Search NASA⌕ Search

SEARCH · Search NASA

Results for “diamond surface modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

34 records · Page 2

Effect of High-Dose Carbon Implantation on the Phase Composition, Morphology, and Field-Emission Properties of Silicon Crystals

The study of high-dose carbon-ion implantation without post-process annealing reveals significant modification of the morphology, surface-layer phase composition, and field-emission properties of silicon wafers. The effect of the electrical conductivity type on the evolution of the silicon-crystal surface morphology, upon a variation in the irradiation dose, and a high content of diamond-like phases in the region of microprotrusions at the maximum dose regardless of the electrical conductivity type are found. It is demonstrated that the high-dose implantation of carbon in silicon wafers with a pre-structured surface increases the maximum density of field-emission currents by more than two orders of magnitude.

36 MATERIALS SCIENCE↗

Synthesis of flat sticky hydrophobic carbon diamond-like films using atmospheric pressure Ar/CH{sub 4} dielectric barrier discharge

An Ar/CH{sub 4} atmospheric pressure dielectric barrier discharge (AP-DBD) was used to synthesize sticky hydrophobic diamond-like carbon (DLC) films on glass surface. The film is formed with plasma treatment duration shorter than 30 s, and water contact angles larger than 90° together with contact angle hysteresis larger than 10° can be achieved. According to Fourier transform infrared spectroscopy and atomic force microscopy analysis, hydrocarbon functional groups are created on the glass substrate, producing coatings with low surface energy (∼35 mJ m{sup −2}) with no modification of the surface roughness. To infer the plasma processes leading to the formation of low energy DLC surfaces, optical emission spectroscopy was used. From the results, a direct relationship between the CH species present in the plasma and the carbon concentration in the hydrophobic layer was found, which suggests that the CH species are the precursors of DLC film growth. Additionally, the plasma gas temperature was measured to be below 350 K which highlights the suitability of using AP-DBD to treat thermo-sensitive surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near-Edge X-ray Absorption Fine Structure Imaging of Spherical and Flat Counterfaces of Ultrananocrystalline Diamond Tribological Contacts: A Correlation of Surface Chemistry and Friction

A recently installed synchrotron radiation near-edge X-ray absorption fine structure (NEXAFS) full field imaging electron spectrometer was used to spatially resolve the chemical changes of both counterfaces from an ultra-nanocrystalline diamond (UNCD) tribological contact. A silicon flat and Si{sub 3}N{sub 4} sphere were both coated with UNCD, and employed to form two wear tracks on the flat in a linear reciprocating tribometer. The first wear track was produced using a new, unconditioned sphere whose surface was thus conditioned during this first experiment. This led to faster run-in and lower friction when producing a second wear track using the conditioned sphere. The large depth of field of the magnetically guided NEXAFS imaging detector enabled rapid, large area spectromicroscopic imaging of both the spherical and flat surfaces. Laterally resolved NEXAFS data from the tribological contact area revealed that both substrates had an as-grown surface layer that contained a higher fraction of sp{sup 2}-bonded carbon and oxygen which was mechanically removed. Unlike the flat, the film on the sphere showed evidence of having graphitic character, both before and after sliding. These results show that the graphitic character of the sphere is not solely responsible for low friction and short run-in. Rather, conditioning the sphere, likely by removing asperities and passivating dangling bonds, leads to lower friction with less chemical modification of the substrate in subsequent tests. The new NEXAFS imaging spectroscopy detector enabled a more complete understanding of the tribological phenomena by imaging, for the first time, the surface chemistry of the spherical counterface which had been in continual contact during wear track formation.

36 MATERIALS SCIENCE↗

Geobacter sulfurreducens Immobilized Boron-Doped Diamond Electrodes for Uranium(VI) in Water Electrochemical Bioremediation

