Search NASA⌕ Search

SEARCH · Search NASA

Results for “discrete element method,”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Open source implementation of glued sphere discrete element method and nonspherical biomass fast pyrolysis simulation

Here, in this research, a glued-sphere Discrete Element Method (DEM) method was implemented in the open-source, Computational Fluid Dynamics (CFD) software MFiX. The implementation was verified using a cylinder-wall collision and then validated by simulating the packing and fluidization of non-spherical particles. The validated code was applied to simulate fast pyrolysis of non-spherical biomass particles in a bubbling fluidized bed. The glued sphere occupancy ratio was proposed to quantify the quality of shape resolution using glued sphere. Shape resolution showed significant influence on the packing height in the simulation of particle packing and an occupancy ratio of 80 % was recommended. Its influence is minor in fully fluidized bed but can be 8 times higher in fixed fluidized bed. Three tested heat transfer models predicted similar yields of elongated biomass fast pyrolysis. The solver developed in this research can be used to simulate other multiphase reacting flows involving non-spherical particles.

42 ENGINEERING↗

Dynamic induced softening in frictional granular materials investigated by discrete-element-method simulation

A granular system composed of frictional glass beads is simulated here using the discrete element method. The intergrain forces are based on the Hertz contact law in the normal direction with frictional tangential force. The damping due to collision is also accounted for. Systems are loaded at various stresses and their quasistatic elastic moduli are characterized. Each system is subjected to an extensive dynamic testing protocol by measuring the resonant response to a broad range of ac drive amplitudes and frequencies via a set of diagnostic strains. The system, linear at small ac drive amplitudes, has resonance frequencies that shift downward (i.e., modulus softening) with increased ac drive amplitude. Detailed testing shows that the slipping contact ratio does not contribute significantly to this dynamic modulus softening, but the coordination number is strongly correlated to this reduction. This suggests that the softening arises from the extended structural change via break and remake of contacts during the rearrangement of bead positions driven by the ac amplitude.

58 GEOSCIENCES↗

Particles climbing along a vertically vibrating tube: numerical simulation using the Discrete Element Method (DEM)

It has been reported experimentally that granular particles can climb along a vertically vibrating tube partially inserted inside a granular silo. Here, we use the Discrete Element Method (DEM) available in the Multiphase Flow with Interphase eXchanges (MFIX) code to investigate this phenomenon. By tracking the movement of individual particles, the climbing mechanism was illustrated and analyzed. The numerical results show that a sufficiently high vibration strength is needed to form a low solids volume fraction region inside the lower end of the vibrating tube, a dense region in the middle of the tube, and to bring the particles outside from the top layers down to fill in the void. The results also show that particle compaction in the middle section of the tube is the main cause of the climbing. Consequently, varying parameters which influence the compacted region, such as the restitution coefficient, change the climbing height.

42 ENGINEERING↗

Simulation of discrete cracks driven by nearly incompressible fluid via 2D combined finite-discrete element method

Here, we propose a novel hydraulic solver in order to simulate key mechanisms that control fluid-driven cracks in the framework of the combined finite-discrete element method (FDEM). The main innovative aspect of the present work is the independence of the fluid's critical time step size with the fracture opening. This advantage is extremely important because it means that very fine meshes can be used around areas of interest, such as boreholes, without penalizing the computational cost as fractures propagate (ie, open) and the fluid flows through them. This is a great advantage over other recently introduced approaches that exhibit a dependency of the time step in the form of Δt crit ∝ (l/a) 2 where l is the element size and a is the fracture aperture. This paper presents a series of benchmark cases for the proposed solver. The rationale adopted by the authors was to benchmark and validate the implementation of the hydraulic solver in an incremental fashion, starting from the simplest cases and building in complexity. The calculations shown in this work clearly demonstrate that the proposed approach is able to reproduce analytical results for fluid flow through a single crack. The results presented in this paper also demonstrate that the new approach is robust enough to deal with complex fracture patterns and complex geometries; the obtained fluid-driven fracture patterns in the vicinity of a borehole certainly stand to the scrutiny of human visual perception.

