Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structure, excitons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Pressure-Induced Exciton Formation and Superconductivity in Platinum-Based Mineral Sperrylite

We report a comprehensive study of Sperrylite (PtAs 2 ), the main platinum source in natural minerals, as a function of applied pressures up to 150 GPa. While no structural phase transition is detected from pressure-dependent X-ray measurements, the unit cell volume shrinks monotonically with pressure following the third-order Birch–Murnaghan equation of state. The mildly semiconducting behavior found in pure synthesized crystals at ambient pressures becomes more insulating upon increasing the applied pressure before metalizing at higher pressures, giving way to the appearance of an abrupt decrease in resistance near 3 K at pressures above 92 GPa consistent with the onset of a superconducing phase. The pressure evolution of the calculated electronic band structure reveals the same physical trend as our transport measurements, with a non-monotonic evolution explained by a hole band that is pushed below the Fermi energy and an electron band that approaches it as a function of pressure, both reaching a touching point suggestive of an excitonic state. A Lifshitz transition of the electronic structure and an increase in the density of states may naturally explain the onset of superconductivity in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitonic Anisotropy in Single‐Crystalline 2D Silver Phenylchalcogenides

2D materials exhibiting in‐plane anisotropy enable new applications in directional energy transport and polarized optical response. Silver phenylchalcogenides (AgEPh) – including mithrene (AgSePh), tethrene (AgTePh), and thiorene (AgSPh) – represent an exciting new addition to this family, with optical response spanning the visible to near‐UV. Here, excitonic anisotropy is predicted and characterized in this family of materials using a combination of ab initio theory and optical micro‐spectroscopy of single‐crystalline flakes. Using density functional theory and GW with the Bethe–Salpeter equation calculations, it is revealed that all AgEPh compounds exhibit anisotropic electronic band structure and host multiple delocalized excitons with in‐plane anisotropy. Room‐temperature polarization‐resolved optical micro‐spectroscopy shows that orthogonally polarized excitons with similar energy lead to nearly isotropic absorption in AgSPh, whereas energy separation between excitonic resonances in AgSePh and AgTePh leads to strong absorption and emission anisotropy. Cryogenic reflectance micro‐spectroscopy further reveals exciton fine structure in AgSePh, reconciling the discrepancies between room‐temperature experiments and theoretical predictions. Finally, it is demonstrated that the optical response of thicker AgEPh crystals is influenced by photonic effects arising from finite crystal size. Overall, this work advances the understanding of the relationship between anisotropic structure, composition, and excitonic properties in AgEPh, providing a foundation for technological integration.

2D↗

Light-induced electron pairing in a bilayer structure

We demonstrate the existence of doubly charged exciton states in strongly screened bilayers of transition metal dichalcogenide layers. These complexes are important because they are preformed electron pairs that can, in principle, undergo Bose–Einstein condensation, in which case they would also form a new type of superconductor, consisting of stable bosons with net charge. Our measurements include 1) continuous control of the doping density with both positive and negative carriers, showing the expected population dependencies on the free carrier density, and 2) measurement of the dependence on magnetic field, showing that this new bound state is a spin triplet. These results imply that it is promising to look for superconductivity in this system.

2D material↗

Unconventional solitonic high-temperature superfluorescence from perovskites

Fast thermal dephasing limits macroscopic quantum phenomena to cryogenic conditions and hinders their use at ambient temperatures. For electronic excitations in condensed media, dephasing is mediated by thermal lattice motion. Therefore, taming the lattice influence is essential for creating collective electronic quantum states at high temperatures. Although there are occasional reports of high-T c quantum effects across different platforms, it is unclear which lattice characteristics and electron–lattice interactions lead to macroscopically coherent electronic states in solids. Here we studied intensity fluctuations in the macroscopic polarization during the emergence of superfluorescence in a lead halide perovskite and showed that spontaneously synchronized polaronic lattice oscillations accompany collective electronic dipole emission. We further developed an effective field model and theoretically confirmed that exciton–lattice interactions lead to a new electronically and structurally entangled coherent extended solitonic state beyond a critical polaron density. The analysis shows a phase transition with two processes happening in tandem: incoherent disordered polaronic lattice deformations establish an order, while macroscopic quantum coherence among excitons simultaneously emerges. Recombination of excitons in this state culminates in superfluorescence at high temperatures. Our study establishes fundamental connections between the transient superfluorescence process observed after the impulsive excitation of perovskites and general equilibrium phase transitions achieved by thermal cooling. By identifying various electron–lattice interactions in the perovskite structure and their respective role in creating collectively coherent electronic effects in solids, our work provides unprecedented insight into the design and development of new materials that exhibit high-temperature macroscopic quantum phenomena.

