Search NASA⌕ Search

SEARCH · Search NASA

Results for “enzymatic conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Process innovations to enable viable enzymatic poly(ethylene terephthalate) recycling

Enzymatic depolymerization of poly(ethylene terephthalate) (PET) has received considerable attention for closed-loop polyester recycling. However, current approaches for enzymatic PET recycling face challenges to achieve commercial viability with lower environmental impacts compared with virgin polyester manufacturing. Here, in this study, we present multiple process innovations for enzymatic PET recycling that enable economic and environmental feasibility. We show that substrate amorphization through extrusion and quenching is energy-efficient and enables near-quantitative enzymatic conversion in 50 h. Using ammonium hydroxide for pH control and thermolysis of the isolated diammonium terephthalate salt reduces the acid and base consumption by >99%, lowering annual operating expenses by 74%. Fed-batch processing increased ethylene glycol concentration, leading to a 65% reduction in energy consumption for ethylene glycol recovery. These improvements were modeled in an optimal process, with recycled PET estimated to be US$\$$1.51 kg -1 relative to US domestic virgin PET at US$\$$1.87 kg -1 and eliminating key life cycle obstacles to scale this technology.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Simultaneous Overexpression of FERULOYL‐CoA 6′‐HYDROXYLASE 1 and COUMARIN SYNTHASE Leads to Coumarin‐Enriched Lignin and Improved Saccharification in Greenhouse‐ and Field‐Grown Poplar

ABSTRACT The urgent need for renewable resources has increased the interest in woody biomass to manufacture bio‐based products. However, lignin recalcitrance limits the enzymatic conversion of wood into fermentable sugars, posing a major challenge for biomass deconstruction. To address this problem, we aimed at incorporating the coumarin scopoletin into the lignin polymer of poplar ( Populus tremula × P . alba ) by expressing FERULOYL‐CoA 6′‐HYDROXYLASE 1 ( F6′H1 ) and COUMARIN SYNTHASE ( COSY ) in lignifying cells. Three constructs were evaluated: two bicistronic constructs, SCOP1 ( COSY followed by F6′H1 ) and SCOP2 ( F6′H1 followed by COSY ), and one monocistronic, SCOP3 (only F6′H1 ). SCOP1 poplars produced most free scopoletin without altering overall lignin, cellulose or hemicellulose content. SCOP2 poplars were overall less efficient in scopoletin production and most of these lines showed a severe biomass yield penalty, whereas SCOP3 caused plant lethality. NMR and metabolic analyses confirmed that scopoletin cross‐coupled with G and S monomers during lignification in SCOP1 lines. In addition to scopoletin, the detection of benzodioxane structures revealed the incorporation of dihydroxycoumarins. Overall coumarin incorporation in lignin amounted up to 2.3%. After alkaline pretreatment, wood from greenhouse‐grown SCOP1 poplars released up to 29% more glucose compared to the wild type upon limited saccharification. Field‐testing of three SCOP1 lines showed a 6 to 11% increase in saccharification efficiency, with the line containing the lowest scopoletin levels maintaining normal growth. These results demonstrate that engineering lignin composition in poplar can improve saccharification, and emphasize the importance of construct design, translational research and field validation.

alternative lignin monomers↗
DOE OSTI2022

Overexpression of the scopoletin biosynthetic pathway enhances lignocellulosic biomass processing

Lignin is the main factor limiting the enzymatic conversion of lignocellulosic biomass into fermentable sugars. Here, to reduce the recalcitrance engendered by the lignin polymer, the coumarin scopoletin was incorporated into the lignin polymer through the simultaneous expression of FERULOYL-CoA 6'-HYDROXYLASE 1 (F6'H1) and COUMARIN SYNTHASE (COSY) in lignifying cells in Arabidopsis. The transgenic lines overproduced scopoletin and incorporated it into the lignin polymer, without adversely affecting plant growth. About 3.3% of the lignin units in the transgenic lines were derived from scopoletin, thereby exceeding the levels of the traditional p-hydroxyphenyl units. Saccharification efficiency of alkali-pretreated scopoletin-overproducing lines was 40% higher than for wild type.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Bacterial diversity dynamics in microbial consortia selected for lignin utilization

