Search NASA⌕ Search

SEARCH · Search NASA

Results for “elasticity coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

A study of the piezoelectric resonance in metal organic NLO single crystals: Sodium D-isoascorbate monohydrate and Lithium L-ascorbate dihydrate

Large single crystals of Sodium D-isoacsorbate monohydrate and Lithium L-ascorbate dehydrate were grown using solution growth technique. Dielectric constant and dielectric loss were monitored as a function of frequency at different temperatures. These are typically characterized by strong resonance peaks. The piezoelectric coefficients d{sub 31}, elastic coefficient (S{sub 11}) and electromechanical coupling coefficient (k{sub 31}) were estimated by resonance-antiresonance method. The temperature dependence of the resonance-peaks frequencies was studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear Elastic Effects on the Energy Flux Deviation of Ultrasonic Waves in GR/EP Composites

In isotropic materials, the direction of the energy flux (energy per unit time per unit area) of an ultrasonic plane wave is always along the same direction as the normal to the wave front. In anisotropic materials, however, this is true only along symmetry directions. Along other directions, the energy flux of the wave deviates from the intended direction of propagation. This phenomenon is known as energy flux deviation and is illustrated. The direction of the energy flux is dependent on the elastic coefficients of the material. This effect has been demonstrated in many anisotropic crystalline materials. In transparent quartz crystals, Schlieren photographs have been obtained which allow visualization of the ultrasonic waves and the energy flux deviation. The energy flux deviation in graphite/epoxy (gr/ep) composite materials can be quite large because of their high anisotropy. The flux deviation angle has been calculated for unidirectional gr/ep composites as a function of both fiber orientation and fiber volume content. Experimental measurements have also been made in unidirectional composites. It has been further demonstrated that changes in composite materials which alter the elastic properties such as moisture absorption by the matrix or fiber degradation, can be detected nondestructively by measurements of the energy flux shift. In this research, the effects of nonlinear elasticity on energy flux deviation in unidirectional gr/ep composites were studied. Because of elastic nonlinearity, the angle of the energy flux deviation was shown to be a function of applied stress. This shift in flux deviation was modeled using acoustoelastic theory and the previously measured second and third order elastic stiffness coefficients for T300/5208 gr/ep. Two conditions of applied uniaxial stress were considered. In the first case, the direction of applied uniaxial stress was along the fiber axis (x3) while in the second case it was perpendicular to the fiber axis along the laminate stacking direction (x1).

Prosser, William H.↗

Scaled free energies, power-law potentials, strain pseudospins, and quasiuniversality for first-order structural transitions

We consider ferroelastic first-order phase transitions with N{sub OP} order-parameter strains entering Landau free energies as invariant polynomials that have N{sub V} structural-variant Landau minima. The total free energy includes (seemingly innocuous) harmonic terms, in the n=6-N{sub OP} nonorder-parameter strains. Four three-dimensional (3D) transitions are considered, tetragonal/orthorhombic, cubic/tetragonal, cubic/trigonal, and cubic/orthorhombic unit-cell distortions, with, respectively, N{sub OP}=1, 2, 3, and 2; and N{sub V}=2, 3, 4, and 6. Five two-dimensional (2D) transitions are also considered, as simpler examples. Following Barsch and Krumhansl, we scale the free energy to absorb most material-dependent elastic coefficients into an overall prefactor, by scaling in an overall elastic energy density; a dimensionless temperature variable; and the spontaneous-strain magnitude at transition {lambda}<<1. To leading order in {lambda} the scaled Landau minima become material independent, in a kind of ''quasiuniversality.'' The scaled minima in N{sub OP}-dimensional order-parameter space, fall at the center and at the N{sub V} corners, of a transition-specific polyhedron inscribed in a sphere, whose radius is unity at transition. The ''polyhedra'' for the four 3D transitions are, respectively, a line, a triangle, a tetrahedron, and a hexagon. We minimize the n terms harmonic in the nonorder-parameter strains, by substituting solutions of the ''no dislocation'' St Venant compatibility constraints, and explicitly obtain power-law anisotropic, order-parameter interactions, for all transitions. In a reduced discrete-variable description, the competing minima of the Landau free energies induce unit-magnitude pseudospin vectors, with N{sub V}+1 values, pointing to the polyhedra corners and the (zero-value) center. The total scaled free energies then become Z{sub N{sub V+1}} clocklike pseudospin Hamiltonians, with temperature-dependent local Landau terms, nearest-neighbor Ginzburg couplings, and power-law St Venant interactions that drive the elastic domain-wall texturing. The scaled free energies can be used in relaxational or underdamped dynamic simulations to study ferroelastic strain textures and their dynamical evolution pathways. The pseudospin models can similarly be studied via local meanfield treatments and Monte Carlo simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Paraniso 1.0: 3-D Full Waveform Seismic Simulation in General Anisotropic Media

