Search NASA⌕ Search

SEARCH · Search NASA

Results for “exsolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Exsolution and electrochemistry in perovskite solid oxide fuel cell anodes: Role of stoichiometry in Sr(Ti,Fe,Ni)O 3

The exsolution of metal cations from oxides under reducing fuel conditions ends in the formation of surface metallic nanoparticles, which can reduce Solid Oxide Fuel Cell anode polarization resistance. However, the loss of the B-site cations shifts the stoichiometry of the perovskite oxide. Depending on the amount exsolved and the initial stoichiometry, the exsolution can presumably shift the oxide away from its single-phase perovskite region. Herein, the direct comparison of initially stoichiometric composition Sr(Ti 0.3 Fe 0.63 Ni 0.07 )O 3-δ (STFN0) with initially A-site deficient Sr 0.95 (Ti 0.3 Fe 0.63 Ni 0.07 )O 3-δ (STFN5) is conducted and reported. X-ray diffraction along with scanning and transmission electron microscopy analysis of the oxides, which are both reduced at 850 °C in H 2 /H 2 O/Ar, demonstrates a similar size and density of exsolved Fe–Ni alloy nanoparticles, albeit with slightly different alloy compositions. Whereas the oxide phase in reduced STFN5 shows a well-ordered perovskite structure, the greater B-site deficiency in reduced STFN0 results in a highly disordered and strained structure. The electrochemical performance of STFN0 anodes is inferior to that of STFN5 anodes, and even worse than SrTi 0.3 Fe 0.7 O 3-δ (Ni-free) anodes. It appears that an initial Sr deficiency is important to avoid a too-high B-site deficiency after exsolution, which distorts the perovskite structure and impairs electrochemical processes.

25 ENERGY STORAGE↗

Roadmap on exsolution for energy applications

Over the last decade, exsolution has emerged as a powerful new method for decorating oxide supports with uniformly dispersed nanoparticles for energy and catalytic applications. Due to their exceptional anchorage, resilience to various degradation mechanisms, as well as numerous ways in which they can be produced, transformed and applied, exsolved nanoparticles have set new standards for nanoparticles in terms of activity, durability and functionality. In conjunction with multifunctional supports such as perovskite oxides, exsolution becomes a powerful platform for the design of advanced energy materials. In the following sections, we review the current status of the exsolution approach, seeking to facilitate transfer of ideas between different fields of application. We also explore future directions of research, particularly noting the multi-scale development required to take the concept forward, from fundamentals through operando studies to pilot scale demonstrations.

25 ENERGY STORAGE↗

Impact of SO 2 on NiFe Nanoparticle Exsolution and Dissolution from LaFe 0.9 Ni 0.1 O 3 Perovskite Oxides

Ni-doped LaFeO 3 perovskite oxide is a promising cathode material for solid oxide electrolysis cells (SOECs) designed for CO 2 /H 2 O coelectrolysis. Here, the performance of LaFe 0.9 Ni 0.1 O 3 is being investigated under real-world conditions that include exposure to acid gases, such as SO 2 , relevant to SOEC operation. Experiments show that LaFe 0.9 Ni 0.1 O 3 exsolves NiFe nanoparticles, along with the formation of surface SO 4 2– and SO 3 2– after being exposed to 200 ppm of SO 2 . This suggests that the ionic diffusion of Ni 3+ and Fe 3+ between the bulk and the surface remains unaffected throughout the exsolution–dissolution–exsolution cycle. Thermochemical water splitting has been employed as a probe reaction to evaluate the catalytic properties of the exsolved NiFe nanoparticles. These nanoparticles demonstrated improved hydrogen production compared to bare perovskite oxide substrates. However, after exposure to SO 2 , the formation of Fe-rich NiFe nanoparticles led to poor thermocatalytic performance and rapid deactivation of the perovskite at elevated temperatures. Density functional theory (DFT) analysis was utilized to validate the experimental findings, indicating a significantly negative reaction energy for water splitting over exsolved Fe, as well as stronger binding of SO 2 to Fe than to Ni. Computational analysis further suggests that the presence of surface sulfate promotes the formation of Fe-rich NiFe nanoparticles, aligning with the experimental results. Overall, this study clarifies how SO 2 affects the structure of SOEC perovskite oxide candidate materials. Future engineering efforts should focus on enhancing nanoparticle exsolution and sulfur resistance, which is crucial for improving the hydrogen production capacity of La-based perovskite oxides for electro- and thermocatalytic water splitting in real environments containing acid gases.

