Search NASA⌕ Search

SEARCH · Search NASA

Results for “effect size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Pore size effects on the sorption of supercritical carbon dioxide in mesoporous CPG-10 silica

Excess sorption isotherms of supercritical carbon dioxide in mesoporous CPG-10 silica glasses with nominal pore sizes of 75 (7.5 nm) and 350 (35 nm) were measured gravimetrically at 35 C and 50 C and pressures of 0-200 bar. Formation of broad maxima in the excess sorption was observed at fluid densities below the bulk critical density. Positive values of excess sorption were measured at bulk densities below about 0.65-0.7 g/cm3, whereas zero and negative values were obtained at higher densities, indicating that the interfacial fluid becomes less dense than the corresponding bulk fluid at high fluid densities. A shift of the excess sorption peak position to higher fluid density is found with increasing pore width. The excess sorption of CO2 normalized to the specific surface area is higher for the 35 nm pore size material, suggesting pore confinement effects. Conversely, the pore volume normalized excess sorption is higher for the 7.5 nm pore size material. Assessment of mean pore density reveals regions of constant pore fluid density, located between the excess sorption peak and the adsorption/depletion transition. Both materials exhibit such regions of constant mean pore fluid density as a function of bulk CO2 density at the lower temperature of 35 C, but not at 50 C. The results of this study suggest that the CO2 storage capacity in quartz-rich reservoirs is higher for sites with low temperature and rock textures characterized by narrow pores with high surface to volume ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Initial assessment of alternative carbon fiber geometries for design of cost-effective compressive performance: Size effect studies

Carbon fiber provides opportunity to reduce weight in structural composites, including wind turbine blades, due to the material's superior specific stiffness and specific strength compared to alternatives. Despite these advantages, cost and compressive performance are considered weaknesses for carbon fiber products available today. Studies to produce low-cost carbon fiber alternatives, including the use of textile-derived precursor systems, have shown progress and merit through the DOE/ORNL low-cost carbon fiber initiatives. Here, this work focuses on enabling increases in compressive strength through design of the carbon fiber geometry, applicable to both textile and conventional precursor systems, while also providing opportunities to reduce carbon fiber processing costs. Fiber-resin interface and fiber alignment are among the most frequently cited factors controlling composite compressive performance. However, it is believed that there is opportunity in traditionally unexplored routes to increasing compressive strength through alteration of the carbon fiber geometry by increasing the fiber area moment of inertia and/or the fiber perimeter and interfacial area. This paper presents initial results from manufacturing carbon fiber materials to assess the impacts of carbon fiber size on tested composite compressive performance with projected neutral or even beneficial impact on fiber and composite manufacturing economics. Carbon fiber systems with increasing size illustrate a favorable correlation for compressive performance greater than predicted from a micromechanical failure model. The manufacturing and mechanical test results support the hypothesis of this work that alterations to fiber geometry can be used to produce improvements of the compressive strength of carbon fiber reinforced polymers and provide incentive for related work in designing alternative shapes to further enhance compressive performance.

42 ENGINEERING↗

Hydrogenation of Diesters on Copper Catalyst Anchored on Ordered Hierarchical Porous Silica: Pore size effect

An ordered hierarchically porous silica (HPS) with the coexistence of both mesopores and abundant micropores was fabricated and used as support for the preparation of copper-based catalysts (Cu/HPS). The ordered mesoporous structure of the Cu/HPS catalysts was retained. In addition, both Cu0 and Cu+ species are found to be highly dispersed. It might be attributed to the anchoring effect of micropores and the formation of Cu-O-Si species derived from the strong interaction between surface silica and copper precursor. The Cu/HPS catalysts showed excellent performances in the hydrogenation of dimethyl adipate. The catalytic activity in dimethyl oxalate hydrogenation depended on the surface reaction, while the activity in dimethyl adipate hydrogenation will be readily controlled by pore diffusion, which can be improved by tailoring the pore size of HPS. These findings could be meaningful instruction for the rational design of industrial catalysts for the hydrogenation of various diesters.

ester, hydrogenation, higherarchical, copper, diff↗

Ferroelectricity in ultrathin strained BaTiO3 films: probing the size effect by ultraviolet Raman spectroscopy

We demonstrate a dramatic effect of film thickness on the ferroelectric phase transition temperature, Tc, in strained BaTiO3 films grown on SrTiO3 substrates. Using variable temperature ultraviolet Raman spectroscopy enables measuring Tc in ¯lms as thin as 1.6 nm, and film thickness variation from 1.6 to 10 nm leads to Tc tuning from 70 to about 925 K. Raman data are consistent with synchrotron x-ray scattering results, which indicate the presence of of 180± domains below Tc, and thermodynamic phase-field model calculations of Tc as a function of thickness.

