Search NASA⌕ Search

SEARCH · Search NASA

Results for “damage threshold”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

High-Damage-Threshold Beam Shaping Using Binary Phase Plates

An approach to near-field beam shaping using a pixellated binary phase plate is presented. Continuous spatial-intensity modulation without phase modulation is obtained in an image plane of the phase plate after far-field Fourier filtering. The phase plate is a substrate with etched pixels introducing a pi-phase shift at the use wavelength. The pixel distribution is designed with a modified error-diffusion algorithm. Because of the absence of absorption from the metal layer of conventional shapers, the damage threshold of a phase shaper is mostly limited by the damage threshold of the substrate. A damage threshold of the order of 40 J/cm^2 is demonstrated in the nanosecond regime.

Dorrer, C↗

Development of high damage threshold laser-machined apodizers and gain filters for laser applications

We have developed high damage threshold filters to modify the spatial profile of a high energy laser beam. The filters are formed by laser ablation of a transmissive window. The ablation sites constitute scattering centers which can be filtered in a subsequent spatial filter. Finally, by creating the filters in dielectric materials, we see an increased laser-induced damage threshold from previous filters created using ‘metal on glass’ lithography.

47 OTHER INSTRUMENTATION↗

Damage threshold of coating materials on x-ray mirror for x-ray free electron laser

We evaluated the damage threshold of coating materials such as Mo, Ru, Rh, W, and Pt on Si substrates, and that of uncoated Si substrate, for mirror optics of X-ray free electron lasers (XFELs). Focused 1 μm (full width at half maximum) XFEL pulses with the energies of 5.5 and 10 keV, generated by the SPring-8 angstrom compact free electron laser (SACLA), were irradiated under the grazing incidence condition. The damage thresholds were evaluated by in situ measurements of X-ray reflectivity degradation during irradiation by multiple pulses. The measured damage fluences below the critical angles were sufficiently high compared with the unfocused SACLA beam fluence. Rh coating was adopted for two mirror systems of SACLA. One system was a beamline transport mirror system that was partially coated with Rh for optional utilization of a pink beam in the photon energy range of more than 20 keV. The other was an improved version of the 1 μm focusing mirror system, and no damage was observed after one year of operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Innovative solutions to improve laser damage thresholds of optical structures

Optical structures, including thin film designs and components with topography, are provided that achieve significantly improved laser damage thresholds and/or ultra-low-loss. These advances may be achieved by utilizing a bulk window including a material having a band gap that is at least 5.0 eV and a thickness. The bulk window can be configured to increase the laser induced damage threshold of the underlying optical structure.

Nguyen, Hoang T.↗

Experimental Determination of Damage Threshold Characteristics of IR Compatible Optical Materials

The accelerating gradient in a laser-driven dielectric accelerating structure is often limited by the laser damage threshold of the structure. For a given laser-driven dielectric accelerator design, we can maximize the accelerating gradient by choosing the best combination of the accelerator's constituent material and operating wavelength. We present here a model of the damage mechanism from ultrafast infrared pulses and compare that model with experimental measurements of the damage threshold of bulk silicon. Additionally, we present experimental measurements of a variety of candidate materials, thin films, and nanofabricated accelerating structures.

36 MATERIALS SCIENCE↗

Mercury Bromide (HgBr{sub 2}): A promising nonlinear optical material in IR region with a high laser damage threshold

Nonlinear optical (NLO) crystals have played a key role in laser technology, and the existing materials for the IR range showed relatively low laser damage threshold in common. A NLO material HgBr{sub 2} is presented here. It shows a powder second harmonic generation about ten times as large as that of KH{sub 2}PO{sub 4}, a wide transparency in whole mid-IR region (from 2.5 to 25 {mu}m), and a good stability to the environment. Most importantly it exhibits a high laser damage threshold of about 0.3 GW/cm{sup 2}. Therefore, it is believed that HgBr{sub 2} is a promising candidate for NLO materials in the IR region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement and modeling of infrared nonlinear absorption coefficients and laser-induced damage thresholds in Ge and GaSb

Using a simultaneous fitting technique to extract nonlinear absorption coefficients from data at two pulse widths, we measure two-photon and free-carrier absorption coefficients for Ge and GaSb at 2.05 and 2.5 {mu}m for the first time, to our knowledge. Results agreed well with published theory. Single-shot damage thresholds were also measured at 2.5 {mu}m and agreed well with modeled thresholds using experimentally determined parameters including nonlinear absorption coefficients and temperature dependent linear absorption. The damage threshold for a single-layer Al{sub 2}O{sub 3} anti-reflective coating on Ge was 55% or 35% lower than the uncoated threshold for picosecond or nanosecond pulses, respectively.

