SEARCH · Search NASA
Results for “ethanol dehydration”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Microchannel Reactor for Ethanol to Butene: CRADA 503 [Abstract only]
A key challenge facing most bioprocessing operations is that multiple unit operations are required, thereby resulting in complex, energy-intensive, and expensive processes. Further, biomass transportation costs drive the need for smaller, distributed processing plants. To incorporate the smaller scales desirable for biomass, novel processes must be developed with reduced capital costs. With over 20 years of experience in the development and commercialization of microchannel reactor technology, Oregon State University will partner with Pacific Northwest National Laboratory to demonstrate a microchannel reactor with lower capital costs for an alcohol-to-jet (ATJ) process technology that is currently being commercialized by LanzaTech. Ethanol can be produced from biomass feedstocks such as LanzaTech’s proprietary biochemical process using carbon from a number of possible feedstocks; syngas generated from biomass resources (e.g., MSW, organic industrial waste, agriculture waste) or reformed biogas, or from other biomass feedstocks such as corn kernel fiber. Ethanol then undergoes catalytic dehydration to form ethylene followed by a two-step oligomerization, hydrogenation, and fractionation to control the hydrocarbon product slate to the jet-range. Successful process development aided by a market pull for low carbon aviation fuel has spurred scale-up and commercial demonstration. However, Sustainable Aviation Fuel is a very price sensitive market and improved economics through process intensification will make the current ATJ process even more attractive. Recent efforts at PNNL have culminated in the development of a new catalyst technology for the conversion of ethanol to n-butene-rich olefins. A greater than 90% conversion, total olefin selectivity of 80-90% (n-butene selectivity ~60%), and good stability over a 100 hour test duration has been demonstrated at the bench scale. Producing butene-rich olefins directly from ethanol with high yield is new and impactful because the higher olefins can be selectively oligomerized to distillate-range hydrocarbons, thus eliminating one process step from the current ATJ process. Further, coupling the severely endothermic ethanol dehydration with exothermic C-C bond formation results in more energy efficient processing. Additional intensification and energy savings will stem from incorporating this new ethanol to n-butene catalyst technology within the ATJ process implemented using a microchannel reactor platform. Due to recent advances in microchannel manufacturing methods and associated cost reductions we believe the time is right to adapt this technology toward new commercial bioconversion applications.
Spatially Aligned Binary Single-Site Catalyst on Defective SiO 2 for Cascading Reactions
Capitalizing on the success of single-atom catalysts (SACs), dual-atom catalysts (DACs) have emerged as a new frontier in heterogeneous catalysis. However, most SACs and DACs studies seek to uniformly distribute the catalytic sites on the support material, which can hinder their effectiveness in intricate multistep cascading reactions. Particularly, it is a grand challenge to precisely control the spatial distribution of two different single sites forming binary sites so that reactants and intermediates contact the catalytic sites in the exact sequence required by the reaction steps. Here, in this work, we report a new type of binary single-site catalyst, Cu 1 –Zr 1 @SiO 2 , with Cu 1 and Zr 1 sites spatially aligned with the reaction sequence of the cascade reactions. The catalyst is synthesized by a modified reverse microemulsion approach, with single Cu sites anchored by nonbridging oxygen hole centers, which were induced by doping single Zr sites into SiO 2 . Low-energy ion scattering spectroscopy (LEIS) reveals that the outermost surface of the catalyst contains only Cu single sites, while the Zr sites are dispersed in the bulk. The catalytic performance is demonstrated in ethanol conversion to butenes, a model cascade reaction which includes ethanol dehydrogenation and aldol condensation steps. The precisely spatially controlled binary sites enable ethanol to first undergo dehydrogenation to acetaldehyde on Cu sites, followed by aldol condensation of acetaldehyde on Zr sites. As a result, C 3+ olefins selectivity as high as 77.0% (56.0% selectivity of butenes) is achieved by suppressing ethylene formation.
Fabrication of High-quality NaA Zeolite Membranes with a Novel Plate & Frame Configuration for Molecular-scale Mixture Separations
Explore the source record for details and available documents.
