Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrochemical storage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Stretchable electrochemical energy storage devices

The increasingly intimate contact between electronics and the human body necessitates the development of stretchable energy storage devices that can conform and adapt to the skin. Therefore, the development of stretchable batteries and supercapacitors has received significant attention in recent years. This review provides an overview of the general operating principles of batteries and supercapacitors and the requirements to make these devices stretchable. The following sections provide an in-depth analysis of different strategies to convert the conventionally rigid electrochemical energy storage materials into stretchable form factors. Namely, the strategies of strain engineering, rigid island geometry, fiber-like geometry, and intrinsic stretchability are discussed. A wide range of materials are covered for each strategy, including polymers, metals, and ceramics. By comparing the achieved electrochemical performance and strain capability of these different materials strategies, we allow for a side-by-side comparison of the most promising strategies for enabling stretchable electrochemical energy storage. The final section consists of an outlook for future developments and challenges for stretchable supercapacitors and batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Chemical Heterointerface Engineering on Hybrid Electrode Materials for Electrochemical Energy Storage

Abstract The chemical heterointerfaces in hybrid electrode materials play an important role in overcoming the intrinsic drawbacks of individual materials and thus expedite the in‐depth development of electrochemical energy storage. Benefiting from the three enhancement effects of accelerating charge transport, increasing the number of storage sites, and reinforcing structural stability, the chemical heterointerfaces have attracted extensive interest and the electrochemical performances of hybrid electrode materials have been significantly optimized. In this review, recent advances regarding chemical heterointerface engineering in hybrid electrode materials are systematically summarized. Especially, the intrinsic behaviors of chemical heterointerfaces on hybrid electrode materials are refined based on built‐in electric field, van der Waals interaction, lattice mismatch and connection, electron cloud bias and chemical bond, and their combination. The strategies for introducing chemical heterointerfaces are classified into in situ local transformation, in situ growth, cosynthesis, and other strategy. The recent progress about the chemical heterointerfaces engineering specially focusing on metal‐ion batteries, supercapacitors, and Li–S batteries are introduced in detail. Furthermore, the classification and characterization of chemical heterointerfaces are briefly described. Finally, the emerging challenges and perspectives about future directions of chemical heterointerface engineering are proposed.

Li, Wenbin↗
DOE OSTI2020

Electrode material–ionic liquid coupling for electrochemical energy storage

The development of new electrolyte and electrode designs and compositions has led to advances in electrochemical energy-storage (EES) devices over the past decade. However, focusing on either the electrode or electrolyte separately is insufficient for developing safer and more efficient EES devices in various working environments, as the energy-storage ability is determined by the ion arrangement and charge and/or electron transfer at the electrode–electrolyte interface. Here, we assess the fundamental physicochemical and electrochemical properties at the electrode–electrolyte interfaces in Li-ion batteries and supercapacitors using safe and electrochemically stable ionic-liquid electrolytes. Key reactions and interactions at the electrode–electrolyte interface, as well as geometric constraints and temperature effects, are highlighted. Building on the fundamental understanding of interfacial processes, we suggest potential strategies for designing stable and efficient ionic-liquid-based EES devices with emerging electrode materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Operando bulk and interfacial characterization for electrochemical energy storage: Case study employing isothermal microcalorimetry and X-ray absorption spectroscopy

Abstract The global shift to electricity as the main energy carrier will require innovation in electrochemical energy storage (EES). EES systems are the key to the “electron energy economy,” minimizing losses and increasing reliability between energy supply and demand. However, steep challenges such as cost, cycle/calendar life, energy density, material availability, and safety limit widespread adoption of batteries for large-scale grid and vehicle applications. Battery innovation that meets today’s challenges will require new chemistries, which can originate from understanding charge transport phenomena at multiple time and length scales. The advancement of operando characterization can expedite this progress as changes can be observed during battery function. This article highlights progress in bulk and interfacial operando characterization of batteries. Specifically, a case study involving Fe 3 O 4 is provided demonstrating that combining X-ray absorption spectroscopy and isothermal microcalorimetry can provide real-time characterization of productive faradaic redox processes and parasitic interfacial reactions during (de)lithiation. Graphic abstract