36 MATERIALS SCIENCE↗

Quantum Computing Algorithms and Applications for Coherent and Strongly Correlated Chemical Systems

This project advanced quantum algorithms, quantum information theory, strongly correlated electronic structure methods, molecular quantum materials, and exciton transport imaging in coherent condensed phase systems. Across the award period, the team developed new methods for open-quantum-system simulation, Hamiltonian learning, state tomography, reduced-density-matrix and contracted-quantum eigensolver approaches, and quantum diagnostics for device capability and openness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Twist-Angle-Dependent Excitons in Moiré MoTe 2 Visualized by Cryogenic STEM and Monochromated EELS

van der Waals twisted bilayers of transition-metal dichalcogenides exhibit diverse excitonic phenomena arising from moiré superlattices and lattice reconstruction. While interlayer strain and relaxation reshape their electronic bands, their nanoscale influence on the excitonic fine structure remains poorly understood. Here, we study the interplay between spin–orbit coupling (SOC) and the moiré lattice by probing excitons in H-type twisted (∼8-layer × 8-layer) MoTe 2 using atomic-resolution scanning transmission electron microscopy (STEM) combined with monochromated electron energy loss spectroscopy (EELS) at cryogenic temperature. Spatially resolved spectra reveal moiré-site-dependent variations in excitonic absorption, including modulation of the X B exciton across the moiré unit cell. We find that SOC in MoTe 2 increases with the twist angle within the studied range (2–4.5°), with the largest value observed at 4°. Furthermore, these findings establish the twist angle as a tunable parameter for SOC via moiré engineering and link local structural relaxation to excitonic fine structure in twisted MoTe 2 .

cryogenic STEM/EELS↗

Interplay of coulomb and exciton–phonon coupling controls singlet fission dynamics in two pentacene polymorphs

Pentacene is an important model organic semiconductor in both the singlet exciton fission (SF) and organic electronics communities. We have investigated the effect of changing crystal structure on the SF process, generating multiple triplet excitons from an initial singlet exciton, and subsequent triplet recombination. Unlike for similar organic semiconductors that have strong SF sensitive to polymorphism, we find almost no quantitative difference between the kinetics of triplet pair (TT) formation in the two dominant polymorphs of pentacene. Both pairwise dimer coupling and momentum-space crystal models predict much faster TT formation from the bright singlet excited state of the Bulk vs ThinFilm polymorph, contrasting with the experiment. GW and Bethe–Salpeter equation calculations, including exciton–phonon coupling, reveal that ultrafast phonon-driven transitions in the ThinFilm polymorph compensate the intrinsically slower purely Coulomb-mediated TT formation channel, rationalizing the similarity in observed rates. Taking into account the influence of subtle structural distinctions on both the direct and phonon-mediated SF pathways reveals a predictive capability to these methods, expected to be applicable to a wide variety of molecular crystals.