Catalytic Upgrading of Ethanol to C8+ Distillate Range Ethers via Guerbet Coupling and Etherification
Guerbet coupling followed by etherification is a two step process for conversion of ethanol into distillate range molecules. This involves first alcohol oligomerization, followed by acid-catalyzed dehydration. As we will show in this presentation, ethanol can be converted to higher linear and α-branched alcohols by C-C coupling reactions (ethanol oligomerization) as well as to high molecular weight esters by C-O coupling reactions with Cu/MgxAlOy (CuHT) catalysts. Alcohols may be converted to ethers via bimolecular dehydration in a subsequent step. We have identified more than 160 number of species in the products including alcohols, esters, aldehydes, ketonces, and olefins. Alcohols range from C4 to C10. Both alcohols and esters follow a Schulz-Flory chain growth model. We show the relationship between the catalyst properties (BET surface area, acid and base site count and Cu loading and synthesis method) and the performance in the reactions. We also show that physical mixtures of CuHT and HT can have similar product selectivity of low loading CuHT catalysts. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at high ethanol conversion (~70%). Alcohol selectivity follows a Schultz-Flory distribution at all studied conversions, and that adsorbed ethanol-derived species may undergo surface oligomerization into 1-butanol and higher alcohols before desorbing in a chain-growth mechanism. Zeolite catalysts convert the C4+ alcohols into C8+ ethers in both batch and continuous flow reactors. Selectivities of up to 80% to C8+ ethers at around 70% conversion using a single pass continuous flow system are able to be achieved. The final product feedstocks obtained from etherification have been used in technoeconomic (TEA) and lifecycle analysis (LCA), which indicate a reduction in greenhouse gas (GHG) emissions of 50% relative to conventional diesel. These final feedstocks are undergoing engine testing to elucidate the physiochemical properties and will be compared to diesel #2 ASTM standards as a reference and will serve as a basis to improve the final bio-diesel blendstocks from etherification.
Catalytic upgrading of ethanol to C8+ distillate range ethers via Guerbet coupling and etherification
In this presentation we describe the catalytic approaches for conversion of ethanol into diesel fuel ethers. This involves first alcohol oligomerization, followed by acid-catalyzed dehydration. As we will show in this presentation, ethanol can be converted to higher linear and α-branched alcohols by C-C coupling reactions (ethanol oligomerization) as well as to high molecular weight esters by C-O coupling reactions with Cu/MgxAlOy (CuHT) catalysts. Alcohols may be converted to ethers via bimolecular dehydration in a subsequent step. We have identified more than 160 number of species in the products including alcohols, esters, aldehydes, ketones, and olefins. Alcohols range from C4 to C10. Both alcohols and esters follow a Schulz-Flory chain growth model. We show the relationship between the catalyst properties (BET surface area, acid and base site count and Cu loading and synthesis method) and the performance in the reactions. We also show that physical mixtures of CuHT and HT can have similar product selectivity of low loading CuHT catalysts. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at high ethanol conversion (~70%). Alcohol selectivity follows a Schultz-Flory distribution at all studied conversions, and that adsorbed ethanol-derived species may undergo surface oligomerization into 1-butanol and higher alcohols before desorbing in a chain-growth mechanism. Zeolite catalysts convert the C4+ alcohols into C8+ ethers in both batch and continuous flow reactors. Selectivities of up to 80% to C8+ ethers at around 70% conversion using a single pass continuous flow system are achieved. The final product feedstocks obtained from etherification have been used in technoeconomic (TEA) and lifecycle analysis (LCA), which indicate a reduction in greenhouse gas (GHG) emissions of 50% relative to conventional diesel and diesel fuel prices that are lower than biodiesel. These final feedstocks are undergoing engine testing to elucidate the physiochemical properties and compare well to diesel #2 ASTM standards.
Random Walks and Sticky Surfaces: Single-Molecule Measurements of Solute Diffusion in Ethanol/Water-Filled Anodic Alumina Nanopores
Nanoporous anodic aluminum oxide (AAO) membranes are now being explored for use in advanced chemical separations, including in the dehydration of biofuels such as ethanol. Optimization of membrane performance requires an in-depth understanding of how solvent mixtures and solutes behave under nanoconfinement. In this work, the diffusion of rhodamine B (RhB) dye through 10 nm and 20 nm AAO nanopores filled with a series of ethanol/water mixtures (0 - 33% water) is explored by fluorescence correlation spectroscopy (FCS). RhB was found to diffuse through the pores by two distinct mechanisms with mean diffusion coefficients, $D_f$ and $D_s$, reflecting fast and slow diffusive motions, respectively, with values that differ by nearly two orders of magnitude. Further, both $D_f$ and $D_s$ increased with pore size and were significantly smaller than $D_b$, the RhB diffusion coefficient in bulk liquid. Mean $D_f$ values follow a composition-dependent trend that closely mimics the viscosity dependence of $D_b$. Additional slowing of fast RhB diffusion is attributed to both hydrodynamic drag and electrostatic interactions with the nanopore surface. The mean $D_s$ values exhibit a different trend with increasing water content, revealing an increase in $D_s$ and a decrease in the contributions of slow diffusion to the observed dynamics. The fluorescence time transient data used in the analysis show that the slow diffusion process is strongly hindered and likely involves frequent adsorption of RhB to the pore surfaces. These results provide new insights into the detailed molecular-level mechanisms of mass transport in nanoporous AAO membranes.
