by the process by which they are formed. Hence, NF spatial dispersion is generally limited and often remains poorly characterized. Thermodynamic handles that can be used to control NF dispersion state in the polymer melt include (a) favorable interactions between the polymer chains and the bare NP surfaces, or (b) the density and length of the chains, with the same chemistry as the matrix, grafted to the NP surface. These relatively large NFs merely act as stationary objects that affect the kinetics of nucleation by providing heterogeneous sites, and the crystallization rate by confining the polymer in the melt state. The dispersion state of the NFs can dramatically affect the nucleation and crystallization of the matrix, but in most cases reported, the NFs increase nucleation efficiency relative to the neat polymer. At higher NF loadings, the effect of polymer confinement by the NFs dominates, leading to a decrease in crystal growth rates. This review describes the most important lessons learned from these commonly studied systems and then extends to polymer composite systems containing small, mobile spherical NPs (typically smaller than 100 nm in size). The role of NP mobility, which provides for dynamic confinement of the polymer melt, on the kinetics of polymer crystallization (nucleation, growth, and overall crystallization) and how this behavior is mostly consistent with the case of immobile NF is a second important focus of this review. In addition to the role of NFs on crystallization kinetics, recently reported nanoparticle ordering phenomena such as the effect of matrix crystallization on the organization of small spherical NPs within the amorphous regions of the semicrystalline morphology are discussed. In conclusion, such phenomena are clearly not observed for large NFs and hence provide a point of departure from past works in this area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The role of amorphous ZIF in ZIF-8 crystallization kinetics and morphology

Understanding the composition and structure of amorphous precursor phases is fundamental for elucidating two-step crystallization mechanisms and designing shape- and size-controlled nanomaterials. However, that understanding is largely lacking for metal–organic framework compounds despite their growing significance as functional materials. Here, in this study, we report the crystallization of zeolite imidazolate frameworks-8 (ZIF-8, Zn(C 4 H 5 N 2 ) 2 ) via an amorphous ZIF (am-ZIF) solid precursor phase with a rough stoichiometric composition of Zn(C 4 H 5 N 2 ) 1.78 (C 4 H 6 N 2 ) 0.17 (CH 3 COO) 0.22 . The formation of am-ZIF is attributed to the incomplete deprotonation of 2-Methylimidazole (HmIm) and the involvement of the hydrogen bond between CH 3 COO– and –HN, which can further transform into the dense Dia(Zn) structure with a diamondoid crystal topology in pure water. Taking am-ZIF as a precursor, the tunable dissolution and recrystallization kinetics of am-ZIF into ZIF-8, due to the addition of EtOH and CTAB, allows the selective fabrication of dodecahedral, cubic, and hollow ZIF-8. Overall, an in-depth understanding of the differences in composition and structure of am-ZIF from ZIF-8 and the resulting crystallization kinetics suggests a novel approach to designing metal–organic frameworks with controlled crystal morphology.

36 MATERIALS SCIENCE↗
NASA NTRS1998

Protein Crystallization: Specific Phenomena and General Insights on Crystallization Kinetics

Experimental and simulation studies of the nucleation and growth kinetics of proteins have revealed phenomena that are specific for macromolecular crystallization, and others that provide a more detailed understanding of solution crystallization in general. The more specific phenomena, which include metastable liquid-liquid phase separations and gelation prior to solid nucleation, are due to the small ratio of the intermolecular interaction-range to the size of molecules involved. The apparently more generally applicable mechanisms include the cascade-like formation of macrosteps, as an intrinsic morphological instability that roots in the coupled bulk transport and nonlinear interface kinetics in systems with mixed growth rate control. Analyses of this nonlinear response provide (a) criteria for the choice of bulk transport conditions to minimize structural defect formation, and (b) indications that the "slow" protein crystallization kinetics stems from the mutual retardation of growth steps.