Najimu, Musa [Univ. of Southern California, Los An↗

Selective Metal Exsolution in BaFe 2-y My(PO 4 ) 2 (M = Co 2+ , Ni 2+ ) Solid Solutions

The 2D-Ising ferromagnetic phase BaFe 2+ 2 (PO 4 ) 2 shows exsolution of up to one-third of its iron content (giving BaFe 3+ 1.33 (PO 4 ) 2 ) under mild oxidation conditions, leading to nanosized Fe 2 O 3 exsolved clusters. Here we have prepared BaFe 2–y My(PO 4 ) 2 (M = Co 2+ , Ni 2+ ; y = 0, 0.5, 1, 1.5) solid solutions to investigate the feasibility and selectivity of metal exsolution in these mixed metallic systems. For all the compounds, after 600 °C thermal treatment in air, a complete oxidation of Fe 2+ to Fe 3+ leaves stable M 2+ ions, as verified by 57 Fe Mössbauer spectroscopy, TGA, TEM, microprobe, and XANES. Furthermore, the size of the nanometric α-Fe 2 O 3 clusters coating the main phase strongly depends on the y M metal concentration. For M-rich phases the iron diffusion is hampered so that a significant fraction of superparamagnetic α-Fe2O3 particles (100% for BaFe 0.5–x Co 1.5 (PO 4 ) 2 ) was detected even at 78 K. Although Ni 2+ and Co 2+ ions tend to block Fe diffusion, the crystal structure of BaFe 0.67 Co 1 (PO 4 ) 2 demonstrates a fully ordered rearrangement of Fe 3+ and Co 2+ ions after Fe exsolution. We found that the magnetic behaviors of the Fe-depleted materials are mostly dominated by antiferromagnetic exchange, while Co 2+ -rich compounds show metamagnetic transitions reminiscent of the BaCo 2 (PO 4 ) 2 soft helicoidal magnet.

Alcover, Ignacio Blazquez↗

Micromodel Investigations of CO2 Exsolution from Carbonated Water in Sedimentary Rocks

In this study, carbon dioxide exsolution from carbonated water is directly observed under reservoir conditions (9MPa and 45oC). Fluorescence microscopy and image analysis are used to quantitatively characterize bubble formation, morphology, and mobility. Observations indicate the strong influence of interfacial tension and pore-geometry on bubble growth and evolution. Most of the gas exhibits little mobility during the course of depressurization and clogs water flow paths. However, a snap-off mechanism mobilizes a small portion of the trapped gas along the water flow paths. This feature contributes to the transport of the dispersed exsolved gas phase and the formation of intermittent gas flow. A new definition of critical gas saturation is proposed accordingly as the minimum saturation that snap-off starts to produce mobile bubbles. Low mobility of the water phase and CO2 phase in exsolution is explained by formation of dispersed CO2 bubbles which block water flow and lack the connectivity to create a mobile gas phase.

