Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Temperature dependence of ballistic mobility in a metamorphic InGaAs/InAlAs high electron mobility transistor

We have investigated the temperature dependence of ballistic mobility in a 100 nm-long InGaAs/InAlAs metamorphic high-electron-mobility transistor designed for millimeter-wavelength RF applications. To extract the temperature dependence of quasi-ballistic mobility, our experiment involves measurements of the effective mobility in the low-bias linear region of the transistor and of the collision-dominated Hall mobility using a gated Hall bar of the same epitaxial structure. The data measured from the experiment are consistent with that of modeled ballistic mobility based on ballistic transport theory. These results advance the understanding of ballistic transport in various transistors with a nano-scale channel length that is comparable to the carrier's mean free path in the channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing the Electron Mobility via Delta-Doping in SrTiO3

We fabricated high-mobility {delta}-doped structures in SrTiO{sub 3} thin films in order to investigate the low temperature electronic transport properties of confined carriers in this system. An enhancement of the electron mobility above the bulk value was observed as the doped layer thickness decreased. High-field Hall measurements revealed that this mobility enhancement originates from higher-mobility electrons in the undoped clean regions, which have quantum-mechanically broadened from the doped layer. Because of the absence of apparent lattice misfit between the layers, this structure is highly suitable for investigating two-dimensional electron gases in SrTiO{sub 3}

36 MATERIALS SCIENCE↗

Heavy ion irradiation effects on GaN/AlGaN high electron mobility transistor failure at off-state

We investigate the effects of ion irradiation on AlGaN/GaN high electron mobility electron transistors using in-situ transmission electron microscopy. The experiments are performed inside the microscope to visualize the defects, microstructure and interfaces of ion irradiated transistors during operation and failure. Here, experimental results indicate that heavy ions such as Au 4+ can create a significant number of defects such as vacancies, interstitials and dislocations in the device layer. It is hypothesized that these defects act as charge traps in the device layer and the resulting charge accumulation lowers the breakdown voltage. Sequential energy dispersive X-ray spectroscopy mapping allows us to track individual chemical elements during the experiment, and the results suggest that the electrical degradation in the device layer may originate from oxygen and nitrogen vacancies.

36 MATERIALS SCIENCE↗

Influence of buffer-layer construction and substrate orientation on the electron mobilities in metamorphic In{sup 0.70}Al{sup 0.30}As/In{sup 0.76}Ga{sup 0.24}As/In{sup 0.70}Al{sup 0.30}As structures on GaAs substrates

The influence of construction of the buffer layer and misorientation of the substrate on the electrical properties of In{sup 0.70}Al{sup 0.30}As/In{sup 0.76}Ga{sup 0.24}As/In{sup 0.70}Al{sup 0.30}As quantum wells on a GaAs substrate is studied. The temperature dependences (in the temperature range of 4.2 K < T < 300 K) and field dependences (in magnetic fields as high as 6 T) of the sample resistances are measured. Anisotropy of the resistances in different crystallographic directions is detected; this anisotropy depends on the substrate orientation and construction of the metamorphic buffer layer. In addition, the Hall effect and the Shubnikov–de Haas effect are studied. The Shubnikov–de Haas effect is used to determine the mobilities of electrons separately in several occupied dimensionally quantized subbands in different crystallographic directions. The calculated anisotropy of mobilities is in agreement with experimental data on the anisotropy of the resistances.

36 MATERIALS SCIENCE↗

Mechanical flip-chip for ultra-high electron mobility devices

In this study, electrostatic gates are of paramount importance for the physics of devices based on high-mobility two-dimensional electron gas (2DEG) since they allow depletion of electrons in selected areas. This field-effect gating enables the fabrication of a wide range of devices such as, for example, quantum point contacts (QPC), electron interferometers and quantum dots. To fabricate these gates, processing is usually performed on the 2DEG material, which is in many cases detrimental to its electron mobility. Here we propose an alternative process which does not require any processing of the 2DEG material other than for the ohmic contacts. This approach relies on processing a separate wafer that is then mechanically mounted on the 2DEG material in a flip-chip fashion. This technique proved successful to fabricate quantum point contacts on both GaAs/AlGaAs materials with both moderate and ultra-high electron mobility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Aromatic Solvents Residuals on Electron Mobility of Organic Single Crystals

