Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Preparation of: I. intercalative metal oxide/conductive polymer composites as electrode materials for rechargeable batteries; II. sodium rich manganese oxide hydrate with capacity for aqueous Na-ion electrochemical energy storage

The present invention is directed at intercalative metal oxide/conductive polymer composites suitable for use as electrode materials for rechargeable batteries. The composites can be prepared by agitation of the metal oxide and the conductive polymer in aqueous media. The present invention is also directed at a sodium rich layered manganese oxide hydrate prepared by annealing manganese (II, III) oxide and sodium hydroxide. The sodium rich manganese (III, IV) oxide so formed indicates an enhanced capacity for Na-ion storage suitable for the use of electrode materials for aqueous energy storage.

Xiaowei, Teng↗
DOE OSTI2024

Electrochemically-Formed Disordered Rock Salt ω-Li x V 9 Mo 6 O 40 as a Fast-Charging Li-Ion Electrode Material

Electrochemically-formed disordered rock salt compounds are an emerging class of Li-ion electrode materials for fast-charging energy storage. However, the specific factors that govern the formation process and the resulting charge storage performance are not well understood. Here, we characterize the transformation mechanism and charge storage properties of an electrochemically-formed disordered rock salt from V 9 Mo 6 O 40 (VMO). The crystal structure of VMO has similar motifs to that of α-V 2 O 5 , a well-studied analogue, but VMO has less mechanical flexibility due to additional corner-sharing octahedra in its structure. As a result, VMO undergoes a single-step transformation pathway, which we characterize through operando X-ray diffraction, and forms an unusual highly distorted lamellar microstructure, as we show with high-resolution transmission electron microscopy. The resulting Li x VMO material shows fast charging and other electrochemical characteristics and performance typical of many nanomaterials, even though the material is composed of relatively large particles.

25 ENERGY STORAGE↗
DOE OSTI2024

Silica–Derived Nanostructured Electrode Materials for ORR, OER, HER, CO 2 RR Electrocatalysis, and Energy Storage Applications: A Review**

Silica-derived nanostructured catalysts (SDNCs) are a class of materials synthesized using nanocasting and templating techniques, which involve the sacrificial removal of a silica template to generate highly porous nanostructured materials. The surface of these nanostructures is functionalized with a variety of electrocatalytically active metal and non-metal atoms. SDNCs have attracted considerable attention due to their unique physicochemical properties, tunable electronic configuration, and microstructure. These properties make them highly efficient catalysts and promising electrode materials for next generation electrocatalysis, energy conversion, and energy storage technologies. The continued development of SDNCs is likely to lead to new and improved electrocatalysts and electrode materials. This review article provides a comprehensive overview of the recent advances in the development of SDNCs for electrocatalysis and energy storage applications. It analyzes 337,061 research articles published in the Web of Science (WoS) database up to December 2022 using the keywords “silica”, “electrocatalysts”, “ORR”, “OER”, “HER”, “HOR”, “CO 2 RR”, “batteries”, and “supercapacitors”. The review discusses the application of SDNCs for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO 2 RR), supercapacitors, lithium-ion batteries, and thermal energy storage applications. It concludes by discussing the advantages and limitations of SDNCs for energy applications.

25 ENERGY STORAGE↗
DOE OSTI2021

Surface and Bulk Oxygen Kinetics of BaCo 0.4 Fe 0.4 Zr 0.2-X Y X O 3-δ Triple Conducting Electrode Materials

Triple ionic-electronic conductors have received much attention as electrode materials. In this work, the bulk characteristics of oxygen diffusion and surface exchange were determined for the triple-conducting BaCo 0.4 Fe 0.4 Zr 0.2-X Y X O 3-δ suite of samples. Y substitution increased the overall size of the lattice due to dopant ionic radius and the concomitant formation of oxygen vacancies. Oxygen permeation measurements exhibited a three-fold decrease in oxygen permeation flux with increasing Y substitution. The DC total conductivity exhibited a similar decrease with increasing Y substitution. These relatively small changes are coupled with an order of magnitude increase in surface exchange rates from Zr-doped to Y-doped samples as observed by conductivity relaxation experiments. The results indicate that Y-doping inhibits bulk O 2- conduction while improving the oxygen reduction surface reaction, suggesting better electrode performance for proton-conducting systems with greater Y substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Accelerating the discovery of battery electrode materials through data mining and deep learning models