Many geologic materials and minerals are seismically anisotropic, with the most general anisotropic material having up to 21 independent elastic coefficients. This report outlines the development of a 3-D, generally anisotropic, linear elastic full waveform finite-difference solver. First, a mathematical description of the solution equations will be described. The finite-difference implementation of these equations will then be shown. Finally, a comparison of results from this new solver to other solutions will be provided as verification that the new algorithm can accurately replicate these solutions.

58 GEOSCIENCES↗

Estimation of elastic properties of an additively manufactured lattice using resonant ultrasound spectroscopy

Development of improved approaches in the characterization of additively manufactured structures continues to be a topic of interest for the advanced manufacturing community. This article will investigate an approach using resonant ultrasound spectroscopy (RUS) to determine the effective elastic constants of an orthotropic lattice structure. The evaluation is performed on a cube shaped 316 L stainless steel test specimen, constructed using selective laser melting techniques. The approach uses RUS techniques in conjunction with the assumption that in the frequency regime of interest, the wavelength of the diagnostic ultrasound is greater than the discrete structural features of the unit cell of the lattice; thus, the AM structure can be treated as an anisotropic continuum with effective material properties and symmetry inherited from the unit cell. The RUS analysis estimates the nine elastic coefficients associated with orthotropic sample symmetry, which, in turn, are used to determine the elastic moduli and Poisson ratios. Current results show good agreement between experiments and modeled data. Comparisons to published results are also in good agreement, indicating the potential applicability of this characterization technique for estimating the linear elastic properties of innovative additive manufactured metal lattice structures.

36 MATERIALS SCIENCE↗

Characterization of Directional Elastoplastic Properties of Al/Cu Bimetallic Sheet

The paper presents the results of the study aimed at determining the elastoplastic properties of an Al/Cu bimetallic sheet consisting of aluminum and copper layers, which were joined by cold rolling. The values of elasticity coefficients in three orthotropic planes as well as the Kirchhoff modulus, and coefficient of internal friction in the perpendicular direction to the lamination were determined. The subjects of the analysis were also the values of limit stresses, uniform energy of elastic and plastic strain per unit volume, and coefficients of the hardening curve and normal anisotropy. The tests were carried out on bimetallic specimens with varying thicknesses of the copper layer, cut from the Al/Cu sheet in the direction of rolling and in the direction perpendicular to it. Two methods of determining the directional values of mechanical parameters were used in the tests, i.e., the uniaxial quasi-static tensile test and the dynamic acoustic resonance method. It was concluded that these methods made it possible to determine directional elastoplastic properties of the Al/Cu bimetallic sheet taking into account the variable share of components in the bimetal and the direction of cutting out specimens from cold-rolled sheet.

36 MATERIALS SCIENCE↗

On the grade consistent theories of micromorphic elastic solids

For the investigation of specific nonlocal phenomena the second-order displacement gradient has been added to the independent constitutive variables used in the classical theories of elastic solids. In this paper we outline the hystorical development of the subject and present a nonlinear grade consistent theory of micromorphic elastic solids in which the independent constitutive variables are the deformation gradient, the second-order displacement gradient, microdeformation tensor, and microdeformation gradient. Then, we present the linearized theory and establish a uniqueness result with no definiteness assumption on the elastic coefficients. The theory is used to obtain the basic eqations of a grade consistent theory of microstretch elastic bodies. The field equations for an isotropic and homogeneous elastic body are presented. A counterpart of the Cauchy-Kowalevski-Somigliana solution of the classical elastodynamics is established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MechElastic: A Python library for analysis of mechanical and elastic properties of bulk and 2D materials

