Search NASA⌕ Search

SEARCH · Search NASA

Results for “ethylene glycol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Deep Eutectic Solvent Formed by Imidazolium Cyanopyrrolide and Ethylene Glycol for Reactive CO 2 Separations

Solvents made from a reactive ionic liquid, with an imidazolium cation and pyrrolide anion, and ethylene glycol at a wide compositional range were studied for separations of CO 2 at low partial pressures (<<0.1 bar up to 1 bar). Thermal analysis and measurements of viscosity and density show compacting of the liquid upon mixing with enhanced stability achieved by hydrogen bonding. A detailed mechanistic study was performed by IR, quantitative NMR, and ab initio calculations that show significant CO 2 absorption capacity below 5000 ppm of CO 2 in N 2 . Three reversible routes are found that yield carbonate (major product), carboxylate (moderate), and carbamate (minor) species. With CO 2 at 100% RH, bicarbonate along with carbonate species form. The CO 2 -ethlyene glycol reaction complex, the carbonate anion, is stabilized by the hydrogen bonding and Coulombic interactions, thus preventing evaporation of the solvent during regeneration. This study demonstrates a promising approach to designer green solvents for CO 2 separations in open systems such as direct air capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cosolvent-tuned interactions in ionic liquids: A vibrational and quantum-chemical study of ethylene glycol ratio effects

Ionic liquids (ILs) are attractive media for CO 2 capture but remain limited by viscosity and cost. Blending ILs with ethylene glycol (EG) is a practical route to mitigate these constraints, yet the molecular origins of cosolvent effects and their dependence on composition are not well resolved. We combine Fourier-transform infrared (FT-IR) spectroscopy with quantum-chemical (DFT) analysis to elucidate how the IL:EG molar ratio modulates intermolecular interactions and electronic structure. Computed vibrational frequencies enable mode assignment and deconvolution of overlapping bands, revealing systematic, ratio-dependent shifts and broadenings in (i) EG O–H stretching, (ii) cation and EG C–H stretchings (imidazolium C2–H, C4–H, C5–H, methyl and ethyl groups, -CH2 of EG), (iii) anion signature modes (e.g., CN motifs), and (iv) EG C–O and C–C stretchings, consistent with the redistribution of hydrogen-bonding networks. Molecular electrostatic potential (MESP) maps quantify attenuation of extreme potential regions with increasing EG, indicating progressive screening of cation–anion electrostatic interactions. Quantum Theory of Atoms in Molecules (QTAIM) identifies emergent bond critical points between EG and the IL ions, while Reduced Density Gradient–Noncovalent Interaction (RDG–NCI) analysis differentiates strong directional hydrogen bonds from dispersive contacts across compositions. Together, these results show that EG fraction controls a switch from predominantly ion–ion to mixed ion–EG coordination, altering local polarity and polarizability that underlie the observed FT-IR trends. The framework provides composition–structure–spectrum relationships that can guide rational selection of IL:EG ratios to balance favorable molecular interactions with practical performance targets in scalable CO 2 capture systems.

DAC↗
DOE OSTI2020

Thermal Stability of π-Conjugated n -Ethylene-Glycol-Terminated Quaterthiophene Oligomers: A Computational and Experimental Study

