Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Tracing Phase Transformation and Lattice Evolution in a TRIP Sheet Steel under High-Temperature Annealing by Real-Time In Situ Neutron Diffraction

Real-time in situ neutron diffraction was used to characterize the crystal structure evolution in a transformation-induced plasticity (TRIP) sheet steel during annealing up to 1000 °C and then cooling to 60 °C. Based on the results of full-pattern Rietveld refinement, critical temperature regions were determined in which the transformations of retained austenite to ferrite and ferrite to high-temperature austenite during heating and the transformation of austenite to ferrite during cooling occurred, respectively. The phase-specific lattice variation with temperature was further analyzed to comprehensively understand the role of carbon diffusion in accordance with phase transformation, which also shed light on the determination of internal stress in retained austenite. These results prove the technique of real-time in situ neutron diffraction as a powerful tool for heat treatment design of novel metallic materials.

Yu, Dunji↗
DOE OSTI2018

Laser Material Processing Final Report CRADA No. TC-321-92

Current commercial cw flashlamp pumped solid-state laser systems employed in laser machining operate at multi-hundred watt to kilowatt levels and produce 30-100 times diffraction limited beam quality. Developing similar power lasers but with a beam quality 5-10 times better is an important advancement in the laser machining industry especially precision laser machining.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Interpretation of Indications Generated by Small Welding Discontinuities in Ultrasonic Time of Flight Diffraction Technique

The article presents results of research on non-destructive ultrasonic time of flight diffraction technique TOFD and metallographic examinations of selected cross-sections of a MAG welded joint. The main objective was to compare the results of TOFD and metallographic examination at the locations where a large number of point-like indications, located on specific depths, have been detected on TOFD images and analyse the impact of this type of indication on results of a welded joint evaluation. Considered, that the indications have not exhibited separations between upper and lower diffraction signals, because of their small heights, measuring of height of indications in those cases was impossible. In all cases, the occurrence of discontinuities of 0.16–0.78 mm in height, in locations indicated by TOFD has been confirmed.

42 ENGINEERING↗
DOE OSTI2025

SNAPRed: Reduction of multidimensional neutron time-of-flight diffraction data

SNAP is a neutron time-of-flight diffractometer at the Spallation Neutron Source operated by Oak Ridge National Laboratory. It generates large arrays of neutron detection events that encode the crystalline atomic structure of materials under study. SNAPRed is an application that makes these datasets accessible to end users by orchestrating the process of data reduction while automatically managing the variable neutron instrumentation configuration. It supports arbitrary grouping and masking of individual detector pixels and includes custom-developed data compression approaches to accommodate the large volumes of data generated by the SNAP instrument.

Diffraction↗
DOE OSTI2015

Polarization-dependent diffraction in all-dielectric, twisted-band structures

We propose a concept for light polarization management: polarization-dependent diffraction in all-dielectric microstructures. Numerical simulations of light propagation show that with an appropriately configured array of twisted bands, such structures may exhibit zero birefringence and at the same time diffract two circular polarizations with different efficiencies. Non-birefringent structures as thin as 3 μm have a significant difference in diffraction efficiency for left- and right-hand circular polarizations. We identify the structural parameters of such twisted-band matrices for optimum performance as circular polarizers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Low-temperature nanoscale heat transport in a gadolinium iron garnet heterostructure probed by ultrafast x-ray diffraction

Time-resolved x-ray diffraction has been used to measure the low-temperature thermal transport properties of a Pt/Gd3Fe5O12//Gd3Ga5O12 metal/oxide heterostructure relevant to applications in spin caloritronics. A pulsed femtosecond optical signal produces a rapid temperature rise in the Pt layer, followed by heat transport into the Gd3Fe5O12 (GdIG) thin film and the Gd3Ga5O12 (GGG) substrate. The time dependence of x-ray diffraction from the GdIG layer was tracked using an accelerator-based femtosecond x-ray source. The ultrafast diffraction measurements probed the intensity of the GdIG (1 −1 2) x-ray reflection in a grazing-incidence x-ray diffraction geometry. The comparison of the variation of the diffracted x-ray intensity with a model including heat transport and the temperature dependence of the GdIG lattice parameter allows the thermal conductance of the Pt/GdIG and GdIG//GGG interfaces to be determined. Complementary synchrotron x-ray diffraction studies of the low-temperature thermal expansion properties of the GdIG layer provide a precise calibration of the temperature dependence of the GdIG lattice parameter. The interfacial thermal conductance of the Pt/GdIG and GdIG//GGG interfaces determined from the time-resolved diffraction study is of the same order of magnitude as previous reports for metal/oxide and epitaxial dielectric interfaces. The thermal parameters of the Pt/GdIG//GGG heterostructure will aid in the design and implementation of thermal transport devices and nanostructures.