58 GEOSCIENCES↗

Discrete Element Method Analysis for Metal Powders Used in Additive Manufacturing, and DEM Simulation Tutorial Using LIGGGHTS-PUBLIC [PowerPoint and paper]

Discrete Element Method (DEM) is a method of analysis to evaluate the dynamic interactions between granular particles. This method has been used in the pharmaceutical industry to improve the powder compaction process for tablet manufacturing. There are also applications in agriculture, food industry, and manufacturing. Direct energy deposition is an additive manufacturing technique which uses metallic powders fed through a nozzle, melted using a directed laser, and transformed into a solid object layer by layer. One way of feeding metal particles into the system involves the use of a vibrating hopper. Given a specified amplitude and frequency input, the hopper will enable the powder to travel up a path, and inject through the system with assistance from a stream of gas. The mechanical properties of a printed object can vary, depending on the characteristics of the powder flow and the particles’ as-received properties. Improved understanding of dynamic interactions of flowing powders could enable additive manufacturing components with 2D or 3D variations in mechanical properties, e.g., density. This work uses DEM simulation software to investigate the effects of particle cohesion, friction, and density on the quality of the flow by performing an angle of repose simulation, which is often used as a metric to evaluate the flowability of powders.

36 MATERIALS SCIENCE↗

Mechanism of formation of wiggly compaction bands in porous sandstone: 2. Numerical simulation using discrete element method

Wiggly compaction bands in porous aeolian s andstone vary from chevron shape to wavy shape to nearly straight. In some outcrops these variations occur along a single band. Here, a bonded close-packed discrete element model is used to investigate what mechanical properties control the formation of wiggly compaction bands (CBs). To simulate the volumetric yielding failure of porous sandstone, a discrete element shrinks when the force state of one of its bonds reaches the yielding cap defined by the failure force and the aspect ratio (k) of the yielding ellipse. A Matlab code “MatDEM 3D ” has been developed on the basis of this enhanced discrete element method. Mechanical parameters of elements are chosen according to the elastic properties and the strengths of porous sandstone. In numerical simulations, the failure angle between the band segment and maximum principle stress decreases from 90° to approximately 45° as k increases from 0.5 to 2, and compaction bands vary from straight to chevron shape. With increasing strain, subsequent compaction occurs inside or beside compacted elements, which leads to further compaction and thickening of bands. The simulations indicate that a greater yielding stress promotes chevron CBs, and a greater cement strength promotes straight CBs. Combined with the microscopic analysis introduced in the companion paper, we conclude that the shape of wiggly CBs is controlled by the mechanical properties of sandstone, including the aspect ratio of the yielding ellipse, the cri tical yielding stress, and the cement strength, w hich are d etermined primarily by petrophysical attributes, e.g., grain sorting, porosity, and cementation.

58 GEOSCIENCES↗

Coarse Graining Discrete Element Method Information in Particle-in-Cell Length Scales Using a Machine Learning Approach

This report details the development of a machine learning (ML)-driven framework to coarse-grain inter-particle collision dynamics from high-fidelity Discrete Element Method (DEM) simulations to Particle-in-Cell (PIC) scales for gas-solid systems. Traditional PIC models, while computationally efficient, rely on empirical granular stress formulations that fail to capture the full complexity of collision physics, particularly the heterogeneity in particle dynamics. This study adopts a bottom-up approach, integrating insights from DEM simulations to improve the physical fidelity and interpretability of PIC-scale models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precursory Off-Fault Deformation in Restraining and Releasing Step Overs: Insights From Discrete Element Method Models

Accelerating geophysical activity is detected preceding some, but not all, large earthquakes. This observation may indicate that no precursors occur before some earthquakes, or that the instrumentation lacks the required sensitivity. Here, to aid crustal monitoring efforts, we use discrete element method models to identify the locations and styles of deformation that may provide useful information about approaching fault reactivation. We model the reactivation of two healed rough faults in a variety of step over configurations, embedded in a host rock with varying amounts of damage subject to shear velocity loading parallel to the faults. Both the fault geometry and ratio of fault to host rock strength control the amount of off-fault deformation. Consistent with field observations, models with larger steps and more preexisting host rock damage produce higher amounts of off-fault deformation. We assess the size of the continuous regions of high velocities and strains to compare the value of the precursory information of each velocity and strain component. Comparing the three components of the velocity vector suggests that the fault-parallel velocity produces the largest and most temporally continuous regions of elevated velocity. The size of these regions increases toward failure, indicating the usefulness of tracking this component. Comparing the volumetric and shear components of the three-dimensional strain tensor suggests that during most of the interseismic period, the shear strain provides more information about approaching fault slip than the volumetric strain. However, in the days and months preceding fault reactivation, both the shear and volumetric strains provide similarly valuable information.