14 SOLAR ENERGY↗

The Defects Genome of Janus Transition Metal Dichalcogenides

2D Janus Transition Metal Dichalcogenides (TMDs) have attracted much interest due to their exciting quantum properties arising from their unique two-faced structure, broken-mirror symmetry, and consequent colossal polarization field within the monolayer. While efforts are made to achieve high-quality Janus monolayers, the existing methods rely on highly energetic processes that introduce unwanted grain-boundary and point defects with still unexplored effects on the material's structural and excitonic properties Through high-resolution scanning transmission electron microscopy (HRSTEM), density functional theory (DFT), and optical spectroscopy measurements; this work introduces the most encountered and energetically stable point defects. It establishes their impact on the material's optical properties. HRSTEM studies show that the most energetically stable point defects are single (V S and V Se ) and double chalcogen vacancy (V S −V Se ), interstitial defects (Mi), and metal impurities (MW) and establish their structural characteristics. DFT further establishes their formation energies and related localized bands within the forbidden band. Cryogenic excitonic studies on h-BN-encapsulated Janus monolayers offer a clear correlation between these structural defects and observed emission features, which closely align with the results of the theory. Finally, the overall results introduce the defect genome of Janus TMDs as an essential guideline for assessing their structural quality and device properties.

2D materials↗

Nonexcitonic mechanism for electronic and structural phase transitions in Ta 2 ⁢Ni⁢(Se,S) 5

Here, we present a first-principles study based on density functional theory (DFT) on the electronic and structural properties of Ta 2 NiSe 5 , a layered transition metal chalcogenide that has been considered as a possible candidate for an excitonic insulator. Our systematic DFT results however provide a nonexcitonic mechanism for the experimentally observed electronic and structural phase transitions in Ta 2 NiSe 5 , in particular explaining why sulfur substitution of selenium reduces the distortion angle in the low-temperature phase and potassium dosing closes the gap in the electronic structure. Moreover, the calculations show that these two effects couple to each other. Further, our first-principles calculations predict several changes in both the crystal structure and electronic structure under the effects of uniform charge dosing and uniaxial strain, which could be tested experimentally.

Tang, Weichen [University of California, Berkeley,↗

Exciton polaron formation and hot-carrier relaxation in rigid Dion–Jacobson-type two-dimensional perovskites

The efficiency of two-dimensional Dion–Jacobson-type materials relies on the complex interplay between electronic and lattice dynamics; however, questions remain about the functional role of exciton–phonon interactions. Here we establish the robust polaronic nature of the excitons in these materials at room temperature by combining ultrafast spectroscopy and electronic structure calculations. We show that polaronic distortion is associated with low-frequency (30–60 cm –1 ) lead iodide octahedral lattice motions. More importantly, we discover how targeted ligand modification of this two-dimensional perovskite structure manipulates exciton–phonon coupling, exciton polaron population and carrier cooling. At high excitation density, stronger exciton–phonon coupling increases the hot-carrier lifetime, forming a hot-phonon bottleneck. Furthermore, our study provides detailed insight into the exciton–phonon coupling and its role in carrier cooling in two-dimensional perovskites relevant for developing emerging hybrid semiconductor materials with tailored properties.

36 MATERIALS SCIENCE↗

Electronic and magnetic structures of a mixed triple perovskite: Ba 3 NiRuIrO 9

In search of spin-orbit coupling driven nonmagnetic J = 0 ground state and excitonic magnetism, various pentavalent iridates have been studied in recent years. However, a finite moment was observed in most of the cases due to solid state effects. Here, in this work, we investigate the electronic and magnetic structure of 6H hexagonal compound Ba 3 NiRuIrO 9 , where Ir 5+ is present along with magnetic Ni 2+ and Ru 5+ ions. Magnetic susceptibility measurements and neutron powder diffraction (NPD) experiments demonstrate the appearance of short-range magnetic ordering below 170 K and a long-range antiferromagnetic ordering below 80 K. The refinement of the NPD pattern further shows that the Ru and Ir moments interact antiferromagnetically within the dimer and interact ferromagnetically with the Ni sublattice. These experimental findings have been complemented by first-principles density functional theory calculations incorporating spin-orbit coupling effects and electronic correlations for the transitional metal d states. The computed magnetocrystalline anisotropy is also found to be significant and the crystallographic c axis comes out to be the easy axis of magnetization, consistent with the spin alignment direction found from NPD. This study shows that the mixed ruthenate iridate triple perovskite series is a promising family to study the interplay among spin-orbit coupling, electron correlation, and electron filling as a variety of Ba 3 M RuIrO 9 with M as a transition metal ion, rare-earth ion, and alkali metal ions can be synthesized.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Iodine Close Packing in Hybrid Halide Bismuth(III) and Antimony(III) Semiconductors: (NH 3 (CH 2 ) 7 NH 3 ) 2 Bi 2 I 10 and (NH 3 (CH 2 ) 7 NH 3 ) 2 Sb 2 I 10