This work represents a joint computational and experimental study on a series of $\textit{n}$-ethylene glycol (PEO$\textit{n}$)-terminated quaterthiophene (4T) oligomers for 1 < $\textit{n}$ < 10 to elucidate their self-assembly behavior into a smectic-like lamellar phase. This study builds on an earlier study for $\textit{n}$ = 4 that showed that our model predictions were consistent with experimental data on the melting behavior and structure of the lamellar phase, with the latter consisting of crystal-like 4T domains and liquid-like PEO4 domains. The present study aims to understand how the length of the terminal PEO$\textit{n}$ chains modulates the disordering temperature of the lamellar phase and hence the relative stability of the ordered structure. In this work, a simplified bilayer model, where the 4T domains are not explicitly described, is put forward to efficiently estimate the disordering effect of the PEO domains with increasing n; this method is first validated by correctly predicting that layers of alkyl (PE)-capped 4T oligomers (for 1 < $\textit{n}$ < 10) stay ordered at room temperature. Both 4T-domain implicit and explicit model simulations reveal that the order-disorder temperature decreases with the length of the PEO capping chains, as the associated increase in conformational entropy drives a tendency toward disorder that overtakes the cohesive energy, keeping the ordered packing of the 4T domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In situ saxs characterization of thermoresponsive behavior of a poly(ethylene glycol)-graft-(poly(vinyl caprolactam)-co-poly(vinyl acetate)) amphiphilic graft copolymer

In this work, we report the thermoresponsive assembly and rheology of an amphiphilic thermosensitive graft copolymer, poly(ethylene glycol)-graft-(poly(vinyl caprolactam)-co-poly(vinyl acetate)) (commercial name Soluplus ® ), which has been investigated for potential biomedical applications. It has received attention due to is ability to solubilize hydrophobic drugs and for its thickening behavior close to body temperature. Through use of the synchrotron at Brookhaven National Lab, and collaboration with the department of energy, the nanoscale structure and properties can be probed in greater detail. Soluplus ® undergoes two structural changes as temperature is increased; the first, a concentration independent change where samples become turbid at 32 °C. Increasing the temperature further causes the formation of physically associated hydrogels. This sol-gel transition is concentration dependent and occurs at 32 °C for 40 wt% samples, and increases to 42 °C for 10 wt% samples. From variable temperature SAXS characterization micelles of 20–25 nm in radius can be seen and maintain their size and packing below 32 °C. A gradual increase in the aggregation of micelles corresponding to a thickening of the material is also observed. Close to and above the gelation temperature, micelles collapse and form a physically associated 3D network. A model is proposed to explain these physical effects, where the poly(vinyl caprolactam) group transitions from the hydrophilic corona at room temperature to the hydrophobic core as temperature is increased.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Refined Classical Force Field for Choline Chloride and Ethylene Glycol Mixtures over Wide Composition Range

In this work, a classical force field based on the General Amber Force Field (GAFF) was refined for the simulation of choline chloride (ChCl) and ethylene glycol (EG) mixtures over a wide composition range by scaling the partial charges and van der Waals parameters. The scaling factors were derived by fitting the simulation results to only eight experimental density and viscosity data points of pure EG, and ChCl/EG mixtures at 1:2, 1:4, and 1:6 molar ratios. Using the refined force field, properties essential for electrochemical applications such as density, viscosity, self-diffusion coefficient, and ionic conductivity were calculated, and excellent agreement to experimental results was found even for compositions and temperatures not used in the fitting procedure. In addition, new experimental data for density, viscosity, and ionic conductivity are reported as a function of temperature and composition for this mixture. To the best of our knowledge, this is the first classical force field developed for the study of ChCl/EG mixtures over a composition range that includes the eutectic point. Using the new model, the liquid dynamics was studied in terms of ionic conductivity. It was found that the dynamics in ChCl/EG mixtures with ChCl mole fraction higher than 20% is similar to that of ionic liquids, high temperature molten salts, and highly concentrated water-in-salt electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Static and Dynamic Intensification of Water–Ethylene Glycol Separation Using a Dividing Wall Column

