Search NASA⌕ Search

SEARCH · Search NASA

Results for “deformation twin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Mechanism of slip and twinning

The objectives are to: (1) demonstrate the mechanisms of deformation in body centered cubic (BCC), face centered cubic (FCC), and hexagonal close-packed (HCP)-structure metals and alloys and in some ceramics as well; (2) examine the deformed microstructures (slip lines and twin boundaries) in different grains of metallic and ceramic specimens; and (3) study visually the deformed macrostructure (slip and twin bands) of metals and alloys. Some of the topics covered include: deformation behavior of materials, mechanisms of plastic deformation, slip bands, twin bands, ductile failure, intergranular fracture, shear failure, slip planes, crystal deformation, and dislocations in ceramics.

Rastani, Mansur↗

Detrital Shocked Zircon Provides First Radiometric Age Constraint of <1472 Ma for the Santa Fe Impact Structure, New Mexico, USA

Impact structures are prone to erosion, burial and tectonic deformation. The Santa Fe impact structure in New Mexico contains shatter cones and shocked quartz, but is highly tectonized and eroded; estimates of the impact age (1200-300 Ma) and size (6-13 km) are poorly constrained. Here we report the first occurrence of shock-twinned zircon identified both in modern sediments and bedrock at the Santa Fe impact structure. Zircon {112} twin lamellae are considered diagnostic evidence of shock deformation and have been identified at several impact structures including Vredefort, Sudbury, Ries, Rock Elm, and in lunar impact breccia. A total of 6619 grains from fifteen sediment samples and two rock samples were surveyed; seven shocked grains were identified (7/6619 = 0.1%). One shocked zircon was identified in a biotite schist shatter cone. Five of seven shocked zircon grains were EBSD mapped; three were analyzed with multiple SIMS spots. EBSD mapping revealed {112} deformation twin lamellae in each of the five zircon grains. U-Pb geochronology for three of the shocked zircon grains yield crystallization ages from 1715+/-22 to 1472+/-35 Ma. LA-ICPMS U-Th-Pb analysis of detrital zircon grains from five samples yielded Paleoproterozoic (1800-1600 Ma) and Mesoproterozoic (1500-1300 Ma) ages. We reveal the first confirmed shocked zircon at the Santa Fe structure. Zircon is the third shocked mineral identified at this site, in addition to xenotime and quartz]; the {112} twin lamellae indicate that exposed bedrock may have experienced shock pressures up to ~20 GPa. The 1472+/-35 Ma age determined from a shock-twinned zircon is the first reliable maximum impact age constraint based on analysis of shocked material and extends the window for the Santa Fe impact event into the Mesoproterozoic.

Montalvo, Pedro E.↗

Effects of Cr and Nb Alloying Additions on High Temperature Creep Deformation of Ni-Based Superalloys

Micro-twinning is the major creep deformation mechanism in Ni-based superalloys at temperatures above 700 C°. Recent experiments suggest that superlattice stacking faults in phase may serve as the precursors to twin formation. Segregation of alloying elements to these precursors may have a significant effect on formation and extension of micro-twins. Using atomistic modeling we investigate and explain the effects of Cr and Nb alloying additions on these processes. We consider the experimentally obtained creep curves for several Ni-based superalloys with different elemental compositions and relate the observed trends to the simulation results presented in this study. Our results help to rationalize the experimentally observed puzzling effects of elemental composition of the alloy on creep resistance.

Ni-based superalloys↗

Effects of Cr and Nb alloying additions on high temperature creep deformation of Ni-based superalloys

Micro-twinning is the major creep deformation mechanism in Ni-based superalloys at temperatures above 700 °C. Recent experiments suggest that superlattice stacking faults y ' in phase may serve as the precursors to twin formation. Segregation of alloying elements to these precursors may have a significant effect on formation and extension of micro-twins. Using atomistic modeling we investigate and explain the effects of Cr and Nb alloying additions on these processes. We consider the experimentally obtained creep curves for several Ni-based superalloys with different elemental compositions and relate the observed trends to the simulation results presented in this study. Our results help to rationalize the experimentally observed puzzling effects of elemental composition of the alloy on creep resistance.