We report the MechElastic Python package evaluates the mechanical and elastic properties of bulk and 2D materials using the elastic coefficient matrix ( C ij ) obtained from any ab-initio density-functional theory (DFT) code. The current version of this package reads the output of VASP, ABINIT, and Quantum Espresso codes (but it can be easily generalized to any other DFT code) and performs the appropriate post-processing of elastic constants as per the requirement of the user. This program can also detect the input structure's crystal symmetry and test the mechanical stability of all crystal classes using the Born-Huang criteria. Various useful material-specific properties such as elastic moduli, longitudinal and transverse elastic wave velocities, Debye temperature, elastic anisotropy, 2D layer modulus, hardness, Pugh's ratio, Cauchy's pressure, Kleinman's parameter, and Lame's coefficients, can be estimated using this program. Another existing feature of this program is to employ the ELATE package (2016) [29] and plot the spatial variation of several elastic properties such as Poisson's ratio, linear compressibility, shear modulus, and Young's modulus in three dimensions. Further, the MechElastic package can plot the equation of state (EOS) curves for energy and pressure for a variety of EOS models such as Murnaghan, Birch, Birch-Murnaghan, and Vinet, by reading the inputted energy/pressure versus volume data obtained via numerical calculations or experiments. This package is particularly useful for the high-throughput analysis of elastic and mechanical properties of materials.

2D materials↗

Pressure Dependences of Elastic Constants of AMg6 Aluminum–Magnesium Alloy and n-AMg6/С{sub 60} Nanocomposite Alloy

The ultrasonic study results for dependence of the elastic wave velocities and second-order elasticity coefficients of the polycrystalline aluminum alloy AMg6 and its nanocomposite n-AMg6/C{sub 60} on hydrostatic pressure up to 1.6 GPa have been described. The ultrasonic research has been carried out using a highpressure ultrasonic piezometer based on the piston-cylinder device. The pressure derivatives of the secondorder elastic constants of these materials established in the present study have been compared with the results of the third-order elastic constants measurements of the test alloys using the Thurston–Brugger method. Involving available literature data, we determined the relationships between the pressure derivatives of the second-order elastic constants of the AMg6 alloy and the Mg-content and nanostructuring.

36 MATERIALS SCIENCE↗

Effect of nanostructuring on the elastic properties of aluminum alloy AMg6

We experimentally investigated the nanostructuring effect on the elastic properties of aluminum alloy AMg6 (Al–Mg–Mn system). The n-AMg6 nanostuctured specimens were prepared from a commercial polycrystalline alloy by refining and homogenizing a mixture of small chips of the alloy in a planetary mill. The resulting product consists of 200-500-micron agglomerates of nanoparticles with average nanoparticle size ∼ 40–60 nanometer according to the X-ray analysis. The compacted nanopowder was extruded at a temperature of 300°C with a reduction of cross-sectional area at least 4 times to 90 mm diameter. High resolution transmission electron microscopy studies confirmed the presence of the nanostructure with a grain size of ∼60 nanometers. For the experiments, nine parallelepiped shape specimens of 20×20×40 mm{sup 3} size were cut from the central and peripheral parts of the n-AMg6 rod. We measured of the second-order and third-order elastic coefficients of the obtained samples by ultrasonic method. The same measurements were made on specimens of the primary AMg6 alloy for comparison.

36 MATERIALS SCIENCE↗

The bonding, charge distribution, spin ordering, optical, and elastic properties of four MAX phases Cr{sub 2}AX (A = Al or Ge, X = C or N): From density functional theory study

In this work, we assess a full spectrum of properties (chemical bonding, charge distribution, spin ordering, optical, and elastic properties) of Cr{sub 2}AC (A = Al, Ge) and their hypothetical nitride counterparts Cr{sub 2}AN (A = Al, Ge) based on density functional theory calculations. The calculated total energy values indicate that a variety of spin ordering of these four compounds depending on interlayer-interactions between M-A and M-X within the sublattice, which is supported by bonding analysis. MAX phase materials are discovered to possess exotic magnetic properties which indicates that these materials could serve as promising candidates for novel layered magnetic materials for various electronic and spintronic applications. Further analysis of optical properties for two polarization vectors of Cr{sub 2}AX shows that the reflectivity is high in the visible-ultraviolet region up to ∼15 eV suggesting Cr{sub 2}AX as a promising candidate for use as a coating material. The elastic coefficients (C{sub ij}) and bulk mechanical properties [bulk modulus (K), shear modulus (G), Young's modulus (E), Poisson's ratio (η), and Pugh ratio (G/K)] of these four Cr{sub 2}AX compounds are also calculated and analyzed, which pave the way to predict or design new MAX phases that are less brittle or tougher by having a lower G/K value or higher η.