Tailoring olefin distribution via tuning rare earth metals in bifunctional Cu-RE/beta-zeolite catalysts for ethanol upgrading
Bioethanol to middle distillate technologies have offered a unique solution to produce renewable aviation fuel for decarbonizing the hard-to-electrify sectors. Here, we have developed the series of bimetallic Cu- and rare earth-containing (RE) Beta zeolite catalysts that yield high C 3+ alkene selectivity from ethanol upgrading (>80% selectivity at ~100% conversion, 623 K). The formation rates of butene isomers to C 5+ alkenes are linearly correlated with the strength of Lewis acidic RE identity, which follows the sequence of Yb 12 /Beta >Y 7 /Beta > Gd 12 /Beta > Ce 10 /Beta > La 12 /Beta. Rate measurements indicate that the RE selection plays the vital role in altering the rate of the key competitive reactions within the ethanol-to-alkenes reaction network, namely C 4 alcohol dehydration and C-C chain growth, which dictate alkene product distributions. Finally, these findings indicate a feasible and promising method for tailoring alkene product distributions from ethanol upgrading, which is of notable significance to the generation of renewable middle distillates.
Surface Reactions and Catalytic Activities for Small Alcohols over LaMnO3(100) and La0.7Sr0.3MnO3(100): Dehydrogenation, Dehydration, and Oxidation
Explore the source record for details and available documents.
Cascade Reaction of Ethanol to Butadiene over Multifunctional Silica-Supported Ag and ZrO 2 Catalysts
Although butadiene is currently a by-product of naphtha cracking, interest in producing butadiene from bio-based ethanol has increased because of the lower environmental impact of the ethanol to butadiene reaction. Furthermore, this work explores a multifunctional catalyst system composed of silica-supported Ag and ZrO 2 used for the cascade reaction of ethanol to butadiene at 573 K. The Ag and ZrO 2 components were synthesized on separate support particles enabling characterization of each component without interference from the other. High selectivity to butadiene (65%) at high ethanol conversion (75%) was achieved with an appropriate ratio of Ag and ZrO 2 in the reactor. Silver catalyzed the initial dehydrogenation of ethanol to acetaldehyde while ZrO 2 catalyzed the C-C coupling and subsequent dehydration reactions. The silica-supported ZrO 2 exhibited superior selectivity relative to bulk ZrO 2 in the Ag-promoted ethanol to butadiene reaction. Results from Zr K-edge X-ray absorption spectroscopy and UV-Vis spectroscopy showed that ZrO 2 was highly dispersed on the silica support over a range of loadings. Infrared spectroscopy of adsorbed pyridine, CO, and CO 2 , and kinetics of probe reactions 1-butene double bond isomerization, 2-propanol decomposition, and ethanol hydrogenation of acetone were used to compare the acid-base nature and chemical reactivity of silica-supported ZrO 2 to bulk ZrO 2 .
Phosphorus-containing solid catalysts and reactions catalyzed thereby, including synthesis of p-xylene
Methods and phosphorus-containing solid catalysts for catalyzing dehydration of cyclic ethers (e.g., furans, such as 2,5-dimethylfuran) and alcohols (e.g., ethanol and isopropanol). The alcohols and cyclic ethers may be derived from biomass. One example includes a tandem Diels-Alder cycloaddition and dehydration of biomass-derived 2,5-dimethyl-furan and ethylene to renewable p-xylene. The phosphorus-containing solid catalysts are also active and selective for dehydration of alcohols to alkenes.
