Search NASA⌕ Search

SEARCH · Search NASA

Results for “dielectric model function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Accurate Measurements of the Dielectric Constant of Seawater at L Band

This paper describes measurements of the dielectric constant of seawater at a frequency of 1.413 GHz, the center of the protected band (i.e., passive use only) used in the measurement of sea surface salinity from space. The objective of the measurements is to accurately determine the complex dielectric constant of seawater as a function of salinity and temperature. A resonant cylindrical microwave cavity in transmission mode has been employed to make the measurements. The measurements are made using standard seawater at salinities of 30, 33, 35, and 38 practical salinity units over a range of temperatures from 0 degree C to 35 degree C in 5 degree C intervals. Repeated measurements have been made at each temperature and salinity. Mean values and standard deviations are then computed. The total error budget indicates that the real and imaginary parts of the dielectric constant have a combined standard uncertainty of about 0.3 over the range of salinities and temperatures considered. The measurements are compared with the dielectric constants obtained from the model functions of Klein and Swift and those of Meissner and Wentz. The biggest differences occur at low and high temperatures.

Measurements↗
NASA NTRS1982

Simple phenomenological modeling of transition-region capacitance of forward-biased p-n junction diodes and transistor diodes

The derivation of a simple expression for the capacitance C(V) associated with the transition region of a p-n junction under a forward bias is derived by phenomenological reasoning. The treatment of C(V) is based on the conventional Shockley equations, and simpler expressions for C(V) result that are in general accord with the previous analytical and numerical results. C(V) consists of two components resulting from changes in majority carrier concentration and from free hole and electron accumulation in the space-charge region. The space-charge region is conceived as the intrinsic region of an n-i-p structure for a space-charge region markedly wider than the extrinsic Debye lengths at its edges. This region is excited in the sense that the forward bias creates hole and electron densities orders of magnitude larger than those in equilibrium. The recent Shirts-Gordon (1979) modeling of the space-charge region using a dielectric response function is contrasted with the more conventional Schottky-Shockley modeling.

Lindholm, F. A.↗
DOE OSTI2025

Model of photoemission and framework for relating quantum efficiency to stoichiometry

Simulating the quantum efficiency (QE) from photocathodes used in accelerators and photoinjectors requires accounting for the properties of the photoemissive material, the optical properties, scattering coefficients, and doping concentrations of which are dependent upon the stoichiometry. We present a rapid and flexible optical model that can be used to investigate the consequences of changes in the dielectric properties and their impact on the QE through such factors as reflectivity and laser penetration depth. Differences in materials can then be characterized by changes to parameters used to evaluate the dielectric function in a Lorentz–Drude–Resonant model. A method to characterize data is motivated by the example of copper and vetted by application to an exact analytical model. The effects of changes in parameters describing the resonant terms, which aggregate in the visible and UV regions of the spectrum, are shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2016

Submillimeter and Far-Infrared Dielectric Properties of Thin Films

The complex dielectric function enables the study of a material's refractive and absorptive properties and provides information on a material's potential for practical application. Commonly employed line shape profile functions from the literature are briefly surveyed and their suitability for representation of dielectric material properties are discussed. An analysis approach to derive a material's complex dielectric function from observed transmittance spectra in the far-infrared and submillimeter regimes is presented. The underlying model employed satisfies the requirements set by the Kramers-Kronig relations. The dielectric function parameters derived from this approach typically reproduce the observed transmittance spectra with an accuracy of less than 4%.

Cataldo, Giuseppe↗
DOE OSTI2022

Maximal absorption in ultrathin TiN films for microbolometer applications

Ultrathin light absorbers present a viable route toward improving the specific detectivity and response time of microbolometers. However, for an ultrathin film to absorb light efficiently, the dielectric function of the film and its thickness must satisfy strict requirements. Here we experimentally demonstrate an average absorptance of 48% ± 2.5% in the 8–13 μm (769–1250 cm -1 ) spectral range for 10 nm thick titanium nitride (TiN), a value bordering on the 50% fundamental absorptance limit for a suspended thin film. The heat capacity per unit area of this absorber is only 1.2 × 10 -6 J/K/cm 2 , which is beneficial for improving the response time of a microfabricated bolometer. We also show that a sufficient condition for reaching maximal absorption in an ultrathin film is that ε" $\gg$ |ε'|.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Measuring and Modeling of the Dielectric Properties and Attenuation of Vegetation

The dielectric properties and attenuation of vegetation was measured and modeled. The purpose was to: (1) measure the microwave dielectric properties of vegetation material as a function of moisture content and microwave frequency; (2) develop dielectric mixing models for the vegetation-water mixture; (3) develop a model for the loss factor of a vegetation canopy; (4) relate the results of (1) and (2) to (3); and (5) test the model in (3) against direct canopy transmission measurements.