36 MATERIALS SCIENCE↗

Experimental determination of the complex stiffness tensor and Euler angles in anisotropic media using ultrasonic waves

The aim of this work is to measure the complex elastic tensor and Euler angles in very complex anisotropic media like austenitic steel welds, by inverse problem resolution from experimental data. The obtained experimental characteristics of the anisotropic material will be injected in a FE code developed by EDF enabling the simulation of an actual ultrasonic NDE of welds. The present work aims to provide reliable input data to the 3D future development of the code. In particular, this complex elastic tensor will allow to predict by modeling beam skewing ant attenuation in an austenitic weld. The investigation of such anisotropic media is very complex because of the directional dependency of the elastic stiffness tensor. Then we will discuss the use of a hybrid genetic algorithm to overcome this difficulty. The identification method is based on waveforms spectra reconstruction associated to a physical model describing wave propagation in plates, during underwater measurements. The entire procedure is qualified and validated using simulated data. Moreover, a comparison of the estimated elastic coefficients with literature values and ultrasonic measurements obtained in transmission is also given, at the end of the paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Different temperature scaling of strain-induced magneto-crystalline anisotropy and Gilbert damping in Co{sub 2}FeAl film epitaxied on GaAs

The temperature dependence of the Gilbert damping and magnetic anisotropy are investigated in L2{sub 1} Co{sub 2}FeAl films epitaxially grown on GaAs (001) substrate by the time resolved magneto-optical Kerr effect. We found that the in-plane biaxial anisotropy increases by more than 90% with the temperature decreasing from 300 K to 80 K, which is mainly due to the strong variation of the magneto-elastic coefficients. In contrast, the intrinsic Gilbert damping rises only about 10%, which is mainly attributed to the reduction of the electron phonon scattering rate, independent of the strain-induced spin-orbit coupling energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependent magnetic anisotropy of epitaxial Co{sub 2}FeAl films grown on GaAs

Co{sub 2}FeAl films with different thickness were prepared at different temperature by molecular beam epitaxy. Their magnetic anisotropy was studied by rotating magneto-optical Kerr rotation measurements under different temperature. It is found that the cubic anisotropy depends only on the temperature-dependent fourth order magneto-elastic coefficients. However, the results of growth and measurement temperature-dependent uniaxial anisotropy suggest that the uniaxial anisotropy of Co{sub 2}FeAl films may be attributed to contributions from both shear strain and anisotropic interfacial bonding. Our experimental findings proposed a new point of view to understand the origin of magnetic anisotropy in ferromagnet/GaAs(001) heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structures and physical properties of Na 2 O doped silicate glass

Ab initio molecular dynamics has been applied to construct seven sodium silicate glass models with Na2O concentration ranging from 0 to 50 mol. %. The structures of the simulated (Na 2 O) x (SiO 2 ) 1-x glasses are critically analyzed and validated by comparing with available experimental data. Because the initial seed model is based on a near-perfect continuous random network model for amorphous SiO 2 with periodic boundaries, the structures of these silicate glasses are highly reliable. The electronic structure, interatomic bonding, and the mechanical and optical properties of seven models are calculated using the first-principles density functional method. In particular, a single quantum mechanical metric, the total bond order density (TBOD), is used to characterize the internal cohesion of sodium silicate glass. This is a significant step beyond the traditional analysis of glasses based purely on the geometric parameters. The TBOD value is found to decrease with increasing Na content, indicating the destruction of silica network connectivity. The calculated mass density and refractive index increase with x are in good agreement with experiment. The elastic coefficients and bulk mechanical properties exhibit a nonlinear variation in the series and depend greatly on the internal bonding and cohesion of the glass. The calculated Poisson's ratio indicates that the glass becomes more ductile with the addition of Na 2 O. Our results indicate that sodium silicate glass tends to be unstable for x greater than 0.4 due to the total destruction of the SiO 2 network.

36 MATERIALS SCIENCE↗

Deaging and Asymmetric Energy Landscapes in Electrically Biased Ferroelectrics

In ferroic materials, the dielectric, piezoelectric, magnetic, and elastic coefficients are significantly affected by the motion of domain walls. This motion can be described as the propagation of a wall across various types and strengths of pinning centers that collectively constitute a force profile or energetic landscape. Biased domain structures and asymmetric energy landscapes can be created through application of high fields (such as during electrical poling), and the material behavior in such states is often highly asymmetric. In some cases, this behavior can be considered as the electric analogue to the Bauschinger effect. The present Letter uses time-resolved, high-energy x-ray Bragg scattering to probe this asymmetry and the associated deaging effect in the ferroelectric morphotropic phase boundary composition 0.36BiScO{sub 3}-0.64PbTiO{sub 3}.

Tutuncu, Goknur↗