36 MATERIALS SCIENCE↗
NASA NTRS2024

CODEX Optical Design and Alignment

The COronal Diagnostic EXperiment (CODEX) is a Heliophysics mission to measure the density, temperature, and velocity of the electrons in the solar corona with the primary goal of improving our understanding of the physical conditions of the solar wind in the acceleration region. The temperature and velocity measurement requires much higher signal-to-noise ratio than the density measurements. In solar coronagraphs, the diffraction of the solar disk light due to the occulting element is the dominant source of noise. Therefore, to further suppress the diffracted sun light with respect to the existing coronagraphs is a critical element of the CODEX design. To minimize the stray light due to diffraction, the selected optical design is a two-stage standard coronagraph with an external occulter, an internal occulter, and a Lyot stop. What is unique for this design is that a focal mask was inserted at the telescope focal plane. It works together with the field lens suppressing the stray light down by ~ another order of magnitude as compared to a traditional three-stage approach. During the optical design, a Fourier Transform based beam propagation software, i.e., GLAD, was used to model the beam path through the full coronagraph, from the external occulter to the detector array. All diffraction sensitive elements: external occulter, internal occulter, focal mask, and Lyot stop were carefully modeled and optimized. As a result, the requirement of achieving a stray light level which is one order of magnitude lower than F-corona was satisfied. On the other hand, to achieve the final suppression, a precision optical alignment is another must. This paper also presents our creative alignment procedure: using the combination of metrology, precision alignment equipment, and real time diffraction ring monitoring to minimize the diffraction. The final test results show that the suppression ratio (B/B 0 ) reaches 10 -11 level, which is equivalent to one order of magnitude lower than F-corona.

CODEX optical design and alignment↗
NASA NTRS2010

315mJ, 2-micrometers Double-Pulsed Coherent Differential Absorption Lidar Transmitter for Atmospheric CO2 Sensing

The design of a double pulsed, injection seeded, 2-micrometer compact coherent Differential absorption Lidar (DIAL) transmitter for CO2 sensing is presented. This system is hardened for ground and airborne applications. The design architecture includes three continuous wave lasers which provide controlled on and off line seeding, injection seeded power oscillator and a single amplifier operating in double pass configuration. As the derivative a coherent Doppler wind lidar, this instrument has the added benefit of providing wind information. The active laser material used for this application is a Ho: Tm:YLF crystal operates at the eye-safe wavelength. The 3-meter long folded ring resonator produces energy of 130-mJ (90/40) with a temporal pulse length around 220 nanoseconds and 530 nanosecond pulses for on and off lines respectively. The separation between the two pulses is on the order of 200 microseconds. The line width is in the order of 2.5MHz and the beam quality has an M(sup 2) of 1.1 times diffraction limited beam. A final output energy for a pair of both on and off pulses as high as 315 mJ (190/125) at a repetition rate of 10 Hz is achieved. The operating temperature is set around 20 C for the pump diode lasers and 10 C for the rod. Since the laser design has to meet high-energy as well as high beam quality requirements, close attention is paid to the laser head design to avoid thermal distortion in the rod. A side-pumped configuration is used and heat is removed uniformly by passing coolant through a tube slightly larger than the rod to reduce thermal gradient. This paper also discusses the advantage of using a long upper laser level life time laser crystal for DIAL application. In addition issues related to injection seeding with two different frequencies to achieve a transform limited line width will be presented.

Yu, Jirong↗
DOE OSTI2018

Quasiepitaxial Growth of Organic Crystalline Thin-Films

The presence of excitons at room temperature in organic semiconductors distinguish them from traditional semiconductors, providing exceptional opportunities for manipulating energy in a range of structures from LEDs, polariton lasers, transparent photovoltaics, and optical switches. However, control over crystalline order, orientation, and defect formation are crucial to the fabrication and optimization of these excitonic electronics. In this work we have demonstrated new routes and new understanding in the growth of ordered organic thin film crystals and multilayer crystals. These crystals are composed of incommensurate organic semiconductors with sustained azimuthal registry and controlled crystalline orientation grown from the bottom up. By probing a range of molecular pairings with in-situ and real-time diffraction, we have demonstrated that one of the driving forces behind this growth is the requirement of surface energy matching of the lowest energy crystalline planes, which is distinct from the requirements of lattice matching for inorganic epitaxy. We have also demonstrated a new route to non-equilibrium quasiepitaxial growth of crystalline organic multilayers through selective edge nucleation dynamics that could provide new control over molecular orientation in organic quantum wells. This work provides a more universal understanding of the key requirements for growth regimes that have been historically inaccessible and will enable enhanced excitonic devices