36 MATERIALS SCIENCE↗

Increase in the optical damage threshold of a ZnSe-passivated front mirror of a laser diode

The operation of single-mode diode lasers with a front mirror passivated by ZnSe films of different thicknesses is studied in the pulsed regime (pulse duration {tau} = 0.2 - 10 {mu}s). It is found that in the case of short (0.2 {mu}s) pulses, the catastrophic optical damage threshold grows almost linearly as the film thickness on the front mirror increases from 0.1 to 0.5 {mu}m. It is shown that lasers with mirrors passivated by 'thick' (0.4 - 0.6 {mu}m) ZnSe films can operate stably in the case of 'long' (2 - 10 {mu}s) pulses. It is assumed that in this pulsed regime the ZnSe film provides an additional heat removal from the hot zone of the front mirror, and consequently increases the optical damage threshold. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization

Two-photon polymerization (TPP) is a laser writing process that enables fabrication of millimeter scale three-dimensional (3D) structures with submicron features. In TPP, writing is achieved via nonlinear two-photon absorption that occurs at high laser intensities. Thus, it is essential to carefully select the incident power to prevent laser damage during polymerization. Currently, the feasible range of laser power is identified by writing small test patterns at varying power levels. Here in this paper, we demonstrate that the results of these tests cannot be generalized, because the damage threshold power depends on the proximity of features and reduces by as much as 47% for overlapping features. We have identified that this reduction occurs primarily due to an increase in the single-photon absorptivity of the resin after curing. We have captured the damage from proximity effects via X-ray 3D computed tomography (CT) images of a non-homogenous part that has varying feature density. Part damage manifests as internal spherical voids that arise due to boiling of the resist. We have empirically quantified this proximity effect by identifying the damage threshold power at different writing speeds and feature overlap spacings. In addition, we present a first-order analytical model that captures the scaling of this proximity effect. Based on this model and the experiments, we have identified that the proximity effect is more significant at high writing speeds; therefore, it adversely affects the scalability of manufacturing. The scaling laws and the empirical data generated here can be used to select the appropriate TPP writing parameters.

36 MATERIALS SCIENCE↗

Experimental study on GaP surface damage threshold induced by a high repetition rate femtosecond laser

The surface damage threshold of undoped bulk <110> GaP induced by a high repetition rate femtosecond pulse at 1040 nm with a duration of 61 fs was studied. The threshold value was obtained by a linear fit of the incident single pulse fluence and was confirmed with a breakdown test around the threshold level. The result will be useful in high intensity, high repetition rate laser applications and ultrafast processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring single-shot, picosecond optical damage threshold in Ge, Si, and sapphire with a 5.1-μm laser

Optical photonic structures driven by picosecond, GW-class lasers are emerging as promising novel sources of electron beams and high quality X-rays. Due to quadratic dependence on wavelength of the laser ponderomotive potential, the performance of such sources scales very favorably towards longer drive laser wavelengths. However, to take full advantage of photonic structures at mid-IR spectral region, it is important to determine optical breakdown limits of common optical materials. To this end, an experimental study was carried out at a wavelength of 5 µm, using a frequency-doubled CO 2 laser source, with 5 ps pulse length. Single-shot optical breakdowns were detected and characterized at different laser intensities, and damage threshold values of 0.2, 0.3, and 7.0 J/cm 2 , were established for Ge, Si, and sapphire, respectively. As a result, the measured damage threshold values were stable and repeatable within individual data sets, and across varying experimental conditions.

43 PARTICLE ACCELERATORS↗

A study on crystalline perfection, optical, dielectric, mechanical, laser damage threshold and NLO properties of glycine added potassium dihydrogen phosphate single crystals

Single crystals of glycine doped potassium dihydrogen phosphate have been grown by slow evaporation solution technique, slow cooling along with seed rotation and Sankaranaryanan-Ramasamy method. The size of the grown crystal in slow cooling method was 35x25x20 mm{sup 3} and in SR method it was 20 mm in diameter and 110 mm in length. The grown crystals were characterized by HRXRD, UV-Visible, dielectric, Vickers microhardness, laser damage threshold and SHG studies. The crystalline perfection of the grown crystals has been analyzed by high resolution X-ray diffraction. The transmittance of the grown crystals is 66%, 70%, and 77% respectively and all the crystals have good transparency in the entire visible region. The crystal grown by SR method glycine added KDP has much higher hardness value than other method grown crystals. Higher laser damage threshold was observed in SR method grown glycine added KDP crystal compared to SR method grown pure KDP crystal. The second harmonic generation efficiency of the glycine doped KDP is increased compared to pure KDP.

