Search NASA⌕ Search

SEARCH · Search NASA

Results for “differential electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Ionospheric electron density irregularities observed by satellite-to-satellite, dual-frequency, low-low Doppler tracking link

A low-low, satellite-to-satellite, dual-frequency, Doppler tracking experiment was performed. The data are analyzed here for irregularities in electron density at the altitude of 212 km. The differential Doppler data with the relative motion term removed are integrated to obtain a representation of the electron density variation along the satellite path. Well-known large-scale features such as the equatorial geomagnetic anomaly and day/night ionization level differences are clearly observed in the integrated data. The larger crest of the morning geomagnetic anomaly is seen to occur in the southern (winter) hemisphere in agreement with previous observations. In addition, a sharp peak in the electron density at the day-to-night transition point is observed in two consecutive revolutions. This effect may be due to the previously postulated atmospheric shock wave generated by supersonic motion of the terminator.

Estes, R. D.↗

Strong interlayer charge transfer due to exciton condensation in an electrically isolated GaAs quantum well bilayer

We introduce a design of electrically isolated “floating” bilayer GaAs quantum wells (QW), in which application of a large gating voltage controllably and highly reproducibly induces charges that remain trapped in the bilayer after removal of the gating voltage. At smaller gate voltages, the bilayer is fully electrically isolated from external electrodes by thick insulating barriers. This design permits full control of the total and differential densities of two coupled 2D electron systems. The floating bilayer design provides a unique approach for studying systems inaccessible by simple transport measurements. It also provides the ability to measure the charge transfer between the layers, even when the in-plane resistivities of the 2D systems diverge. We measure the capacitance and inter-layer tunneling spectra of the QW bilayer with independent control of the top and bottom layer electron densities. Our measurements display strongly enhanced inter-layer tunneling current at v T =1, a signature of exciton condensation of a strongly interlayer-correlated bilayer system. With fully tunable densities of individual layers, the floating bilayer QW system provides a versatile platform to access previously unavailable information on the quantum phases in electron bilayer systems.

42 ENGINEERING↗

A rocket-borne airglow photometer

The design of a rocket-borne photometer to measure the airglow emission of ionized molecular nitrogen in the 391.4 nm band is presented. This airglow is a well known and often observed phenomenon of auroras, where the principal source of ionization is energetic electrons. It is believed that at some midlatitude locations energetic electrons are also a source of nighttime ionization in the E region of the ionosphere. If this is so, then significant levels of 391.4 nm airglow should be present. The intensity of this airglow will be measured in a rocket payload which also contains instrumentation to measured in a rocket payload which also contains instrumentation to measure energetic electron differential flux and the ambient electron density. An intercomparison of the 3 experiments in a nightime launch will allow a test of the importance of energetic electrons as a nighttime source of ionization in the upper E region.

Paarmann, L. D.↗

Soft X-ray spectroscopy of solar flares - An overview

An overview of the current status of high spectral resolution soft X-ray observations of solar flares is given. The review concentrates primarily on recent results and interpretations of results obtained from orbiting Bragg crystal spectrometers flow during the last solar maximum on the US DoD P78-1 spacecraft, the NASA SMM, and the ISAS Hinotori spacecraft. Results and several key issues regarding interpretation of the spectra are presented. Specifically, the dynamics of coronal flare plasmas as revealed by X-ray line profiles and wavelength shifts are discussed. Recent results concerning the theory of chromospheric evaporation are given. The temperature of coronal flare plasma is discussed within the context of a differential mission measure. Results concerning electron density measurements, nonequilibrium processes, and relative element abundances are also reviewed.