Supercritical Reforming of Wet Ethanol for High Efficiency Direct-injection Heavy-duty Compression-ignition Engines
The purpose of the research was to investigate the potential of using a mature bio-fuel in heavy-duty compression ignition engines. By co-optimizing both the fuel characteristics and engine system the potential for a superior outcome was demonstrated. The use of wet bio-ethanol eliminates the majority of the energy intensive distilling and dehydrating fuel production processes, which moves the fuel towards carbon neutral and also lowers the fuel costs. The relatively high water content of the resulting fuel is leveraged in the proposed novel combustion system by incorporating an integrated high efficiency exhaust waste heat recovery system. This results in significantly higher thermal efficiency. In addition the combustion system features low criteria pollutant emissions and the potential to reduce the initial cost of the engine system hardware. Substantial societal benefits are demonstrated through the co-optimization of the fuel and engine system. A computational proof-of-concept study has been performed to demonstrate the potential benefits of a novel wet ethanol heavy-duty compression ignition combustion system featuring integrated exhaust waste heat recovery. A combined in-cylinder closed cycle 3D computational fluid dynamics (CFD) - 1D engine system simulation approach was used. The models were validated to baseline engine data using diesel fuel and then applied to the wet ethanol study. The original concept was to maximize exhaust waste heat recovery through supercritical reforming of the wet ethanol fuel. Phase I simulation results indicated that the optimal solution for maximum engine efficiency gains were realized through maximizing thermo-mechanical recuperation with negligible fuel reformation. The results show the potential to achieve impressive gains in brake thermal efficiency (BTE) over the base diesel engine. The potential to increase BTE up to 20.9% over the base diesel engine was demonstrated, with even larger gains possible through reduced in-cylinder heat transfer losses. The majority of the efficiency gains were realized through integrated high efficiency exhaust waste heat recovery. The concept also has the potential to achieve future ultra-low NO x emissions standards and negligible engine-out soot emissions. The mixing controlled combustion of high temperature wet ethanol features relatively low engine-out NO x emissions without the need for exhaust gas recirculation (EGR). The soot free combustion enabled by the relatively high oxygen content of ethanol also allows for the use of stoichiometric mixing controlled combustion, which is not practical with diesel fuel. When stoichiometric combustion is used a simple passive 3-way catalyst can be used for exhaust emissions after-treatment and near zero tailpipe emissions. The Phase I simulations results have defined the system layout and requirements in preparation for the Phase II experimental proof-of-concept study. The potential applications of the research include most current applications of diesel engines. The Phase I study focused on heavy-duty on-highway class 8 trucks. However, virtually any application that requires highly efficient clean power generation would benefit from the novel engine system proposed. The results indicate substantial fuel cost savings and reduced greenhouse gas emissions with similar or reduced initial system hardware costs compared to modern diesel engine systems.
One Earth Energy FEED Process Design Basis
This report establishes the process design basis for the front-end engineering design (FEED) of a carbon capture and injection facility at One Earth Energy's (OEE) ethanol production plant in Gibson City, Illinois, developed as part of the Illinois Storage Corridor CarbonSAFE Phase III project. The facility is designed to compress and dehydrate up to approximately 458,000 metric tonnes of CO 2 per year, sourced directly from OEE's ethanol fermenters, for permanent injection into a saline aquifer approximately four miles from the plant. At normal operating conditions, the system will process 1,290 metric tonnes of CO 2 per day, assuming 355 operating days per year and an ethanol production rate of 160 million gallons per year. The proposed process trains a multistage centrifugal blower with a five-stage reciprocating compressor, delivering CO 2 to the injection wellhead at up to 1,500 psig. Triethylene glycol (TEG) dehydration, applied after the fourth compression stage, reduces water content to a target of 10 lb/MMscf, well within the 30 lb/MMscf injection limit. Beyond dehydration, no additional treatment is required; trace impurities including oxygen and nitrogen will remain in the injected stream. Key design considerations include the absence of spare cooling tower capacity at the site, necessitating new cooling infrastructure, and the need for a new electrical substation to support large motor loads. The facility is designed for continuous, largely unattended operation, monitored around the clock by existing OEE operations staff. This document serves as the foundational reference for all subsequent detailed engineering activities associated with the OEE CO 2 injection facility.