36 MATERIALS SCIENCE↗
DOE OSTI2021

Physics-Based Optical Neuromorphic Classification

Typical approaches to classify scenes from light convert the light field to electrons to perform the computation in the digital electronic domain. This conversion and downstream computational analysis require significant power and time. Diffractive neural networks have recently emerged as unique systems to classify optical fields at lower energy and high speeds. Previous work has shown that a single layer of diffractive metamaterial can achieve high performance on classification tasks. In analogy with electronic neural networks, it is anticipated that multilayer diffractive systems would provide better performance, but the fundamental reasons for the potential improvement have not been established. In this work, we present extensive computational simulations of two - layer diffractive neural networks and show that they can achieve high performance with fewer diffractive features than single layer systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1986

High-efficiency broad-area single-quantum-well lasers with narrow single-lobed far-field patterns prepared by molecular beam epitaxy

Broad-area single-quantum-well graded-index waveguide separate-confinement heterostructure lasers were fabricated by molecular beam epitaxy. A high external quantum efficiency of 79 percent and stable, single-lobed far-field patterns with a beam divergence as narrow as 0.8 deg (1.9 times diffraction limit) for a 100 micron-wide laser were obtained under pulsed conditions.

Larsson, A.↗
NASA NTRS1992

Evaluation of stable and unstable resonator configurations for efficient second-harmonic laser systems

A comparative evaluation of a stable resonator, self-filtering unstable resonator, and an unstable resonator with a graded reflectivity mirror (GRM) as the output coupler is presented. The GRM resonator produced a slope efficiency of 1.4 percent, best beam quality (1.4 times diffraction limit), and highest conversion efficiency (50 percent). Other accomplishments include determination of the importance of measuring thermal focusing when designing unstable resonators, development of techniques in measuring thermal focusing and birefringence in laser materials, and development of a high brightness laser system for efficient second harmonic conversion.

Williams-Byrd, Julie A.↗
DOE OSTI2018

Twinning and Dislocation Evolution during Shock Compression and Release of Single Crystals: Real-Time X-Ray Diffraction

Determining the temporal evolution of twinning and/or dislocation slip, in real time (nanoseconds), in single crystals subjected to plane shock wave loading is a long-standing scientific need. Non-cubic crystals pose special challenges because they have many competing slip and twinning systems. Here, we report on time-resolved, in situ, synchrotron Laue x-ray diffraction measurements during shock compression and release of magnesium single crystals that are subjected to compression along the c-axis. Significant twinning was observed directly during stress release following shock compression; during compression, only dislocation slip was observed. Our measurements unambiguously distinguish between twinning and dislocation slip on nanosecond timescales in a shocked hexagonal-close-packed metal.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Line profile analysis of dislocation densities of the δ-phase 239 Pu-2.0 at%Ga alloy using neutron diffraction

Time-of-flight neutron diffraction measurements were conducted at ambient conditions to study microstructures of the δ-phase 239 Pu-2at% Ga alloy. Based on the line profile analysis of diffraction data we derived dislocation densities using a correction routine to account for the anisotropic strain broadening. Our results show here that the average dislocation density in the as-received sample, previously treated at cryogenic temperatures, is five times higher than the dislocation density measured after annealing the sample, indicating that the neutron instrumentation used in this work has sufficient resolution to detect the dislocation density changes in different sample processing. These results are also in reasonably good agreement with the dislocation densities previously reported based on TEM observations and x-ray diffraction data, suggesting that the simple correction routines applied in this work have a fairly good fidelity for deriving important microstructural information such as dislocation density for elastically highly anisotropic δ-phase 239 Pu-Ga alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantifying Dynamic Signal Spread in Real-Time High-Energy X-ray Diffraction

Abstract Measured intensity in high-energy monochromatic X-ray diffraction (HEXD) experiments provides information regarding the microstructure of the crystalline material under study. The location of intensity on an areal detector is determined by the lattice spacing and orientation of crystals so that changes in the heterogeneity of these quantities are reflected in the spreading of diffraction peaks over time. High temporal resolution of such dynamics can now be experimentally observed using technologies such as the mixed-mode pixel array detector (MM-PAD) which facilitates in situ dynamic HEXD experiments to study plasticity and its underlying mechanisms. In this paper, we define and demonstrate a feature computed directly from such diffraction time series data quantifying signal spread in a manner that is correlated with plastic deformation of the sample. A distinguishing characteristic of the analysis is the capability to describe the evolution from the distinct diffraction peaks of an undeformed alloy sample through to the non-uniform Debye–Scherrer rings developed upon significant plastic deformation. We build on our previous work modeling data using an overcomplete dictionary by treating temporal measurements jointly to improve signal spread recovery. We demonstrate our approach in simulations and on experimental HEXD measurements captured using the MM-PAD. Our method for characterizing the temporal evolution of signal spread is shown to provide an informative means of data analysis that adds to the capabilities of existing methods. Our work draws on ideas from convolutional sparse coding and requires solving a coupled convex optimization problem based on the alternating direction method of multipliers.

Engineering↗