43 PARTICLE ACCELERATORS↗

Data for Clumping Index Estimation With 30°-tilted Cameras in Row Crops: Evaluation of Methods and Segment Size Effects

The clumping index (CI) quantifies the spatial distribution of foliage elements and is essential for accurately estimating the plant area index (PAI), canopy radiative transfer, and photosynthesis. Traditionally, the finite-length averaging method (LX), the gap size distribution method (CC), and a combined approach of CC and LX (CLX) have been applied to instruments like TRAC and digital hemispherical photography to estimate CI. However, a comprehensive evaluation of these methods in row crops remains limited, especially regarding the influence of segment size on CI. Meanwhile, digital cameras offer a cost-effective and user-friendly solution for canopy measurements in row crops, yet their application in this context remains underexplored. In this study, we employed a new approach using a 30°-tilted digital camera to estimate CI in corn and soybean fields, applying the LX, CC, and CLX methods. We systematically assessed the performance of these three methods by combining field measurements in real-world fields with simulations using the LESS 3D radiative transfer model. Our results showed that CLX applied to the whole image and 45° segment offered accurate estimation of CI (bias within ±0.1, RMSE < 0.2) and PAI (bias within ±0.4, RMSE < 1) in real-world fields and LESS simulations. The accuracy of the LX method was highly sensitive to segment size, with the best performance observed at the 15° segment (PAI bias within ±0.4). In contrast, the CC method remained stable across different segment sizes, and its performance was generally comparable to that of LX, except at the 15° segment. Across view zenith angles, CI derived from CC generally showed a continuous increase, while those from LX and CLX followed a rising trend at small zenith angles but began to decline at 68°, likely due to an increasing proportion of no-gap segments. Seasonally, LX tended to show decreasing CI during early growth stages but increased as the canopy matured, whereas CC and CLX showed gradually increasing CI before plateauing at peak PAI. The 30°-tilted camera effectively captured CI variations across different angles and growth stages, making it a practical and robust instrument for row crop canopy structure analysis. Applying these CI methods to digital cameras offers a low-cost and accessible CI estimation alternative, improving canopy structure monitoring accuracy in row crops.

Modeling↗

Investigation of Current Parameters and Size Effects on Mechanical Properties During Pulsed Electrically Assisted Uniaxial Tension in T2 Red Copper Sheets

It has been found that the electrically assisted (EA) forming can alleviate size effects due to the electroplastic effect. Size effects exist in the manufacture of tiny workpieces and severely affect material performances because the grain boundary hardening effect and strong anisotropy of the mechanical properties of the grains will lead to a strong variation in the forming properties of the sheet. In order to investigate the influences of current parameters and size effects on mechanical properties in EA forming, EA uniaxial tension tests with varying grain size and thickness were conducted on T2 red copper sheets. The small temperature rise shows the thermal effect is slight; the flow stress decreases with the increase in pulse frequency, pulse duty ratio and current density; the finer grains still result in higher strength and better plasticity; Moreover, the fluctuations of tensile strength, maximum uniform strain and fracture strain decrease with the increase in the ratio of thickness to grain size (N) at constant current density, which means pulsed current can weaken size effects.

36 MATERIALS SCIENCE↗

Particle size effect and the mechanism of hematite reduction by the outer membrane cytochrome OmcA of Shewanella oneidensis MR-1