F Ulaby↗
NASA NTRS1990

Ellipsometric study of cubic SiC

Variable angle spectroscopic ellipsometry (VASE) was applied to cubic SiC. This technique gives absolute values of the refractive index (n) and the extinction coefficient (k) of a substrate and/or a thin film of unknown material. The samples were grown by chemical vapor deposition (CVD) on p-type silicon. The substrate was aligned either on the (001) axis or 1 degree of (001). Several growth temperatures and growth durations were used. The samples were divided into two groups: (1) thick films of order 10 microns grown near optimal conditions of temperature, flow, and gas ratio; and (2) thin films of order 100 A grown at various temperatures. The ellipsometric results for samples in group 1 were analyzed using a two-phase model (substrate and ambient). Results show that for wavelengths in the visible, the refractive index of these CVD samples is equal to that reported for single crystal cubic SiC, within the experimental error, which is on the order of 1 percent. However, the extinction coefficient has a relatively large value, even above the band gap. The absorption is sample dependent and has a broad peak in the visible. The results for samples in group 2 were analyzed using a three-phase model (substrate, film, and ambient). The dielectric functions of the film, deducted from the measured n and k, were further analyzed using the effective medium approximation. The results show that the films contain 30 to 40 vol. percent amorphous silicon, i.e., silicon with only short-range order.

Alterovitz, Samuel A.↗
NASA NTRS2012

Ocean Surface Emissivity at L-band (1.4 GHz): The Dependence on Salinity and Roughness

A characterization of the emissivity of sea water at L-band is important for the remote sensing of sea surface salinity. Measurements of salinity are currently being made in the radio astronomy band at 1.413 GHz by ESA's Soil Moisture and Ocean Salinity (SMOS) mission and NASA's Aquarius instrument aboard the Aquarius/SAC-D observatory. The goal of both missions is accuracy on the order of 0.1 psu. This requires accurate knowledge of the dielectric constant of sea water as a function of salinity and temperature and also the effect of waves (roughness). The former determines the emissivity of an ideal (i.e. flat) surface and the later is the major source of error from predictions based on a flat surface. These two aspects of the problem of characterizing the emissivity are being addressed in the context of the Aquarius mission. First, laboratory measurements are being made of the dielectric constant of sea water. This is being done at the George Washington University using a resonant cavity. In this technique, sea water of known salinity and temperature is fed into the cavity along its axis through a narrow tube. The sea water changes the resonant frequency and Q of the cavity which, if the sample is small enough, can be related to the dielectric constant of the sample. An extensive set of measurements have been conducted at 1.413 GHz to develop a model for the real and imaginary part of the dielectric constant as a function of salinity and temperature. The results are compared to the predictions of models based on parameterization of the Debye resonance of the water molecule. The models and measurements are close; however, the differences are significant for remote sensing of salinity. This is especially true at low temperatures where the sensitivity to salinity is lowest.

LeVine, D. M.↗
NASA NTRS1984

Measuring and Modeling of the Dielectric Properties and Attenuation of Vegetation

The dielectric properties of vegetation material--primarily agricultural plants--as a function of moisture content and microwave frequency was measured and used to develop dielectric mixing models for the vegetation-water mixture. A model for the loss factor of a vegetation canopy was also developed. During the first phase of this investigation, three waveguide transmission systems covering from 1 to 2-GHz, from 3.5 to 6.5-GHz, and from 7.5 to 8.5-GHz bands were constructed and calibrated. By measuring the magnitude and phase of the field transmission coefficient of a given sample, it was possible to calculate the real and imaginary parts of the complex dielectric constant of the sample. Measurements were made for numerous samples of leaves and stalks of wheat and corn, and for wheat heads. Also, dielectric measurements were made of the liquid included in the vegetation material after extraction by mechanical means. The propagation loss is more than an order of magnitude greater than had previously been assumed. Various types of dielectric mixing models were investigated in terms of the available data, and a propagation model was developed and evaluated against direct canopy attenuation measurements. The canopy measurements were made by transmitting a signal from a radar antenna mounted atop a truck-mounted boom, and using a small antenna mounted on a rail beneath the canopy to receive it.

Ulaby, F. T.↗
NASA NTRS1987

Microwave dielectric spectrum of vegetation. I - Experimental observations. II - Dual-dispersion model

The microwave dielectric behavior of vegetation materials is examined as a function of water content, microwave frequency, and temperature. Dielectric spectra for various types of vegetation, such as leaves, stalks, and trunks at various moisture conditions, were measured using a coaxial probe technique. The basic features and operation of the coaxial probe system are described. Examples of dielectric measurements for the vegetation materials are presented, and the relation between temperature and the dielectric constant is studied. The development of a dual-dispersion model that accounts for the dielectric properties of water in both free and bound conditions is described. The applicability of the model is evaluated by comparing it with the dielectric data; good correlation is observed between the model and the data over a wide range of moisture conditions and over the 0.2-20 GHz range.