The proliferation of nuclear science and technology has resulted in an increase in nuclear waste containing uranium, posing significant risks to both human and environmental health. This study proposes the use of Geobacter sulfurreducens (G. sulfurreducens) modified boron-doped diamond electrodes to facilitate the reduction and removal of uranium(VI) from aqueous media. The bioremediation process involves electrochemically immobilizing the bacteria on a boron-doped diamond electrode (BDD). The immobilization process requires applying reduction potentials ranging from −0.40 to −0.70 V (vs Ag/AgCl (3 M NaCl)), with −0.60 V identified as the optimal potential for effective bacterial modification. The uranium source is provided by a 2.0 mM uranyl acetate solution in G. sulfurreducens growth medium. Scanning electron microscopy (SEM) reveals a highly uniform layer of uranium on the electrode surface. Energy-dispersive X-ray fluorescence spectroscopy (EDS) and cyclic voltammetry (CV) studies confirm the presence of uranium in the system. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) successfully elucidate the reduction process of U(VI) to predominantly U(IV) using a bacteria-electrode coupled system. Additionally, a comparison is made with the electrochemical removal of uranyl ions using the electrodeposition method on unmodified BDD. Results demonstrate the presence of three uranium oxide species (UO 2 , UO 3 , and U 3 O 8 ) on the BDD electrode after experimentation, in contrast to the G. sulfurreducens/BDD assembly, which achieves the predominant reduction of UO 2 2+ to UO 2 with a small quantity of UO 3 as the final species. This study highlights the efficient electrochemical removal of uranyl ions from aqueous media at the G. sulfurreducens/BDD interface through chronoamperometry, presenting a promising approach for remediating sites contaminated with radioactive materials. The findings contribute to the exploration of sustainable alternatives for managing nuclear waste, emphasizing the potential of this electrochemical bioremediation strategy.

Bacteria↗

Friction reduction for engine components

The present invention relates to techniques for lowering friction between moving surfaces of, for example, an internal combustion engine. Friction reduction is achieved by adding texture modifications to surfaces that come in contact with each other. Texture modifications that reduce friction in accordance with the present invention include dimples of varying geometries and depths ion the surfaces of components. The present invention also relates to the fabrication technique for applying the textures to the surfaces. In another embodiment, the patterned soft mask is applied onto a large surface (flat or curved including cylindrical rollers surfaces) to be followed by electrochemical etching to imprint the textures onto the component. And, in another embodiment, a diamond-like-carbon (DLC) film may be applied to the turbine component to also reduce friction.

Hsu, Stephen M.↗

Friction reduction for engine components

The present invention relates to techniques for lowering friction between moving surfaces of, for example, an internal combustion engine. Friction reduction is achieved by adding texture modifications to surfaces that come in contact with each other. Texture modifications that reduce friction in accordance with the present invention include dimples of varying geometries and depths ion the surfaces of components. The present invention also relates to the fabrication technique for applying the texture to the surfaces. In another embodiment, the patterned soft mask is applied onto a large surface (flat or curved including cylindrical rollers surfaces) to be followed by electrochemical etching to imprint the textures onto the component And, in another embodiment, a diamond-like-carbon (DLC) film may be applied to the turbine component to also reduce friction.

Hsu, Stephen M.↗

Determining Orientational Structure of Diamondoid Thiols Attached to Silver Using Near Edge X-ray Absorption Fine Structure Spectroscopy

Near-edge x-ray absorption fine structure spectroscopy (NEXAFS) is a powerful tool for determination of molecular orientation in self-assembled monolayers and other surface-attached molecules. A general framework for using NEXAFS to simultaneously determine molecular tilt and twist of rigid molecules attached to surfaces is presented. This framework is applied to self-assembled monolayers of higher diamondoid, hydrocarbon molecules with cubic-diamond-cage structures. Diamondoid monolayers chemisorbed on metal substrates are known to exhibit interesting electronic and surface properties. This work compares molecular orientation in monolayers prepared on silver substrates using two different thiol positional isomers of [121]tetramantane, and thiols derived from two different pentamantane structural isomers, [1212]pentamantane and [1(2,3)4]pentamantane. The observed differences in monolayer structure demonstrate the utility and limitations of NEXAFS spectroscopy and the framework. The results also demonstrate the ability to control diamondoid assembly, in particular the molecular orientational structure, providing a flexible platform for the modification of surface properties with this exciting new class of nanodiamond materials.

