Search NASA⌕ Search

SEARCH · Search NASA

Results for “design principles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Design principles of heterointerfacial redox chemistry for highly reversible lithium metal anode

High electrochemical reversibility is required for the application of high-energy-density lithium (Li) metal batteries; however, inactive Li formation and SEI (solid electrolyte interface)-instability-induced electrolyte consumption cause low Coulombic efficiency (CE). The prior interfacial chemical designs in terms of alloying kinetics have been used to enhance the CE of Li metal anode; however, the role of its redox chemistry at heterointerfaces remains a mystery. Herein, the relationship between heterointerfacial redox chemistry and electrochemical transformation reversibility is investigated. It is demonstrated that the lower redox potential at heterointerface contributes to higher CE, and this enhancement in CE is primarily due to the regulation of redox chemistry to Li deposition behavior rather than the formation of SEI films. Low oxidation potential facilitates the formation of the surface with the highly electrochemical binding feature after Li stripping, and low reduction potential can maintain binding ability well during subsequent Li plating, both of which homogenize Li deposition and thus optimize CE. In particular, Mg hetero-metal with ultra-low redox potential enables Li metal anode with significantly improved CE (99.6%) and stable cycle life for 700 cycles at 3.0 mA cm -2 . This work provides insight into the heterointerfacial design principle of next-generation negative electrodes for highly reversible metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Design principles of tandem cascade photoelectrochemical devices

Cascade photoelectrocatalysis (PEC) is a possible method to improve the selectivity of solar-driven CO 2 reduction (CO 2 R). This concept can be realized by coupling different CO 2 R catalysts to different subcells in a multijunction photovoltaic (PV) stack. Efficient implementation will require careful tuning of the photocurrents and design of the photovoltages provided by the subcells to the CO 2 R catalysts in such a way as to facilitate the target reaction. Here, we outline the design principles of the tandem PEC approach using two-step conversion of CO 2 to ethylene in aqueous electrolyte, via a CO intermediate, as a model system. To perform this reaction, the first coupled PV-catalyst component should provide 4 electrons to reduce 2 molecules of CO 2 to CO; the second component should provide 8 electrons to reduce 2 CO molecules to C 2 H 4 . Based on known CO 2 R catalysts, the overpotential required to produce CO can be less than that required to reduce it to ethylene, creating the opportunity for improved efficiency. Cascade PEC can be realized in a three-terminal tandem (3TT) configuration using III–V-semiconductor based subcells coupled to Au (produces CO intermediate) and Cu (converts CO to ethylene). The current to each catalyst can be controlled by the area of the subcell exposed to the electrolyte, and the photovoltage is determined by the materials selected and device configuration. Operating conditions are found by simulating the coupled system using the open-source circuit simulator SPICE (Simulation Program with Integrated Circuits Emphasis). We identify conditions under which a 3TT configuration can have a higher solar to chemical conversion efficiency compared to a two-terminal two-junction tandem (2T 2J) with the same absorbers and a Cu catalyst only. We also show that 3TT PEC devices can be less sensitive to variations in catalyst activity compared to 2T devices. Lastly, we discuss the applications of cascade PEC to CO 2 reduction, using different intermediates, and to other chemical networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Design Principles for Using Amphiphilic Polymers To Create Microporous Water

Aqueous dispersions of microporous nanocrystals with dry, gas-accessible pores—referred to as “microporous water”—enable high densities of gas molecules to be transported through water. For many applications of microporous water, generalizable strategies are required to functionalize the external surface of microporous particles to control their dispersibility, stability, and interactions with other solution-phase components—including catalysts, proteins, and cells—while retaining as much of their internal pore volume as possible. Here, in this work, we establish design principles for the noncovalent surface functionalization of hydrophobic metal–organic frameworks with amphiphilic polymers that render the particles dispersible in water and enhance their hydrolytic stability. Specifically, we show that block co-polymers with persistence lengths that exceed the micropore aperture size of zeolitic imidazolate frameworks (ZIFs) can dramatically enhance ZIF particle dispersibility and stability while preserving porosity and >80% of the theoretical O 2 carrying capacity. Moreover, enhancements in hydrolytic stability are greatest when the polymer can form strong bonds to exposed metal sites on the external particle surface. More broadly, our insights provide guidelines for controlling the interface between polymers and metal–organic framework particles in aqueous environments to augment the properties of microporous water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Design principles for self-forming interfaces enabling stable lithium-metal anodes