El-Rayes, Mohamed A.↗
DOE OSTI2021

Validity of Machine Learning in the Quantitative Analysis of Complex Scanning Near-Field Optical Microscopy Signals Using Simulated Data

Scattering-type scanning near-field optical microscope (s-SNOM) is a modern technique for subdiffractional optical imaging and spectroscopy. Over the past two decades, tremendous efforts have been devoted to modeling complex tip-sample interactions in s-SNOM, aimed at understanding the electrodynamics of materials at the nanoscale. However, due to complexities in analytical methods and the limited computation power for fully numerical simulations, compromises must be made to facilitate the modeling of tip-sample interaction, such as using quasistatic approximation or unrealistic tip geometries. Here, we apply a variety of widely utilized machine-learning methods, including k nearest neighbor and feedforward neural network etc. to study the phase-resolved spectroscopic near-field response. With only a small set of training data, which is simulated using the finite-dipole model, we demonstrate that the relation between the experimental near-field signal and sample optical constant can be one to one mapped without the need for tip modeling: for a given material with a moderate dielectric function, its complex near-field spectrum can be accurately determined within the mid-IR spectral range, and vice versa. Our preliminary study sets the stage for future exploration using real experimental data. Our method is beneficial for processing the increasing amount of data accumulated across many research groups and especially useful for user facilities such as synchrotron-based national laboratories where a large amount of data is generated on a daily basis.

36 MATERIALS SCIENCE↗
NASA NTRS2022

Status of the Dielectric Constant of Sea Water at L-Band for Remote Sensing of Salinity

The model expressing the dielectric constant of sea water at microwave frequencies as a function of salinity and temperature is an important element in remote sensing of sea surface salinity. It is also important independently as a description of the physical properties of salt water. A major milestone was the development in the late 1970s by Klein and Swift of a model based on laboratory measurements at L- and S-band and a functional form supported by theory for polar molecules and previous work on freshwater. Much of the subsequent work has focused on measurements at higher frequency and determining model parameters tuned to apply for applications, such as remote sensing of sea surface temperature (SST). Interest in the dielectric constant at 1.4 GHz (L-band) increased again with the development of soil moisture ocean salinity (SMOS) and Aquarius to measure salinity from space, but there have been few new measurements at L-band and often confusion regarding the applicability of new models at 1.4 GHz. The objective of this article is to compare available models in the context of how well they represent the dielectric constant of sea water at 1.4 GHz. Among the criteria applied will be the recent measurements at the George Washington University of the dielectric constant at 1.4 GHz

Microwave Remote Sensing↗
DOE OSTI2024

Spacecraft surface charging as a function of material properties

Spacecraft material behavior plays a very important role in space missions. Spacecraft immersed in plasma get charged by absorbing plasma particles and by emitting electrons from spacecraft surfaces via photoelectron and secondary electron emission. Spacecraft charging depends heavily on material properties such as work function, secondary electron yield, dielectric constant, and electric conductivity among other. Material properties are typically assumed to be static in charging models. However, it is well known that this is not the case in space. This makes spacecraft charging predictions very challenging. Material properties are well characterized before the spacecraft is put in orbit through characterization in the lab under clean conditions. However, once in space, material properties change due to the harsh and very dynamic space environment. We present a new capability to predict material behavior in space from first-principles modeling. The ongoing effort seeks to couple material models, density functional theory (DFT) and molecular dynamic (MD) codes, with environment models, plasma kinetic codes. This preliminary study will show results of surface charging as a function of material work function, dielectric constant, and conductivity.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Higher Order, Hybrid BEM/FEM Methods Applied to Antenna Modeling