Rosenberger, F.↗
DOE OSTI2020

The Role of Demixing and Crystallization Kinetics on the Stability of Non‐Fullerene Organic Solar Cells

Abstract With power conversion efficiency now over 17%, a long operational lifetime is essential for the successful application of organic solar cells. However, most non‐fullerene acceptors can crystallize and destroy devices, yet the fundamental underlying thermodynamic and kinetic aspects of acceptor crystallization have received limited attention. Here, room‐temperature (RT) diffusion coefficients of 3.4 × 10 −23 and 2.0 × 10 −22 are measured for ITIC‐2Cl and ITIC‐2F, two state‐of‐the‐art non‐fullerene acceptors. The low coefficients are enough to provide for kinetic stabilization of the morphology against demixing at RT. Additionally profound differences in crystallization characteristics are discovered between ITIC‐2F and ITIC‐2Cl. The differences as observed by secondary‐ion mass spectrometry, differential scanning calorimetry (DSC), grazing‐incidence wide‐angle X‐ray scattering, and microscopy can be related directly to device degradation and are attributed to the significantly different nucleation and growth rates, with a difference in the growth rate of a factor of 12 at RT. ITIC‐4F and ITIC‐4Cl exhibit similar characteristics. The results reveal the importance of diffusion coefficients and melting enthalpies in controlling the growth rates, and that differences in halogenation can drastically change crystallization kinetics and device stability. It is furthermore delineated how low nucleation density and large growth rates can be inferred from DSC and microscopy experiments which could be used to guide molecular design for stability.

Hu, Huawei↗
NASA NTRS1975

The formation of lunar breccias - Sintering and crystallization kinetics

The process of clastic breccia formation by viscous sintering in a stress-free environment is analyzed by treating crystallization and sintering as concurrent, competing processes. The kinetic analysis of crystallization is based on the construction of continuous cooling curves corresponding to the degree of crystallinity observed in the matrix of the breccia. These curves are obtained from corresponding time-temperature-transformation curves, which in turn are constructed from measured values of the crystal growth rate together with calculated values of the nucleation frequency. The kinetic analysis of sintering is based on a modification of the Frenkel (1945) treatment of viscous sintering appropriate for conditions of continuous cooling. The analysis is applied to Lunar Composition 70019 to illustrate the approach. It is shown that it is possible from the kinetic analysis to estimate both the rate at which a given breccia cooled and the minimum temperature at which the matrix particles came in contact. The results obtained for Lunar Composition 70019 seem physically reasonable and suggest that this sample cooled on the surface of the moon in its present form rather than buried in an ejecta blanket from which it was later excavated.

Uhlmann, D. R.↗
DOE OSTI2021

Using Nanofiller Assemblies to Control the Crystallization Kinetics of High-Density Polyethylene

Polyethylene-grafted nanoparticles (NPs) are organized into a variety of assemblies in a polydisperse polyethylene melt by tailoring the graft density and molecular weights of the graft chains. Under these conditions we systematically vary NP assemble state and study is consequences on crystal nucleation and growth rates. We find that the nucleation rate is suppressed below that of the unfilled polymer for good NP spatial dispersion. However, poorer dispersion, which leads to the formation of NP assemblies, can accelerate nucleation likely by providing multiple heterogenous sites due to topographical features. We find that a key parameter, the chain overcrowding in the brush, can predict these nucleation trends – in this language, the most enhanced nucleation rate is found when the grafts are the most overcrowded, and hence the least interpenetrated with the matrix chains. This result is consistent with one other literature result which utilized short crystallizable polyethylene glycol grafts in short PEO matrices. The growth kinetics were retarded for all nanocomposites, their temperature dependences were essentially equal to that for the pure polymer (in the absence of NPs) – the NPs thus do not affect secondary nucleation, indicating that the transport of the matrix to the growth front is the rate determining step. Thus, evidently the increase in matrix viscosity, or reduction in growth rates, is directly determined by the agglomeration state of the NPs. These results are consistent with past works with bare silica NPs in PEO, and with silica NPs grafted with amorphous chains in a PEO matrix, suggesting that growth kinetics in these systems apparently follow “universal” behavior. Additionally, there are initial hints that the ratio of the effective surface area of the NP clusters per unit matrix volume provides a unified description of the NP induced confinement that slows growth kinetics. Furthermore, our work thus shows that there is an evolving understanding of the role of NPs on crystallization kinetics, in particular crystal growth where trends appear to be independent of the grafts ability to crystallize.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Manipulating the Crystallization Kinetics by Additive Engineering toward High-Efficient Photovoltaic Performance