Valery V. Borovikov↗

Twin nucleation and growth mechanism in Ni-based superalloys

While micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 C, many aspects of twin nucleation and growth remain unexplored. Kolbe mechanism for micro-twinning, based on thermally activated reordering, is probably the only concept currently widely accepted by the scientific community. We propose a qualitatively different mechanism for nucleation and growth of twins. The mechanism can be briefly described as follows. Penetration of a gamma prime precipitate by two 1/2(110) edge dislocations travelling on adjacent {111} glide planes triggers nucleation (at the interface of the precipitate and the matrix) and emission of Shockley partial of screw character on the glide plane of the edge dislocation, which entered the precipitate first (generating trailing high-energy anti-phase boundary (APB)). Propagation of this Shockley partial into the precipitate converts the APB into super intrinsic stacking fault (SISF). The recurring arrival of additional edge dislocations on the glide planes adjacent to the configuration described above leads to formation of super extrinsic stacking fault SESF, subsequent micro-twin formation, and growth of the twinned region. We demonstrate the proposed mechanism via molecular dynamics simulations.

Ni-superalloys↗

Twin nucleation and growth mechanism in Ni-based superalloys

While micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 C, many aspects of twin nucleation and growth remain unexplored. Kolbe mechanism for micro-twinning, based on thermally activated reordering, is probably the only concept currently widely accepted by the scientific community. We propose a qualitatively different mechanism for nucleation and growth of twins. The mechanism can be briefly described as follows. Penetration of a   precipitate by two 1/2(110) edge dislocations travelling on adjacent {111} glide planes triggers nucleation (at the interface of the precipitate and the matrix) and emission of Shockley partial of screw character on the glide plane of the edge dislocation, which entered the precipitate first (generating trailing high-energy anti-phase boundary (APB)). Propagation of this Shockley partial into the precipitate converts the APB into super intrinsic stacking fault (SISF). The recurring arrival of additional edge dislocations on the glide planes adjacent to the configuration described above leads to formation of super extrinsic stacking fault SESF, subsequent micro-twin formation, and growth of the twinned region. We demonstrate the proposed mechanism via molecular dynamics simulations.

Ni-based superalloys↗

Effect of Alloying Additions on Twinning in Ni-Based Superalloys

Micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 C. We use atomistic simulations to study two mechanisms of twin nucleation and growth that are characterized by qualitatively different rate limiting processes. In case of the mechanism proposed by Kolbe, the rate limiting process is diffusion-mediated atomic reshuffling. In case of the other mechanism, we proposed recently, the rate limiting process is nucleation of Shockley partial dislocation. We demonstrate the effects of alloying additions on functionality of these mechanisms.

Ni-based superalloys↗

Effects of Alloying Elements on Twinning in Ni-Based Superalloys

Micro-twinning is the major creep deformation mechanism in Ni-based superalloys at temperatures above 700 C. Recent experiments suggest that superlattice stacking faults in   phase may serve as the precursors to twin formation. Segregation of alloying elements to these precursors may have a significant effect on formation and extension of micro-twins. Using atomistic modeling we investigate and explain the effects of Cr and Nb alloying additions on these processes. Our results help to rationalize the experimentally observed puzzling effects of elemental composition of the alloy on creep resistance.

Ni-based superalloys↗

Shock metamorphism and petrography of the Shergotty achondrite

The shock history of the Shergotty meteorite has been evaluated by analyzing the observable shock effects. In addition, the results of petrographic and mineralogical analyses of new Shergotty subsamples are presented. The overall modal composition of these subsamples is similar to that of the other Shergotty samples, except for the rather high whitlockite content. The shock effects observed in the mineral constituents include mosaicism, deformation bands, planar fractures, and mechanical twin lamellae in clinopyroxene; isotropization of plagioclase with very rare remnants of birefringence; and planar deformation structures, mosaicism, and strongly reduced birefringence in quartz. Other shock effects include mechanical twinning of ilmenite, and localized in situ melting of neighboring minerals at the contact of low and high density phases. The observed shock effects could be explained by a single shock event.