Lignin is nature’s largest source of phenolic compounds. Its recalcitrance to enzymatic conversion is still a limiting step to increase the value of lignin. Although bacteria are able to degrade lignin in nature, most studies have focused on lignin degradation by fungi. To understand which bacteria are able to use lignin as the sole carbon source, natural selection over time was used to obtain enriched microbial consortia over a 12-week period. The source of microorganisms to establish these microbial consortia were commercial and backyard compost soils. Cultivation occurred at two different temperatures, 30°C and 37°C, in defined culture media containing either Kraft lignin or alkaline-extracted lignin as carbon source. iTag DNA sequencing of bacterial 16S rDNA gene was performed for each of the consortia at six timepoints (passages). The initial bacterial richness and diversity of backyard compost soil consortia was greater than that of commercial soil consortia, and both parameters decreased after the enrichment protocol, corroborating that selection was occurring. Bacterial consortia composition tended to stabilize from the fourth passage on. After the enrichment protocol, Firmicutes phylum bacteria were predominant when lignin extracted by alkaline method was used as a carbon source, whereas Proteobacteria were predominant when Kraft lignin was used. Bray-Curtis dissimilarity calculations at genus level, visualized using NMDS plots, showed that the type of lignin used as a carbon source contributed more to differentiate the bacterial consortia than the variable temperature. The main known bacterial genera selected to use lignin as a carbon source were Altererythrobacter , Aminobacter , Bacillus , Burkholderia , Lysinibacillus , Microvirga , Mycobacterium , Ochrobactrum , Paenibacillus , Pseudomonas , Pseudoxanthomonas , Rhizobiales and Sphingobium . These selected bacterial genera can be of particular interest for studying lignin degradation and utilization, as well as for lignin-related biotechnology applications.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1992

Thermophilic Beta-Glycosidase

Report describes identification of thermophilic Beta-glycosidase enzyme from isolate of Sulfolobus solfataricus, sulfur-metabolizing archaebacteria growing aerobically and heterotrophically to relatively high cell yields. Enzyme useful in enzymatic conversion of cellulose to D-glucose and important in recycling of biomass. Used for removal of lactose from milk products. Offers promise as model substance for elucidation of basic principles of structural stabilization of proteins.

Grogan, Dennis W.↗
NASA NTRS2015

Martian Superoxide and Peroxide O2 Release (OR) Assay: A New Technology for Terrestrial and Planetary Applications

This study presents an assay for the detection and quantification of soil metal superoxides and peroxides in regolith and soil. The O2 release (OR) assay is based on the enzymatic conversion of the hydrolysis products of metal oxides to O2, and their quantification by an O2 electrode based on the stoichiometry of the involved reactions: The intermediate product O2 from the hydrolysis of metal superoxides is converted by cytochrome c to O2, and also by superoxide dismutase (SOD) to 1/2 mol O2 and 1/2 mol H2O2, which is then converted by catalase (CAT) to 1/2 mol O2. The product H2O2 from the hydrolysis of metal peroxides and hydroperoxides is converted to 1/2 mol O2 by CAT. The assay-method was validated in a sealed sample chamber using a liquid-phase Clark-type O2 electrode with known concentrations of O2 and H2O2, and with commercial metal superoxide and peroxide mixed with Mars analogue Mojave and Atacama Desert soils. Carbonates and perchlorates, both present on Mars, do not interfere with the assay. The assay lower limit of detection, using luminescence quenching/optical sensing O2-electrodes, is 1 nmol O2 cm(exp. -3) or better. The activity of the assay enzymes SOD and cytochrome c was unaffected up to 6 Gy exposure by gamma-radiation, while CAT retained 100% and 40% of its activity at 3 and 6 Gy, respectively, demonstrating the suitability of these enzymes for planetary missions, e.g., in Mars or Europa.