Doschek, G. A.↗

The 1992/93 eclipse of 31 Cygni

Extensive new ultraviolet and optical spectra of an atmospheric eclipse define the physical properties throughout the wind and chromosphere of 31 Cyg. These data require mass loss of approximately 3 x 10(exp -8) solar masses/yr in a wind that may merge smoothly into the chromosphere. Considerations of how energy is injected into the wind, however, suggest that the chromosphere and wind are separate structures. Most, if not all, of the velocity structure in metallic lines, which we have heretofore simulated with Doppler widths in the range 15-25 km/s, results from differential expansion of the atmosphere. Electron densities in the inner R(sub star) of the chromosphere are in the range 1.5 x 10(exp 9) - 2 x 10(exp 8)/cu cm, which implies clumping of the gas. The ionization of oxygen and nitrogen is consistent with clumping by factors of 3-30 in the outer chromosphere, roughly the amount required to give enough gas pressure to support the chromosphere. Chromospheric gas in 31 Cyg becomes hotter with increasing height, thus with decreasing optical depth, in a way that seems similar for all the zeta Aur binaries. Excitation temperature for Fe II in 1992/93 rises from about 5000 K at the deepest points sampled to about 12,500 K high in the wind. Strengths of violet Balmer lines give an excitation temperature for hydrogen of 6200-6500 K above a radial mass column density of approximately 0.01 g/sq cm. This amount of excitation implies that Lyman-alpha is thermalized beneath about 4 x 10(exp -3) g/sq cm. The outer atmosphere was symmetrical to within a factor of 2 in 1992/93, although it was clearly variable at this level, and it had similar mass column densities as in 1982. One manifestation of the variability was a flow toward the B star at phases 0.013-0.022 spanning velocities 45-100 km/s. Several lines of evidence point to a complicated and variable ionization in the wind: At large distance from the K star, measured mass column densities are less by up to a factor of 3 than required by a smoothly flowing wind. Also, much of the gas beyond r = 350 solar radii = 1.75 R(sub star) has a negative radial velocity. Radial velocities of the shell lines imply the outer atmosphere rotates in the direction of orbital motion, possibly through the deflection of wind flow lines in this direction.

Eaton, Joel A.↗

Electrically‐Driven Metal‐Insulator Transitions Emerging from Localizing Current Density and Temperature

Negative differential resistance (NDR) is a key electronic response enabling two‐terminal artificial neurons that can be achieved through different physical phenomena, including phase‐homogeneous current density and temperature (electro‐thermal) localizations and spatially‐localized metal‐insulator phase transitions (MITs). These two effects have been observed to occur sequentially in select electrically‐biased transition metal oxides. However, it is unknown why and under what conditions localizing behaviors precede MITs, particularly as a function of device length scale. To this end, the interplay between phase‐homogeneous electro‐thermal localizations and MITs is investigated in a 3D multiphysics simulation of a lateral thin film device, using the material properties of the prototype MIT material VO 2 . These findings demonstrate that the MIT is nucleated through dynamically localizing current density and temperature. A critical device width (≈0.7 µm in this study) is identified, below which both the electrically‐induced electro‐thermal and phase inhomogeneities cease to appear. It is demonstrated that the formation of spatial inhomogeneities directly relates to device dimensions, and demonstrate the decoupling of NDR from the MIT through device scaling relationships. These results provide insight into the material phenomena underlying the material's electrical responses, clarifying conditions under which spatial inhomogeneities form in electrically‐biased MIT materials.

artificial neuron↗

Effects of ionospheric turbulence on SPS pilot signal

The spatial variation of the electron density was studied by monitoring the differential Doppler on radio beacons aboard the Navy navigation satellites. The radio frequency heater was used to deposit energy in the F-region ionosphere with the heating frequency above peak plasma frequency. The effects of the solar power satellite power beam on the pilot signal were simulated. It was found that a small depletion was formed in the beam and that there was turbulence in the elctron density up the magnetic field line from the beam. It is suggested that the depletion will not seriously affect the power or pilot beams of the solar power satellite.

Clynch, J. R.↗

Numerical modeling of quasi-static coronal loops. I - Uniform energy input

A quasi-static numerical model for coronal loops is considered for the case of a uniform energy input per unit volume into the loops. A line dipole model is used to represent the loop magnetic field, and the variations in loop cross section observed in X-ray photographs are parameterized by the ratio between the cross-sectional areas at the loop apex and base. The results of numerical modeling indicate that for an area ratio greater than unity, increases in the area ratio of a loop with a given length and apex area cause a general rise in electron density and a fall in the temperature gradient, leading to large increases in the differential emission factor at high temperatures. The differential function obtained is significantly different from that predicted by analytical models; however, analytical predictions for the temperature-electron density relations are comparable to numerical results. It is also concluded that even a symmetrical loop may have a maximum temperature away from the apex.

