Search NASA⌕ Search

SEARCH · Search NASA

Results for “factories”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Aft segment dome-to-stiffener factory joint insulation void elimination

Since the detection of voids in the internal insulation of the dome-to-stiffener factory joint of the 15B aft segment, all aft segment dome-to-stiffener factory joints were x-rated and all were found to contain voids. Using a full-scale process simulation article (PSA), the objective was to demonstrate that the proposed changes in the insulation layup and vacuum bagging processes will greatly reduce or eliminate voids without adversely affecting the configuration of performance of the insulation which serves as a primary seal over the factory joint. The PSA-8 aft segment was insulated and cured using standard production processes.

Jensen, S. K.↗
NASA NTRS1990

Integrating PCLIPS into ULowell's Lincoln Logs: Factory of the future

We are attempting to show how independent but cooperating expert systems, executing within a parallel production system (PCLIPS), can operate and control a completely automated, fault tolerant prototype of a factory of the future (The Lincoln Logs Factory of the Future). The factory consists of a CAD system for designing the Lincoln Log Houses, two workcells, and a materials handling system. A workcell consists of two robots, part feeders, and a frame mounted vision system.

Mcgee, Brenda J.↗
DOE OSTI2021

Probing Axion-Like-Particles at the CERN Gamma Factory

We report the aim of the proposed CERN Gamma Factory is to produce ≈10 17 photons per second with energies up to 400 MeV. The photon beam intensity is expected to be a factor of $\mathcal{O}$(10 7 ) larger than that of the presently available photon beams in the MeV energy range. In this work, its potential to probe physics beyond the Standard Model is explored. In particular, searches for axion like particles (ALPs) with dominant couplings to photons are discussed and various production scenarios - fixed target, photon-photon collision, and conversion by a magnetic field - and detection schemes considered - via decay to photons or back-conversion. It is found that the Gamma Factory in a fixed target mode can probe ALPs with mass m a ≲ $\mathcal{O}$(100 MeV) and decay constants larger than 10 7 GeV, improving by an order of magnitude the discovery potential of previous beam dump experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Factorial growth at low orders in perturbative QCD: control over truncation uncertainties

A method, known as “minimal renormalon subtraction”, relates the factorial growth of a perturbative series (in QCD) to the power p of a power correction Λ p /Q p . (Λ is the QCD scale, Q some hard scale.) Here, the derivation is simplified and generalized to any p , more than one such correction, and cases with anomalous dimensions. Strikingly, the well-known factorial growth is seen to emerge already at low or medium orders, as a consequence of constraints on the Q dependence from the renormalization group. The effectiveness of the method is studied with the gluonic energy between a static quark and static antiquark (the “static energy”). Truncation uncertainties are found to be under control after next-to-leading order, despite the small exponent of the power correction ( p = 1) and associated rapid growth seen in the first four coefficients of the perturbative series.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Benzene homologues contaminants in a former herbicide factory site: distribution, attenuation, risk, and remediation implication

Benzene homologues often used as organic raw materials or as detergents in chemical industry are prone to accidental release into the environment which can cause serious long-term soil pollutions. In a large former herbicide factory site, we investigated 43 locations for benzene homologues contaminations in soil, soil gas, and groundwater; and studied the hydrogeological conditions. An inverse distance weighted interpolation method was employed to determine the pollutants three-dimensional spatial distribution in the soils. Results showed that benzene homologues residues were mainly originated from the herbicide production workshop; and that the pollution had horizontally expanded at the deeper soil layer. Contaminants had already migrated 15m downward from ground surface. Contaminant phase distribution study showed that NAPL was the primary phase (>99%) for the pollutants accumulated in the unsaturated zone; while it had not migrated to groundwater. The primary mechanism for contaminant transport and attenuation included dissolution of “occluded” NAPL into pore water and pollutant volatilization into soil pore space. Risk assessment revealed that the pollutants brought unacceptable high carcinogenic and non-carcinogenic risks to public health. In order to convert this former chemical processing factory site into a residential area, a remediation to the polluted production workshop sites is urgently required.

Yang, Shuo↗
DOE OSTI2021

Chapter 7 - CRISPR-Based Tools for Microbial Cell Factories

The development of microbial chassis for the production of a variety of biochemicals and biofuels is a growing area of research. How to efficiently manipulate genetic information to achieve optimal production of these compounds is a key area of focus in the field. In recent years, clustered regularly interspaced palindromic repeats (CRISPR) and its associated proteins (Cas) have become a popular strategy for gene editing and regulation in many organisms due to its versatility and efficacy. Here, we describe methods developed utilizing CRISPR-Cas systems for engineering microbial cell factories (e.g., bacteria and yeast) at the single gene to genome scale for mutagenesis and transcriptional regulation of target genes. Finally, we provide a perspective on the challenges and opportunities for the applications of advanced CRISPR-Cas-based tools for engineering microbial cell factories.

BIOMASS FUELS↗
DOE OSTI2020

Exploiting CRIC to streamline the configuration management of GlideinWMS factories for CMS support

GlideinWMS is a workload management and provisioning system that allows sharing computing resources distributed over independent sites. Based on the requests made by GlideinWMS frontends, a dynamically sized pool of resources is created by GlideinWMS pilot factories via pilot job submission to resource sites’ CEs. More than 400 CEs are currently serving more than ten virtual organizations through GlideinWMS, with CMS being the biggest user with 230 CEs. The complex configurations of the parameters defining resource requests, as submitted to those CEs, have been historically managed by manually editing a set of different XML files. New possibilities arise with CMS adopting the CRIC, an information system that collects, aggregates, stores, and exposes, among other things, computing resource data coming from various data providers. The paper will describe the challenges faced when CMS started to use CRIC to automatically generate the GlideinWMS factory configurations. The architecture of the prototype, and the ancillary tools developed to ease this transition, will be discussed. Finally, future plans and milestones will be outlined.