Significance It is possible to nearly double the energy density of existing lithium-ion batteries by using lithium metal anodes. However, it has been known for decades that the lithium dendrites and mossy lithium formed during charging (electrodeposition) limit the cycle life of the batteries. It is important to change the growth behavior of lithium metal, which is closely related to the properties of the solid–electrolyte interface (SEI) formed via spontaneous reactions between the lithium metal and the electrolyte. In this experimental-modeling integrated study, we reveal the design principles of the SEI that facilitates the dendrite-free and dense deposition of lithium and demonstrate one of the best cycling performances of lithium metal anode to date under practically relevant conditions.

25 ENERGY STORAGE↗
DOE OSTI2021

Holistic design principles for flow batteries: Cation dependent membrane resistance and active species solubility

Cation dependent resistance of a commercial cation exchange membrane, Nafion™ 212, as well as the solubility of select active materials are investigated, demonstrating practical consequences of cation choice on redox flow battery (RFB) performance. The conductivity of alkali and methyl- or -alcohol substituted ammonium cations through pretreated Nafion™ 212 reveal that cation size is the dominant factor affecting ionic transport. Among the alkali series the resistance increases with larger ionic radii and similarly, with increasing steric bulk through substitution on ammonia. The solubility of ferrocyanide, a commonly used redox flow battery posolyte (or catholyte), as well as iron, cobalt, and chromium metal-organic compounds are determined for the same series of cations. Full cells are assembled using various cation mixtures and membrane pre-treatments to demonstrate practical effects of each variable. Here, we highlight the need to carefully select the correct cations for efficient electrolyte design, since certain cations may lead to high conductivity but low solubility, or vice versa, and provide design principles for RFBs using Nafion™ 212.

25 ENERGY STORAGE↗
DOE OSTI2022

Generalized design principles for hydrodynamic electron transport in anisotropic metals

Interactions of charge carriers with lattice vibrations, or phonons, play a critical role in unconventional electronic transport of metals and semimetals. Recent observations of phonon-mediated collective electron flow in bulk semimetals, termed electron hydrodynamics, present new opportunities in the search for strong electron-electron interactions in high carrier density materials. Here we present the general transport signatures of such a second-order scattering mechanism, along with analytical limits at the Eliashberg level of theory. We study electronic transport, using ab initio calculations, in finite-size channels of semimetallic ZrSiS and TaAs 2 with and without topological band crossings, respectively. The order of magnitude separation between momentum-relaxing and momentum-conserving scattering length scales across a wide temperature range make both of them promising candidates for further experimental observation of electron hydrodynamics. More generally, our calculations suggest that the hydrodynamic transport regime does not, to first order, rely on the topological nature of the bands. Finally, we discuss general design principles guiding future search for hydrodynamic candidates, based on the analytical formulation and our ab initio predictions. Further, we find that systems with strong electron-phonon interactions, reduced electronic phase space, and suppressed phonon-phonon scattering at temperatures of interest are likely to feature hydrodynamic electron transport. We predict that layered and/or anisotropic semimetals composed of half-filled d shells and light group V/VI elements with lower crystal symmetry are promising candidates to observe hydrodynamic phenomena in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Design principles for energy transfer in the photosystem II supercomplex from kinetic transition networks