Balanced electron and hole transport properties are essential for various organic electrical/optoelectrical applications such as organic solar cells, complementary circuits, and light-emitting transistors. However, the electron transport in organic semiconductor lags far behind the hole side, making it with vital significance to seek the factors that limit the electron mobility. Here, the authors demonstrate that the π-conjugated solvents, as essential components in the widely-used solution processing techniques, can significantly suppress the electron transport if they are not properly removed and trapped as residuals. Single crystals of typical p-type materials exhibit a transition from p-type behavior to ambipolar conductance via reducing the amount of solvent residuals, and the same effect is confirmed by varied p-type materials and solvents. The highest electron mobility reaches 0.027 cm 2 V –1 s –1 and 0.029 cm 2 V –1 s –1 for 6,13-bis(triisopropylsilylethynyl)pentacene and 5,15-bis(triisopropylsilylethynyl)tetrabenzoporphyrin, respectively. Finally, this work discloses the non-negligible existence of solvent residuals even in high quality, long-range ordered organic single crystals, and further provides efficient strategies to harvest the n-type behaviors of organic semiconductor materials.

36 MATERIALS SCIENCE↗

Synergistic Use of Pyridine and Selenophene in a Diketopyrrolopyrrole‐Based Conjugated Polymer Enhances the Electron Mobility in Organic Transistors

Abstract To achieve semiconducting materials with high electron mobility in organic field‐effect transistors (OFETs), low‐lying energy levels (the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO)) and favorable molecular packing and ordering are two crucial factors. Here, it is reported that the incorporation of pyridine and selenophene into the backbone of a diketopyrrolopyrrole (DPP)‐based copolymer produces a high‐electron‐mobility semiconductor, PDPPy‐Se. Compared with analogous polymers based on other DPP derivatives and selenophene, PDPPy‐Se features a lower LUMO that can decrease the electron transfer barrier for more effective electron injection, and simultaneously a lower HOMO that, however, can increase the hole transfer barrier to suppress the hole injection. Combined with thermal annealing at 240 °C for thin film morphology optimization to achieve large‐scale crystallite domains with tight molecular packing for effective charge transport along the conducting channel, OFET devices fabricated with PDPPy‐Se exhibit an n‐type‐dominant performance with an electron mobility (μ e ) as high as 2.22 cm 2 V −1 s −1 and a hole/electron mobility ratio (μ h /μ e ) of 0.26. Overall, this study demonstrates a simple yet effective approach to boost the electron mobility in organic transistors by synergistic use of pyridine and selenophene in the backbone of a DPP‐based copolymer.

Liu, Qian↗

Scattering and electron mobility in combination-doped HFET-structures AlGaAs/InGaAs/AlGaAs with high electron density

Molecular-beam epitaxy is used for growing structures differing in doping technique and doping level and having a high two-dimensional-electron concentration n{sub s} in the quantum well. The effect of doping combining uniform and {delta} doping on the electron-transport properties of heterostructures is investigated. A new type of structure with a two-sided silicon {delta} doping of GaAs transition layers located on the quantum-well boundaries is proposed. The largest value of electron mobility {mu}{sub H} = 1520 cm{sup 2}/(V s) is obtained simultaneously with a high electron density n{sub s} = 1.37 Multiplication-Sign 10{sup 13} cm{sup -2} at 300 K with such a doping. It is associated with decreasing electron scattering by an ionized impurity, which is confirmed by the carried out calculations.

36 MATERIALS SCIENCE↗

Enhancement of electron mobility in asymmetric coupled quantum well structures

We study the low temperature multisubband electron mobility in a structurally asymmetric GaAs/Al{sub x}Ga{sub 1-x}As delta doped double quantum well. We calculate the subband energy levels and wave functions through selfconsistent solution of the coupled Schrodinger equation and Poisson's equation. We consider ionized impurity scattering, interface roughness scattering, and alloy disorder scattering to calculate the electron mobility. The screening of the scattering potentials is obtained by using static dielectric response function formalism within the random phase approximation. We analyze, for the first time, the effect of asymmetric structure parameters on the enhancement of multisubband electron mobility through intersubband interactions. We show that the asymmetric variation of well width, doping concentration, and spacer width considerably influences the interplay of scattering mechanisms on mobility. Our results of asymmetry induced enhancement of electron mobility can be utilized for low temperature device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron mobility and drift velocity in selectively doped InAlAs/InGaAs/InAlAs heterostructures