58 GEOSCIENCES↗

Simulation of Powder Layer Deposition in Additive Manufacturing Processes Using the Discrete Element Method

This document serves as a final report to a small effort where several improvements were added to a LLNL code GEODYN-­L to develop Discrete Element Method (DEM) algorithms coupled to Lagrangian Finite Element (FE) solvers to investigate powder-­bed formation problems for additive manufacturing. The results from these simulations will be assessed for inclusion as the initial conditions for Direct Metal Laser Sintering (DMLS) simulations performed with ALE3D. The algorithms were written and performed on parallel computing platforms at LLNL. The total funding level was 3-­4 weeks of an FTE split amongst two staff scientists and one post-­doc. The DEM simulations emulated, as much as was feasible, the physical process of depositing a new layer of powder over a bed of existing powder. The DEM simulations utilized truncated size distributions spanning realistic size ranges with a size distribution profile consistent with realistic sample set. A minimum simulation sample size on the order of 40-­particles square by 10-­particles deep was utilized in these scoping studies in order to evaluate the potential effects of size segregation variation with distance displaced in front of a screed blade. A reasonable method for evaluating the problem was developed and validated. Several simulations were performed to show the viability of the approach. Future investigations will focus on running various simulations investigating powder particle sizing and screen geometries.

36 MATERIALS SCIENCE↗

Simulation of Mechanical Fractionation of Chopped Whole-Plant Corn (WPC) Using Discrete Element Method (DEM)

Fractionating whole-plant corn (WPC) in a single-pass harvesting system requires studies on the WPC-to-equipment interaction for improved property control, as well as mechanical and air-driven separation processes compared to the traditional multi-pass grain and stover harvesting system. The discrete element method (DEM) technique has the potential to simulate WPC mechanical fractionation and support simulation-based design of WPC separation processes. In this study, methods to develop DEM particle models of WPC (kernel, cob, stalk, and husk) and their material properties for simulating mass fractionation using the ASABE standard mechanical shaker were proposed. Measurement was done on the axial dimensions (major, intermediate, and minor) and mass of each WPC type (mean sample size is 56), sampled from single-pass harvesting. Applying gaussian multivariate regression and bootstrapping re-sampling techniques, a DEM particle approximate to each WPC was developed. Sensitivity analysis of the DEM Young‘s modulus, Poisson‘s ratio, and interaction parameters of coefficient of restitution, coefficient of rolling friction, and coefficient of static friction on mass fraction was performed after 156 ASABE sieve-shaking DEM simulation runs, generated using Latin Hypercube Design (LHD) design of experiment (DOE) from 19 DEM material parameters. DEM simulation using Hertz-Mindlin with flexible bond contact laws and DOE optimized material properties successfully reproduced the mass fractions retained in ASABE sieves at 9.8% mean relative error and a coefficient of determination of R2 = 0.87. Here, the DEM methodology developed for mechanical WPC mass fractionation could be deployed to perform virtual design of feedstock handling equipment and performance analysis of mechanical fraction systems.

09 BIOMASS FUELS↗

Impact Fracture and Fragmentation of Glass via the 3D Combined Finite-Discrete Element Method

A driving technical concern for the automobile industry is their assurance that developed windshield products meet Federal safety standards. Besides conducting innumerable glass breakage experiments, product developers also have the option of utilizing numerical approaches that can provide further insight into glass impact breakage, fracture, and fragmentation. The combined finite-discrete element method (FDEM) is one such tool and was used in this study to investigate 3D impact glass fracture processes. To enable this analysis, a generalized traction-separation model, which defines the constitutive relationship between the traction and separation in FDEM cohesive zone models, was introduced. The mechanical responses of a laminated glass and a glass plate under impact were then analyzed. For laminated glass, an impact fracture process was investigated and results were compared against corresponding experiments. Correspondingly, two glass plate impact fracture patterns, i.e., concentric fractures and radial fractures, were simulated. The results show that for both cases, FDEM simulated fracture processes and fracture patterns are in good agreement with the experimental observations. The work demonstrates that FDEM is an effective tool for modeling of fracture and fragmentation in glass.