36 MATERIALS SCIENCE↗

Anomalous Surface Doping Effect in Semiconductor Nanowires

Surface doping is being used as an effective approach to improve the mechanical, optical, electronic, and magnetic properties of various materials. For example, experimental studies have proven that rare-earth element doping can enhance the optical properties of silicon nanostructures. However, the majority of previous investigations focused on either bulk materials or nanosized spherical crystals. Here we present a comparative study on semiconducting germanium (Ge) nanowires with and without surface doping by using multiple integrated characterization probes, including high resolution scanning/transmission electron microscopy (SEM/TEM), in situ high pressure synchrotron X-ray diffraction (XRD), and Raman spectroscopy. Our results reveal that under pressure the stability of the Ge-I phase (diamond structure) in erbium (Er)-doped Ge nanowires is enhanced compared to undoped Ge nanowires. We also found an increased stability of the Ge-II phase (body centered tetragonal structure) in Er-doped Ge nanowires during decompression. Furthermore, the presence of Er doping elevates the transition kinetics by showing a smaller pressure span needed for a complete Ge-I to Ge-II phase transformation. In contrast, Er doping has a negligible impact on the mechanical properties of Ge nanowires under high pressure, exhibiting a very different mechanical behavior from other foreign element-doped nanostructures. This anomalous doping effect was explained based on surface modification and decoration. Furthermore, these findings are of both fundamental and applied significance, because they not only provide a thorough understanding of the distinct role of surface doping in nanoscale materials, but also yield insight with regard to a given material’s design for favorable properties in semiconductor nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extreme condition nanocarbon formation under air and argon atmospheres during detonation of composition B-3

Novel nanocarbons synthesized by extreme conditions produce products with various chemical and physical properties. Herein through high explosive detonation of Composition B-3 (40% TNT, 60% RDX), pressures and temperatures not classically attainable in laboratory syntheses provide access to interesting carbon allotropes. For example, detonations of Composition B-3 are regularly used to synthesize the now commercially-available nanodiamond (3e5 nm spherical diamond particles) through quenching of the detonation by ice collars at high pressures and temperatures. Detonation conditions of Composition B-3, in this study, were modified by altering the atmosphere (air versus Ar) without quenching, consequently directing nanocarbon formation. X-ray scattering and microscopy elucidate that detonations performed in air produced spherical hollow core-shell nanocarbons, whereas detonations in Ar produced elongated nanocarbons. Although morphology bifurcates, spectroscopy reveals that both major detonation products are comprised of sp 2 hybridized carbon. As expected from air atmosphere detonations, surface functionalization is dominated by CeO bonding. The absence of oxygen in the Ar atmosphere detonations may propagate extended sheets of graphene that either stack together due to electrostatics or fold upon itself. Furthermore, this work demonstrates that modification of the detonation atmosphere provides an alternative route for the production of new and interesting nanocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando tribochemical formation of onion-like-carbon leads to macroscale superlubricity

High contact pressure and shear during relative movement of the sliding interfaces are known to cause structural or chemical modification or complete phase transformation due to the stress induced chemical reaction. Such reactions can manifest either formation of tribofilm or induce enhanced wear at the tribological interface. The nature of these stress-induced reactions at the atomistic level and formation of byproducts at the tribological interface, however, remain poorly understood and pose uncertainties in predicting the tribological performance of the tribosystem. In this paper we demonstrate that, when pristine molybdenum disulfide layers in their two dimensional form are coupled with nanodiamonds, the catalytic interaction of sulfur with the nanodiamond through a stress-induced tribocatalytic reaction under high pressure and shear conditions induces amorphization of nanodiamond and eventually formation of onion like carbon structures (OLCs). This leads to near-zero friction, superlubricity, when sliding against diamond like carbon (DLC) ball in dry nitrogen environment at room temperature. Furthermore, the large size (20-30 nm in diameter) and stiffness of the resulting OLCS allow sustaining high contact pressures, while graphitic lattice provides an incommensurate contact with the DLC surface, thus allowing for successful demonstration of the superlubricity conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic compression effects of H 2 ⁡O in a dynamic diamond anvil cell: Origin of metastable ice VII and its crystal growth kinetics