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimal design and integration of decentralized electrochemical energy storage with renewables and fossil plants

Increasing renewable energy requires improving the electricity grid flexibility. Existing measures include power plant cycling and grid-level energy storage, but they incur high operational and investment costs. Using a systems modeling and optimization framework, we study the integration of electrochemical energy storage with individual power plants at various renewable penetration levels. Furthermore, our techno-economic analysis includes both Li-ion and NaS batteries to encompass different technology maturity levels. A California case-study indicates localized integration to be cost-effective for greater grid flexibility. Li-ion batteries can mitigate the residual demand fluctuations of small to medium-sized plants, while NaS batteries would be best-suited for larger storage with higher renewable penetration. Overall, the battery-enabled renewable integration could reduce the unmet grid demand by 75%, the renewable curtailment by 58%, and the CO 2 emission intensity by 16% while including the life cycle emissions of the battery and the renewable farm. Our scenario-based analysis also indicates that rather than replacing all fossil power plants, it is more economical to combine batteries and renewables with individual fossil plants to achieve a clean energy grid.

25 ENERGY STORAGE↗
DOE OSTI2025

Research and Development on Advanced Electrochemical Energy Storage Devices Enabling a Spectrum of Electrified Vehicles

The USABC Advanced Battery development plan had the following three focus areas: 1. Existing technology validation, implementation, and cost reduction 2. Identification of the next viable technology with emphasis on the potential to meet USABC cost and energy density goals. 3. Support high-risk, high-reward battery technology R&D The primary aim of this project was focused on the barriers that most impede wider public adoption of electrification in vehicles-cost, energy density, low-temp performance, calendar life, and improvements in abuse tolerance. The specific objectives are as follows: Cost Reduction: drive to significantly reduce battery cost to be in-line with the $\$$100/kWh or less (by the end of calendar year 2020) DOE cost goals. Additionally, goals of $\$$75/KWh were set for 2023 aligned with fast charge and some offset of energy density. Energy Density Increase: focus on improving the cell-level specific energy and energy densities to >350 watt hours per kilogram (Wh/kg) and >750Wh/L. Low Temperature Performance Increase: strive toward developments that improve the discharge power and eliminate or dramatically reduce the life limiting lithium plating associated with regenerative braking at low temperatures, during the program. Calendar Life Increase: drive to achieve a 15-year calendar life. Abuse Tolerance Improvement: strive to develop improvements in Li-ion abuse tolerance and/or development of electrochemical energy storage technologies with inherently better response to abuse circumstances. Emerging Areas: initiate new programs that address emerging technologies that arise during the contract period.

25 ENERGY STORAGE↗
DOE OSTI2020

SiO 2 Is Wasted Space in Single-Nanometer-Scale Silicon Nanoparticle-Based Composite Anodes for Li-Ion Electrochemical Energy Storage

The electrode processing conditions of silicon-based composite anodes play a pivotal role in the resulting interfacial chemical speciation and, thus, the electrochemical cycling behavior of the electrode. Systematically investigating how small chemical changes to the surface of the silicon nanoparticle (NP) affect larger, electrode-level properties is a strategy that will inform design principles to maximize electrode energy density and extend electrode lifetime. Here, we incorporate silicon nanoparticles (NPs) with an average diameter of 5.5 nm synthesized from the gas phase through a nonthermal plasma method into composite anode half-cell coin cells. We perform chemistry to functionalize the native hydride-terminated silicon NP surface with N-methylpyrrolidone (NMP) to improve slurry properties and reduce the silicon reactivity prior to composite electrode fabrication. We construct composite electrodes from these silicon NPs and observe an 86% capacity retention over 100 cycles at a rate of C/5, with an initial silicon specific capacity of 2600 mAh/g. We expose the same Si NPs to water that completely oxidizes these small-diameter NPs to SiO 2 and find that the SiO 2 NPs in the same electrode configuration exhibit no obvious lithium alloying capacity in the electrochemical potential range of lithium silicide alloy formation. As this result stands in contrast to existing literature, we provide a discussion on the origin of the discrepancies.