Photosystem II (PSII) has the unique ability to perform water-splitting. With light-harvesting complexes, it forms the PSII supercomplex (PSII-SC) which is a functional unit that can perform efficient energy conversion, as well as photoprotection, allowing photosynthetic organisms to adapt to the naturally fluctuating sunlight intensity. Achieving these functions requires a collaborative energy transfer network between all subunits of the PSII-SC. In this work, we perform kinetic analyses and characterise the energy landscape of the PSII-SC with a structure-based energy transfer model. With first passage time analyses and kinetic Monte Carlo simulations, we are able to map out the overall energy transfer network. We also investigate how energy transfer pathways are affected when individual protein complexes are removed from the network, revealing the functional roles of the subunits of the PSII-SC. In addition, we provide a quantitative description of the flat energy landscape of the PSII-SC. We show that it is a unique landscape that produces multiple kinetically relevant pathways, corresponding to a high pathway entropy. These design principles are crucial for balancing efficient energy conversion and photoprotection.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Molecular Design Principles for Photosystem I-Based Biohybrid Solar Fuel Catalysts

Direct solar-to-chemical conversion offers a compelling route to clean, dispatchable energy. Photosystem I (PSI), an evolutionarily optimized light-driven oxidoreductase, can be repurposed for solar-fuel production by coupling its photochemistry to catalytic interfaces. However, the molecular determinants that govern productive electron transfer to abiotic catalysts remain poorly understood. Here, we present molecular structures of active PSI-Pt nanoparticle (PtNP) biohybrids that reveal how protein architecture controls catalyst access, binding geometry, and photocatalytic efficiency. Removal of stromal subunits exposes the electron transfer chain and enables PtNP binding proximal to the F X cluster, demonstrating that steric occlusion limits access to native acceptor regions in PSI. In contrast, in trimeric PSI, PtNPs bind at multiple sites per monomer, but only a subset are positioned within electron transfer distance of terminal cofactors, resulting in a heterogeneous population of productive and nonproductive configurations. Structural analyses and molecular dynamics simulations define the interface topology, electrostatics, and cofactor-to-nanoparticle distances that govern catalyst binding and electron transfer. These results establish that catalytic inefficiency arises not only from intrinsic electron transfer constraints but also from the distribution of binding geometries imposed by the protein scaffold. Together, these findings provide a molecular framework linking protein structure to biohybrid function and define design principles for engineering PSI-based solar fuel systems and protein-nanomaterial interfaces for light-driven catalysis.

biohybrid↗
DOE OSTI2026

Pursuing Heteroleptic Ligand Design Principles for Photoactive Fe Complexes with Ultrafast X-ray Emission and Variable-Temperature Optical Spectroscopies

Understanding the key parameters that govern the photophysical and photochemical properties of transition metal complexes is essential for the development of efficient photosensitizers for photocatalytic applications. Achieving this objective necessitates clear and detailed investigations of their electronic excited states, for which time-resolved metal Kβ X-ray emission spectroscopy (XES) has proven highly effective. Here, we present a time-resolved Fe Kβ XES study of a heteroleptic Fe(II) polypyridyl carbene complex, [Fe(phen) 2 (C 4 H 10 N 4 )] 2+ (1; phen = 1,10-phenanthroline), utilizing both the valence-to-core and Kβ mainline spectral regions, complemented by variable-temperature transient optical absorption (VT-TA) spectroscopy. Detailed analysis of the time-resolved Kβ XES data, supported by density functional theory (DFT) calculations and an Eyring analysis of the VT-TA data, reveals parallel excited state relaxation dynamics that support an assignment of the long-lived excited state to a triplet metal-centered state. Placing these results in the context of prior studies of heteroleptic Fe(II) polypyridyl cyanide complexes motivated a series of DFT calculations to investigate the effects of ligand structural flexibility and arrangement. These calculations reinforce the experimentally derived conclusion that constraining structural flexibility with multidentate ligands significantly impacts the excited state relaxation dynamics. Furthermore, our study emphasizes that the arrangement of strong field ligands in heteroleptic complexes substantially affects the energy of Jahn–Teller active triplet metal-centered states in low-spin d 6 metal complexes. Together, these findings provide synthetic design principles for extending metal-to-ligand charge transfer excited state lifetimes of heteroleptic Fe complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigation of design principles for metal-binding and conductive protein assemblies