Isolated Metal Sites in Cu–Zn–Y/Beta for Direct and Selective Butene-Rich C 3+ Olefin Formation from Ethanol
Direct and selective production of C 3+ olefins from bioethanol remains a critical challenge and important for the production of renewable transportation fuels such as aviation biofuels. In this study, we report a Cu–Zn–Y/Beta catalyst for selective ethanol conversion to butene-rich C 3+ olefins (88% selectivity at 100% ethanol conversion, 623 K), where the Cu, Zn, and Y sites are all highly dispersed. The ethanol-to-butene reaction network includes ethanol dehydrogenation, aldol condensation to crotonaldehyde, and hydrogenation to butyraldehyde, followed by further hydrogenation and dehydration reactions to form butenes. Cu sites play a critical role in promoting hydrogenation of the crotonaldehyde C═C bond to form butyraldehyde in the presence of hydrogen, making this a distinctive pathway from crotyl alcohol-based ethanol-to-butadiene reaction. Reaction rate measurements in the presence of ethanol and acetaldehyde (543 K, 12 kPa ethanol, 1.2 kPa acetaldehyde, 101.9 kPa H 2 ) over monometallic Zn/Beta and Y/Beta catalysts indicate that Y sites have higher C–C coupling rates than over Zn sites (initial C–C coupling rate, 6.1 × 10 –3 mol mol Y –1 s –1 vs 1.2 × 10 –3 mol mol Zn –1 s –1 ). Further, Lewis-acidic Y-site densities over Cu–Zn–Y/Beta with varied Y loadings are linearly correlated with the initial C–C coupling rates, suggesting that Lewis-acidic Y sites are the predominant sites that catalyze C–C coupling in Cu–Zn–Y/Beta catalysts. Control experiments show that the dealuminated Beta support is important to form higher density of Lewis-acidic Y sites in comparison with other supports such as silica, or deboronated MWW despite similar atomic dispersion of Y sites and Y–O coordination numbers over these supports, leading to more than 9 times higher C–C coupling rate per mole Y over dealuminated Beta relative to other supports. This study highlights the significance of unique combination of metal sites in contributing to the selective valorization of ethanol to C 3+ olefins, motivating for exploring multifunctional zeolite catalysts, where the presence of multiple sites with varying reactivities and functions allows for controlling the predominant molecular fluxes toward the desired products in complex reactions.
Pairing Ga/Al-Zeolites with tailored acidity as tandem catalysts for the conversion of alcohols to olefins
Zeolites are versatile catalysts owing to their tunable acidity where the active site(s) can be placed within the crystal framework or as extra-framework species in confined pores. A common approach to tailor Brønsted acidity is heteroatom exchange involving the replacement of framework aluminum with alternative elements. Introduction of heteroatoms often results in less acidic catalysts that can be used in tandem reactions for targeted reactive intermediates. Here, in this study, we prepare a series of three different zeolites with MWW, CHA, and MFI frameworks as aluminosilicates and gallosilicates to demonstrate their performance in alcohol dehydration reactions. The two reactions examined in this study are methanol conversion to dimethyl ether and ethanol conversion to ethylene. Our findings reveal that Ga-zeolites exhibit superior performance with Ga-MCM-22 (MWW) achieving nearly 100% alcohol conversion and selectivity to desired products at contact times that are significantly less than most dehydration catalysts reported in literature. The unique properties of Ga-zeolites are attributed to their reduced acid site strength via a direct (one-pot) synthesis that avoids conventional time-intensive, multi-step post-synthesis modifications of Al-zeolites. Here we demonstrate the use of Ga-zeolites as tandem catalysts when paired with a downstream Al-zeolite in a dual-bed reactor configuration to convert cheaper reagents (alcohols) upstream to more desired intermediates as feeds for downstream catalysts to produce light olefins. We demonstrate that dual beds using Ga-zeolite – Al-ZSM-5 (upstream–downstream) pairings outperform single bed configurations with Al-ZSM-5 or a physical mixture (Ga-/Al-zeolite) for methanol to hydrocarbons reactions, with notable improvements in catalyst lifetime and increased light olefins selectivity. Similarly, dual beds using Ga-zeolite – Al-SSZ-13 (upstream–downstream) pairings result in improved performance for ethanol to propylene reactions with significant increases in propylene selectivity (>20 %) compared to a conventional single bed configuration of Al-SSZ-13. Overall, this study offers a new perspective on the use of heteroatom-exchanged zeolite catalysts in tandem reactions as a means of capitalizing on their reduced acid site strength and suggests differences in the intrinsic acidity of zeolite crystal structures.