soil metal superoxides and peroxides↗
DOE OSTI2022

Effect of ash in paper sludge on enzymatic hydrolysis

The valorization of paper sludge is a high-potential process to develop renewable fuels and chemicals, which can be integrated with pulp and paper mills. Calcium carbonate is the main ash component in sludge, which plays a role in buffering pH and potentially lowering the conversion during enzymatic hydrolysis. Therefore, it is important to investigate the effect of ash on sugar yields and examine pH change to introduce efficient and economical enzymatic hydrolysis of sludge. Carbohydrate conversion was enhanced when the ash was removed by fractionation. On the other hand, the highest sugar recovery was obtained when the sludge contained 20% ash content. The pH change during enzymatic hydrolysis was influenced by ash and explained why sludge-derived hydrolysate showed lower carbohydrate conversion. Therefore, a high shear process with the increased acid amount is suggested to prohibit the negative effect of ash and enhance the accessibility of cellulase to fibers. Finally, this study highlights the feasibility of using wet waste streams generated by the paper industry.

09 BIOMASS FUELS↗
DOE OSTI2020

Modified alkaline peroxide pretreatment: An efficient path forward for bioethanol production from bamboo

To overcome the typical delignification saturation point of alkaline peroxide pretreatment and further facilitate lignin removal, a novel modified alkaline hydrogen peroxide pretreatment (MAHP) was proposed by introducing ethanol into the reaction system. The dosages of H 2 O 2 , ethanol, and pretreatment temperature were optimized, and the results revealed that a maximum lignin removal as high as 79.25% could be achieved at only 100 °C, 3 wt% H 2 O 2 concentration and 1 wt% ethanol concentration. Meanwhile, 76.5% of glucan and 56.0% of xylan were preserved at this pretreatment condition. By overcoming the delignification saturation point, enzymatic hydrolysis efficiency was remarkably enhanced, achieving 96.76% and 97.38% of glucan and xylan conversion, respectively, which are 7.4 and 11.4 times as compared to that of the untreated bamboo. Furthermore, the simultaneous saccharification and fermentation (SSF) result indicated an identical ethanol yield of ~75% when elevating the SSF solid loading from 5% to 30%. Based on the sequential SSF and xylose fermentation results, about 5.6 tons of bamboo would be consumed to produce 1 ton of ethanol. Finally, the energy balance revealed that a positive balance of 1255.4 KJ could be generated via processing 1 kg bamboo. Here, the results demonstrate that the MAHP is a promising high-efficiency pretreatment technology for bamboo due to the mild pretreatment severity and robust ethanol yield.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Effects of pH on potassium sulfite based alkali pretreatment of corn stover under mild conditions

Sulfite salt-based alkali pretreatment is increasingly recognized as an effective method for biomass pretreatment under mild temperature conditions. However, the effects of pH on the pretreatment process are not yet fully understood. In this study, the pretreatment of corn stover using potassium sulfite (KS) combined with aqueous ammonia (AA) at 80 °C was investigated within a pH range of 9–14. Results demonstrated that high pH environment established by combining KS with AA is critical for enhancing sulfonation modifications, effectively removing lignin, facilitating deacetylation, and significantly improving the total sugar yield. For example, when comparing KS alone at pH 9.7, AA alone at pH 13, and KS combined with AA at pH 13, the delignification rates were 13.82 %, 67.71 %, and 71.27 %, respectively; the deacetylation rates were 25.84 %, 81.19 %, and 82.54 %, respectively; and the total sugar yields were 24.85 %, 78.96 %, and 92.12 %, respectively. The X-ray photoelectron spectroscopy (XPS) results confirmed that sulfonation reactions occurred under low-temperature and high pH conditions, leading to enhanced delignification efficiency. Results also showed that the cellulase adsorption, water retention, and the enzymatic digestibility of the pretreated solids increased along with rising pH. Moreover, nuclear magnetic resonance (NMR) analysis revealed that KS-based alkali pretreatment retained more β-O-4 native bonds in the pretreated lignin-rich hydrolysate than alkali pretreatment alone did, providing promising opportunities for the subsequent upgrading of lignin into high-value products.