Vesecky, J. F.↗

Electron density power spectrum in the local interstellar medium

Interstellar scintillation (ISS), fluctuations in the amplitude and phase of radio waves caused by scattering in the interstellar medium, is important as a diagnostic of interstellar plasma turbulence. ISS is also of interest because it is noise for other radio astronomical observations. The unifying concern is the power spectrum of the interstellar electron density. Here we use ISS observations through the nearby (less than or approximately =1 kpc) (ISM) to estimate the spectrum. From measurements of angular broadening of pulsars and extragalactic sources, decorrelation bandwidth of pulsars, refractive steering of features in pulsar dynamic spectra, dispersion measured fluctuations of pulsars, and refractive scintillation index measurements, we construct a composite structure function that is approximately power law over 2 x 10(exp 6) m less than scale less than 10(exp 13) m. The data are consistent with the structure function having a logarithmic slope versus baseline less than 2; thus there is a meaningful connection between scales in the radiowave fluctuation field and the scales in the electron density field causing the scattering. The data give an upper limit to the inner scale, l(sub o) less than or approximately 10(exp 8) m and are consistent with much smaller values. We construct a composite electron density spectrum that is approximately power law over at least the approximately = 5 decade wavenumber range 10(exp -13)/m less than wavenumber less than 10(exp -8)/m and that may extend to higher wavenumbers. The average spectral index of electron density over this wavenumber range is approximately = 3.7, very close to the value expected for a Kolmogorov process. The outer scale size, L(sub o), must be greater than or approximately = 10(exp 13) m (determined from dispersion measure fluctuations). When the ISS data are combined with measurements of differential Faraday rotation angle, and gradients in the average electron density, constraints can be put on the spectrum at much smaller wave numbers. The composite spectrum is consistent with a Kolmogorov-like power law over a huge range (10 or more decades) of spatial wavenumber with an infrared outer scale L(sub o) greater than or approximately 10(exp 18)m. This power-law subrange-expressed as ratio of outer to inner scales-is comparable to or larger than that of other naturally occurring turbulent fluids, such as the oceans or the solar wind. We outline some of the theories for generating and maintaining such a spectrum over this huge wavenumber range.

Armstrong, J. W.↗

Propagation studies using a theoretical ionosphere model

The mid-latitude ionospheric and neutral atmospheric models are coupled with an advanced three dimensional ray tracing program to see what success would be obtained in predicting the wave propagation conditions and to study to what extent the use of theoretical ionospheric models is practical. The Penn State MK 1 ionospheric model, the Mitra-Rowe D region model, and the Groves' neutral atmospheric model are used throughout this work to represent the real electron densities and collision frequencies. The Faraday rotation and differential Doppler velocities from satellites, the propagation modes for long distance high frequency propagation, the group delays for each mode, the ionospheric absorption, and the spatial loss are all predicted.

Lee, M.↗

Differential phase measurements of D-region partial reflections

Differential phase partial reflection measurements were used to deduce D region electron density profiles. The phase difference was measured by taking sums and differences of amplitudes received on an array of crossed dipoles. The reflection model used was derived from Fresnel reflection theory. Seven profiles obtained over the period from 13 October 1971 to 5 November 1971 are presented, along with the results from simultaneous measurements of differential absorption. Some possible sources of error and error propagation are discussed. A collision frequency profile was deduced from the electron concentration calculated from differential phase and differential absorption.

Wiersma, D. J.↗

Ionospheric Studies with the Differential Doppler Technique

This report is essentially a review of the measurements related to the ionosphere utilizing the differential Doppler technique. A brief study of the theory is presented, in which the error incurred in measurements of ionospheric electron content, caused by the assumption of common-path propagation, is shown as a function of the zenith angle of observation for different values of the critical frequency foF2. Some measurements of electron densities, electron content, horizontal gradients, irregularities, and magnetic-storm effects are discussed. Comments are also made about the method of combining the differential Doppler with the Faraday rotation measurements to establish a necessary constant of integration in the measurements made with satellites. It is concluded that the differential Doppler technique, with harmonically related frequencies transmitted to or from rockets or satellites, can provide accurate information about the electron density or electron content of the medium, and that the knowledge of these quantities is valuable in understanding the morphology of the ionospheric processes.