CO2 exsolution, micromodel, snap-off, mobility, ca↗

Pore-scale multiphase flow modeling and imaging of CO 2 exsolution in Sandstone

This study utilizes synchrotron X-ray micro-tomography and pore scale modeling to investigate the process of gas exsolution and how it affects non-wetting phase relative permeability. Exsolved gas distributions are measured on Domengine and Boise sandstone samples using synchrotron X-ray micro-tomography. Observed gas phase distributions are compared to a new model that simulates the growth and distribution of exsolved gas phase at the pore-scale. Water relative permeability curves are calculated using a Stokes flow simulator with modeled and observed gas distributions, under various conditions, such as rock geometry, and pressure depletion rates. By comparing the actual bubble distributions with modeled distributions, we conclude that exsolved gas is more likely to form and accumulate at locations with higher water velocities. This suggests that convective delivery of CO2 to the gas bubble is a primary mechanism for bubble growth, as compared to diffusive transport through the aqueous phase. For carbonated brine flowing up a fault at half a meter per day, with 5% exsolved gas, the water relative permeability is estimated to be 0.6~0.8 for various sandstones. The reduction of water mobility reduces upward brine migration when even a small amount of exsolution occurs.

58 GEOSCIENCES↗

Insufficient Energy From MgO Exsolution to Power Early Geodynamo

The origin of Earth's ancient magnetic field is an outstanding problem. It has recently been proposed that exsolution of MgO from the core may provide sufficient energy to drive an early geodynamo. Here, in this work, we present new experiments on Mg partitioning between iron-rich liquids and silicate/oxide melts. Our results indicate that Mg partitioning depends strongly on the oxygen content in the iron-rich liquid, in contrast to previous findings that it depends only on temperature. Consequently, MgO exsolution during core cooling is drastically reduced and insufficient to drive an early geodynamo alone. Using the new experimental data, our thermal model predicts inner core nucleation at ~850 Ma and a nearly constant paleointensity.

58 GEOSCIENCES↗

Crystallographic and electronic evolution of lanthanum strontium ferrite (La 0.6 Sr 0.4 FeO 3-δ ) thin film and bulk model systems during iron exsolution

In this work, we study the changes in the crystallographic phases and in the chemical states during the iron exsolution process of lanthanum strontium ferrite (LSF, La 0.6 Sr 0.4 FeO 3-δ ). By using thin films of orthorhombic LSF, grown epitaxially on NaCl(001) and rhombohedral LSF powder, the materials gap is bridged. Furthermore, the orthorhombic material transforms into a fluorite structure after the exsolution has begun, which further hinders this process. Additionally, for the powder material, by a combination of in situ core level spectroscopy and ex situ neutron diffraction, we could directly highlight differences in the Fe chemical nature between surface and bulk: whereas the bulk contains Fe(IV) in the fully oxidized state, the surface spectra can be described perfectly by the sole presence of Fe(III). We also present corresponding magnetic and oxygen vacancy concentration data of reduced rhombohedral LSF that did not undergo a phase transformation to the cubic perovskite system based on neutron diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformations and exsolution in lunar and terrestrial calcic plagioclases.

A coarse domain structure had been discovered in plagioclase in an electron microscopic study of lunar rocks reported by Christie et al. (1971). The domain structures are described in more detail, and their significance in the light of current knowledge concerning the crystal structures of the plagioclases is discussed. An exsolution texture is also described. On the basis of the scale of exsolution it appears that the Apollo 11 and 12 basalts examined cooled more rapidly than the Apollo 14 basalt, which in turn cooled more rapidly than the Stillwater rock.

Heuer, A. H.↗

Relative cooling rates of mare basalts at the Apollo 12 and 15 sites as estimated from pyroxene exsolution data

X-ray single-crystal diffraction studies, supplemented by electron microprobe analyses of core pigeonites and rim augites from rocks 12031, 15085, 15475, and 15495, have been used to suggest cooling rates for these and other Apollo 12 and 15 rocks studied by similar methods. The extent of subsolidus phase separation of pyroxenes is used as a measure of the cooling rate. The results were interpreted in terms of model cooling histories of a lava flow whose thickness was estimated from the absolute cooling rates obtained by cooling rate experiments and by temperature-time variation through an extrusive flow computed by employing simplified theory of Jaeger. All available data on the exsolution and cation distributions of pyroxenes from Apollo 12 and 15 samples at present are consistent with the hypothesis that these rocks were derived from the top and interior of lava flows with thicknesses of 4-10 m. A process for exsolution of augite from a host pigeonite on (100) has been related to its low-calcium content.