This paper makes several first-of-a-kind contributions toward “double intensification” (static/dynamic) of distillation systems, focusing in particular on the energy-intensive separation of a mixture of water and ethylene glycols. First, we demonstrate that a dividing wall column (DWC) can be an appropriate choice for separating wide-boiling zeotropic mixtures. Additionally, we show that the conventional DWC configuration where the wall is in the “middle” should be discarded in favor of a less frequently encountered “common-bottom” setup. For the mixture considered, choosing a DWC in lieu of a conventional two-column sequence can lead to over 6% energy cost savings and a 5% reduction in the number of stages compared to the conventional direct sequence two-column counterpart. The second part of this paper focuses on applying the previously introduced concept of dynamic process intensification to the DWC, the first time that such an effort is reported in the literature, to our knowledge. Here, we show that an additional 1.4% energy savings can be unlocked in this way, and confirm the stable operation of the column via dynamic simulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A coarse-grain force field based on quantum mechanics (CGq FF) for molecular dynamics simulation of poly(ethylene glycol)- block -poly(ε-caprolactone) (PEG- b -PCL) micelles

In order to provide the means to predict from molecular dynamics (MD) simulations the structures of copolymer-based micelles in solution, we developed coarse grain force field (CGq FF) parameters for poly(ethylene glycol) (PEG) and for poly(ε-caprolactone) (PCL). A key advance here is the use of quantum mechanics to train the parameters describing the non-bonded (NB) interactions between the CG beads. The functional forms are the same as the MARTINI CG FF so standard MD codes can be used. Our CGq FF describes well the experimentally observed properties for the polymer–air and polymer–water interfaces, indicating the accuracy of the NB interactions. Additionally, the structural properties (density, radius of gyration ( R g ), and end-to-end distance ( h )) match both experiment and all atom (AA) simulations. We illustrate the application of this CGq FF by following the formation of a spherical micelle from 250 chains of PEG 23 - b -PCL 9 diblock copolymer, each block with molecular weight of 1000 Daltons (10 500 beads, corresponding to 123 250 atoms), in a water box with 119 139 water beads (426 553 water molecules).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

n ‐Type Rigid Semiconducting Polymers Bearing Oligo(Ethylene Glycol) Side Chains for High‐Performance Organic Electrochemical Transistors

Abstract N‐type conjugated polymers as the semiconducting component of organic electrochemical transistors (OECTs) are still undeveloped with respect to their p‐type counterparts. Herein, we report two rigid n‐type conjugated polymers bearing oligo(ethylene glycol) (OEG) side chains, PgNaN and PgNgN, which demonstrated an essentially torsion‐free π‐conjugated backbone. The planarity and electron‐deficient rigid structures enable the resulting polymers to achieve high electron mobility in an OECT device of up to the 10 −3 cm 2 V −1 s −1 range, with a deep‐lying LUMO energy level lower than −4.0 eV. Prominently, the polymers exhibited a high device performance with a maximum dimensionally normalized transconductance of 0.212 S cm −1 and the product of charge‐carrier mobility μ and volumetric capacitance C* of 0.662±0.113 F cm −1 V −1 s −1 , which are among the highest in n‐type conjugated polymers reported to date. Moreover, the polymers are synthesized via a metal‐free aldol‐condensation polymerization, which is beneficial to their application in bioelectronics.

Chen, Xingxing↗
DOE OSTI2022

Covalently integrated silica nanoparticles in poly(ethylene glycol)-based acrylate resins: thermomechanical, swelling, and morphological behavior

Nanocomposites integrate functional nanofillers into viscoelastic matrices for electronics, lightweight structural materials, and tissue engineering. Herein, the effect of methacrylate-functionalized (MA-SiO 2 ) and vinyl-functionalized (V-SiO 2 ) silica nanoparticles on the thermal, mechanical, physical, and morphological characteristics of poly(ethylene glycol) (PEG) nanocomposites was investigated. The gel fraction of V-SiO 2 composites decreases upon addition of 3.8 wt% but increases with further addition (>7.4 wt%) until it reaches a plateau at 10.7 wt%. The MA-SiO 2 induced no significant changes in gel fraction and both V-SiO 2 and MA-SiO 2 nanoparticles had a negligible impact on the nanocomposite glass transition temperature and water absorption. The Young's modulus and ultimate compressive stress increased with increasing nanoparticle concentration for both nanoparticles. Due to the higher crosslink density, MA-SiO 2 composites reached a maximum mechanical stress at a concentration of 7.4 wt%, while V-SiO 2 composites reached a maximum at a concentration of 10.7 wt%. Scanning electron microscopy, transmission electron microscopy, and small-angle X-ray scattering revealed a bimodal size distribution for V-SiO 2 and a monomodal size distribution for MA-SiO 2 . Although aggregates were observed for both nanoparticle surface treatments, V-SiO 2 dispersion was poor while MA-SiO 2 were generally well-dispersed. Finally, these findings lay the framework for silica nanofillers in PEG-based nanocomposites for advanced manufacturing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2018