Stoeffler, D.↗

Electrical, structural and chemical characterization of Si sheet material

Web Dendritic Si ribbons are deformed under a well-defined four point bending stress. Since the mechanical properties of Si are known to depend on the 0 content of the material, 0 measurements using Fourier Transform Infrared Spectroscopy were done to determine a proper control sample of non-defected single crystal Si. Four point bending revealed a unique two step bending behavior for the Web Si ribbons. An initial theory for this behavior involves the interaction of the dislocations generated by the deformation with the central twin planes of the ribbons. Measurements showed a uniformly high 0 content for the Web Si ribbons, approximately 10 to the 18th power atoms/cu.cm. The Web samples had a much broader absorption peak at 9 microns than is usually seen for well-annealed single crystal Si. This broadening is thought to be related to stress in the Web Si ribbons. Two samples containing a known amount of residual stress support this hypothesis. Also, a shoulder on the infrared absorption peak associated with interstitial 0 in Si appears in the transmission vs. wavenumber plots for some of the Web samples. This shoulder has been associated with 0-vacancy complexes or with 0 at dislocations. The O content and configuration do not seem to correlate with the growth configuration of the Web Si ribbon.

Ast, D. G.↗

A simplified method for determining the number of independent slip systems in crystals

A novel method for determining the number of independent slip systems for any family or a combination of families of slip systems is proposed, which is more direct than previous approaches. This technique makes it possible to easily determine, from the known operative slip systems, if the material is slip-system-deficient. The method also makes it possible to determine if twinning may contribute additional deformation modes.

Cotton, J. D.↗

Effect of Alloying Additions on Twinning in Ni-based Superalloys

Micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 °C. We use atomistic simulations to study two mechanisms of twin nucleation and growth that are characterized by qualitatively different rate limiting processes. In case of the mechanism proposed by Kolbe, the rate limiting process is diffusion-mediated atomic reshuffling. In case of the other mechanism, we proposed recently, the rate limiting process is nucleation of Shockley partial dislocation. We demonstrate the effects of alloying additions on functionality of these mechanisms.

Valery V Borovikov↗

Effects of Alloying Elements on Twinning in Ni-Based Superalloys

Micro-twinning is the major creep deformation mechanism in Ni-based superalloys at temperatures above 700 °C. Recent experiments suggest that superlattice stacking faults in y' phase may serve as the precursors to twin formation. Segregation of alloying elements to these precursors may have a significant effect on formation and extension of micro-twins. Using atomistic modeling we investigate and explain the effects of Nb and Cr alloying additions on these processes. The simulation shows that Nb increases the creep resistance which is mostly associated with impeding the reordering of the high energy double complex stacking fault. Cr, on the other hand, promotes twin growth, degrading the high temperature creep properties. These results can help to understand the effects of elemental composition of the alloy on creep resistance.

Ni-based superalloys↗

Effects of alloying elements on twinning in Ni-based superalloys

Micro-twinning is the major creep deformation mechanism in Ni-based superalloys at temperatures above 700 °C. Recent experiments suggest that superlattice stacking faults in y' phase may serve as the precursors to twin formation. Segregation of alloying elements to these precursors may have a significant effect on formation and extension of micro-twins. Using atomistic modeling we investigate and explain the effects of Nb and Cr alloying additions on these processes. The simulation shows that Nb increases the creep resistance which is mostly associated with impeding the reordering of the high energy double complex stacking fault. Cr, on the other hand, promotes twin growth, degrading the high temperature creep properties. These results can help to understand the effects of elemental composition of the alloy on creep resistance.

Ni-based superalloys↗

Mechanical twinning of monazite expels radiogenic Pb

Mechanical twins form by the simple shear of the crystal lattice during deformation In order to test the potential of narrow twins in monazite to record the timing of their formation, a ~1,700 Ma monazite grain deformed at ~980 Ma was investigated by electron backscattered diffraction (EBSD), transmission electron microscopy (TEM) and atom probe tomography (APT). APT 208Pb/232Th ages indicate that the twin was entirely reset by radiogenic Pb-loss during its formation at conditions far below the monazite closure temperature. The results are consistent with a model where Pb is liberated during rupture of REE-O bonds in the large REEO9 polyhedra during twinning. Liberated Pb is likely to migrate along fast diffusion pathways such as crystal defects. The combination of a quantitative microstructural investigation and nanogeochronology provides a new approach for understanding the history of accessory phases.

monazite↗

Novel Shock Microstructures in Accessory Minerals from the Haughton Dome, Devon Island, Nunavut, Canada

