Search NASA⌕ Search

SEARCH · Search NASA

Results for “detergent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1962

Influence of Tire Tread Pattern and Runway Surface Condition on Braking Friction and Rolling Resistance of a Modern Aircraft Tire

A series of taxiing tests was conducted at the Langley landing­ loads track with both braked and unbraked (freely rolling) single and tandem wheels equipped with 32x8.8 type VII aircraft tires of dif­ferent tread designs to obtain data on tire and braking characteristics during operation on dry and on contaminated concrete and asphalt run­ ways. Contaminants used were water, slush, JP-4 jet fuel, and organic and detergent fire-extinguishing foams. Forward velocities for the tests ranged from approximately 13 to 104 knots. Vertical loads of approximately 9,000 to 22,000 pounds and tire inflation pressures of 85 to 350 pounds per square inch were used. Results indicated that the unbraked tire rolling resistance increased with increasing forward velocity on dry and on contaminated runway surfaces. Peak tire-ground friction coefficients developed during wheel braking decreased rapidly with increasing velocity on contaminated runways but remained relatively unchanged on dry runways as the forward velocity was increased. Dry-runway friction coeffi­cients were found to be relatively insensitive to tire tread pattern. However, the magnitude of the friction coefficients developed by tires on contaminated runways was extremely sensitive to the tire tread pat­ tern used, with circumferential-groove treads developing the highest values of friction coefficient, and smooth and dimple treads the lowest values for the tread patterns and runway conditions investigated.

Horne, Walter B.↗
NASA NTRS1967

Scribable coating for plastic films

Scribable opaque coating for transparent plastic film tape is not affected by aging, vacuum, and moderate temperature extremes. It consists of titanium dioxide, a water-compatible acrylic polymer emulsion, and a detergent. The coating mixture is readily dispersed in water before it is dried.

Clark, R. T.↗
NASA NTRS1971

Inexpensive anti-fog coating for windows

Coating applications include anti-fog protection for deep-sea diving equipment, fire protection helmets, and windows of vehicles used in hazardous environments. Basic coating composition includes liquid detergent, deionized water, and oxygen compatible fire-resistant oil. Composition prevents visor fogging under maximum metabolic load for 5 hours and longer.

Carmin, D. L., Jr.↗
NASA NTRS1972

Development of self extinguishing Durette and/or Nomex fabric

A treatment was developed for Nomex or Durette fabric which renders it self-extinguishing in a 70% oxygen, 30% nitrogen atmosphere at 5 psia. The treatment does not degrade the physical and textile properties of the fabric excessively and does not outgas or have an objectional odor. The treatment is permanent and does not lose its fire protecting qualities after laundering. The treatment utilizes a mixture of formaldehyde, phosphorous acid, and tri-methyl phosphate in methanol. The cloth to be treated is held in a boiling solution of the above reagents for 24 hours, removed, air dried, and then heated to 120 C in a circulating air oven for 90 minutes. The treatment turns Nomex a pale yellow but does not have an appreciable effect on drape or hand. One inch wide strips of treated cloth failed in tension at 192 lbs, while untreated controls broke at 215 lbs. To remove any excess reagents, the cloth is processed in a home laundry through one wash and dry cycle without the use of any detergents. The thermal shrinkage of the treated material is 23% compared to a control of 40% for unwashed Stern Nomex HT 90-40.

Source record↗
NASA NTRS1972

Rare-gas effects on metabolism and inert gas narcosis

The detailed examination is reported of the theory that narcosis results from expansion of the cell membrane under high partial pressures. The research is partially based on the hypothesis that, like oxygen toxicity, the mechanism of metabolic effects of rare gases may be similar at both low and high pressures and are simply more observable at high pressures. Using adult female goats, the parameters measured include oxygen consumption, CO2 production, respiration rate, heart rate, rectal and skin temperatures and the analysis of electroencephalograms and evoked response. Additionally, the specific activity is measured of plasma glucose subsequent to injection of glucose-UL-C-14, intravenous infusion, specific activity of expired CO2, unesterified fatty acid levels and whole blood lactate-to-pyruvate ratios. Also studied were the effects of acetylsalicylic acid, vitamin E and cationic detergents (which alleviate narcosis) upon metabolic changes induced by high pressure narcosis.

Source record↗
NASA NTRS1971

Jet-noise reduction through liquid-base foam injection.

An experimental investigation has been made of the sound-absorbing properties of liquid-base foams and of their ability to reduce jet noise. Protein, detergent, and polymer foaming agents were used in water solutions. A method of foam generation was developed to permit systematic variation of the foam density. The investigation included measurements of sound-absorption coefficents for both plane normal incidence waves and diffuse sound fields. The intrinsic acoustic properties of foam, e.g., the characteristic impedance and the propagation constant, were also determined. The sound emitted by a 1-in.-diam cold nitrogen jet was measured for subsonic (300 m/sec) and supersonic (422 m/sec) jets, with and without foam injection. Noise reductions up to 10 PNdB were measured.