An increase in the electron mobility and drift velocity in high electric fields in quantum wells of selectively doped InAlAs/InGaAs/InAsAs heterostructures is obtained experimentally via controlling the composition of semiconductors forming the interface. The electron mobility at the interface in the In{sub 0.8}Ga{sub 0.2}As/In{sub 0.7}Al{sub 0.3}As metamorphic structure with a high molar fraction of In (0.7-0.8) is as high as 12.3 Multiplication-Sign 10{sup 3} cm{sup 2} V{sup -1} s{sup -1} at room temperature. An increase in the electron mobility by a factor of 1.1-1.4 is attained upon the introduction of thin (1-3 nm) InAs layers into a quantum well of selectively doped In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As heterostructures. A maximal drift velocity attains 2.5 Multiplication-Sign 10{sup 7} cm/s in electric fields of 2-5 kV/cm. The threshold field F{sub th} for the intervalley {Gamma}-L electron transfer (the Gunn effect) in the InGaAs quantum well is higher than in the bulk material by a factor of 2.5-3. The effect of two- to threefold decrease in the threshold field F{sub th} in the InGaAs quantum well is established upon increasing the molar fraction of In in the InAlAs barrier, as well as upon the introduction of thin InAs inserts into the InGaAs quantum well.

36 MATERIALS SCIENCE↗

Electron tunneling spectroscopy study of electrically active traps in AlGaN/GaN high electron mobility transistors

We investigate the energy levels of electron traps in AlGaN/GaN high electron mobility transistors by the use of electron tunneling spectroscopy. Detailed analysis of a typical spectrum, obtained in a wide gate bias range and with both bias polarities, suggests the existence of electron traps both in the bulk of AlGaN and at the AlGaN/GaN interface. The energy levels of the electron traps have been determined to lie within a 0.5 eV band below the conduction band minimum of AlGaN, and there is strong evidence suggesting that these traps contribute to Frenkel-Poole conduction through the AlGaN barrier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron mobility calculation for graphene on substrates

By a semiclassical Monte Carlo method, the electron mobility in graphene is calculated for three different substrates: SiO{sub 2}, HfO{sub 2}, and hexagonal boron nitride (h-BN). The calculations account for polar and non-polar surface optical phonon (OP) scatterings induced by the substrates and charged impurity (CI) scattering, in addition to intrinsic phonon scattering in pristine graphene. It is found that HfO{sub 2} is unsuitable as a substrate, because the surface OP scattering of the substrate significantly degrades the electron mobility. The mobility on the SiO{sub 2} and h-BN substrates decreases due to CI scattering. However, the mobility on the h-BN substrate exhibits a high electron mobility of 170 000 cm{sup 2}/(V·s) for electron densities less than 10{sup 12 }cm{sup −2}. Therefore, h-BN should be an appealing substrate for graphene devices, as confirmed experimentally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electroluminescence of hot electrons in AlGaN/GaN high-electron-mobility transistors under radio frequency operation

Hot electrons in AlGaN/GaN high electron mobility transistors are studied during radio frequency (RF) and DC operation by means of electroluminescence (EL) microscopy and spectroscopy. The measured EL intensity is decreased under RF operation compared to DC at the same average current, indicating a lower hot electron density. This is explained by averaging the DC EL intensity over the measured load line used in RF measurements, giving reasonable agreement. In addition, the hot electron temperature is lower by up to 15% under RF compared to DC, again at least partially explainable by the weighted averaging along the specific load line. However, peak electron temperature under RF occurs at high V{sub DS} and low I{sub DS} where EL is insignificant suggesting that any wear-out differences between RF and DC stress of the devices will depend on the balance between hot-carrier and field driven degradation mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Features of electron mobility in a thin silicon layer in an insulator-silicon-insulator structure

Electron mobility in a thin silicon layer of a metal-insulator-semiconductor-insulator-metal system is studied as a function of longitudinal and transverse electric fields (in wide ranges of their values), temperature in the range 1.7 to 400 K, and changes in {gamma}-ray irradiation conditions. It is shown that, in the temperature range 400 to {approx}100 K, electron mobility increases in accordance with the mechanism of electron scattering at an acoustic phonon, while, with a subsequent decrease in temperature to the temperature of liquid helium, mobility drops because the Coulomb scattering of electrons at charged surface centers starts to dominate. It is demonstrated that as a result of {gamma}-ray irradiation, electron mobility decreases and the degree of this decrease strongly depends on the electrical mode of the sensor during irradiation.