Throughout the lifetime of this initiative, including renewals, we focused on understanding the fundamental principles of protein-protein interface design that enable predictable and modular spatial and kinetic control of multi-component protein self-assembly in 1D, 2D, and 3D, including the interface with inorganic materials, small molecules, and metal ions. We designed individual protein components that bind specific metal ions, including REEs and transport ions across lipid membranes. We created helical 1D filaments of repeating units with programmed periodicity, pitch, and multi-component environmentally responsive self-assembling protein fibers. We showed that these filaments reversibly assemble and disassemble under specific pH conditions and created end-specific caps that independently tune the balance of attachment and detachment rates at each terminus of the filament. Using similar filaments, we succeeded in binding arrays of heme and chlorophyll molecules and assembling patterned helical coatings around carbon nanotubes in efforts to create de novo conductive nanowires. By arraying REE binding sites in a large circular tandem array with a repeat protein-based cyclic oligomer, we created a molecular scaffold for superradiance and paramagnetic quantum sensing. We created a range of one-component and two-component self-assembling 2D arrays and showed that when designed to engage cell receptors, these arrays can control cell behavior from outside the cell signal to inside the cell. We designed helical repeat proteins with variable lengths displaying charged residues in a pattern matched to the cation lattice of mica. achieved a range of ordered states with an epitaxial match to the underlying crystal lattice. We further applied the learned principles of protein-induced biomineralization to design proteins with an interface lattice matching CaCO 3 and guide the formation of specific crystal forms of CaCO 3 from solution, a significant advance toward the global need to manage carbon. In all cases of mineral lattice matching and biomineralization, we followed assembly using molecularly resolved in situ AFM imaging and extracted information about assembly pathways and energetics, applying deep learning to quantify the dynamics of protein self-organization. We developed techniques for using dynamic metal-dependent interfaces on protein nanopores for discriminatively sensing dilute REEs in solution and demonstrated the use of strong metal-binding interfaces to drive nanocage disassembly for conditional nanocompartmentalization applications. This grant supported 11 people, including Asim Bera, Evans Brackenbrough, Andrew Borst, Nikita Hanikel, Timothy Huddy, Emily Joyce, Alex Young-Seug Kang, Ryan Kibler, Joshua Morris Lubner, Harley Pyles, and Shuai Zhang. The research effort culminated in the production of published papers and theses. Electronic Thesis/Dissertation are distributed by ProQuest/UMI Dissertation Publishing and made available on an open access basis through UW Libraries ResearchWorks Service.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Membranes in Solar-Driven Evaporation: Design Principles and Applications

In this study, solar-driven evaporation process brings exciting opportunities to recover clean water and resources in a sustainable way from diverse sources like seawater and wastewater. Separation membranes, as a vital material in many environmental and energy applications, can contribute significantly to this process owing to their structural features. However, the unique roles of membranes in solar evaporator construction and process design are seldom recognized and not summarized yet from scientific principles and application demands, which forms the motivation of this review. Herein, the roles of membranes in different processes based on solar-driven evaporation are focused and the design principles of membrane materials and devices to meet the requirements of these applications are discussed. Fabrication strategies for photothermal membranes are introduced primarily, followed by a discussion on how to design membrane materials, devices, and processes to pursue optimal performance and realize advanced functions accompanied by evaporation. Furthermore, the future of this field is forecast with both challenges and opportunities.