25 ENERGY STORAGE↗
DOE OSTI2021

Redox-Active Polymers Designed for the Circular Economy of Energy Storage Devices

Electrochemical energy storage is a keystone to support the rapid transition to a low-carbon-emission future for grid storage and transportation. While research on electrochemical energy storage devices has mostly dealt with performance improvements (energy density and power density), little attention has been paid to designing devices that can be recycled with low cost and low environmental impact. Thus, next-generation energy storage devices should also address the integration of recyclability into the device design. In this study, we demonstrate recyclable energy storage devices based on solution-processable redox-active conjugated polymers. The high electronic and ionic charge transport in these polymers enables the operation of single-phase electrodes in aqueous electrolytes with C-rates >100 with good electrochemical stability when the cell is charged to 1.2 V. Finally, we demonstrate the recyclability of these devices, achieving >85% capacity retention in each recycling step. Our work provides a framework for developing recyclable devices for sustainable energy storage technologies.

25 ENERGY STORAGE↗
DOE OSTI2022

Phase transformation and electrochemical charge storage properties of vanadium oxide/carbon composite electrodes synthesized via integration with dopamine

Abstract Chemically preintercalated dopamine (DOPA) molecules were used as both a reducing agent and a carbon precursor to prepare δ‐V 2 O 5 · n H 2 O/C, H 2 V 3 O 8 /C, VO 2 (B)/C, and V 2 O 3 /C nanocomposites via hydrothermal treatment or hydrothermal treatment followed by annealing under Ar flow. We found that the phase composition and morphology of the produced composites are influenced by the DOPA:V 2 O 5 ratio used to synthesize (DOPA) x V 2 O 5 precursors through DOPA diffusion into the interlayer region of the δ‐V 2 O 5 · n H 2 O framework. The increase of DOPA concentration in the reaction mixture led to a more pronounced reduction of vanadium and a higher fraction of carbon in the composites’ structure, as evidenced by X‐ray photoelectron spectroscopy and Raman spectroscopy measurements. The electrochemical charge storage properties of the synthesized nanocomposites were evaluated in Li‐ion cells with nonaqueous electrolytes. δ‐V 2 O 5 · n H 2 O/C, H 2 V 3 O 8 /C, VO 2 (B)/C, and V 2 O 3 /C electrodes delivered high initial capacities of 214, 252, 279, and 637 mAh g –1 , respectively. The insights provided by this investigation open up the possibility of creating new nanocomposite oxide/carbon electrodes for a variety of applications, such as energy storage, sensing, and electrochromic devices.

Materials Science↗
DOE OSTI2023

Thermal Conductivity of a Novel Salt-Hydrogel Complex as a Phase Change Material for Building Thermal Management

Use of electricity for space heating, ventilation and air conditioning in buildings may be better managed through temporary energy storage. Compared with electrochemical storage, the levelized cost of thermal energy storage systems can be lower depending on geographical location and thermophysical properties [1]. In any phase change material (PCM), the rate of absorption and release of thermal energy increases with higher thermal conductivity [2]. However, leading PCMs like paraffin waxes have thermal conductivities on the order of 0.1 W/mK. Glauber’s salt, a salt hydrate, possesses a relatively high thermal conductivity but suffers from supercooling and phase segregation. Research has shown that polymer-based composites with salt hydrates can prevent phase segregation and limit supercooling over hundreds of cycles [3] though the thermal conductivity of the composite may be reduced leading to low energy storage rates. Here, we report thermal conductivity measurements on polymer hydrogels which are stable in solutions of Glauber’s salt. To measure thermal conductivity of soft gels, we use a 3-omega method [4] where heat flows bidirectionally through a substrate below and through a gel placed on top. This suits measurements of both gels and liquids unlike transient plane heat source or transient hot wire methods. We report measurements of thermal conductivity of salt-hydrogel complexes as a function of temperature, cross-linking and salt concentration. In addition, we present modeling of thermal conductivity of sodium sulfate solutions with available theories. We finally employ polarized optical microscopy to observe inside the transparent hydrogel networks, showing that precipitating crystals may influence thermal conductivity measurements for high salt concentrations. Our thermal conductivity results combined with enthalpy of phase change, mass density and specific heat are essential to accurately design thermal storage systems for energy-efficient buildings.