Additive processing is proven to be an effective method to improve the efficiency and stability of perovskite solar cells; however, its intrinsic role in directing the crystallization pathway and thus morphology formation remains unknown. In situ grazing-incidence wide-angle x-ray scattering (GIWAXS) is applied to study the function of a 1,8-diiodooctane (DIO) additive in manipulating the crystallization behavior of perovskite thin films. It is seen that the DIO additive could induce multi-stage intermediate crystallization phases and increases the activation energy for nucleation and growth, which postpones the perovskite phase transformation time and broadens the transition zone. The elongated crystallization process affords improved perovskite thin film crystallinity and reduces defect density, which enables a longer carrier diffusion length. As a result, improved device efficiency, moisture, and thermal stability can be achieved. The following study provides a new prospective in understanding the additive function in perovskite thin film morphology control from fundamental parameters, indicating the importance of minor processing conditions in global property management toward high device performance.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Crystallization kinetics in a multiply saturated basalt magma - An experimental study of Luna 24 ferrobasalt

The paper deals with the effects of kinetics on mineral/melt partitioning and on fractional crystallization for a Luna-24 ferrobasalt. The composition is nearly multiply saturated under lunar surface conditions, making it possible to study the response of several mineral phases to kinetic factors during cooling. The differential suppression of the temperature of appearance of olivine, clinopyroxene, and plagioclase causes changes in the liquid line of descent. The course of liquid line of descent is mapped as a function of the cooling rate, and the partitioning of elements between pyroxene/liquid and olivine/liquid is examined.

Grove, T. L.↗
NASA NTRS1977

Crystallization kinetics, viscous flow, and thermal history of lunar breccia 67975

The maximum crystal growth rate for the 67975 matrix composition, about 0.00073 cm/min, was found to occur at about 990 C (undercooling 220 C). The Shaw (1972) model and, to a slightly lesser extent, the Bottinga and Weill (1972) model indicate the variation of viscosity with temperature. Time-temperature-transformation and continuous cooling curves were constructed from the measured crystal growth rates and viscosities and used to estimate the cooling rate required to form bodies with the degree of crystallinity observed in the matrix of the breccia. It is estimated on the basis of kinetic analysis that the 67975 breccia cooled at a rate of about 0.06 C/min over the temperature range below the liquidus. Heat flow analyses indicate that the 67975 breccia did not cool in the size of the lunar sample but as part of a much larger body. Viscous singering as well as cooling of a melt-clast mixture are investigated.

Uhlmann, D. R.↗
NASA NTRS1990

Thermodynamic properties and crystallization kinetics at high liquid undercooling

The heat capacities of liquid and crystalline Au-Pb-Sb alloys in the glass-forming composition range were measured with droplet emulsion and bulk samples. Based on the measured C(sub p) data, the entropy, enthalpy, and Gibbs free energy functions of the eutectic, solid mixture, and undercooled liquid were determined as a function of undercooling and compared with theoretical predictions. The results indicate an isentropic temperature at 313 + or - 5 K, which agrees well with experimental data for the glass transition. A kinetics analysis of the nucleation undercooling response suggests that the proper choice for the Gibbs free energy change during crystallization is most important in analyzing the nucleation kinetics. By classical nucleation theory, the prefactors obtained, based on a variety of theoretical predictions for the driving force, can differ by six orders of magnitude. If the nucleation rates are extrapolated to high undercooling, the extrapolations based on measured heat capacity data show agreement, whereas the predicted nucleation rates are inconsistent with results from drop tower experiments. The implications for microg experiments are discussed.