14 SOLAR ENERGY↗
DOE OSTI2025

Design Principles for Resonant Wave Energy Converters: Benchmarking Power Capture and Flow

Control co-design (CCD) in Wave Energy Converters (WECs) integrates the controller, power take-off (PTO), and buoy models during system design to optimize power output. Using the bi-conjugate impedance matching principle, this study models the PTO as a two-port network, revealing impedance matching conditions at the input and output ports as a function of the buoy, PTO, and controller. Here, this study examines the pairing of a flywheel-type pitch resonator PTO within a given buoy constrained by limited space and ballast capacity. The results show that physical constraints imposed by the buoy affect PTO performance. While controller tuning achieves optimal output impedance matching and flywheel inertia is maximized within the buoy's limitations, the PTO's input impedance remains smaller than the complex conjugate of the buoy's intrinsic impedance. This mismatch limits the PTO's ability to generate sufficient reaction torque, particularly outside the resonance frequency, resulting in narrow-band power transfer. The findings emphasize the need for PTO design modifications to improve input power transfer. Pendulum-based PTO mechanisms are proposed as alternatives to couple with multiple buoy motion modes and improve wave-to-wire efficiency while respecting system constraints.

Control Co-Design↗
DOE OSTI2021

Navigating Transition-Metal Chemical Space: Artificial Intelligence for First-Principles Design

Conspectus The variability of chemical bonding in open-shell transition-metal complexes not only motivates their study as functional materials and catalysts but also challenges conventional computational modeling tools. Here, tailoring ligand chemistry can alter preferred spin or oxidation states as well as electronic structure properties and reactivity, creating vast regions of chemical space to explore when designing new materials atom by atom. Although first-principles density functional theory (DFT) remains the workhorse of computational chemistry in mechanism deduction and property prediction, it is of limited use here. DFT is both far too computationally costly for widespread exploration of transition-metal chemical space and also prone to inaccuracies that limit its predictive performance for localized d electrons in transition-metal complexes. These challenges starkly contrast with the well-trodden regions of small-organic-molecule chemical space, where the analytical forms of molecular mechanics force fields and semiempirical theories have for decades accelerated the discovery of new molecules, accurate DFT functional performance has been demonstrated, and gold-standard methods from correlated wavefunction theory can predict experimental results to chemical accuracy. The combined promise of transition-metal chemical space exploration and lack of established tools has mandated a distinct approach. In this Account, we outline the path we charted in exploration of transition-metal chemical space starting from the first machine learning (ML) models (i.e., artificial neural network and kernel ridge regression) and representations for the prediction of open-shell transition-metal complex properties. The distinct importance of the immediate coordination environment of the metal center as well as the lack of low-level methods to accurately predict structural properties in this coordination environment first motivated and then benefited from these ML models and representations. Once developed, the recipe for prediction of geometric, spin state, and redox potential properties was straightforwardly extended to a diverse range of other properties, including in catalysis, computational “feasibility”, and the gas separation properties of periodic metal–organic frameworks. Interpretation of selected features most important for model prediction revealed new ways to encapsulate design rules and confirmed that models were robustly mapping essential structure–property relationships. Encountering the special challenge of ensuring that good model performance could generalize to new discovery targets motivated investigation of how to best carry out model uncertainty quantification. Distance-based approaches, whether in model latent space or in carefully engineered feature space, provided intuitive measures of the domain of applicability. With all of these pieces together, ML can be harnessed as an engine to tackle the large-scale exploration of transition-metal chemical space needed to satisfy multiple objectives using efficient global optimization methods. In practical terms, bringing these artificial intelligence tools to bear on the problems of transition-metal chemical space exploration has resulted in ML-model assessments of large, multimillion compound spaces in minutes and validated new design leads in weeks instead of decades.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Design Principles for the Synthesis of Self-Pillared ZSM-5 Zeolite Nanosheets

