Search NASA⌕ Search

SEARCH · Search NASA

Results for “curvature effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Curvature effects on the stability of laminar boundary layers on swept wings

The stability of the laminar boundary layer on a swept wing is examined. An improved linear stability theory which includes the effects of body and streamline curvature and compressibility is utilized for the calculations. The computed N-factor is correlated with the onset of transition. For this study, only test conditions where transition is due to the growth of highly amplified crossflow instabilities on convex surfaces are examined. The calculations show that the effect of the curvature terms is to dramatically reduce local amplification rates in regions where body and streamline curvature are large. For the cases where transition occurred ahead of the pressure minimum on the upper surface of the wing, the N-factor at transition onset is near 9 when the effects of body and streamline curvature are included in the computations. When the curvature terms are neglected, the average N-factor is about 17. The calculations show that traveling crossflow waves are most amplified.

Collier, F. S., Jr.↗
NASA NTRS1978

A procedure for calculating laminar, transitional and/or turbulent three-dimensional boundary layers including surface curvature effects about arbitrary blunt-nosed bodies

The governing equations for laminar, transitional and/or turbulent, incompressible, three-dimensional boundary layers are solved numerically. The equations are developed in terms of an orthogonal surface coordinate system and include surface curvature effects. The coordinates are generated numerically, while the inviscid flow is obtained from a general potential flow procedure. The only restrictions on body geometry are that it possess a blunt nose and a plane of symmetry. The boundary-layer equations, after being transformed into similarity type variables, are solved using the implicit finite-difference Krause scheme. Various test cases are presented to establish the accuracy of the resulting computer program.

Dwoyer, D. L.↗
NASA NTRS1972

Displacement interaction and surface curvature effects on hypersonic boundary layers.

The title problem was studied employing implicit finite-difference methods to obtain numerical solutions to a composite set of boundary-layer equations valid to second order. Results are given for flow up a two-dimensional cubic compression ramp for free-stream Mach numbers of 6, 8, and 12.25 and for free-stream Re/inch equal to 85,800 and 25,800 at a wall-to-stagnation temperature ratio of 0.223. Comparisons with independent theories and experimental results are given. Nonsingular separation was produced at a free-stream Mach number of 12.25. For all cases considered, displacement and curvature effects canceled one another when a consistent treatment of inviscid and viscous curvature corrections was employed - the second-order theory virtually reproducing the first-order results.

Wornom, S. F.↗
NASA NTRS1995

Localized tearing modes in the magnetotail driven by curvature effects

The stability of collisionless tearing modes is examined in the presence of curvature drift resonances and the trapped particle effects. A kinetic description for both electrons and ions is employed to investigate the stability of a two-dimensional equilibrium model. The main features of the study are to treat the ion dynamics properly by incorporating effects associated with particle trajectories in the tail fields and to include the linear coupling of trapped particle modes. Generalized dispersion relations are derived in several parameter regimes by considering two important sublayers of the reconnecting region. For a typical choice of parameters appropriate to the current sheet region, we demonstrate that localized tearing modes driven by ion curvature drift resonance effects are excited in the current sheet region with growth time of the order of a few seconds. Also, we examine nonlocal characteristics of tearing modes driven by curvature effects and show that modes growing in a fraction of a second arise when mode widths are larger than the current sheet width. Further, we show that trapped particle effects, in an interesting frequency regime, significantly enhance the growth rate of the tearing mode. The relevance of this theory for substorm onset phase and other features of the substorms is briefly discussed.

Sundaram, A. K.↗
DOE OSTI2025

Curvature effects in the reaction-diffusion system governing frontal polymerization

Frontal polymerization is a fast and energy-efficient curing process of thermoset polymers involving the self-sustained propagation of a sharp front that transforms a liquid monomer or gel into a polymer. The temperature, speed, and geometry of the polymerization front are closely intertwined quantities that can affect the curing process and the mechanical properties of the polymer. This work investigates the effect of the front curvature on the front propagation speed based on a reaction-diffusion model. The proposed analytical relations between front speed and curvature are verified by finite element simulations and validated through experiments. The models show that a concave front has a higher front temperature and speed than its convex counterpart. When the curvature of a convex front reaches a critical value, the reaction can no longer be sustained, and the front is quenched. The relation between the speed of a steadily propagating front and its geometry is derived, showing good agreement with experimental observations. This study also provides analytical estimates of the thickness of the polymerization front and insight into the relationship between the front curvature and the kinetics of the exothermic reaction.

42 ENGINEERING↗
NASA NTRS1973

Experiment on convex curvature effects in turbulent boundary layers.

Turbulent boundary layers along a convex surface of varying curvature were investigated in a specially designed boundary-layer tunnel. A fairly complete set of turbulence measurements was obtained. The effect of curvature is striking. For example, along a convex wall the Reynolds stress is decreased near the wall and vanishes about midway between the wall and the edge of a boundary layer where there exists a velocity profile gradient created upstream of the curved wall.

