Search NASA⌕ Search

SEARCH · Search NASA

Results for “current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

DC-Link Current Minimization Control for Current Source Converter-Based Solid-State Transformer

This article proposes a fast predictive control method and a small DC-link inductor to minimize the DC-link current in current-source converter (CSC)-based solid-state transformer. The DC-link current minimization can significantly reduce power loss and improve efficiency. The challenge of this problem is on improving both steady-state and dynamic performance. PI control methods and large DC-link inductors are conventionally used in the CSC but have limited dynamic performance. A model predictive control (MPC) method is proposed to achieve switching-cycle-level settling time, and the DC-link inductor is sized for 40% ripple to enable fast current change. Importantly, this article also proposes to minimize the DC-link current by varying the current even within a line cycle under single-phase load to improve the steady-state performance, in contrast with the reduction to a constant value in the literature. The proposed MPC features a constant switching frequency without weighting factors. The MPC does not have a high computational burden and is implemented in a regular digital controller for a prototype of soft-switching solid-state transformer (S4T) with reduced conduction loss. The effectiveness of the proposed method has been experimentally verified on the SiC S4T prototype during steady-state and dynamics under different multiport power flow conditions up to 2 kV peak. Here, the DC-link current in the experiments is close to the minimum current with a short zero-vector duration, which further verifies the performance of the proposed method.

14 SOLAR ENERGY↗

Avoidance of impurity-induced current quench using lower hybrid current drive

This work reports observations of a tokamak plasma that experienced a thermal quench due to a large, transient high-Z influx but avoided a current quench. This is argued to be caused by the presence of lower hybrid range of frequency (LHRF) waves that sustain a non-thermal, current-carrying electron population. In Alcator C-Mod L-mode plasmas at I p = 450 kA, n¯ e = 0.5 x 10 20 m –3 , nearly all of the current can be sustained non-inductively by injecting ≃700 kW of LHRF power at 4.6 GHz and n ∥ = 1.9. A sudden influx of a large amount of tungsten, n z /n e ≃ 0.0044, triggers a cooling wave that propagates at 2–3 m s –1 all the way into the core, dropping on-axis T e from 3 keV to temperatures less than measurement floor of 50 eV. An off-axis reheat begins after 100 ms, but T e profiles remain hollow for 300–350 ms after the injection. Throughout this temperature evolution, the plasma density, current and shape remain unchanged to within 10%. Following the expulsion of the tungsten, the plasma returns to its baseline conditions and the plasma ends as planned with a controlled current ramp-down. Energy balance analysis shows the LHRF power continues to be absorbed in the plasma after the thermal quench, as a significant fraction of it is needed to be consistent with radiated power measurements. Examination of current relaxation time, τ R , and fast-electron slowing down time, τ s , indicate the LHRF must contribute to driving current, despite the low temperatures, as the current remains nominally stationary despite τ R < 5 ms and τ s < 50 ms for relativistic electrons. Furthermore, these measurements represent an important existence proof of a possible technique for avoidance of disruptions caused by sudden, unplanned influx of impurities in the form of dust or flakes of high-Z wall material. Implications and suggestions for future experimental and modeling and simulation work are summarized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Superconducting RF Gun with High Current and the Capability to Generate Polarized Electron Beams

High-current low-emittance CW electron beams are indispensable for nuclear and high-energy physics fixed target and collider experiments, cooling high energy hadron beams, generating CW beams of monoenergetic X-rays (in FELs) and gamma-rays (in Compton sources). Polarization of electrons in these beams provides extra value by opening a new set of observables and frequently improving the data quality. We report on the upgrade of the unique and fully functional CW SRF 1.25 MeV SRF gun, built as part of the Coherent electron Cooling (CeC) project, which has demonstrated sustained CW operation with CsK2Sb photocathodes generating electron bunches with record-low transverse emittances and record-high bunch charge exceeding 10 nC. We propose to extend the capabilities of this system to high average current of 100 milliampere in two steps: increasing the current 30-fold at each step with the goal to demonstrate reliable long-term operation of the high-current low-emittance CW SRF guns. We also propose to test polarized GaAs photocathodes in the ultra-high vacuum (UHV) environment of the SRF gun, which has never been successfully demonstrated in RF accelerators.

43 PARTICLE ACCELERATORS↗

Currents and electric fields in the ionosphere due to field-aligned auroral currents

Birkeland (1908, 1913) did a detailed analysis of the upper atmospheric current system in the high-latitude region, and suggested that field-aligned currents flowing into and out of the auroral ionosphere were the driving mechanism for this current system. In the present paper, static electric field and current patterns due to the field-aligned Birkeland currents are examined, using a model in which currents approximating those reported by Iijima and Potemra (1976) are used as input to a global model of the ionospheric conductivities, in which interhemispheric coupling along field lines is included. The model reproduces the main features of the high-latitude current and voltage system and the penetration of these currents within the plasmasphere.