The availability of crystalline materials databases allows for building accurate machine learning (ML) models that can accelerate the exploration of materials chemical space for energy storage applications. In this work, we screen all inorganic materials included in the Materials Project and AFLOW databases as potential metal-ion battery electrodes. We develop an efficient protocol to mine and screen raw data in current databases and provide a new database of electrode materials by considering pairs of charged and discharged electrodes. This effort leads to a new database with over 190,000 instances, in contrast to the original battery database which contains about 5000. The expanded battery data set is then used to build regression-based deep neural network models for predicting average voltages and percentage volume changes upon charging and discharging, which present improvements of at least 28% for target properties with respect to previous models, and are now able to predict anode electrodes (low voltage region) as well as electrodes that will not work in electrochemical cells (negative voltages), overcoming the challenges identified in previous ML models for battery electrodes. Additionally, a further screening of the expanded database itself allowed us to identify 35 novel electrode candidates with excellent battery performance metrics.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrode material–ionic liquid coupling for electrochemical energy storage

The development of new electrolyte and electrode designs and compositions has led to advances in electrochemical energy-storage (EES) devices over the past decade. However, focusing on either the electrode or electrolyte separately is insufficient for developing safer and more efficient EES devices in various working environments, as the energy-storage ability is determined by the ion arrangement and charge and/or electron transfer at the electrode–electrolyte interface. Here, we assess the fundamental physicochemical and electrochemical properties at the electrode–electrolyte interfaces in Li-ion batteries and supercapacitors using safe and electrochemically stable ionic-liquid electrolytes. Key reactions and interactions at the electrode–electrolyte interface, as well as geometric constraints and temperature effects, are highlighted. Building on the fundamental understanding of interfacial processes, we suggest potential strategies for designing stable and efficient ionic-liquid-based EES devices with emerging electrode materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The potential application of VS 2 as an electrode material for Mg ion battery: A DFT study

Herein, by means of first-principle calculations based on density functional theory (DFT), the electrochemical properties of monolayer VS 2 (M-VS 2 ), double-layer VS 2 (D-VS 2 ) and bulk VS 2 (B-VS 2 ) as electrode materials for Mg-ion batteries (MIBs) were comprehensively explored. The computation results reveal that Mg atom can strongly bind with the three different forms of VS 2 . All of the Mg adsorbed VS 2 systems demonstrate metallic characteristics, which indicates a good electronic conductivity. In addition, crystal orbital hamiltonian population shows that the stability of V-S bond is weakened after adsorption of Mg atom. The low diffusion barriers of Mg give rise to the high rate performance of VS 2 in MIBs. More interestingly, the three types of VS 2 display same storage ability for Mg cations, which can adsorb 0.5 Mg atoms for VS 2 , producing maximum theoretical capacity 233 mA h g -1 for MIBs. Furthermore, the average working voltages results suggest that M-VS 2 can be employed as anode materials, while D-VS 2 , B-VS 2 can be used as cathode materials for MIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrochemical generation of hexacyanoferrate and hexacyanoruthanate electroactive films at nickel electrode surfaces: A promising synthetic approach for new electrode materials in metal ion batteries and supercapacitors