So, R. M. C.↗
DOE OSTI2023

Stress and Curvature Effects in Layered 2D Ferroelectric CuInP 2 S 6

Nanoscale ferroelectric 2D materials offer the opportunity to investigate curvature and strain effects on materials functionalities. Among these, CuInP 2 S 6 (CIPS) has attracted tremendous research interest in recent years due to combination of room temperature ferroelectricity, scalability to a few layers thickness, and ferrielectric properties due to coexistence of 2 polar sublattices. Here, we explore the local curvature and strain effect on polarization in CIPS via piezoresponse force microscopy and spectroscopy. To explain the observed behaviors and decouple the curvature and strain effects in 2D CIPS, we introduce the finite element Landau–Ginzburg–Devonshire model, revealing strong changes in hysteresis characteristics in regions subjected to tensile and compressive strain. The piezoresponse force microscopy (PFM) results show that bending induces ferrielectric domains in CIPS, and the polarization-voltage hysteresis loops differ in bending and nonbending regions. Furthermore, these studies offer insights into the fabrication of curvature-engineered nanoelectronic devices.

2D materials↗
NASA NTRS1995

Weakly nonparallel and curvature effects on stationary crossflow instability: Comparison of results from multiple-scales analysis and parabolized stability equations

A multiple-scales approach is used to approximate the effects of nonparallelism and streamwise surface curvature on the growth of stationary crossflow vortices in incompressible, three-dimesional boundary layers. The results agree with results predicted by solving the parabolized stability equations in regions where the nonparallelism is sufficiently weak. As the nonparallelism increases, the agreement between the two approaches worsens. An attempt has been made to quantify the nonparallelism on flow stability in terms of a nondimensional number that describes the rate of change of the mean flow relative to the disturbance wavelength. We find that the above nondimensional number provides useful information about the adequacy of the multiple-scales approximation for different disturbances for a given flow geometry, but the number does not collapse data for different flow geometries onto a single curve.

Singer, Bart A.↗
NASA NTRS1971

A Numerical Study of Displacement Body and Curvature Effects on Incompressible and Compressible Laminar Boundary Layers

This technique has been applied to study such effects on incompressible flow around cylinders at moderate to low Reynolds numbers and for compression ramps at hypersonic Mach numbers by employing a finite difference method to obtain numerical solutions. The results indicate that the technique can be applied successfully in both regimes and does predict the correct trend in regions of large curvature and displacement body effects. It was concluded that curvature corrections should only be attempted in cases where all displacement effects can be fully accounted for.

Wornom, S. F.↗
NASA NTRS1983

A mixing-length model for the prediction of convex curvature effects on turbulent boundary layers

A mixing-length model is developed for the prediction of turbulent boundary layers with convex streamwise curvature. For large layer thickness ratio, delta/R greater than 0.05, the model scales mixing length on the wall radius of curvature, R. For small delta/R, ordinary flat wall modeling is used for the mixing-length profile with curvature corrections, following the recommendations of Eide and Johnston (1976). Effects of streamwise change of curvature are considered; a strong lag from equilibrium is required when R increases downstream. Fifteen separate data sets were compared, including both hydrodynamic and heat transfer results. Six of these computations are presented and compared to experiment.

Adams, E. W.↗
NASA NTRS1978

Turbulent boundary layers with large streamline curvature effects

It has been shown that turbulent flows are greatly affected by streamline curvature. In spite of this and the fact that curved shear flows are frequently encountered in engineering applications, the predictions of such flows are relatively less developed than the predictions of two-dimensional plane flows. Recently, various attempts were made by different investigators; however, their methods are only successful when the product of the boundary layer thickness to the local surface curvature is approximately 0.05. The present paper investigates the more general case where this product is in the range from 0.1 to 0.5. Results show that the calculated boundary-layer characteristics for arbitrary free stream conditions are in good agreement with measurements.

So, R. M. C.↗
NASA NTRS1993

Effect of curvature on stationary crossflow instability of a three-dimensional boundary layer

An incompressible three-dimensional laminar boundary-layer flow over a swept wing is used as a model to study both the wall-curvature and streamline-curvature effects on the stationary crossflow instability. The basic state is obtained by solving the full Navier-Stokes (N-S) equations numerically. The linear disturbance equations are cast on a fixed, body-intrinsic, curvilinear coordinate system. Those nonparallel terms which contribute mainly to the streamline-curvature effect are retained in the formulation of the disturbance equations and approximated by their local finite difference values. The resulting eigenvalue problem is solved by a Chebyshev collocation method. The present results indicate that the convex wall curvature has a stabilizing effect, whereas the streamline curvature has a destabilizing effect. A validation of these effects with an N-S solution for the linear disturbance flow is provided.