composite, thermal conductivity↗
DOE OSTI2024

Oxidation‐Driven Enhancement of Intrinsic Properties in MXene Electrodes for High‐Performance Flexible Energy Storage

Abstract MXenes, a novel class of 2D materials, exhibit great potential for energy storage due to their unique layered structure and excellent electrical conductivity. However, improving the intrinsic electrochemical storage capacity of MXenes remains a significant challenge, often requiring the incorporation of other Faradaic materials. Oxidation, in particular, poses a key issue that impacts the capacity of MXene devices. In this study, controlled oxidation is employed to create nanoscale holes within MXene, transforming them into holey MXene (H‐MXene) nanosheets. These porous structures shorten ion transport distances and increase ion transport pathways, thereby significantly enhancing the electrochemical storage capacity of MXenes. The resulting H‐MXene micro‐supercapacitors (MSCs) demonstrate exceptional performance, achieving an aerial capacitance 2.5 times that of unmodified MXene electrodes, along with excellent cycling stability, retaining 91.7% of their capacitance after 10 000 cycles. Additionally, a flexible integrated system combining energy storage and sensing functionalities is developed, showcasing its scalability in self‐powered sensing applications. The incorporation of self‐healing polyurethane (PU) enables the device to retain 90% of its storage capacity after undergoing self‐healing. This study presents a novel approach for developing high‐performance MXene‐based energy storage devices and provides valuable insights into efficient ion transport and storage in 2D materials.

Cheng, Yongfa [Department of Materials Science and↗
DOE OSTI2024

Nanoengineering of 2D MBenes for energy storage applications: A review

2D transition metal borides (MBenes), a flourishing member of the 2D nanomaterial family, show great potential in a number of study areas. MBenes have received increasing attention thanks to their excellent electrical conductivity, structural and mechanical properties, and chemical stability, which have captivated researchers and sparked further exploration. Extensive theoretical and experimental investigations have unveiled its remarkable potential as electrode materials for electrochemical storage applications, making MBenes a subject of great interest. Despite the growing interest and numerous studies conducted, there is a lack of a comprehensive and systematic appraisal of MBenes' applications in electrochemical energy storage systems. Here, in light of this, firstly, we provide an overview of the current progress in the fabrication and characterization of MAB phases and MBenes. For the synthesis of MBenes, the following fabrication techniques were discussed; liquid-phase exfoliation, solid-state mechanical exfoliation, chemical vapor deposition, high-pressure chemical vapor deposition, microwave-assisted chemical etching, and ultrasound-assisted chemical etching methods. Then, we delve into the captivating potential of MBenes, specifically in the realm of energy storage applications and their role in enhancing electrochemical storage capabilities. The discussion encompasses their application in lithium-ion, lithium-sulfur, and lithium-selenide batteries, supercapacitors and other energy storage systems, providing a comprehensive perspective on their contributions to the energy landscape. Finally, a brief but significant summary of the challenges and opportunities of MBenes in practical applications was summarized. The present review provides a guide and scientific motivation for creating and developing advanced MBene-based nanomaterials, addressing the growing demand for cutting-edge energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Behind the Meter Storage for Electric Vehicle Charging, Electrochemical and Thermal Energy Storage, and Solar Photovoltaic