42 ENGINEERING↗

Thermal conductivity modeling of monodispersed microspheres using discrete element method

Particle beds are widely used in various systems and processes, such as particle heat exchangers, granular flow reactors, and additive manufacturing. Accurate modeling of the thermal conductivity of particle beds and understanding of their heat transfer mechanisms are important. However, previous models were based on simple cubic packing of particles, which could not accurately represent the actual heat transfer processes under certain conditions. Here, we examine the effect of the packing structure on the thermal conductivity of particle beds. We use monodispersed silica microspheres with average particle sizes ranging from 23 to 330 μm as a model material. We employ a transient hot-wire technique to measure the thermal conductivity of the particle beds with packing density of 43%–57% within a temperature range of room temperature to 500 °C and under N2 gaseous pressures of 20–760 Torr. We then use a discrete element method (DEM) to obtain the realistic packing structure of the particles, which is then fed into a finite-element model (FEM) to calculate the thermal conductivity, with the consideration of solid conduction, gas conduction, and radiation heat transfer. Our results show that the thermal conductivity model based on the more realistic random packing structure derived from the DEM shows better agreement with the experimental data compared to that based on the simple cubic-packing structure. The combined DEM and FEM methodology can serve as a useful tool to predict the effective thermal conductivity of particle beds and to quantify different heat transfer mechanisms under various conditions.

14 SOLAR ENERGY↗

Simulation of mixed-mode fracture using the combined finite–discrete element method

It has been shown experimentally that under mixed tensile and compressive stress states, a corresponding mixed-mode fracture will occur. Here, the formation of mixed-mode fractures is investigated using the combined finite–discrete element method. A series of simulations with confining pressures ranging from 7.5 to 150 MPa generate a spectrum of mixed-mode failure conditions. These stress states at failure span the transition from the tensile to compressive failure. The models reproduce previous experiments on Carrara marble using a dog-bone geometry, and a comparison shows good qualitative agreement with the experimental observations. This paper demonstrates that mixed-mode fracture can be captured via numerical simulations and identifies areas where further research is required to better understand mixed-mode fracture processes.

42 ENGINEERING↗

Modeling powder spreadability in powder-based processes using the discrete element method

Powder-bed fusion (PBF) processes refer to a subset of Additive Manufacturing (AM) techniques where powder is spread on the build-plate before melting (by a laser or electron beam). While PBF processes are attractive due to their ability for realizing complex structures that are either difficult or impossible to create through conventional means, the parts fabricated with these techniques can exhibit defects such as pores, inclusions, and excessive surface roughness. To minimize these defects, much research has been dedicated towards process maturation by optimizing laser or electron beam parameters. However, these developmental efforts typically do not address the recoating process where achieving dense and uniform layers of powder is a necessity for ensuring process repeatability and part quality. While the recoating process can be studied through experimentation, the dynamics of particle movement are difficult to analyze experimentally. Therefore, here, in this study, powder spreading in PBF was simulated through the Discrete Element Method (DEM) to elucidate the mechanisms that control powder-bed quality. Utilizing the Buckingham Pi theorem, a dimensionless metric referred to as the spreading index is developed that combines powder-bed density, roughness, and particle size to assess the quality of powder layers. The formulated spreading index is then related to several dimensionless quantities that provide insight into the mechanisms dominating powder spreading in PBF. The DEM simulations conducted in this work focused on the scenario where powder is spread onto an existing powder bed and revealed that a reduction in the recoating velocity causes an increase in the spreading index while little to no impact on the spreading index was observed when varying layer thickness from 30 μm to 75 μm.Particle size effects on the powder-bed quality were also investigated.