Simple features in complex hybrid inorganic–organic crystalline materials provide opportunities for targeted discovery of materials with desired optoelectronic properties. In this study, we report the structure and optoelectronic properties of isostructural (NH 3 (CH 2 ) 7 NH 3 ) 2 Bi 2 I 10 and (NH 3 (CH 2 ) 7 NH 3 ) 2 Sb 2 I 10 . The crystal structures are characterized by corner-connected metal-iodide octahedral chains that form a cubic close-packed iodine inorganic framework. Variable temperature UV–visible diffuse reflectance spectroscopy reveals stark contrasts in the onset of absorption and color changes between the [MX6]3– based structures, due to differences in the interaction of the (NH 3 (CH 2 ) 7 NH 3 ) 2+ organic ammonium cation and the iodine packing of the inorganic framework. Density functional theory (DFT) calculations reveal flat bands reflective of the pseudo-1D crystal structure. Dark microwave conductivity (DMC) and time-resolved microwave conductivity (TRMC) reveal an excitonic character with long carrier lifetimes, consistent with the electronically confined octahedral chains. Comparison of the structural features with those of other diammonium-containing crystals reveals that diammoniumheptane can substitute into structures, displacing inorganic octahedra while retaining a close-packed anion framework. This provides a means for targeting new hybrid materials in which “vacancy-ordering” provides a crystal chemical approach for targeting desirable optoelectronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous Gap Opening and Potential Excitonic States in an Ideal Dirac Semimetal Ta 2 Pd 3 Te 5

The opening of an energy gap in the electronic structure generally indicates the presence of interactions. In materials with low carrier density and short screening length, long-range Coulomb interaction favors the spontaneous formation of electron-hole pairs, so called excitons, opening an excitonic gap at the Fermi level. Excitonic materials host unique phenomena associated with pair excitations. However, there is still no generally recognized single-crystal material with excitonic order, which is, therefore, awaited in condensed matter physics. Here, we show that excitonic states may exist in the quasi-one-dimensional material Ta 2 Pd 3 Te 5 , which has an almost ideal Dirac-like band structure, with the Dirac point located exactly at the Fermi level. We find that an energy gap appears at 350 K, and it grows with decreasing temperature. The spontaneous gap opening is absent in a similar material Ta 2 Ni 3 Te 5 . Intriguingly, the gap is destroyed by the potassium deposition on the crystal, likely due to extra-doped carriers. Furthermore, we observe a pair of in-gap flat bands, which is an analog of the impurity states in a superconducting gap. All these observations can be properly explained by an excitonic order, providing Ta 2 Pd 3 Te 5 as a new and promising candidate realizing excitonic states. Published by the American Physical Society 2024

Zhang, Peng (ORCID:0000000225634670)↗

Connectivity-Dependent Exciton–Phonon Coupling in Cesium Bismuth Halide Quantum Dots

Metal halide octahedra form the fundamental functional building blocks of metal halide perovskites, dictating their structures, optical properties, electronic structures, and dynamics. Here, in this study, we show that the connectivity of bismuth halide octahedra in Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 quantum dots (QDs) changes with different halide elements. We use first-principles calculations to reveal the key role of the connectivity of bismuth halide octahedra on the wave function symmetry, Huang-Rhys factor, and exciton-phonon interaction strength. Following QD synthesis via a ligand-mediated transport method, the effect of connectivity is verified with transient absorption spectroscopy, where we contrast Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 QD exciton dynamics. In photoexcited Cs 3 Bi 2 I 9 QDs, phonons related to the vibrational motions of face-sharing [BiI 6 ] 3- bioctahedra couple strongly to the electronic state and drive rapid carrier relaxation. Equivalent signals are not observed for photoexcited Cs 3 Bi 2 Br 9 QDs, implying a lack of phonon involvement in band-edge absorption and subsequent exciton relaxation. Our findings suggest that structural engineering can effectively tune the exciton-phonon coupling and therefore influence exciton relaxation and recombination in perovskite nanomaterials.