Lin, Ray-Sing↗
NASA NTRS1979

Coolant tube curvature effects on film cooling as detected by infrared imagery

Reported herein are comparative thermal film cooling footprints observed by infrared imagery from straight, curved and looped coolant tube geometries. It was hypothesized that the difference in secondary flow and turbulence structure of flow through these three tubes should influence the mixing properties between the coolant and mainstream. The coolant was injected across an adiabatic plate through a hole angled at 30 deg to the surface in line with the free stream flow. The data cover a range of blowing rates from 0.37 to 1.25 (mass flow per unit area of coolant divided by free stream). Average temperature difference between coolant and tunnel air was 25 C. Data comparisons confirmed that coolant tube curvature significantly influences film cooling effectiveness.

Papell, S. S.↗
NASA NTRS1982

Curvature effects and turbulent boundary layers

Results are examined from an experiment conducted to determine quantitatively the secondary factors which affect the response of a turbulent boundary layer to convex curvature and to examine the recovery process after curvature ended. The variation of Stanton number with streamwise distance and with enthalpy thickness Reynolds number for the baseline case is shown. The effect of delta sub .99/R on the velocity of the potential core would have if we extended to the wall with no viscous effects, of free stream acceleration, of an unheated starting length, and of boundary layer maturity are discussed. Mixing length and turbulent Prandtl number models are reviewed.

Moffat, R. J.↗
NASA NTRS1989

An analysis of curvature effects for the control of wall-bounded shear flows

The Reynolds stress transport equations are used to predict the effects of simultaneous and sequential combinations of distortions on turbulent boundary layers. The equations are written in general orthogonal curvilinear coordinates, with the curvature terms expressed in terms of the principal radii of curvature of the respective coordinate surfaces. Results are obtained for the cases of two-dimensional and three-dimensional flows in the limit where production and pressure-strain redistribution dominate over diffusion effects.

Gatski, T. B.↗
DOE OSTI2025

Nonideal stability analysis of differentially rotating plasmas with global curvature effects

The linear stability of global nonaxisymmetric modes in differentially rotating, magnetized, nonideal plasma is critical to classifying turbulence and transport phenomena. We investigate the competition between the local magneto-rotational instability (MRI) and the magneto-curvature instability (MCI)—a distinct nonaxisymmetric low-frequency curvature-driven global branch that appears alongside MRI. Here, to accomplish this, we developed a nonideal global spectral method, which is validated against NIMROD code simulations. This spectral approach allows for the direct derivation of an extended effective potential formalism and a resistive Alfvénic resonance condition, providing a framework for direct analysis of energy contributions and confinement mechanisms. Our study reveals that the global, low-frequency MCI persists at low magnetic Reynolds numbers (Rm), whereas the localized, high-frequency MRI is stabilized by diffusive broadening of its structure around its Alfvénic resonances. Consequently, we identify the global MCI branch as the primary onset mechanism for nonaxisymmetric magnetohydrodynamic instability in systems with finite curvature, e.g., astrophysical rotators. We establish distinct parameter regimes for mode dominance: MCI prevails in geometrically moderate-thickness disks with intermediate curvature and radial gaps, while MRI dominates in thin, low-curvature disks with large radial gaps. Mode competition is also highly sensitive to the flow profile, particularly vorticity and its gradient, with nonuniform shear profiles exhibiting more robust instability due to flow curvature (i.e., the second derivative of the flow profile) and shear contributions. A key outcome is the development of spectral diagrams derived from the global spectral method. These diagrams comprehensively map dominant instabilities and their characteristics, offering a predictive tool for critical onset parameters (i.e., flow curvature, magnetic field, and Rm) and facilitating the interpretation of experimental and simulation results. Notably, these diagrams demonstrate that the global MCI is generally the sole unstable mode at the initial onset of nonaxisymmetric instability.

Haywood, Alexander [Princeton Univ., NJ (United St↗
NASA NTRS1992

Temperature and initial curvature effects in low-density panel flutter

The panel flutter phenomenon is studied assuming free-molecule flow. This kind of analysis is relevant in the case of hypersonic flight vehicles traveling at high altitudes, especially in the leeward portion of the vehicle. In these conditions the aerodynamic shear can be expected to be considerably larger than the pressure at a given point, so that the effects of such a loading are incorporated into the structural model. Both the pressure and shear loadings are functions of the panel temperature, which can lead to great variations on the location of the stability boundaries for parametric studies. Different locations can, however, be 'collapsed' onto one another by using as ordinate an appropriately normalized dynamic pressure parameter. This procedure works better for higher values of the panel temperature for a fixed undisturbed flow temperature. Finally, the behavior of the system is studied when the panel has some initial curvature. This leads to the conclusion that it may be unrealistic to try to distinguish between a parabolic or sinusoidal initial shape.

Resende, Hugo B.↗