36 MATERIALS SCIENCE↗

Modeling the Interaction Between Hydraulic and Natural Fractures Using Dual-Lattice Discrete Element Method

The interaction between hydraulic fractures (HF) and natural fractures (NF) will lead to complex fracture networks due to the branching and merging of natural and hydraulic fractures in unconventional reservoirs. In this paper, a newly developed hydraulic fracturing simulator based on discrete element method is used to predict the generation of complex fracture network in the presence of pre-existing natural fractures. By coupling geomechanics and reservoir flow within a dual lattice system, this simulator can effectively capture the poro-elastic effects and fluid leakoff into the formation. When HFs are intercepting single or multiple NFs, complex mechanisms such as direct crossing, arresting, dilating and branching can be simulated. Based on the model, the effects of injected fluid rate and viscosity, the orientation and permeability of NFs and stress anisotropy on the HF-NF interaction process are investigated. Combined impacts from multiple parameters are also examined in the paper. The numerical results show that large values of stress anisotropy, intercepting angle, injection rate and viscosity will impede the opening of NFs.

02 PETROLEUM↗

Investigation of thermal damage in explosive bridgewire detonators via discrete element method simulations

Exploding bridgewire (EBW) detonators are used to rapidly and reliably initiate energetic reactions by exploding a bridgewire via Joule heating. While the mechanisms of EBW detonators have been studied extensively in nominal conditions, comparatively few studies have addressed thermally damaged detonator operability. We present a mesoscale simulation study of thermal damage in a representative EBW detonator, using discrete element method (DEM) simulations that explicitly account for individual particles in the pressed explosive powder. We use a simplified model of melting, where solid spherical particles undergo uniform shrinking, and fluid dynamics are ignored. The subsequent settling of particles results in the formation of a gap between the solid powder and the bridgewire, which we study under different conditions. In particular, particle cohesion has a significant effect on gap formation and settling behavior, where sufficiently high cohesion leads to coalescence of particles into a free-standing pellet. This behavior is qualitatively compared to experimental visualization data, and simulations are shown to capture several key changes in pellet shape. We derive a minimum and maximum limit on gap formation during melting using simple geometric arguments. In the absence of cohesion, results agree with the maximum gap size. With increasing cohesion, the gap size decreases, eventually saturating at the minimum limit. In conclusion, we present results for different combinations of interparticle cohesion and detonator orientations with respect to gravity, demonstrating the complex behavior of these systems and the potential for DEM simulations to capture a range of scenarios.

cohesive powders↗

Study on small-strain behaviours of methane hydrate sandy sediments using discrete element method

Methane hydrate bearing soil has attracted increasing interest as a potential energy resource where methane gas can be extracted from dissociating hydrate-bearing sediments. Seismic testing techniques have been applied extensively and in various ways, to detect the presence of hydrates, due to the fact that hydrates increase the stiffness of hydrate-bearing sediments. With the recognition of the limitations of laboratory and field tests, wave propagation modelling using Discrete Element Method (DEM) was conducted in this study in order to provide some particle-scale insights on the hydrate-bearing sandy sediment models with pore-filling and cementation hydrate distributions. The relationship between shear wave velocity and hydrate saturation was established by both DEM simulations and analytical solutions. Obvious differences were observed in the dependence of wave velocity on hydrate saturation for these two cases. From the shear wave velocity measurement and particle-scale analysis, it was found that the small-strain mechanical properties of hydrate-bearing sandy sediments are governed by both the hydrate distribution patterns and hydrate saturation.

58 GEOSCIENCES↗

Effects of Particle Diameter and Coke Layer Thickness on Solid Flow and Stress Distribution in BF by 3D Discrete Element Method

In order to reduce ironmaking-related CO{sub 2} emissions, hydrogen-enriched blast furnace (BF) operation is currently under development. In hydrogen-enriched BF operation, coke layer thickness can be decreased to reduce CO{sub 2} emissions. However, BFs operating with thin coke layers may experience instability or discontinuous phenomena such as particle slip and gas channeling problems, so it is important to optimize the particle diameter and coke layer thickness for optimal BF operation. In this study, the effects of particle diameter and coke layer thickness on the solid flow and stress distribution in a BF were analyzed using a three-dimensional discrete element method. Furthermore, the effects of particle diameter and coke layer thickness on the burden layer stabilities, particle velocities, and particle stress distributions have been investigated. The results show that decreasing the coke layer thickness caused instability owing to the mixing of the coke and ore layers in the BF-cohesive zone and slight increases in both the average particle velocities and the average normal particle stress magnitudes. In addition, the average particle velocities and average normal particle stresses were higher for the smaller particles than for the larger ones during the simulations.

36 MATERIALS SCIENCE↗