The design of next-generation materials for emerging energy and environmental applications heavily relies on empirical approaches to direct nonclassical nucleation and crystal growth pathways, polymorphism, intercrystalline transformations, and seed-assisted growth processes. A long-standing obstacle to nanoporous materials design is the complexity of their crystallization, which hinders the development of predictive models and/or physical descriptors that can guide their synthesis. In this study, we use a combination of state-of-the-art synthesis, characterization, and computational design to prepare hierarchical MFI-type zeolites, which we couple with benchmark catalytic testing to assess structure-property-performance relationships. These hierarchical materials are intergrowths of two commercially relevant zeolite frameworks, MFI and MEL, prepared as self-pillared pentasil (SPP) zeolites through seed-assisted, organic-free syntheses for which little theoretical guidance existed. Here, by comparing a large library of zeolite seeds with different pore sizes, dimensions, and structural composite building units, we determined the relative impact of seed and silica source selection, among other synthesis variables. Combined experimental and computational studies are used to test several hypotheses in literature to rationalize the choice of seed structure and establish a more robust selection criteria for seed-assisted synthesis of zeolites. Specifically, we show that a data-driven approach to develop structural descriptors correlates to new, facile routes to rationally design SPP zeolites, addressing knowledge gaps in the fundamental understanding of (non)classical crystal growth mechanisms that are characteristic of nanoporous aluminosilicates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Machine learning for design principles for single atom catalysts towards electrochemical reactions

Machine learning (ML) integrated density functional theory (DFT) calculations have recently been used to accelerate the design and discovery of heterogeneous catalysts such as single atom catalysts (SACs) through the establishment of deep structure–activity relationships. Here, this review provides recent progress in the ML-aided rational design of heterogeneous catalysts with the focus on SACs in terms of structure–activity relationships, feature importance analysis, high-throughput screening, stability, and metal–support interactions for electrochemistry. Support vector machine (SVM), random forest regression (RFR), and deep neural networks (DNN) along with atomic properties are mainly used for the design of SACs. The ML results have shown that the number of electrons in the d orbital, oxide formation enthalpy, ionization energy, Bader charge, d-band center, and enthalpy of vaporization are mainly the most important parameters for the defining of the structure–activity relationships for electrochemistry. However, the black-box nature of ML techniques occasionally makes a physical interpretation of descriptors, such as the Bader charge, d-band center, and enthalpy of vaporization, non-trivial. At the current stage, ML application is limited by the lack of a large and high-quality database. Future prospects for the development of a large database and a generalized ML algorithm for SAC design are discussed to give insights for further studies in this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Integrable optics design principles for beam halo suppression in accelerator rings at the intensity frontier

RadiaSoft LLC is collaborating with Fermilab to fundamentally advance the field of particle accelerator design, in order to reduce cost and technical risk for next-generation hadron accelerators, and to more rapidly advance the intensity frontier of high energy physics. The Fermilab PI is one of the originators of the theory of integrable nonlinear magnetic lattices. Fermilab is the only laboratory in the world pursuing the experimental verification of the theory. Transferring Fermilab expertise to RadiaSoft LLC will enhance US competitiveness by enabling US industry to engage in the design of future high intensity hadron rings for spallation sources, neutrino sources, muon sources, subcritical nuclear reactors and waste transmutation facilities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Structural and Dynamical Design Principles for Iron-Sulfur Clusters in Sequence Defined Polymers

This integrated synthetic and computational effort uses sequence defined polymers such as peptoids, and triazines, capable of mimicking a flexible protein environment to control the positioning of side chains around redox cofactors. This strategy will allow modulation of redox properties through both direct and indirect mechanisms. To this end the aim is defined to test the underlying hypothesis: that principles and critical functionalities governing the binding and tuning of naturally occurring electron carrier co-factors can be identified and used to predictably design and synthesize maquettes based on non-natural polymers resulting in new modular biomimetic scaffolds for Electron Transfer Materials. This will be achieved through design and synthesis of ligands that can stabilize iron-sulfur clusters and tune the redox potential based on sequence.

36 MATERIALS SCIENCE↗