36 MATERIALS SCIENCE↗

Electron mobilities in isomorphic In{sub 0.53}Ga{sub 0.47}As quantum wells on InP substrates

The influence of the doping level, illumination, and width of isomorphic In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum wells grown on InP substrates on the electron mobility is studied. The persistent photoconductivity at low temperatures is found. Band diagrams are calculated and optimal parameters are found for obtaining the maximum electron mobility. The quantum and transport electron mobilities in dimensional quantization subbands are obtained from the Shubnikov-de Haas effect. The electron mobilities are calculated in dimensional quantization subbands upon scattering by ionized impurities taking intersubband transitions into account. Scattering by ionized impurities in samples studied is shown to be dominant at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Electron Mobility Transistor Structures on Sapphire Substrates Using CMOS Compatible Processing Techniques

System-on-a-chip (SOC) processes are under intense development for high-speed, high frequency transceiver circuitry. As frequencies, data rates, and circuit complexity increases, the need for substrates that enable high-speed analog operation, low-power digital circuitry, and excellent isolation between devices becomes increasingly critical. SiGe/Si modulation doped field effect transistors (MODFETs) with high carrier mobilities are currently under development to meet the active RF device needs. However, as the substrate normally used is Si, the low-to-modest substrate resistivity causes large losses in the passive elements required for a complete high frequency circuit. These losses are projected to become increasingly troublesome as device frequencies progress to the Ku-band (12 - 18 GHz) and beyond. Sapphire is an excellent substrate for high frequency SOC designs because it supports excellent both active and passive RF device performance, as well as low-power digital operations. We are developing high electron mobility SiGe/Si transistor structures on r-plane sapphire, using either in-situ grown n-MODFET structures or ion-implanted high electron mobility transistor (HEMT) structures. Advantages of the MODFET structures include high electron mobilities at all temperatures (relative to ion-implanted HEMT structures), with mobility continuously improving to cryogenic temperatures. We have measured electron mobilities over 1,200 and 13,000 sq cm/V-sec at room temperature and 0.25 K, respectively in MODFET structures. The electron carrier densities were 1.6 and 1.33 x 10(exp 12)/sq cm at room and liquid helium temperature, respectively, denoting excellent carrier confinement. Using this technique, we have observed electron mobilities as high as 900 sq cm/V-sec at room temperature at a carrier density of 1.3 x 10(exp 12)/sq cm. The temperature dependence of mobility for both the MODFET and HEMT structures provides insights into the mechanisms that allow for enhanced electron mobility as well as the processes that limit mobility, and will be presented.

Mueller, Carl↗

Boost the electron mobility of solution-grown organic single crystals via reducing the amount of polar solvent residues

Enhancing electron transport to match with the development in hole transport is critical for organic electronics in the future. As electron motion is susceptible to extrinsic factors, seeking these factors and avoiding their negative effects have become the central challenge. Here, the existence of polar solvent residues in solution-grown single-crystals of 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene is identified as a factor detrimental to electron motion. Field-effect transistors of the crystals exhibit electron mobility boosted by about 60% after the residues are removed. The average electron mobility reaches up to 8.0 ± 2.2 cm 2 V –1 s –1 with a highest value of 13.3 cm 2 V –1 s –1 ; these results are significantly higher than those obtained previously for the same molecule (1.0–5.0 cm 2 V –1 s –1 ). Furthermore, the achieved mobility is also higher than the maximum reported electron mobility for organic materials (11 cm 2 V –1 s –1 ). As a result, this work should greatly accelerate the advancement of organic electron-transporting materials.

36 MATERIALS SCIENCE↗