Phenolic Polymer Interactions with Water and Ethylene Glycol Solvents

Interactions between pre-cured phenolic polymer chains and a solvent have a significant impact on the structure and properties of the final post-cured phenolic resin. Developing an understanding of the nature of these interactions is important and will aid in the selection of the proper solvent that will lead to the desired final product. Here, we investigate the role of the phenolic chain structure and the solvent type on the overall solvation performance of the system through ab initio techniques and molecular dynamics simulations. Two types of solvents are considered: ethylene glycol (EGL) and H2O. Three phenolic chain structures are considered, including two novolac-type chains with either an ortho-ortho (OON) or an ortho-para (OPN) backbone network and a resole-type (RES) chain with an ortho-ortho network. Each system is characterized through a structural analysis of the solvation shell and the hydrogen-bonding environment as well as through a quantification of the solvation free energy along with partitioned interaction energies between specific molecular species. The combination of simulations and the analyses indicate that EGL provides a higher solvation free energy than H2O due to more energetically favorable hydrophilic interactions as well as favorable hydrophobic interactions between CH element groups. In addition, the phenolic chain structure significantly affects the solvation performance, with OON having limited intermolecular hydrogen-bond formations, while OPN and RES interact more favorably with the solvent molecules. The results suggest that a resole-type phenolic chain with an ortho-para network should have the best solvation performance in EGL, H2O, and other similar solvents.

Haskins, Justin B.↗
DOE OSTI2024

Effect of K + Force Fields on Ionic Conductivity and Charge Dynamics of KOH in Ethylene Glycol

Predicting ionic conductivity is crucial for developing efficient electrolytes for energy storage and conversion and other electrochemical applications. An accurate estimate of ionic conductivity requires understanding complex ion–ion and ion–solvent interactions governing the charge transport at the molecular level. Molecular simulations can provide key insights into the spatial and temporal behavior of electrolyte constituents. However, such insights depend on the ability of force fields to describe the underlying phenomena. In this work, molecular dynamics simulations were leveraged to delineate the impact of force field parameters on ionic conductivity predictions of potassium hydroxide (KOH) in ethylene glycol (EG). Four different force fields were used to represent the K + ion. Diffusion-based Nernst–Einstein and correlation-based Einstein approaches were implemented to estimate the ionic conductivity, and the predicted values were compared with experimental measurements. The physical aspects, including ion-aggregation, charge distribution, cluster correlation, and cluster dynamics, were also examined. A force field was identified that provides reasonably accurate Einstein conductivity values and a physically coherent representation of the electrolyte at the molecular level.

25 ENERGY STORAGE↗
DOE OSTI2025

Nanofilm Composite Membranes of Bottlebrush Poly(1,3‐Dioxolane) Plasticized by Poly(Ethylene Glycol) for CO 2 /N 2 Separation