09 BIOMASS FUELS↗
NASA NTRS2022

Mineral-Catalysed Formation of Marine NO and N 2 O on the Anoxic Early Earth

Microbial denitrification converts fixed nitrogen species into gases in extant oceans. However, it is unclear how such transformations occurred within the early nitrogen cycle of the Archean. Here 5we present experimental anoxic surface-catalyzed reduction of nitrite and nitrate via green rust and magnetite combined with diffusion and photochemical modeling. We find that in a Fe 2+ -rich marine environment, Fe minerals could have catalyzed abiotic denitrification reactions leading to the formation of nitric oxide (NO) and nitrous oxide (N 2 O). Nitrate did not exhibit reactivity in the presence of either mineral or aqueous Fe2+, however, both minerals induced rapid nitrite reduction 10to NO and N 2 O. While N 2 O escaped into the atmosphere (63% of nitrite-nitrogen, with green rust as catalyst), NO remained associated with precipitates (7%) serving as a potential shuttle to the benthic ocean.The modeling suggests that marine N 2 O emissions would have sustained 0.8-6 ppb of atmospheric N 2 O without a protective ozone layer. Our findings add detail to the as yet incompletely documented Archean nitrogen cycle, implying a globally distributed process driven 15by chemical kinetics similar to those of modern enzymatically mediated conversions.

Steffen Buessecker↗
DOE OSTI2022

Low-Cost Cellulosic Sugars Produced by NREL's Deacetylation and Mechanical Refining Process

The National Renewable Energy Laboratory has developed a deacetylation and mechanical refining (DMR) process that combines low-severity chemical pretreatment and mechanical refining to sidestep the expenses and challenges of traditional pretreatments, such as hydrothermal and dilute acid technologies. The DMR process is an important step in turning agricultural waste to sustainable aviation fuel.

biofuel↗
DOE OSTI2026

Mimicking Extradiol Dioxygenase Reactivity on Iridium

Extradiol dioxygenases catalyze the cleavage of benzenediol (catechol) or vicinal aminophenols via oxygen atom insertion into the 2,3- C–C bond. These reactions are most often proposed to proceed through the migratory rearrangement of a d6 alkylperoxide, generating the corresponding d 6 ring expanded product. However, regiospecific insertion remains a rare outcome among synthetic model complexes. Here, a dioxygenated Ir complex (2) converts to (a) the paramagnetic metallatrioxolane (3) and (b) oxygen atom inserted products (4) and (5); all three complexes are third-row metal analogues of enzymatic intermediates. The conversion of 2 to 3 was triggered by an H• abstraction, generating a third-row metallatrioxolane that is one electron reduced from the canonical d 6 alkylperoxide. Alternatively, photolysis of 2 (467 nm) results in ring-expanded product 4, from which an H• can be abstracted to generate 5. This latter complex is also one electron reduced relative to the canonical ring expansion product. Because extradiol mechanisms were largely defined using Fe(II) metallocofactors, 3 and 5 may be especially relevant to the known Co(II) accepting variants. We propose these states became synthetically accessible via the incorporation of a catechol-like substrate into the larger, multidentate ligand L1. This perturbation enhances the affinity of L1 (and related intermediates) to the metal. The same perturbation may have also been key in characterizing the first κ 2 -bound, dianionic ortho ester ligand – the observed binding mode in the x-ray structure of 5. Broadly, we propose through this case study that connecting abiological dioxygen complexes to non-heme oxygenase-like intermediates might be a “roadmap” towards regiospecific aerobic oxygenations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Time-resolved β-lactam cleavage by L1 metallo-β-lactamase