Using ethanol and isopropanol as biomass model compounds for understanding bond scission mechanisms over Cu/Mo 2 N catalysts
The conversion of biomass compounds into fuels and chemicals is an important step towards a more sustainable future. This work combines results from model surfaces and powder catalysts to demonstrate Cu-modified mo- lybdenum nitride (Cu/Mo 2 N) as a selective catalyst for dehydrogenation of the biomass model compounds, ethanol and isopropanol. Results from model surfaces showed that while Mo2N led to unselective decomposition via both dehydrogenation and dehydration, the addition of Cu increased the dehydrogenation activity and selectivity. DFT calculations showed how Cu influenced the structures of active sites, adsorbate interactions, and thus the product selectivity. Batch reactor studies on corresponding powder catalysts confirmed the trend that Cu modification increased dehydrogenation activity, and in situ X-ray absorption spectroscopy elucidated the Cu oxidation state under reaction conditions. Further, this work demonstrates a strategy for promoting dehydrogenation over Mo 2 N-based catalysts, as well as the feasibility of using model surfaces to guide the design of industrially relevant catalysts.
Structure–Activity Relationships for Ethanol Dehydrogenation to Acetaldehyde by Silica-Supported Zinc Oxide Catalysts
Silica-supported ZnO efficiently catalyzes the nonoxidative dehydrogenation of ethanol to acetaldehyde, which is relevant for production of 1,3-butadiene from bioethanol. Characterization with in situ spectroscopies under dehydrated conditions (high sensitivity-low energy ion scattering (HS-LEIS), diffuse reflectance (DR) UV–vis, X-ray absorption spectroscopy (XAS), diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), inelastic neutron scattering (INS), and UV Raman), and ammonia adsorption probed by temperature-programmed desorption followed by DRIFTS and mass spectrometry (DRIFTS-MS NH 3 -TPD), and DFT calculations revealed that the supported ZnO x phase was present as isolated surface ZnO x sites on SiO 2 , with the vast majority coordinated by two siloxane bonds and one silicon atom with two nonbridging oxygens ((≡SiO) 2 Zn 2+ O 2 Si=), anchored at 4-, 5-, and 6-membered siloxane rings. A minor fraction of surface ZnO x sites possessed Lewis acidity, and even fewer sites possessed a Bro̷nsted acidic Zn(OH) + Si moiety. Ethanol temperature-programmed surface reaction-mass spectrometry (TPSR-MS) with various oxidative or ethanol reaction pretreatments indicated that only sites with Lewis and Bro̷nsted acidic character (Zn(OH) + Si) were active for ethanol dehydrogenation, while the majority surface (≡SiO) 2 Zn 2+ O 2 Si= sites were inactive. Greater heterogeneity among all surface ZnO x sites, as assessed by in situ DR UV–vis spectroscopy, was associated with a greater number of ZnO x sites that were active for ethanol dehydrogenation as well as lower enthalpic barriers for acetaldehyde production among the most active surface ZnO x sites. Turnover frequencies and the apparent activation energy for ethanol dehydrogenation were determined from steady-state kinetics. Together, these findings suggested that anchoring inactive surface (≡SiO) 2 Zn 2+ O 2 Si= sites on the silica support caused a greater number of active surface ZnO x sites to adopt a more strained configuration, promoting ethanol dehydrogenation catalysis. Pretreatments and catalysts that promoted desorption of ethanol during TPSR, taken as a marker of surface dehydroxylation, were associated with an increased number of the most active surface (Zn(OH) + Si) sites. Such findings suggested that inactive surface ZnO x sites were activated for ethanol dehydrogenation by dehydroxylation of the support and/or decreased coordination to hemilabile siloxane ligands.
Ethanol Conversion to C 4+ Olefins over Bimetallic Copper- And Lanthanum-Containing Beta Zeolite Catalysts
We report ethanol conversion to C 4+ olefins remains a critical yet nonselective process for producing renewable middle distillates. Here, Cu–La/Beta catalysts composed of copper and lanthanum incorporated onto a dealuminated Beta support are reported for ethanol conversion to C 4+ olefins (73% selectivity, ~98% ethanol conversion, 623 K,<4% C 1 –C 3 hydrocarbons) which particularly favors C 5+ olefin formation (43% selectivity) as a distinction from the benchmarking Cu–Y/Beta catalyst. Monometallic Cu/Beta or La/Beta samples are insufficient to catalyze the C 4+ olefin formation and primarily form dehydration products (e.g., ethylene and diethyl ether), indicating the necessity of both Cu and La species for butene and C 5+ olefin formation. Increasing the bulk La loading at a fixed Cu content yields higher C 5+ olefins until the La/Cu molar ratio reaches 3.6. These findings indicate Cu–La/Beta as an effective ethanol conversion catalyst that facilitates multiple C–C bond formation events required for synthesizing C 5+ olefins (i.e., hexenes and octenes).