Abstract Poly(1,3‐dioxolane) has emerged as a leading membrane material for post‐combustion CO 2 capture due to its high ether oxygen content and strong affinity toward CO 2 . However, they are often cross‐linked to inhibit crystallization, which makes them impossible to fabricate into industrial thin‐film composite membranes. Herein, soluble and high molecular weight bottlebrush polymers ( b PDXLA) are synthesized using reversible addition‐fragmentation chain transfer polymerization and demonstrate the feasibility of fabricating nanofilm (≈100 nm) composite membranes (NCMs). Furthermore, b PDXLA can be plasticized using a miscible additive of poly(ethylene glycol) dimethyl ether (PEGDME) to improve CO 2 permeability while retaining good CO 2 /N 2 selectivity. For example, adding 20 mass% PEGDME improves CO 2 permeance from 930 to 1300 GPU and decreases CO 2 /N 2 selectivity from 74 to 53 at 25 °C; the membrane exhibits stable separation performance competitive with state‐of‐the‐art commercial membranes. This work unveils a practical approach to designing uncross‐linked, highly polar polymers for practical membrane gas separation and highlights a facile way to enhance performance by incorporating miscible plasticizers using industrial manufacturing processes.

Zhang, Gengyi [Department of Chemical and Biologic↗
DOE OSTI2020

Pd‐Ru Alloy Nanocages with a Face‐Centered Cubic Structure and Their Enhanced Activity toward the Oxidation of Ethylene Glycol and Glycerol

Abstract This article reports a facile method for the synthesis of Pd‐Ru nanocages by activating the galvanic replacement reaction between Pd nanocrystals and a Ru(III) precursor with I ‐ ions. The as‐synthesized nanocages feature a hollow interior, ultrathin wall of ≈2.5 nm in thickness, and a cubic shape. Our quantitative study suggests that the reduction rate of the Ru(III) precursor can be substantially accelerated upon the introduction of I ‐ ions and then retarded as the ratio of I ‐ /Ru 3+ is increased. The Pd‐Ru nanocages take an alloy structure, with the Ru atoms in the nanocages crystallized in a face‐centered cubic structure instead of the hexagonal close‐packed phase taken by bulk Ru. Using Pd nanocubes with different edge lengths, the dimensions of the nanocages in the range of 6−18 nm can readily be tuned. When tested as catalysts toward the electro‐oxidation of ethylene glycol and glycerol, respectively, the Pd‐Ru cubic nanocages prepared from 18 nm Pd cubes exhibit 5.1‐ and 6.2‐fold enhancements in terms of mass activity relative to the commercial Pd/C. After 1000 cycles of accelerated durability test, the mass activities of the nanocages are still 3.3 and 3.7 times as high as that of the pristine commercial Pd/C catalyst, respectively.

Zhao, Ming↗
DOE OSTI2021

Corrigendum to “Engineering Pseudomonas putida KT2440 for efficient ethylene glycol utilization” [Metab. Eng. 48 (2018) 197–207]

The sequence of the promoter used to drive expression of glcDEF operon in the engineered strain MFL185 in the original article was incorrect. As described here, we performed additional experiments that indicate expression of this operon was increased in MFL185, as intended. Ultimately, this error is immaterial with respect to the findings and conclusions reported in the original article.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Correlation of Processing and Structure in an Ethylene‐Glycol Side‐Chain Modified Polythiophene via Combined X‐Ray Scattering and 4D Scanning Transmission Electron Microscopy

The results of a combined grazing incidence wide-angle X-ray scattering (GIWAXS) and 4D scanning transmission microscopy (4D-STEM) analysis of the effects of thermal processing on poly(3[2-(2-methoxyethoxy)ethoxy]-methylthiophene-2,5-diyl) are reported, a conjugated semiconducting polymer used as the active layer in organic electrochemical transistor devices. GIWAXS provides a measure of overall crystallinity in the film, while 4D-STEM produces real-space maps of the morphology and orientation of individual crystallites along with their spatial extent and distribution. The sensitivity of the 4D-STEM detector allows for collection of electron diffraction patterns at each position in an image scan while limiting the imparted electron dose to below the damage threshold. In conclusion, the effects of heat treatment on the distribution and type of crystallites present in the films is determined.

36 MATERIALS SCIENCE↗