IONOSPHERE↗

Preparation and Characterization of the Skutterudite-Related Phase Ru0.5Pd0.5 Sb3

A new skutterudite phase Ru0.5Pd0.5 Sb3 was prepared. It adds to the many materials with the skutterudite structure that have shown a good potential for thermoelectric applications. Single- phase polycrystalline samples were prepared and characterized by x-ray analysis, electron probe microanalysis, density, sound velocity, thermal expansion coefficient, and differential thermal analysis measurements.

ternary↗

Synthesis and characterization of Pt(Cu 0.67 Sn 0.33 )

Pt(Cu 0.67 Sn 0.33 ) has recently been found in a natural sample. In order to be able to characterize this new ternary compound, we synthesized it from the elements. Samples were characterized by X-ray powder diffraction, differential scanning calorimetry, thermal relaxation calorimetry, and scanning electron microscopy studies. Density functional theory-based model calculations complemented the experimental studies. Pt(Cu 0.67 Sn 0.33 )was already formed at a relatively low temperature of 773 K. Rietveld refinement of Pt(Cu 0.67 Sn 0.33 ) has been carried out in CuAu-type or L1 0 -type structure, space group P4/mmm, with Pt on 0,0,0 and disordered Cu and Sn on 1/2, 1/2, 1/2 and Z = 1. The lattice parameters are a = 2.823(1) Å, c = 3.64(1) Å, and V = 29.00(4) Å which are in good agreement with values obtained earlier on the natural sample and with the results of DFT calculations. The vibrational entropy for Pt(Cu 0.67 Sn 0.33 ) is $S_{298.15}^{vib}$ = 79.9(7) J mol -1 K -1 . The pressure dependence up to 36(2) GPa of the unit-cell volume and the lattice parameters and unit-cell volume have been obtained by synchrotron based powder diffraction using a diamond anvil cell. A fit of a 3rd-order Birch–Murnaghan equation of state to the Pt(Cu 0.67 Sn 0.33 )) (p,V)-data results in a bulk modulus of B 0 = 215(27) GPa and B' = 5(2).

36 MATERIALS SCIENCE↗

Magnetic and thermodynamic structure of the solar corona during sunspot minimum

A model of the solar corona during sunspot minimum was constructed. It was suggested that pole-equator asymmetry is caused by interaction of global azimuthal electric currents in the corona and potential magnetic fields originating below the corona. The problem was reduced to a nonlinear ordinary differential equation for a structural function. Taking the difference in electron density between the equatorial plane and the polar direction from observations, the basic equation was solved and the global electric current distribution around the Sun along with the magnetic and thermodynamic structures of the solar corona was derived. The asymmetry between the two hemispheres, which can be due to the magnetic quadrupole, is considered in detail. It is shown that an additional quadrupole term in the magnetic field representation affects the position of polar coronal hole boundaries differently in the two hemispheres. As a result, the outflow from the two polar regions is found to be different.

Osherovich, V. A.↗

Preparation and Thermoelectric Properties of the Skutterudite-Related Phase Ru(0.5)Pd(0.5)Sb3

A new skutterudite phase Ru(0.5)Pd(0.5)Sb3 was prepared. This new phase adds to a large number of already known materials with the skutterudite structure which have shown good potential for thermoelectric applications. Single phase, polycrystalline samples were prepared and characterized by x-ray analysis, electron probe microanalysis, density, sound velocity, thermal-expansion coefficient, and differential thermal analysis measurements. Ru(0.5)Pd(0.5)Sb3 has a cubic lattice, space group Im3 (T(sup 5, sub h)), with a = 9.298 A and decomposes at about 920 K. The Seebeck coefficient, the electrical resistivity, the Hall effect, and the thermal conductivity were measured on hot-pressed samples over a wide range of temperatures. Preliminary results show that Ru(0.5)Pd(0.5)Sb3 behaves as a heavily doped semiconductor with an estimated band gap of about 0.6 eV. The lattice thermal conductivity of Ru(0.5)Pd(0.5)Sb3 is substantially lower than that of the binary isostructural compounds CoSb3 and IrSb3. The unusually low thermal conductivity might be explained by additional hole and charge transfer phonon scattering in this material. The potential of this material for thermoelectric applications is discussed.

Caillat, T.↗