The 23 km-diameter, ca. 24 Ma Haughton Dome impact structure in the Canadian Arctic on Devon Island, Nunavut (89deg41′W, 75deg22′N) occurred within a two layered target composed of a shallowly-dipping ~1700 m thick succession of Paleozoic limestones and evaporates overlying ca.1.9 Ga high grade gneisses [1, 2]. Within the structure a well preserved impact melt bearing breccia unit contains a variety of shocked clasts from the pre-impact sediments and basement gneisses [3]. Due to their high level of preservation a variety of studies have been undertaken on the clast population of the melt bearing breccia, including characterization of shock within the accessory minerals of the basement lithologies [4, 5]. This study presents high resolution electron backscatter diffraction (EBSD) microstructural data for zircon and monazite from historic samples of the basement gneiss, in which bulk shock pressures have been previously constrained based on major phases [4, 6]. Shocked zircon and monazite grains have been investigated from shock stage 1b (sample 72110), 2 (7273) and 3 (7192, Dig-9) [4, 6]. At lower shock levels zircon displays planar microstructures consistent with mechanical shock {112} twin formation [7] and deviatoric transformation to the high pressure polymorph reidite [8]. Zircon grains from shock stage three show a more chaotic microstructure with multiple orientations of tightly spaced sets of reidite that are variably recrystallized to zircon neoblasts. Monazite from lower shock stages contains a number of mechanical twin orientations that are indicative of shock deformation [9]. At higher shock pressures a lath like structure of interlocking twin orientations has been identified. This microstructure is suggestive of a reversion transformation from a high pressure polymorph [10] and is the first evidence for the transformation of monazite during shock.

Erickson, Timmons M.↗

Impact-Induced Chondrule Deformation and Aqueous Alteration of CM2 Murchison

Deformed chondrules in CM2 Murchison have been found to define a prominent foliation [1,2] and lineation [3] in 3D using X-ray computed tomography (XCT). It has been hypothesized that chondrules in foliated chondrites deform by "squeezing" into surrounding pore space [4,5], a process that also likely removes primary porosity [6]. However, shock stage classification based on olivine extinction in Murchison is consistently low (S1-S2) [4-5,7] implying that significant intracrystalline plastic deformation of olivine has not occurred. One objective of our study is therefore to determine the microstructural mechanisms and phases that are accommodating the impact stress and resulting in relative displacements within the chondrules. Another question regarding impact deformation in Murchison is whether it facilitated aqueous alteration as has been proposed for the CMs which generally show a positive correlation between degree of alteration and petrofabric strength [7,2]. As pointed out by [2], CM Murchison represents a unique counterpoint to this correlation: it has a strong petrofabric but a relatively low degree of aqueous alteration. However, Murchison may not represent an inconsistency to the proposed causal relationship between impact and alteration, if it can be established that the incipient aqueous alteration post-dated chondrule deformation. Methods: Two thin sections from Murchison sample USNM 5487 were cut approximately perpendicular to the foliation and parallel to lineation determined by XCT [1,3] and one section was additionally polished for EBSD. Using a combination of optical petrography, SEM, EDS, and EBSD several chondrules were characterized in detail to: determine phases, find microstructures indicative of strain, document the geometric relationships between grain-scale microstructures and the foliation and lineation direction, and look for textural relationships of alteration minerals (tochilinite and Mg-Fe serpentine) that indicate timing of their formation relative to deformation event(s). Preliminary Results: Deformed chondrules are dominated by forsterite and clinoenstatite with lesser amounts of Fe-Mg serpentine, sulfides, and low calcium pyroxene. Olivine grains are commonly fractured but generally show sharp optical extinction. The pyroxene, in contrast, is not only fractured but also often displays undulose extinction. In addition, the clinoenstatite is frequently twinned but it is unclear whether the twins are the result of mechanical deformation or inversion from protoenstatite [8]. EBSD work is currently ongoing to determine if areas of higher crystallographic strain can be imaged and mapped, and to determine the pyroxene twin orientations. In regards to alteration, we have found evidence for post-deformation formation of tochilinite and Mg-Fe serpentine indicating that aqueous alteration has indeed post-dated the deformation of the chondrules.

Hanna, R. D.↗