In this presentation, the authors address topics relevant to higher order modeling using hybrid BEM/FEM formulations. The first of these is the limitation on convergence rates imposed by geometric modeling errors in the analysis of scattering by a dielectric sphere. The second topic is the application of an Incomplete LU Threshold (ILUT) preconditioner to solve the linear system resulting from the BEM/FEM formulation. The final tOpic is the application of the higher order BEM/FEM formulation to antenna modeling problems. The authors have previously presented work on the benefits of higher order modeling. To achieve these benefits, special attention is required in the integration of singular and near-singular terms arising in the surface integral equation. Several methods for handling these terms have been presented. It is also well known that achieving ~he high rates of convergence afforded by higher order bases may als'o require the employment of higher order geometry models. A number of publications have described the use of quadratic elements to model curved surfaces. The authors have shown in an EFIE formulation, applied to scattering by a PEC .sphere, that quadratic order elements may be insufficient to prevent the domination of modeling errors. In fact, on a PEC sphere with radius r = 0.58 Lambda(sub 0), a quartic order geometry representation was required to obtain a convergence benefi.t from quadratic bases when compared to the convergence rate achieved with linear bases. Initial trials indicate that, for a dielectric sphere of the same radius, - requirements on the geometry model are not as severe as for the PEC sphere. The authors will present convergence results for higher order bases as a function of the geometry model order in the hybrid BEM/FEM formulation applied to dielectric spheres. It is well known that the system matrix resulting from the hybrid BEM/FEM formulation is ill -conditioned. For many real applications, a good preconditioner is required to obtain usable convergence from an iterative solver. The authors have examined the use of an Incomplete LU Threshold (ILUT) preconditioner . to solver linear systems stemming from higher order BEM/FEM formulations in 2D scattering problems. Although the resulting preconditioner provided aD excellent approximation to the system inverse, its size in terms of non-zero entries represented only a modest improvement when compared with the fill-in associated with a sparse direct solver. Furthermore, the fill-in of the preconditioner could not be substantially reduced without the occurrence of instabilities. In addition to the results for these 2D problems, the authors will present iterative solution data from the application of the ILUT preconditioner to 3D problems.

Fink, P. W.↗
NASA NTRS2001

Radiation Losses Due to Tapering of a Double-Core Optical Waveguide

The theoretical model we designed parameterizes the power losses as a function of .the profile shape for a tapered, single mode, optical dielectric coupler. The focus of this project is to produce a working model that determines the power losses experienced by the fibers when light crosses a taper region. This phenomenon can be examined using coupled mode theory. The optical directional coupler consists of a parallel, dual-channel, waveguide with minimal spacing between the channels to permit energy exchange. Thus, power transfer is essentially a function of the taper profile. To find the fields in the fibers, the approach used was that of solving the Helmholtz equation in cylindrical coordinates involving Bessel and modified Bessel functions depending on the location.

Lyons, Donald R.↗
DOE OSTI2024

Laterally Modulating Carrier Concentration by Ion Irradiation in CdO Thin Films for Mid‐IR Plasmonics

This report demonstrates tunable carrier densities in CdO thin films through local ion irradiation, providing lateral control of mid‐IR optical properties. Ion‐solid interactions produce donor‐like defects that boost electron concentrations from the practical minimum of 2.5 × 10 19 cm −3 to a maximum of 2.5 × 10 20 cm −3 by metered ion exposure. This range is achieved using He, N, Ar, or Au ions at 1–2.8 MeV; when normalized by displacements per atom, all ion species produce comparable results. Since CdO is well‐described by the Drude model, irradiation‐tuned carrier densities directly alter the infrared dielectric function, and in turn, mid‐infrared optical properties. Further, it is demonstrated that by combining irradiation with traditional lithography, CdO films expose to ions in the presence of 3‐µm thick, patterned photoresist exhibit lateral carrier density profiles with ≈400‐nm resolution. Scanning near‐field optical microscopy reveals sharp optical interfaces with almost no companion contrast in surface morphology, microstructure, or crystallinity. Finally, CdO lateral homostructures supporting surface plasmon polaritons (SPPs) are demonstrated whose dispersion relation can be tuned through periodic patterning in a monolithic platform by simple nanofabrication. Numerical simulations show these polaritons result from strong coupling between excitations at CdO plasma frequencies and SPPs supported by the platinum substrate.

cadmium oxide↗
NASA NTRS1986

Electromagnetic scattering theory

Electromagnetic scattering theory is discussed with emphasis on the general stochastic variational principle (SVP) and its applications. The stochastic version of the Schwinger-type variational principle is presented, and explicit expressions for its integrals are considered. Results are summarized for scalar wave scattering from a classic rough-surface model and for vector wave scattering from a random dielectric-body model. Also considered are the selection of trial functions and the variational improvement of the Kirchhoff short-wave approximation appropriate to large size-parameters. Other applications of vector field theory discussed include a general vision theory and the analysis of hydromagnetism induced by ocean motion across the geomagnetic field. Levitational force-torque in the magnetic suspension of the disturbance compensation system (DISCOS), now deployed in NOVA satellites, is also analyzed using the developed theory.

Bird, J. F.↗
NASA NTRS2011

Remote Sensing of Salinity: The Dielectric Constant of Sea Water

Global monitoring of sea surface salinity from space requires an accurate model for the dielectric constant of sea water as a function of salinity and temperature to characterize the emissivity of the surface. Measurements are being made at 1.413 GHz, the center frequency of the Aquarius radiometers, using a resonant cavity and the perturbation method. The cavity is operated in a transmission mode and immersed in a liquid bath to control temperature. Multiple measurements are made at each temperature and salinity. Error budgets indicate a relative accuracy for both real and imaginary parts of the dielectric constant of about 1%.

LeVine, David M.↗