Manson, L.↗
NASA NTRS1973

Evaluation of proposed Skylab and SSP soap products

Three personal hygiene cleansing agents and one laundry detergent (sodium dodecyl benzene sulfonate), which are all candidates for use on long-duration space missions, were evaluated in terms of dermatological effects on human subjects and effects on microbiological species. None of the four materials exhibited adverse dermatological effects from either skin patch tests of two weeks duration or a simulated Skylab personal hygiene regimen of up to four weeks duration. No significant alterations in skin microflora during the use regimen were found. None of the four materials were found to serve as microbiological support media for the species tested, but a species of air-borne mold was observed to grow rapidly in a neutralized aqueous solution. None of the candidate agents was found to be strongly biocidal.

Whitmore, F. C.↗
NASA NTRS1972

Testing to determine the vacuum-ultraviolet degradation rate of thermal control coatings

Samples of S-13G that had been exposed to the salt air environment of Cape Kennedy, Florida were irradiated with simulated solar ultraviolet radiation after various cleaning treatments. In both of the the tests conducted two of the salt air exposed samples were not cleaned, two were lightly cleaned with water and detergent (i.e. rinsed), and two were vigorously scrubbed. Several other white thermal control coatings were also irradiated. The solar absorptance values of these coatings before and as a result of the ultraviolet irradiation are reported for exposure levels up to approximately 2000 ESH.

Gilligan, J. E.↗
NASA NTRS1973

Evaluation of a multifiltration water reclamation subsystem to reclaim domestic clothes wash water

An evaluation has been performed of a multifiltration water reclamation subsystem to determine its capability to recover water from domestic clothes wash water. A total of 32.89 kg (72.5 lb) of clothes were washed during eight wash cycles which used 1.4 lb of detergent, 145 gallons of hot water and 133.9 gallons of cold water. Water recovered at a weighted average process rate of 3.81 gallons per hour met the majority of the 23 requirements established for potable water by the U.S. Public Health Service. Average power consumed during this evaluation was approximately 71 watt-hours per gallon of water recovered. Filter replacement, which was required primarily for the control of micro-organisms in the recovered water averaged 4.86 filters per 100 gallons of wash water processed. The subsystem removed approximately 98 percent and virtually 100 percent of the phosphates and surfactants, respectively, from the wash water.

Hall, J. B., Jr.↗
NASA NTRS1973

Evaluation of proposed Skylab and SSP soap products.

Four candidate cleansing agents evaluated in terms of potential hazards to crew members included two soaps (Neutrogena bar soap and Olive Leaf Liquid), one nonfoaming surfactant (Miranol JEM), and one laundry detergent (sodium dodecylbenzene sulfonate). None of the four exhibited adverse dermatological effects from skin patch tests or supported growth of potentially pathogenic microorganisms. Aqueous solutions of Neutrogena did support a mold species. Neutrogena and Miranol JEM were used in a simulated Skylab personal hygiene regimen with no adverse effects on skin or skin microflora. Based on our results, each of these agents appear to be a promising candidate material for the use intended.

Durfee, R. L.↗
NASA NTRS1973

Additives

The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

Smalheer, C. V.↗
NASA NTRS1975

Toxicologic evaluation of the migration of a plasticizer, DI (2-ethylhexyl) phthalate (DEHP) from vinyl plastics

The intravenous administration of DEHP solubilized by means of a number of different detergents leads to respiratory distress and death in rats. At autopsy the lungs are grossly enlarged, edamatous, and hemorrhagic. Light and electron microscopic evaluation of the lungs indicate engorgement of the interalveolar septa with edema fluid and polymorphonuclear leucocytes, degranulation of the leukocytes, and progessive destruction of the endothelial and epithelial cells. Consistent with the conclusion that solubilized DEHP results in a syndrome of "shock lung" is the associated massive fall in arterial blood pressure and the prevention of the lung pathology by pretreatment with pharmacologic doses of an antiinflammatory steroid, methylprednisolone. Evidence is also presented that suggests that the DEHP inadvertently administered to humans during transfusions is also in a solubilized state in the plasma.

Rubin, R. J.↗
NASA NTRS1977

Wetting agent for stud welding

Easily-formulated detergent solution (aromatic polyglycolether) lowers cost and increases quality of aluminum stud welds made by capacitor-discharge welding.

Green, C. L.↗
NASA NTRS1977

Effects of outdoor exposure on solar cell modules in the ERDA/NASA Lewis Research Center Systems Test Facility

The effects of outdoor exposure were determined by comparing standard I-V data obtained for the as-received modules with similar data obtained after removal from the field and cleaning with detergent solution. All modules measured in this way exhibited nonrecoverable degradation in P sub maximum varying from 4 to 7 percent. One module exposed for 41 days exhibited partial cell discoloration, loss of front surface metallization over the discolored portion, and a decrease in P sub maximum of 7 percent, tentatively attributed to cell damage. Measurements before and after cleaning showed a recoverable degradation due to dirt accumulation. This recoverable loss in power was 11 percent after 245 days in the field for one brand of module, 6 percent after 48 days for another brand, and 4 1/2 percent for the third brand.

Weinberg, I.↗
NASA NTRS1980

Deburring die-castings by wet vibratory plant

A wet vibratory procedure for the removal of burrs from die castings is described. In this process synthetic abrasive chips and detergent solutions are agitated with the work in such a way as to produce a spiral circulatory movement. Details of various forms of vibrator basin and shapes of abrasive are illustrated. The automation of deburring is illustrated through the application of vibrators of spiral design in combination with transport and drying devices.

Loeschbart, H. M.↗