Nisbet, J. S.↗

Current carriers for the field-aligned current system

The Dynamics Explorer satellites have returned a large body of data containing high resolution magnetometer measurements and distributions of charged particles of all but thermal electrons. From these data the relations of the field aligned currents to particle precipitation structures were investigated and the charge carriers were identified. Results include the following: (1) during very quiet periods, field aligned currents exist primarily as fine structure; (2) during onset of substorms, region 1 and region 2 become clearly evident but contain significant structure; (3) as magnetic activity subsides, current regions become less distinct, and structure becomes more dominant; (4) the distribution of the upward currents derived from magnetometer data and calculated from suprathermal electron data agree remarkably well in shape but not necessarily in magnitude; (5) at all local times, 5 eV electrons seldom carry most of the upward current; (6) except for the accelerated inverted-V electrons, the dominant upward current carriers which are measured are below 500 eV and are distributed in energy; (7) dusk upward currents (region 1) are associated with the boundary plasma sheet; and (8) suprathermal electron bursts are important current carrying structures.

Hoffman, R. A.↗

Current carriers for the field-aligned current system

The Dynamics Explorer satellites have returned a large body of data containing high resolution magnetometer measurements and distributions of charged particles of all but thermal electrons. From these data the relations of the field aligned currents to particle precipitation structures were investigated and the charge carriers were identified. Results include the following: (1) during very quiet periods, field aligned currents exist primarily as fine structure; (2) during onset of substorms, region 1 and region 2 become clearly evident but contain significant structure; (3) as magnetic activity subsides, current regions become less distinct, and structure becomes more dominant; (4) the distribution of the upward currents derived from magnetometer data and calculated from suprathermal electron data agree remarkably well in shape but not necessarily in magnitude; (5) at all local times, 5 eV electrons seldom carry most of the upward current; (6) except for the accelerated inverted-V electrons, the dominant upward current carriers which are masured are below 500 eV and are distributed in energy; (7) dusk upward currents (region 1) are associated with the boundary plasma sheet; and (8) suprathermal electron bursts are important current carrying structures.

Hoffman, R. A.↗

Cross-tail current, field-aligned current, and B(y)

Orbits of individual charged particles were traced in a one-dimensional magnetic field model that included a uniform cross-tail component B(sub yo). The effects of B(sub yo) on the cross-tail current distribution j(sub y)(z), the average cross-tail drift velocity(nu(sub y)z), and the average pitch angle change(delta alpha) experienced during current sheet encounters were calculated. The addition of a B(sub yo) that exceeded several tenths of one nanotesla completely eliminated all resonance effects for odd-N orbits. An odd-N resonance involves ions that enter and exit the current sheet on the same side. Pitch angles of nearly all such ions changed substantially during a typical current sheet interaction, and there was no region of large cross-tail drift velocity in the presence of a modest B(sub yo). the addition of a very large B(sub yo) guide field in the direction that enhances the natural drift produces a large j(y) and small (Delta alpha) for ions with all energies. The addition of a modest B(sub yo) had less effect near even-N resonances. In this case, ions in a small energy range were found to undergo so little change in pitch angle that particles which originated in the ionosphere would pass through the current sheet and return to the conjugate ionosphere. Finally, the cross-tail drift of ions from regions dominated by stochastic orbits to regions dominated by either resonant or guiding center orbits was considered. The ion drift speed changed substantially during such transitions. The accompanying electrons obey the guiding center equations, so electron drift is more uniform. Any difference between gradients in the fluxes associated with electron and ion drifts requires the presence of a Birkeland current in order to maintain charge neutrality. This plasma sheet region therefore serves as a current generator. The analysis predicts that the resulting Birkeland current connects to the lowest altitude equatorial regions in which ions drift to or from a point at which stochastic orbits predominate. The proposed mechanism appears only in analyses that include non-guiding-center effects.

Kaufmann, Richard L.↗

Current-Produced Magnetic Field Effects on Current Collection

Current collection by an infinitely long, conducting cylinder in a magnetized plasma, taking into account the magnetic field of the collected current, is discussed. A region of closed magnetic surfaces disconnects the cylinder from infinity. Due to this, the collected current depends on the ratio between this region and the plasma sheath region and, under some conditions, current reduction arises. It is found that the upper-bound limit of current collection is reduced due to this change of magnetic field topology. The effect can be essential even if the orbit-limited model of current collection is valid. This model is used to find the reduction of the total current collected by a cylinder (e.g., a bare tether). Such effect strongly depends on plasma density. The results are applied to a tether system in the ionosphere. For this case, it is found that current reduction can be significant for long tethers in typical dayside ionospheric conditions.