We report on the structural verification of metastable ice VII solidifying in the phase space of ice VI at 1.80 GPa at room temperature. Using time-resolved (TR) x-ray diffraction and TR ruby luminescence paired with high-speed microphotography utilizing a dynamic diamond anvil cell, an initial compression rate range from 0.12 to 95.84 GPa/s was explored. The solidification pressure of metastable ice VII has a potential sigmoidal dependence upon compression rate with a turnover compression rate of ∼80 GPa/s. The preferred crystallization of ice VII in the stability field of ice VI is due to the increased nucleation rate of ice VII over ice VI at 1.77 GPa that is driven by the surface energy difference between the liquid and solid phases along with the change in Gibbs free energy of solidification. The dynamic pressure-volume–compression behaviors of ice phases (VI and VII) show a lattice stiffening in both phases, especially during the compression loading. It is also found that the compression rate greatly affects the solid-solid phase transition between ice VI and VII but does not affect the liquid-solid transition between water and ice VI as much. Lastly, a third phase transition was found to occur after metastable ice VII transforms into high-density amorphous (HDA) ice, which could be a disordered hydrogen-bonded network configuration of ice VII forming out of HDA ice facilitated by the decoupling of the oxygen movement and reorientation of the H 2⁡ O molecule. These results demonstrate the complexity of a seemingly simple molecule H 2⁡ O, how it can readily change its static properties with the modification of (de)compression rate, and highlight the need to use multiple TR structural and spectroscopic probes at higher time resolutions to realize the most comprehensive understanding.

Chemical bonding↗

Advanced flat top laser heating system for high pressure research at GSECARS: application to the melting behavior of germanium

Laser heating plays an essential role for in-situ high pressure high temperature studies into the physical and chemical properties of materials in the diamond anvil cell (DAC) and minerals at conditions relevant to the Earth's deep interior. High temperature experiments in the multi-Mbar (over 100 GPa) pressure range require the use of very small samples and consequently the utmost stability and controllability of the laser heating is crucial. To accomplish this, we have modified the laser heating system at GSECARS employing newly developed beam shaping optics combined with two diode-pumped, single mode fiber lasers. Varying the settings of the laser heating system, we were able to shape the beam to almost any desired intensity profile and size on the surface of the sample in the DAC, including tight focus, flat top, trident and doughnut types. The advantages and excellent performance of the flat top laser heating (FTLH) technique were demonstrated in melting experiments on germanium in the DAC at pressures up to 40 GPa.

36 MATERIALS SCIENCE↗

Surface charging, discharging and chemical modification at a sliding contact

Electrostatic charging, discharging, and consequent surface modification induced by sliding dissimilar surfaces have been studied. The surface-charge related phenomena were monitored by using a home-built capacitive, non-contact electrical probe, and the surface chemistry was studied by X-ray photoelectron spectroscopy (XPS). The experiments were performed on the disk surface of a ball-on-rotating-disk apparatus; using a glass disk and a Teflon (polytetrafluoroethylene) ball arrangement, and a polyester disks and a diamondlike carbon (DLC) coated steel ball arrangement. The capacitive probe is designed to perform highly resolved measurements, which is sensitive to relative change in charge density on the probed surface. For glass and Teflon arrangement, electrical measurements show that the ball track acquires non-uniform charging. Here not only the increase in charge density, but interestingly, increase in number of highly charged regions on the ball track was resolved. Threefold increase in the number of such highly charged regions per cycle was detected immediately before the gas breakdown-like incidences compared to that of other charge/discharge incidences at a fixed disk rotation speed. We are also able to comment on the behavior and the charge decay time in the ambient air-like condition, once the sliding contact is discontinued. XPS analysis showed a marginal deoxidation effect on the polyester disks due to the charging and discharging of the surfaces. Moreover, these XPS results clearly indicate that the wear and friction (sliding without charging) on the surface can be discarded from inducing such a deoxidation effect.