Takeda, H.↗

Engineering surface segregation of perovskite oxide through wet exsolution for CO catalytic oxidation

Cation segregation occurring near the surface or interfaces of solid catalysts plays an important role in catalytic reactions. Unfortunately, the native surface of perovskite oxides is dominated by passivated A-site segregation, which severely hampers the catalytic activity and durability of the system. To address this issue, we present a wet exsolution method to reconstruct surface segregation in perovskite cobalt oxide. Here, under reduction etching treatment of glycol solution, inert surface Sr segregation was transformed into active Co 3 O 4 segregation. By varying the reaction time, we achieved differing coverage of the active Co 3 O 4 segregation on the La 0.5 Sr 0.5 CoO 3-δ (LSCO) perovskite oxide surface. This study reveals that CO oxidation activity exhibits a volcano-shaped dependence on the coverage of Co 3 O 4 segregation at the surface of a perovskite cobalt oxide. Furthermore, we find that a suitable coverage of Co 3 O 4 segregation can dramatically improve the catalytic activity of the perovskite catalyst by enhancing interface interactions. Co K-edge, Co L-edge, and O K-edge X-ray absorption spectra confirm that the synergistic effect optimizes the covalence of the metal-oxygen bond at the surface and interface. This work not only contributes to the design of perovskite-type catalysts, but also provides important insight into the relationship between surface segregation and catalytic activity.

36 MATERIALS SCIENCE↗

Exsolution of NiCo alloys over Ruddlesden-Popper perovskite for mild electrochemical synthesis of ammonia on protonic ceramic electrochemical cells

Ammonia synthesis from renewable energies on protonic ceramic electrochemical cells (PCECs) shows great potential. The primary challenges in ammonia synthesis on PCECs include sluggish catalytic activity, competition from the hydrogen evolution reaction, and unsatisfactory durability of the cathode, which is the active site of ammonia generation. Here, in this study, we report an elaborate design of the cathode with an intended formula of Pr 4 Ni 1.79 Co 1.2R u 0.01 O 10-δ , where NiCo alloy nanoparticles are exsolved from Ruddlesden-Popper perovskite substrates after the reduction in 5 % H 2 /Ar at 400 °C for 1 h, for electrocatalysis of the nitrogen reduction reaction to ammonia. The host material Pr 4 Ni 1.8 Co 1.2 O 10-δ with embeddable layered structure and stability was deliberately chosen to fix the Ru cation and maximize the catalytic activity of NiCo. Also, density functional theory calculations suggest that Ru doping provides an optimal balance between structural stability and redox activity, facilitating the controlled exsolution of NiCo nanoparticles and enhancing catalytic performance. As a result, the composite electrode with exsolved NiCo alloy and abundant oxygen vacancies on fuel-electrode-supported PCECs achieves a superior electrochemical activity towards ammonia synthesis: a peak ammonia formation rate of 27.84 μg h −1 cm −2 and excellent Faradaic efficiencies of 62.6 % at 350 °C.

30 DIRECT ENERGY CONVERSION↗

Reversible Exsolution of Nanometric Fe 2 O 3 Particles in BaFe 2-x (PO 4 ) 2 (0 ≤ x ≤ 2/3):The Logic of Vacancy Ordering in Novel Metal-Depleted Two-Dimensional Lattices