Khazanov, G. V.↗

Current-Produced Magnetic Field Effects on Current Collection

Current collection by an infinitely long, conducting cylinder in a magnetized plasma, taking into account the magnetic field of the collected current, is discussed. A region of closed magnetic surfaces disconnects the cylinder from infinity. Owing to this, the collected current depends on the ratio between this region and the plasma sheath region and, under some conditions, current reduction arises. It is found that the upper bound limit of current collection is reduced due to this change of magnetic field topology. The effect can be substantial even if the orbit-limited model of current collection is valid. This model is used to find the reduction of the total current collected by a cylinder (e.g., a bare tether). It is shown that this effect strongly depends on plasma density. The results are applied to a tether system in the ionosphere, and it is found that current reduction can be significant for long tethers in typical dayside ionospheric conditions.

Khazanov, G. V.↗

Lightning Return-Stroke Current Waveforms Aloft, From Measured Field Change, Current, and Channel Geometry

Direct current measurements are available near the attachment point from both natural cloud-to-ground lightning and rocket-triggered lightning, but little is known about the rise time and peak amplitude of return-stroke currents aloft. We present, as functions of height, current amplitudes, rise times, and effective propagation velocities that have been estimated with a novel remote-sensing technique from data on 24 subsequent return strokes in six different lightning flashes that were triggering at the NASA Kennedy Space Center, FL, during 1987. The unique feature of this data set is the stereo pairs of still photographs, from which three-dimensional channel geometries were determined previously. This has permitted us to calculate the fine structure of the electric-field-change (E) waveforms produced by these strokes, using the current waveforms measured at the channel base together with physically reasonable assumptions about the current distributions aloft. The computed waveforms have been compared with observed E waveforms from the same strokes, and our assumptions have been adjusted to maximize agreement. In spite of the non-uniqueness of solutions derived by this technique, several conclusions seem inescapable: 1) The effective propagation speed of the current up the channel is usually significantly (but not unreasonably) faster than the two-dimensional velocity measured by a streak camera for 14 of these strokes. 2) Given the deduced propagation speed, the peak amplitude of the current waveform often must decrease dramatically with height to prevent the electric field from being over-predicted. 3) The rise time of the current wave front must always increase rapidly with height in order to keep the fine structure of the calculated field consistent with the observations.

Willett, J. C.↗

Fault Current Control and Protection in a Standalone DC Microgrid Using Adaptive Droop and Current Derivative

This report presents a novel fault detection, characterization, and fault current control algorithm for a standalone solar-photovoltaic (PV) based dc microgrids. The protection scheme is based on the current derivative algorithm. The overcurrent and current directional/differential comparison based protection schemes are incorporated for the dc microgrid fault characterization. For a low impedance fault, the fault current is controlled based on the current/voltage thresholds and current direction. Generally, the droop method is used to control the power-sharing between the converters by controlling the reference voltage. In this article, an adaptive droop scheme is also proposed to control the fault current by calculating a virtual resistance R droop , and to control the converter output reference voltage. For a high impedance fault, differential comparison method is used to characterize the fault. These algorithms effectively control the converter pulsewidth and reduce the flow of source current from a particular converter, which helps to increase the fault clearing time. Additionally, a trip signal is sent to the corresponding dc circuit breaker (DCCB), to isolate the faulted converter, feeder or a dc bus. The dc microgrid protection design procedure is detailed, and the performance of the proposed method is verified by simulation analysis.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Energy of Plasma Flows Accelerated in a Current Sheet as a Function of the Current Flowing through the Sheet

The energy of directed plasma flows accelerated in a current sheet is studied experimentally as a function of the current flowing through the sheet. It is found that the plasma flow energy rapidly increases with increasing current amplitude, nearly according to a power law with an exponent of 1.8–1.9. Using relations for the neutral current sheet and the concept of plasma acceleration under action of the Ampère forces, the energy of directed plasma flows is estimated as a function of the total current flowing through the sheet. It is shown that, as the current rises, the ion energy grows due to an increase in both the Ampère forces and the width of the current sheet within which plasma is accelerated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A global analytical representation of the magnetic field produced by the region 2 Birkeland currents and the partial ring current

A quantitative model is developed of the magnetic field produced by the electric current system of region 2 Birkeland currents, closed via the partial ring current. The distribution of j-perpendicular is computed from a given axially asymmetric spatial distribution of hot isotropic magnetospheric plasma over an infinitely thin L shell in an axisymmetric purely dipolar geomagnetic field, while the field-aligned current density is found from the continuity of the net electric current. The magnetic field distribution is derived by a Biot-Savart integral over the electric current system. An assumed cosine dependence of the plasma pressure on local time makes it possible to reduce the problem of analytical representation of the B field to two dimensions. The obtained numerical fits for the partial ring current/region 2 Birkeland current magnetic field are relatively simple, continuous, and valid throughout the whole extraterrestrial space from ionospheric heights up to tens of earth radii.