Prussian blue analogues (PBAs) have been recently investigated as promising electrode materials for battery and supercapacitor applications. While most explorations have focused on PBA nanoparticles, very little attention has been focused on PBA films deposited on a metallic support. In this work, we have examined electrogenerating hexacyanoferrate (HCF) and hexacyanoruthenate (HCR) films on nickel surfaces via cyclic voltammetry. We found that the total material deposited was influenced by the metal cation present in the electrolyte solution and that, on average, the rate of deposition of the surface adsorbed/immobilized species was dependent on the species in solution. In particular, films electrogenerated in the presence of Na + and K + had the highest deposition rates. The cyclic voltammetric profiles exhibited dramatic differences depending on the cation present in the electrolyte solution. In addition, we found that all films were electrochemically irreversible in the presence of Li + and Mg 2+ containing electrolyte solutions. Further, and as a proof of concept, we modified high surface area nickel electrodes with HCF in sodium-based electrolytes, finding that these electrodes could operate reversibly at equivalent C-rates as high as 1667C.

25 ENERGY STORAGE↗
DOE OSTI2025

A simple centrifuge cell method for ex situ quantification of electrical conductivity of slurry electrode materials

We present the design, experimental procedure, and experimental evaluation of a system for fast, simple, and ex situ characterization of electrical conductivity of slurry electrode materials. The system uses a custom-designed electrochemical cell compatible with centrifugation in a swing-bucket centrifuge. The cell features cylindrical graphite electrodes that are partially sheathed so as to expose only 2 mm of the electrode surface to the bottom region of the packed particulate pellet. Also presented is a conduction model that provides a shape factor for estimating effective conductivity. We tested aqueous solutions of carbon black (CB), activated carbon (AC), and mixtures thereof. These particles were dispersed in 0.0 and 0.5 M NaCl solutions. Measurements show that the effective conductivity initially increases linearly with pellet mass and then saturates at higher masses. Notably, CB exhibited a fivefold increase in conductivity than AC at equal pellet masses. CB/AC mixtures at a fixed pellet mass were tested with CB mass fractions of 0 to 100%. Interestingly, the mixture conductivity was found to be a non-monotonic function of CB mass fraction, with a maximum conductivity at about 60 % CB mass fraction. At this maximum, the mixture conductivity is approximately 30 % higher than pure CB. NaCl concentration in the slurry solution had no effects on conductivity. These results highlight the interactions between slurry electrode composition and compaction, offering insights for optimizing slurry electrodes. Furthermore, the system and results may also be applicable to evaluation of particulate materials (including slurries) used for Li-ion batteries, capacitive deionization, fuel cells, and flow electrodes.

Capacitive deionization↗
DOE OSTI2021

Synthesis of new two-dimensional titanium carbonitride Ti 2 C 0.5 N 0.5 T x MXene and its performance as an electrode material for sodium-ion battery

Two-dimensional (2D) layered transition metal carbides/nitrides, called MXenes, are attractive alternative electrode materials for electrochemical energy storage. Owing to their metallic electrical conductivity and low ion diffusion barrier, MXenes are promising anode materials for sodium-ion batteries (SIBs). Herein, we report on a new 2D carbonitride MXene, viz ., Ti 2 C 0.5 N 0.5 T x (T x stands for surface terminations), and the only second carbonitride after Ti 3 CNT x so far. A new type of in situ HF (HCl/KF) etching condition was employed to synthesize multilayer Ti 2 C 0.5 N 0.5 T x powders from Ti 2 AlC 0.5 N 0.5 . Spontaneous intercalation of tetramethylammonium followed by sonication in water allowed for large-scale delamination of this new titanium carbonitride into 2D sheets. Multilayer Ti 2 C 0.5 N 0.5 T x powders showed higher specific capacities and larger electroactive surface area than those of Ti 2 CT x powders. Multilayer Ti 2 C 0.5 N 0.5 T x powders show a specific capacity of 182 mAh g -1 at 20 mA g -1 , the highest among all reported MXene electrodes as SIBs with excellent cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2020

Improved lithium storage capacity and high rate capability of nitrogen-doped graphite-like electrode materials prepared from thermal pyrolysis of graphene quantum dots