We show here that the exsolution of Fe 2+ ions out of two-dimensional (2D) honeycomb layers of BaFe 2 (PO 4 ) 2 into iron-deficient BaFe 2–x (PO 4 ) 2 phases and nanometric α-Fe 2 O 3 (typically 50 nm diameter at the grain surface) is efficient and reversible until x = 2/3 in mild oxidizing/reducing conditions. It corresponds to the renewable conversion of 12 wt % of the initial mass into iron oxide. After analyzing single crystal X-ray diffraction data of intermediate members x = 2/7, x = 1/3, x = 1/2 and the ultimate Fe-depleted x = 2/3 term, we then observed a systematic full ordering between Fe ions and vacancies (V Fe ) that denote unprecedented easy in-plane metal diffusion driven by the Fe 2+ /Fe 3+ redox. Besides the discovery of a diversity of original depleted triangular ∞ {Fe 2/3+ 2–x O 6 } topologies, we propose a unified model correlating the x Fe-removal and the experimental Fe/V Fe ordering into periodic one-dimensional motifs paving the layers, gaining insights into predictive crystahemistry of complex low dimensional oxides. When we increased the x values it led to a progressive change of the materials from 2D ferromagnets (Fe2+) to 2D ferrimagnets (Fe2/3+) to antiferromagnets for x = 2/3 (Fe3+).

Alcover, Ignacio Blazquez↗

Atomically Precise Single-Site Catalysts via Exsolution in a Polyoxometalate–Metal–Organic-Framework Architecture

Single-site catalysts (SSCs) achieve a high catalytic performance through atomically dispersed active sites. A challenge facing the development of SSCs is aggregation of active catalytic species. Reducing the loading of these sites to very low levels is a common strategy to mitigate aggregation and sintering; however, this limits the tools that can be used to characterize the SSCs. Here we report a sintering-resistant SSC with high loading that is achieved by incorporating Anderson–Evans polyoxometalate clusters (POMs, MMo 6 O 24 , M = Rh/Pt) within NU-1000, a Zr-based metal–organic framework (MOF). The dual confinement provided by isolating the active site within the POM, then isolating the POMs within the MOF, facilitates the formation of isolated noble metal sites with low coordination numbers via exsolution from the POM during activation. The high loading (up to 3.2 wt %) that can be achieved without sintering allowed the local structure transformation in the POM cluster and the surrounding MOF to be evaluated using in situ X-ray scattering with pair distribution function (PDF) analysis. Notably, the Rh/Pt···Mo distance in the active catalyst is shorter than the M···M bond lengths in the respective bulk metals. Furthermore, models of the active cluster structure were identified based on the PDF data with complementary computation and X-ray absorption spectroscopy analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real-time insight into the multistage mechanism of nanoparticle exsolution from a perovskite host surface

In exsolution, nanoparticles form by emerging from oxide hosts by application of redox driving forces, leading to transformative advances in stability, activity, and efficiency over deposition techniques, and resulting in a wide range of new opportunities for catalytic, energy and net-zero-related technologies. However, the mechanism of exsolved nanoparticle nucleation and perovskite structural evolution, has, to date, remained unclear. Herein, we shed light on this elusive process by following in real time Ir nanoparticle emergence from a SrTiO 3 host oxide lattice, using in situ high-resolution electron microscopy in combination with computational simulations and machine learning analytics. We show that nucleation occurs via atom clustering, in tandem with host evolution, revealing the participation of surface defects and host lattice restructuring in trapping Ir atoms to initiate nanoparticle formation and growth. These insights provide a theoretical platform and practical recommendations to further the development of highly functional and broadly applicable exsolvable materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooling rates for lunar samples determined with a diffusion model for phosphide exsolution

A numerical model for diffusion-controlled phase growth has been applied to the exsolution of phosphide lamellae in lunar metal grains. Computer simulations reproduce observed composition profiles, and reveal the influence of cooling rate on dimensional and compositional parameters of phosphide and metal. At lower cooling rates, phosphide lamellae are larger and the concentration of P in the metal host close to the interface is lower. Cooling rates inferred for Apollo 16 samples, based on compositions and dimensions of the phosphide-metal grains, are mostly in the range 1-100 C/day. These rates correspond to burial depths of 5-0.5 m for melt rocks and 3-0.3 m for breccias. This is in good agreement with thicknesses of lunar cooling units determined by other techniques.

Hewins, R. H.↗