Tsyganenko, N. A.↗

Comparison of buoy-mounted 74-kHz acoustic Doppler current profilers with vector-measuring current meters

In December 1991, the National Data Buoy Center (NDBC) deployed two meteorological buoys in the Southern California Bight on a transect between San Diego and San Clemente Island. Each buoy consisted of a 10-m discus hull instrumented to measure a suite of meteorological parameters, and, for the first time in the NDBC buoy program, acoustic Doppler current profilers (ADCPs) were included to gather hourly current profiles beneath the two buoys. Moorings instrumented with seven vector-measuring current meters (VMCMs) were deployed adjacent to the NDBC buoys for several months and provided current observations for comparison with the ADCP measurements. When wave-induced buoy motion is not overly large, the observations of horizontal current made by the ADCP and the VMCM are highly correlated. Time series of differences between ADCP and VMCM measurements are characterized by a mean difference (bias error) of about 0.01 m/s and standard deviation of about 0.035 m/s for 1-h observations. Estimates of current spectra from ADCP and VMCM records suggest that the ADCP system can be characterized by a white noise level of 2 x 10(exp -3) sq m/sq s/cph. However, when the in situ environment is such that large surface waves are present (including breaking waves and whitecaps), erroneous current values are usually reported by the ADCP. Mean values of vertical velocities reported by the ADCP appear to be much larger than what could be physically expected and are therefore deemed unreliable.

Winant, Clinton↗

Recent Simulation Results on Ring Current Dynamics Using the Comprehensive Ring Current Model

Plasma sheet conditions and electromagnetic field configurations are both crucial in determining ring current evolution and connection to the ionosphere. In this presentation, we investigate how different conditions of plasma sheet distribution affect ring current properties. Results include comparative studies in 1) varying the radial distance of the plasma sheet boundary; 2) varying local time distribution of the source population; 3) varying the source spectra. Our results show that a source located farther away leads to a stronger ring current than a source that is closer to the Earth. Local time distribution of the source plays an important role in determining both the radial and azimuthal (local time) location of the ring current peak pressure. We found that post-midnight source locations generally lead to a stronger ring current. This finding is in agreement with Lavraud et al.. However, our results do not exhibit any simple dependence of the local time distribution of the peak ring current (within the lower energy range) on the local time distribution of the source, as suggested by Lavraud et al. [2008]. In addition, we will show how different specifications of the magnetic field in the simulation domain affect ring current dynamics in reference to the 20 November 2007 storm, which include initial results on coupling the CRCM with a three-dimensional (3-D) plasma force balance code to achieve self-consistency in the magnetic field.

Zheng, Yihua↗

Ring Current Dynamics in Moderate and Strong Storms: Comparative Analysis of TWINS and IMAGE/HENA Data with the Comprehensive Ring Current Model

We present a comparative study of ring current dynamics during strong and moderate storms. The ring current during the strong storm is studied with IMAGE/HENA data near the solar cycle maximum in 2000. The ring current during the moderate storm is studied using energetic neutral atom (ENA) data from the Two Wide-Angle Imaging Neutral- Atom Spectrometers (TWINS) mission during the solar minimum in 2008. For both storms, the local time distributions of ENA emissions show signatures of postmidnight enhancement (PME) during the main phases. To model the ring current and ENA emissions, we use the Comprehensive Ring Current Model (CRCM). CRCM results show that the main-phase ring current pressure peaks in the premidnight-dusk sector, while the most intense CRCM-simulated ENA emissions show PME signatures. We analyze two factors to explain this difference: the dependence of charge-exchange cross section on energy and pitch angle distributions of ring current. We find that the IMF By effect (twisting of the convection pattern due to By) is not needed to form the PME. Additionally, the PME is more pronounced for the strong storm, although relative shielding and hence electric field skewing is well developed for both events.

Buzulukova, N.↗

Thickness-Dependent Current Density and Flux Distribution in Thin Current-Carrying Superconducting Films Exposed to a Magnetic Field

With the rapid development of high-temperature superconductors, it is of great significance to get the precise current density and flux distribution within thin high-temperature superconducting films subjected to a transport current and an applied magnetic field. The transport current distribution and flux density in thin high-temperature superconducting films are calculated by a numerical method based on the Kim model and exponential model in this paper. The influences of transport current, applied magnetic field, width, and thickness of a superconducting film on the current distribution are discussed. The results reveal that the thickness has a significant effect on the critical current density of superconducting films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