Abstract Serial x-ray crystallography can uncover binding events, and subsequent chemical conversions occurring during enzymatic reaction. Here, we reveal the structure, binding and cleavage of moxalactam antibiotic bound to L1 metallo-β-lactamase (MBL) from Stenotrophomonas maltophilia . Using time-resolved serial synchrotron crystallography, we show the time course of β-lactam hydrolysis and determine ten snapshots (20, 40, 60, 80, 100, 150, 300, 500, 2000 and 4000 ms) at 2.20 Å resolution. The reaction is initiated by laser pulse releasing Zn 2+ ions from a UV-labile photocage. Two metal ions bind to the active site, followed by binding of moxalactam and the intact β-lactam ring is observed for 100 ms after photolysis. Cleavage of β-lactam is detected at 150 ms and the ligand is significantly displaced. The reaction product adjusts its conformation reaching steady state at 2000 ms corresponding to the relaxed state of the enzyme. Only small changes are observed in the positions of Zn 2+ ions and the active site residues. Mechanistic details captured here can be generalized to other MBLs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Methanobactin from methanotrophs: genetics, structure, function and potential applications

ABSTRACT Aerobic methane-oxidizing bacteria of the Alphaproteobacteria have been found to express a novel ribosomally synthesized post-translationally modified polypeptide (RiPP) termed methanobactin (MB). The primary function of MB in these microbes appears to be for copper uptake, but MB has been shown to have multiple capabilities, including oxidase, superoxide dismutase and hydrogen peroxide reductase activities, the ability to detoxify mercury species, as well as acting as an antimicrobial agent. Herein, we describe the diversity of known MBs as well as the genetics underlying MB biosynthesis. We further propose based on bioinformatics analyses that some methanotrophs may produce novel forms of MB that have yet to be characterized. We also discuss recent findings documenting that MBs play an important role in controlling copper availability to the broader microbial community, and as a result can strongly affect the activity of microbes that require copper for important enzymatic transformations, e.g. conversion of nitrous oxide to dinitrogen. Finally, we describe procedures for the detection/purification of MB, as well as potential medical and industrial applications of this intriguing RiPP.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Chapter 24: The Compound Middle Lamella as a Target for Improved Deconstruction of Woody Biomass

The compound middle lamella (CML) of woody angiosperm species, such as poplar (Populus spp.), birch (Betula spp.), and alder (Alnus spp.), and gymnosperm species, such as pine (Pinus spp.), Douglas fir (Pseudotsuga menziesii), and spruce (Picea spp.), is an amalgam of lignin, hemicellulosic xylans, and pectic polysaccharides that is the major site of cell-cell adhesion of fibre cells and tracheary elements. In grass species, such as sorghum (Sorghum bicolor), switchgrass (Panicum virgatum), and sugarcane (Saccharum officinarum), a phenylpropanoid network deposited in xylan-rich primary walls extends into the lignified CML. This review traces the early history of discovery of the molecular components of the CML and presents the current state of knowledge on the development of the CML in bioenergy-relevant woody species and grasses. This chapter emphasises the role of the CML in the recalcitrance of biomass to deconstruction by mechanical and enzymatic means for conversion to biofuels and valuable bioproducts. The use of genetic engineering to alter CML composition and structure to facilitate biomass deconstruction and to redesign wood to generate materials with novel properties is discussed.

BIOMASS FUELS↗
DOE OSTI2022

Turning Food Waste into Biobased Products (CRADA Final Report)

As part of the Cyclotron Road program, the ZestBio project team investigated the production of chemical products from industrial agricultural byproducts and sustainable carbon sources. The goal of the research was to explore methods of manufacturing of new chemical products from renewable carbon that could address growing consumer and regulatory demands for environmentally-friendly and biobased chemicals. Previously, ZestBio and the technical founders developed enzymatic and chemical conversion technologies that transform abundant sugars found in these byproducts into value-adding, high performance chemicals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