Adopting a solid-phase microwave-assisted technique followed by thermal pyrolysis of N-functionalized graphene quantum dots, novel nitrogen-doped graphite-like (NGL) electrode materials were synthesized in this work and served as the anode for Li-ion batteries. The NGL anode demonstrated reversible capacity of 530 mAh g -1 at 0.1C, superior rate capability at high C rate operation (420 mAh g -1 at 5C), remarkable initial coulombic efficiency (>95.7%), and excellent cyclic stability along with high efficiency (>99.1%) during entire cycling. The NGL anode nanostructure enables improved lithium ion mobility and reversible Li + storage during cycling. The analysis of the Ragone plots revealed that the specific energy of NGL anode reaches to ca. 840 Wh kg -1 at the power density of 4200 W kg -1 . The diffusion coefficient of Li ions was measured as 1.69 × 10 -9 cm 2 s -1 for the NGL anode material, substantially improving over commonly used graphite electrodes (15–26 times higher Li + diffusivity). The high-rate cyclability as well as the cyclic stability of the NGL anodes were also confirmed via long-term cycling of full pouch cells assembled with ternary cathode and NGL anode. The robust design of the NGL anode materials introduced in this work, paves the way for designing next-generation lithium-ion batteries operating at ultra-high C rates.

25 ENERGY STORAGE↗
DOE OSTI2025

A layered Prussian blue analogue as fast-charging negative electrode material for lithium-ion batteries

The simultaneous achievement of fast-charging and high specific capacity remains a critical challenge for lithium-ion battery negative electrodes. Here we report a layered manganese-based Prussian blue analogue, synthesized through vacancy control and subsequent thermal transformation. As a conversion-type negative electrode, this material exhibits high-rate performance, delivering a specific capacity of 510 mAh g −1 at a specific current of 8 A g −1 , and operates at a moderate average voltage of approximately 1.2 V vs. Li/Li + , which mitigates lithium plating risks. This high-rate capability stems from the analogue’s specific linkage configurations, which facilitate a high content of active transition metal and strong Li+ adsorption at nitrogen sites. The high transition metal content enables a high reversible capacity, while strong Li + adsorption promotes an efficient initial crystalline-to-amorphous transformation. This process induces dynamically reversible component migration during subsequent cycling, thereby enhancing conversion reaction kinetics. Our findings provide insights into the application of Prussian blue analogues as fast-charging negative electrode materials. The development of fast-charging and high-capacity negative electrodes is critical for advanced lithium-ion batteries. Here, authors use a vacancy engineering strategy to develop a layered Prussian blue analogue with competitive rate capability, delivering a specific capacity of 510 mAh g −1 at a specific current of 8 A g −1 .

25 ENERGY STORAGE↗
DOE OSTI2020

Developing Novel Electrode Materials for Aqueous Battery

Aqueous rechargeable batteries (ARBs) are particularly interesting for large-scale energy storage due to their inherent safety, superior rate capability and environmental friendliness. However, ARBs are not widely explored as yet, so we proposed designing, preparing, and testing new intercalation materials for ARBs. Development of these electrodes will enrich the electrode chemistry of existing ARBs, open up new avenues for high-performance electrode and system design, offer opportunities to improve energy efficiency of water purification, and inform future development of controls strategies and management systems for stationary aqueous energy storage. Researchers from Bosch and LBNL collaborated on relevant materials to pursue and the general design of experiments to implement. Bosch researchers prepared and fabricated the electrodes and used various characterization facilities at LBNL to evaluate electrode performance in-device. The research collaboration resulted in identifying electrode materials capable of Na + and Ca 2+ intercalation in aqueous systems, and their application for desalination was explored using testing platform available at LBNL. Besides the specific materials and their performance, the data collected during the study was also used to inform a broader techno-economic analysis to compare intercalation-desalination technique to commercially available capacitive desalination approach. Outcomes of this research effort will be published in peer-reviewed journals.