TDDFT↗

Band gap dependence of exciton Lande factor in lead halide perovskites

The optical properties of lead halide perovskite semiconductors in vicinity of the bandgap are controlled by excitons, so that investigation of their fundamental properties is of critical importance. The exciton Landé or g-factor g X is the key parameter, determining the exciton Zeeman spin splitting in magnetic fields. The exciton, electron, and hole carrier g-factors provide information on the band structure, including its anisotropy, and the parameters contributing to the electron and hole effective masses. Here, g X is measured by reflectivity in magnetic fields up to 60 T for lead halide perovskite crystals. The materials band gap energies at a liquid helium temperature vary widely across the visible spectral range from 1.520 up to 3.213 eV in hybrid organic–inorganic and fully inorganic perovskites with different cations and halogens: FA 0.9 Cs 0.1 PbI 2.8 Br 0.2 , MAPbI 3 , FAPbBr 3 , CsPbBr 3 , and MAPb(Br 0.05 Cl 0.95 ) 3 . The exciton g-factors are found to be nearly constant, ranging from +2.3 to +2.7. Thus, the strong dependences of the electron and hole g-factors on the bandgap roughly compensate each other when combining to the exciton g-factor. The same is true for the anisotropies of the carrier g-factors, resulting in a nearly isotropic exciton g-factor. The experimental data are compared favorably with model calculation results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Weak Dispersion of Exciton Landé Factor with Band Gap Energy in Lead Halide Perovskites: Approximate Compensation of the Electron and Hole Dependences

The optical properties of lead halide perovskite semiconductors in vicinity of the bandgap are controlled by excitons, so that investigation of their fundamental properties is of critical importance. The exciton Landé or g-factor g X is the key parameter, determining the exciton Zeeman spin splitting in magnetic fields. The exciton, electron, and hole carrier g-factors provide information on the band structure, including its anisotropy, and the parameters contributing to the electron and hole effective masses. Here, g X is measured by reflectivity in magnetic fields up to 60 T for lead halide perovskite crystals. The materials band gap energies at a liquid helium temperature vary widely across the visible spectral range from 1.520 up to 3.213 eV in hybrid organic–inorganic and fully inorganic perovskites with different cations and halogens: FA 0.9 Cs 0.1 PbI 2.8 Br 0.2 , MAPbI 3 , FAPbBr 3 , CsPbBr 3 , and MAPb(Br 0.05 Cl 0.95 ) 3 . The exciton g-factors are found to be nearly constant, ranging from +2.3 to +2.7. Thus, the strong dependences of the electron and hole g-factors on the bandgap roughly compensate each other when combining to the exciton g-factor. The same is true for the anisotropies of the carrier g-factors, resulting in a nearly isotropic exciton g-factor. The experimental data are compared favorably with model calculation results.

36 MATERIALS SCIENCE↗

Optical Activity of Chiral Excitons

Recent activity in the area of chiroptical phenomena has been focused on the connection between structural asymmetry, electron spin configuration and light/matter interactions in chiral semiconductors. In these systems, spin‐splitting phenomena emerge due to inversion symmetry breaking and the presence of extended electronic states, yet the connection to chiroptical phenomena is lacking. Here, in this study, we develop an analytical effective mass model of chiral excitons, parameterized by density functional theory. The model accounts for parity mixing of the band edge Bloch functions resulting from polar distortions, resulting in allowed magnetic dipole transitions. Through the study of a prototypical chiral 2D hybrid perovskite semiconductor, we show that circular dichroism of the chiral exciton and its interband continuum emerges from spin‐splitting via cross‐coupling of Rashba‐like and chiral/helical spin‐texture components. To demonstrate the generality of our approach, and as a counterpoint, we apply our model to describe chiroptical properties of three‐dimensionally confined excitons in perovskite nanocrystals that occur without chiral lattice distortions.

14 SOLAR ENERGY↗