In response to the potentially large and irregular demand from EVs, along with changing load profiles from buildings with on-site generation, utilities are evaluating multiple options for managing dynamic loads, including time-of-use pricing, demand charges, battery storage, and curtailment of variable generation. Buildings, as well as commercial, public, and workplace EV charging operations, can use a combination of electrochemical battery storage and thermal energy storage coupled with on-site generation to manage energy costs as well as provide resiliency and reliability for EV charging and building energy loads. We are completing a behind the meter storage analysis that focuses on determining the optimal system designs and energy flows for thermal and electrochemical behind the meter storage with on-site solar photovoltaic (PV) generation enabling electric vehicle charging in various climates, building types, and utility rate structures. In completing this analysis, we have developed a tool that combines existing battery models via the System Advisor Model (SAM) and building modeling software via EnergyPlus into a single interface. This tool allows us to simulate a building with a detailed battery model to properly size the battery, thermal energy storage, and solar PV systems to maximize profit for the system owner. This also allows us to assess how the battery degrades under various supervisory control dispatch algorithms to control charging/discharging; we can also see how thermal energy storage is created and used to complement the battery to reduce thermal loads in the building. With this project, we can analyze new batteries that are designed specifically for energy storage, rather than designed to be extremely energy dense for electric vehicle applications, using battery lifetime models from other national labs and the existing SAM battery model, which has detailed lifetime and degradation parameters. We can also assess novel thermal storage technologies by integrating them into the whole building energy simulation program EnergyPlus. Because the model calls both SAM and EnergyPlus, required inputs need to be compatible for both models. These inputs include, on a high-level, the following: weather files, building and electric vehicle load profiles, electricity rate tariff information, and system cost information for the stationary battery, solar PV, and thermal storage system. The various buildings we are studying for this analysis are retail big-box grocery store, commercial office building, fleet vehicle depot and operations facility, multi-family residential, and electric vehicle charging station. For these different applications, the battery and thermal storage will be dispatched differently, and the various technologies are sized differently to optimize cost.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

In situ and operando force-based atomic force microscopy for probing local functionality in energy storage materials

Electrochemical energy storage is the key enabling component of electric vehicles and solar-/wind-based energy technologies. The enhancement of energy stored requires the detailed understanding of charge storage mechanisms and local electrochemical and electromechanical phenomena over a variety of length scales from atoms to full cells. Classical electrochemical techniques, such as voltammetry, represent the macroscopic electrochemical properties, and consequently do not allow to extract important information about local electrochemical reactions, ions adsorption, intercalations, and transport. Understanding, controlling, and tuning the local electrochemical functionalities in functional energy materials require in situ/operando techniques which limit the use of structural and functional characterization techniques that provide local information. Here, force-based atomic force microscopies (AFMs) have provided novel insights into locally probing electrochemical mechanisms on tens of nanometer and even molecular length scales and provide a viable pathway to probe electrochemical processes in situ/operando. In this review, we highlight the contributions in the development and application of force-based AFM methods to elucidate the local charge storage mechanism in a variety of energy-related materials. We will focus in particular on methods or AFM modalities in a liquid electrolyte environment.

25 ENERGY STORAGE↗
DOE OSTI2021

Lithium Metal as an Anode in Electrochemical Energy Storage

The drastic environmental and economic costs of global warming have driven the necessity to reduce, if not eliminate, a dependency on oil and gas for energy applications. Alternative clean energy reliance has been initiated as a global investment for a more sustainable future. Part of this transitional effort is focused on energy storage via a rechargeable battery. High energy density storage is necessary for utilizing non-dispatchable green energy technologies, as well in the electric transition of our vehicle fleet. Further, understanding methods of extracting, manufacturing, and recycling lithium is necessary to lessen environmental impact. Lithium metal is often considered the “Holy Grail” of battery technology, due to its high theoretical capacity (3,860 mAh/g) and low electrochemical potential (-3.04 V vs. SHE). However, parasitic reactions lead to rapid and dangerous battery failure. Therefore, determining methods of stabilizing lithium metal is paramount for the transition to a greener future.

25 ENERGY STORAGE↗
DOE OSTI2024

Topology optimization for the full-cell design of porous electrodes in electrochemical energy storage devices

In this paper, we introduce a density-based topology optimization framework to design porous electrodes for maximum energy storage. We simulate the full cell with a model that incorporates electronic potential, ionic potential, and electrolyte concentration. The system consists of three materials, namely pure liquid electrolyte and the porous solids of the anode and cathode, for which we determine the optimal placement. We use separate electronic potentials to model each electrode, which allows interdigitated designs. As a result, a penalization is required to ensure that the anode and cathode do not touch, i.e., causing a short circuit. We compare multiple 2D designs generated for different fixed conditions, e.g. material properties. A 3D design with complex channel and interlocked structure is also created. All optimized designs are far superior to the traditional monolithic electrode design with respect to energy storage metrics. We observe up to a 750% increase in energy storage for cases with slow effective ionic diffusion within the porous electrode.

25 ENERGY STORAGE↗