25 ENERGY STORAGE↗
DOE OSTI2022

Extreme Fast Charging: Effect of Positive Electrode Material on Crosstalk

Extreme fast charging (XFC) is a key requirement for the adoption of battery-based electric vehicles by the transportation sector. However, XFC has been shown to accelerate degradation, causing the capacity, life, and safety of batteries to deteriorate. We tested cells containing five positive electrode chemistries, LFP (olivine structure), LMO (spinel), LCO (layered), NMC811 (layered) and NCA (layered), using fast-charging protocols. After testing, the negative electrodes from cells containing positive electrodes crystallizing with a layered structure were found to have more lithium deposited on their surfaces. Further, those crystallizing with a layered structure also tended to have a larger increase in impedance than those crystallizing with a spinel or olivine structure. Characterization of the negative electrodes by X-ray photoelectron spectroscopy showed that using the concentrations of LiF and Li x PO y F z as metrics, the concentration of LiF in the SEI from the cell with different positive electrodes is LFP > LMO > LCO ~ NMC811 > NCA; and for Li x PO y F z , the order is LMO > LFP > NCA > NMC811 > LCO. Clearly, the positive-electrode material was influencing the amounts of these materials formed.

25 ENERGY STORAGE↗
DOE OSTI2020

Production of levulinic acid and biocarbon electrode material from corn stover through an integrated biorefinery process

To overcome the inefficient biomass conversion, waste generation, and lack of co-production in biorefineries, an integrated process was proposed for the conversion of corn stover into levulinic acid and biocarbon electrode material. Corn stover was pretreated through hydrothermal process using 0.45 wt% K 2 CO 3 which removed 76 wt% lignin and 85 wt% xylan while preserving 83 wt% glucan. This was followed by acid hydrolysis to produce levulinic acid at varying H 2 SO 4 concentrations and reaction time in a batch reactor at 190 °C. At a reaction time of 5 min in 2 wt% H 2 SO 4 , 35.8 wt% and 30 wt% glucan in raw and pretreated corn stover was converted to levulinic acid, respectively. The residue from acid hydrolysis was converted into biocarbon for supercapacitor electrodes via a two-step thermal activation process which showed a specific capacitance of 120 F g -1 . The proposed integrated biorefinery concept provides multiple value-added products for a greater financial and environmental sustainability.

09 BIOMASS FUELS↗
DOE OSTI2024

Combining 3D printing of copper current collectors and electrophoretic deposition of electrode materials for structural lithium-ion batteries

Serving as a proof of concept, additive manufacturing and electrophoretic deposition are leveraged in this work to enable structural lithium-ion batteries with load-bearing and energy storage dual functionality. The preparation steps of a complex 3D printed copper current collector, involving the formulation of a photocurable resin formulation, as well as the vat photopolymerization process followed by a precursors-based solution soaking step and thermal post-processing are presented. Compression and microhardness testing onto the resulting 3D printed copper current collector are shown to demonstrate adequate mechanical performance. Electrophoretic deposition of graphite as a negative electrode active material and other additives was then performed onto the 3D printed copper collector, with the intention to demonstrate energy storage functionality. Half-cell electrochemical cycling of the 3D multi-material current collector/negative electrode versus lithium metal finally demonstrates that structural battery components can be successfully obtained through this approach.

25 ENERGY STORAGE↗
DOE OSTI2023

Doping strategy for layered oxide electrode materials used in lithium-ion batteries

The present invention features a new way of doping layered cathode materials in lithium ion batteries. Using a “high entropy” doping strategy, more than four impurity elements can be introduced to the host materials. The present invention applies this high entropy doping strategy to a high nickel content layered oxide material and a lithium-manganese rich material. This new high entropy doping strategy allows the layered oxide materials used in the positive electrode of lithium ion battery to achieve high energy density, long life cycle and reduced reliance on the expensive and toxic cobalt, all of which are desired attributes for improving the performance of lithium ion batteries and reducing their cost.

Xin, Huolin↗