Fecht, Hans J.↗
DOE OSTI2022

Crystallization kinetics and thermodynamics of an Ag–In–Sb–Te phase change material using complementary in situ microscopic techniques

The crystallization of an amorphous Ag–In–Sb–Te (AIST) phase change material (PCM) is studied using multiple in situ imaging techniques to directly quantify crystal growth rates over a broad range of temperatures. The measurable growth rates span from ≈ 10 –9 to ≈ 20 m/s. Recent results using dynamic transmission electron microscopy (TEM), a photoemission TEM technique, and TEM with sub-framed imaging are reported here and placed into the context of previous growth rate measurements on AIST. Dynamic TEM experiments show a maximum observed crystal growth rate for as-deposited films to be > 20 m/s. It is shown that crystal growth above the glass transition can be imaged in a TEM through use of subframing and a high-frame-rate direct electron detection camera. Challenges associated with the determination of temperature during in situ TEM experiments are described. Finally, preliminary nanocalorimetry results demonstrate the feasibility of collecting thermodynamic data for crystallization of PCMs with simultaneous TEM imaging.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effect of metals on zeolite crystallization kinetics with relevance to nuclear waste glass corrosion

Abstract Geologic disposal of vitrified radioactive material is planned in several countries, but there are remaining uncertainties related to the long-term stability of glass exposed to groundwater. Specifically, the crystallization of aluminosilicate zeolite minerals can accelerate the rate at which glass corrodes and radioactive material is released into the biosphere. In this study, we identify elemental species that may accelerate or suppress zeolite formation using a protocol to examine their effects on zeolite synthesis over a three-day duration. Our results are consistent with previous works demonstrating glass corrosion acceleration in the presence of calcium. Furthermore, we identify two elements—tin and lithium—as inhibitors of zeolite P2 (gismondine, or GIS type) nucleation and, thus, promising components for promoting the long-term durability of glass waste forms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Acceleration of Crystallization Kinetics in Ge‐Sb‐Te‐Based Phase‐Change Materials by Substitution of Ge by Sn

Abstract Thin films of (Ge 1– x Sn x ) 8 Sb 2 Te 11 are prepared to study the impact of Sn‐substitution on properties relevant for application in phase‐change memory, a next‐generation electronic data storage technology. It is expected that substitution decreases the crystallization temperature, but it is not known how the maximum crystallization rate is affected. Ge 8 Sb 2 Te 11 is chosen from the (GeTe) y (Sb 2 Te 3 ) 1– y system of phase‐change materials as a starting point due to its higher crystallization temperature as compared to the common material Ge 2 Sb 2 Te 5 . In situ X‐ray diffraction at 5 K min −1 heating rate is performed to determine the crystallization temperature and the resulting structure. To measure the maximum crystallization rate, femtosecond optical pulses that heat the material repetitively and monitor the resulting increase of optical reflectance are used. Glasses over the entire composition range are prepared using a melt‐quenching process. While at x = 0, 97, subsequent pulses are required for crystallization, one single pulse is enough to achieve the same effect at x = 0.5. The samples are further characterized by optical ellipsometry and calorimetry. The combined electrical and optical contrast and the ability to cycle between states with single femtosecond pulses renders Ge 4 Sn 4 Sb 2 Te 11 promising for photonics applications.

Zalden, Peter↗
DOE OSTI2020

Unraveling the Crystallization Kinetics of 2D Perovskites with Sandwich-Type Structure for High-Performance Photovoltaics

2D perovskite solar cells with high stability and high efficiency have attracted significant attention. A systematical static and dynamic structure investigation is carried out to show the details of 2D morphology evolution. A dual additive approach is used, where the synergy between an alkali metal cation and a polar solvent leads to high-quality 2D perovskite films with sandwich-type structures and vertical phase segregation. Such novel structure can induce high-quality 2D slab growth and reduce internal and surface defects, resulting in a high device efficiency of 16.48% with enhanced continuous illumination stability and improved moisture (55-60%) and thermal (85°C) tolerances. Transient absorption spectra reveal the carrier migration from low n to high n species with different kinetics. An [PbI 6 ] 4- octagon coalescence transformation mechanism coupled with metal and organic cations wrapped is proposed. By solvent vapor annealing, a recrystallization and reorientation of the 2D perovskite slabs occurs to form an ideal structure with improved device performance and stability.

36 MATERIALS SCIENCE↗