36 MATERIALS SCIENCE↗

Radiation damage to amorphous carbon thin films irradiated by multiple 46.9 nm laser shots below the single-shot damage threshold

High-surface-quality amorphous carbon (a-C) optical coatings with a thickness of 45 nm, deposited by magnetron sputtering on a silicon substrate, were irradiated by the focused beam of capillary-discharge Ne-like Ar extreme ultraviolet laser (CDL=capillary-discharge laser; XUV=extreme ultraviolet, i.e., wavelengths below 100 nm). The laser wavelength and pulse duration were 46.9 nm and 1.7 ns, respectively. The laser beam was focused onto the sample surface by a spherical Sc/Si multilayer mirror with a total reflectivity of about 30%. The laser pulse energy was varied from 0.4 to 40 muJ on the sample surface. The irradiation was carried out at five fluence levels between 0.1 and 10 J/cm{sup 2}, accumulating five different series of shots, i.e., 1, 5, 10, 20, and 40. The damage to the a-C thin layer was investigated by atomic force microscopy (AFM) and Nomarski differential interference contrast (DIC) optical microscopy. The dependence of the single-shot-damaged area on pulse energy makes it possible to determine a beam spot diameter in the focus. Its value was found to be equal to 23.3+-3.0 mum using AFM data, assuming the beam to have a Gaussian profile. Such a plot can also be used for a determination of single-shot damage threshold in a-C. A single-shot threshold value of 1.1 J/cm{sup 2} was found. Investigating the consequences of the multiple-shot exposure, it has been found that an accumulation of 10, 20, and 40 shots at a fluence of 0.5 J/cm{sup 2}, i.e., below the single-shot damage threshold, causes irreversible changes of thin a-C layers, which can be registered by both the AFM and the DIC microscopy. In the center of the damaged area, AFM shows a-C removal to a maximum depth of 0.3, 1.2, and 1.5 nm for 10-, 20- and 40-shot exposure, respectively. Raman microprobe analysis does not indicate any change in the structure of the remaining a-C material. The erosive behavior reported here contrasts with the material expansion observed earlier [L. Juha et al., Proc. SPIE 5917, 91 (2005)] on an a-C sample irradiated by a large number of femtosecond pulses of XUV high-order harmonics.

36 MATERIALS SCIENCE↗

Thickness effect on laser-induced-damage threshold of indium-tin oxide films at 1064 nm

Laser-induced-damage characteristics of commercial indium-tin oxide (ITO) films deposited by DC magnetron sputtering deposition on K9 glass substrates as a function of the film thickness have been studied at 1064 nm with a 10 ns laser pulse in the 1-on-1 mode, and the various mechanisms for thickness effect on laser-induced-damage threshold (LIDT) of the film have been discussed in detail. It is observed that laser-damage-resistance of ITO film shows dramatic thickness effect with the LIDT of the 50-nm ITO film 7.6 times as large as the value of 300 nm film, and the effect of depressed carrier density by decreasing the film thickness is demonstrated to be the primary reason. Our experiment findings indicate that searching transparent conductive oxide (TCO) film with low carrier density and high carrier mobility is an efficient technique to improve the laser-damage-resistance of TCO films based on maintaining their well electric conductivity.

36 MATERIALS SCIENCE↗

Optical Damage Threshold of Silicon for Ultrafast Infrared Pulses

We present measurements of the optical damage threshold of crystalline silicon in air for ultrafast pulses in the near infrared. The wavelengths tested span a range from the telecommunications band at 1550 nm, extending to 2260 nm. We discuss the motivation for the measurements and give theoretical context. We then describe the experimental setup, diagnostics, and procedure. The results show a breakdown threshold of 0.2J/cm{sup 2} at 1550 nm and 1.06 ps FWHM pulse duration, and a weak dependence on wavelength.

36 MATERIALS SCIENCE↗

The Laser Damage Threshold for Materials and the Relation Between Solid-Melt and Melt-Vapor Interface Velocities

Numerous experiments have demonstrated and analytic theories have predicted that there is a threshold for pulsed laser ablation of a wide range of materials. Optical surface damage threshold is a very complex and important application of high-power lasers. Optical damage may also be considered to be the initial phase of laser ablation. In this work it was determined the time required and the threshold energy of a layer of thickness to heat up. We used the Finite Difference method to simulate the process of laser-target interaction in three cases. Namely, the case before melting begins using a continuous wave (c.w) laser source and a pulsed laser source, the case after the first change of state (from solid to melt), and the case after the second change of state (from melt to vapor). And also study the relation between the solid-melt and melt-vapor interface velocities to have a commonsense of the laser ablation process.

36 MATERIALS SCIENCE↗