The cycling of iron at the Earth’s near surface is profoundly influenced by dissimilatory metal reducing microorganisms, and many studies have focused on unraveling electron transfer mechanisms between these bacteria and Fe(III)-(oxyhydr)oxides. However, these efforts have been complicated by the fact that these minerals often occur in the micro- to nanosize regime, and in relevant natural environments as well as in the laboratory are subject to aggregation. The nature of the physical interface between the cellular envelope, the outer-membrane cytochromes responsible for facilitating the interfacial electron transfer step, and these complex mineral particulates is thus difficult to probe. Previous studies using whole cells have reported reduction rates that do not correlate with particle size. In the present study we isolate the interaction between the decaheme outer-membrane cytochrome OmcA of Shewanella oneidensis and nanoparticulate hematite, examining the reduction rate as a function of particle size and reaction products through detailed characterization of the electron balance and the structure and valence of iron at particle surfaces. By comparison with abiotic reduction via the smaller molecule ascorbic acid, we show that the reduction rate is systematically controlled by the sterically accessible interfacial contact area between OmcA and hematite in particle aggregates; rates increase once pore throat sizes in aggregates become as large as OmcA. Simultaneous measure of OmcA oxidation against Fe(II) release shows a ratio of 1:10, consistent with a cascade OmcA oxidation mechanism heme by heme. X-ray absorption spectroscopies reveal incipient magnetite on the reacted surfaces of the hematite nanoparticles after reaction. The collective findings establish the importance of accessibility of physical contact between the terminal reductases and iron oxide surfaces, and through apparent consistency of observations help reconcile behavior reported at the larger more complex scale of whole cell studies.

58 GEOSCIENCES↗

Contradictory Feature Size Effects in the Tensile Yield Strength of Cu Sheets Produced Using Different Sequences Involving Annealing, Rolling, and Grinding

The feature size effect is significant research interest in the field of microforming. It is assumed that the size effect is influenced by the material preparation process. To verify this, the feature size effects associated with the tensile yield strength of Cu sheets with thicknesses ranging from 100 to 200 μm, produced using different sequences involving annealing, rolling, and grinding, were studied. Differing feature size effects were observed in the Cu specimens, and it was confirmed that the size effect was indeed influenced by the specimen preparation sequence. The tensile yield strengths of the annealed–ground–rolled and annealed–rolled specimens increased as the specimen thicknesses decreased. However, an opposing size effect was observed in the case of the annealed–rolled–annealed, annealed–ground, and annealed–rolled–ground specimens. The reduction ratio did not alter the trend associated with the size effect, but influenced the intensity of the size effect. It is believed that the reinforcement and erosion of the surface-hardened layer introduced during rolling resulted in the contradictory results.

36 MATERIALS SCIENCE↗

The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations

The indentation size effect is one of several size effects on strength for which 'smaller is stronger.' Through use of geometrically self-similar indenters such as cones and pyramids, the size effect is manifested as an increase in hardness with decreasing depth of penetration and becomes important at depths of less than approximately 1 {micro}m. For spherical indenters, the diameter of the sphere is the most important length scale; spheres with diameters of less than approximately 100 {micro}m produce measurably higher hardnesses. We critically review experimental observations of the size effect, focusing on the behavior of crystalline metals, and examine prevailing ideas on the mechanisms responsible for the effect in light of recent experimental observations and computer simulations.

36 MATERIALS SCIENCE↗

Size Effects in the Thermal Conductivity of Amorphous Polymers

Manipulating thermal conductivity through nanoengineering is of critical importance to advance technologies, such as soft robotics, artificial skin, wearable electronics, batteries, thermal insulation, and thermoelectrics. Here, by examining amorphous polymers, including polystyrene, polypropylene, polyethylene, and ethylene vinyl alcohol, using molecular dynamics simulations, we find that the thermal conductivities of amorphous polymers can be reduced below their amorphous limit by size effects. Size-dependent thermal transport in amorphous materials is decomposed into crystalline, crystalline-to-amorphous, and amorphous regimes. In the amorphous regime, the mean free path of propagating heat carriers can range from tens of nanometers to more than 100 nm, contributing 16%–36% of the total thermal conductivity. A two-channel model that combines no size effect (i.e., difusons and locons) and size effect (i.e., propagons) is proposed to account for size-dependent thermal conductivity. We also find that the presence of charged molecules in polymers can significantly affect the thermal conductivity and its size effects due to electrostatic interactions. Overall, this work provides insights into the thermal conductivity of amorphous polymers that will have a broad impact on the nano- and chemical engineering of polymers for various energy-related applications.

36 MATERIALS SCIENCE↗

Robust Size-Effects Compensation Through Regularized Lever-Arm Estimation

Size effects are an unavoidable nuisance in inertial navigation using sensors which are not co-located at the navigational point of interest. When estimating transforms between the navigation point and sensor locations, some trajectories preclude observation of all model parameters. Regularization is proposed to avoid over-fitting size-effects models. The result yields robust size effects compensation in other regions of flight.

42 ENGINEERING↗