36 MATERIALS SCIENCE↗

Linear and Nonlinear Optical Properties of Metal Nanocomposite Materials

The scientific theme of this award stated in its title is “Linear and Nonlinear Optical Properties of Metal Nanoparticle Composites.” The motivation for the proposal was based on prior work that highlighted unusual third-order nonlinear optical response of metal-nanoparticle composites created by Vanderbilt researchers at the Oak Ridge National Laboratory (ORNL) by implanting metal ions into fused-silica and sapphire substrates and annealing them under appropriate conditions to produce a solid solution comprising noble-metal nanoparticles embedded in an insulating matrix. For example, the well-known localized surface plasmon resonance (LSPR) of gold and silver nanoclusters and nanoparticles was known to yield enhanced effects on the nonlinear absorption and nonlinear refractive index of these materials. The project soon expanded to embrace a wider range of materials and nanostructures, including particularly vanadium dioxide with its insulator-to-metal transition, a wide variety of substrate hosts, and zinc oxide with its multi-faceted band-edge exciton that can be coupled to plasmonic degrees of freedom in silver and aluminum. We employed second- and third-order nonlinear optical spectroscopies and confocal microscopy to quantify the coupling between nanoparticles and adsorbates across interfaces. Because ORNL closed the ion-beam surface-modification facility in 2004, we then developed a nanofabrication technique combining focused ion-beam lithography and pulsed laser deposition to create ordered arrays of metal and oxide nanoparticles in various planar geometries and heterostructures. By 2008, aided by finite-difference time-domain and finite-element calculations, we began to design and fabricate plasmonic “workbenches” on which we could excite quasiparticles (e.g., excitons, phonons, plasmons) using optical signals and electrical impulses, and map the material response down to femtosecond time and nanometer length scales. We developed additional nanofabrication capabilities (e.g., dual-layer electron-beam lithography, quantum-well fabrication and multilayer magnetron sputtering and electron-beam deposition) to create a variety of novel heterostructures as model nanocomposite systems. This led to several new opportunities to study the optical properties of these composites informed by views of potential device configurations. Among the scientific themes that emerged in published papers based on new materials and nanostructures were the following: ultrafast electron dynamics in metamaterials, including ultrafast THz microscopy of the insulator-to-metal transition in VO 2 nanoparticles; plasmon-driven electron injection to promote phase transitions in VO 2 ; and second-harmonic generation in nanostructures without inversion symmetry, in particular, the Archimedean spiral with overall sub-wavelength dimensions. We also explored dimensional and structural effects in plasmonic coupling, including exciton-plasmon coupling in ZnO nanowires; exciton-plasmon coupling in structures incorporating two-dimensional dichalcogenides; and tunable plasmon-induced transparency in plasmonic heterostructures incorporating phase-changing VO 2 . Finally, it should be noted that the work on Archimedean nanospirals and plasmon-exciton coupling led directly into a current quantum-optics research project on photon correlations in diamond nanoparticles, exemplified by the first publication from that effort [Ref. [47] in the bibliography]. A more detailed account setting in the appropriate scientific context all forty-eight papers supported by this award follows.

36 MATERIALS SCIENCE↗

Multiwalled carbon nanotubes and dispersed nanodiamond novel hybrids: Microscopic structure evolution, physical properties, and radiation resilience

We report the structure and physical properties of novel hybrids of multiwalled carbon nanotubes (MWCNTs) and ultradispersed diamond (UDD) forming nanocomposite ensemble that were subjected to 50, 100, and 10{sup 3} kGy gamma ray doses and characterized using various analytical tools to investigate hierarchical defects evolution. This work is prompted by recent work on single-walled CNTs and UDD ensemble [Gupta et al., J. Appl. Phys. 107, 104308 (2010)] where radiation-induced microscopic defects seem to be stabilized by UDD. The present experiments show similar effects where these hybrids display only a minimal structural modification under the maximum dose. Quantitative analyses of multiwavelength Raman spectra revealed lattice defects induced by irradiation assessed through the variation in prominent D, G, and 2D bands. A minimal change in the position of D, G, and 2D bands and a marginal increase in intensity of the defect-induced double resonant Raman scattered D and 2D bands are some of the implications suggesting the radiation coupling. The in-plane correlation length (L{sub a}) was also determined following Tunistra-Koenig relation from the ratio of D to G band (I{sub D}/I{sub G}) besides microscopic stress. However, we also suggest the following taking into account of intrinsic defects of the constituents: (a) charge transfer arising at the interface due to the difference in electronegativity of MWCNT C sp{sup 2} and UDD core (C sp{sup 3}) leading to phonon and electron energy renormalization; (b) misorientation of C sp{sup 2} at the interface of MWCNT and UDD shell (C sp{sup 2}) resulting in structural disorder; (c) softening or violation of the q{approx}0 selection rule leading to D band broadening and a minimal change in G band intensity; and (d) normalized intensity of D and G bands with 2D band help to distinguish defect-induced double resonance phenomena. The MWCNT when combined with nanodiamond showed a slight decrease in their conductance further affected by irradiation pointing at relatively good interfacial contact. Furthermore, owing to high thermal and electrical conductivity properties, they can facilitate potentially efficient heat-transfer applications and some results deduced using Nielsen's model is provided.

77 NANOSCIENCE AND NANOTECHNOLOGY↗