Dost, Jeffrey↗
DOE OSTI2026

Experimental quantum Bernoulli factories via Bell-basis measurements

Randomness processing in the Bernoulli factory framework provides a concrete setting in which quantum resources can outperform classical ones. We experimentally demonstrate quantum randomness processing based on Bell-basis measurements of two identical input quoins prepared on IBM superconducting hardware. Using only the measurement outcomes (and no external classical randomness source), we realize the classically inconstructible Bernoulli doubling primitive f(p)=2p, and, as intermediate outputs from the same Bell-measurement statistics, an exact fair coin f(p)=1/2 and the classically inconstructible function f(p)=4p(1−p). We benchmark the measured output biases against ideal predictions and discuss the impact of device noise. Our results establish a simple resource-efficient experimental primitive for quantum-to-classical randomness processing and support the viability of quantum Bernoulli factories for quantum-enhanced stochastic simulation and sampling tasks.

Roy, Tanay [Fermilab] (ORCID:000000019442862X)↗
DOE OSTI2024

Testing lepton flavor universality at future Z factories

As one of the hypothetical principles in the Standard Model (SM), lepton flavor universality (LFU) should be tested with a precision as high as possible such that the physics violating this principle can be fully examined. The run of a Z factory at a future e + e − collider, such as the Circular Electron-Positron Collider or Future Circular Collider (electron/positron), provides a great opportunity to perform this task because of the large statistics and high reconstruction efficiencies for b hadrons at the Z pole. In this paper, we present a systematic study on the LFU test in future Z factories. The goal is threefold. First, we study the sensitivities of measuring the LFU-violating observables of b → c τ ν , i.e., R J / ψ , R D s , R D s * , and R Λ c , where τ decays muonically. For this purpose, we develop the strategies for event reconstruction, based on the track information significantly. Second, we explore the sensitivity robustness against detector performance and its potential improvement with the message of event shape or beyond the b -hadron decays. A picture is drawn on the variation of analysis sensitivities with the detector tracking resolution and soft photon detectability, and the impact of Fox-Wolfram moments is studied on the measurement of relevant flavor events. Finally, we interpret the projected sensitivities in the SM effective field theory, by combining the LFU tests of b → c τ ν and the measurements of b → s τ + τ − and b → s ν ¯ ν . We show that the limits on the LFU-violating energy scale can be pushed up to ∼ O ( 10 ) TeV for ≲ O ( 1 ) Wilson coefficients at Tera- Z . Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2025

Acceptance dependence of factorial cumulants, long-range correlations, and the antiproton puzzle

We analyze joint factorial cumulants of protons and antiprotons in relativistic heavy-ion collisions and point out that they obey the scaling Ĉnmp,p¯∝〈Np〉n〈Np¯〉m as a function of acceptance when only long-range correlations are present in the system, such as global baryon conservation and volume fluctuations. This hypothesis can be directly tested experimentally without the need for corrections for volume fluctuations. We show that if correlations among protons and antiprotons are driven by global baryon conservation and volume fluctuations only, the equality Ĉ2p/〈Np〉2=Ĉ2p¯/〈Np¯〉2 holds for large systems created in central collisions. We point out that the experimental data of the STAR Collaboration from phase I of the Relativistic Heavy Ion Collider (RHIC) beam energy scan (BES) are approximately consistent with the scaling Ĉnmp,p¯∝〈Np〉n〈Np¯〉m, but the normalized antiproton correlations are stronger than those of protons, −Ĉ2p¯/〈Np¯〉2>−Ĉ2p/〈Np〉2. Existing theoretical baselines, based on global baryon conservation and volume fluctuations, cannot explain the data, which we refer to as the antiproton puzzle. We also discuss high-order factorial cumulants which can be measured with sufficient precision within phase II of RHIC-BES.

Bzdak, Adam↗
DOE OSTI2020

Tau Lepton Physics at a Tau-Charm Factory

A two-day workshop, "The Tau-Charm Factory in the Era of B-factors and CESR," was held at SLAC in August, 1994. This paper summarizes the important research on the tau lepton which could be done at a tau-charm factory in the next decade. It is based on the presentation by the speakers and on the discussions by participants, as well as on published papers.

Perl, M.↗
DOE OSTI2024

Container Factories in the Oak Ridge Research Cloud

This technical report describes an implementation of a devops container factory utilizing ORNL ResearchCloud (ORC) birthright resources. Any researcher or project can implement the strategy described here fortheir CI/CD needs. This is a technology demonstration of using rootless podman as a direct replacementfor docker in a GitLab CI/CD context to enhance security. It is also a stepping stone towardsimplementation of the containerized software factory described in the DoD Enterprise DevSecOpsReference Design.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

ECFA Higgs, electroweak, and top Factory Study

The ECFA Higgs, electroweak, and top Factory Study ran between 2021 and 2025 as a broad effort across the experimental and theoretical particle physics communities, bringing together participants from many different proposed future collider projects. Activities across three main working groups advanced the joint development of tools and analysis techniques, fostered new considerations of detector design and optimisation, and led to a new set of studies resulting in improved projected sensitivities across a wide physics programme. This report demonstrates the significant expansion in the state-of-the-art understanding of the physics potential of future e+e- Higgs, electroweak, and top factories, and has been submitted as input to the 2025 European Strategy for Particle Physics Update.

Altmann, J. [Monash U.]↗
NASA NTRS1966

Calculation of factorials

Method for calculating terms containing products and reciprocals of factorials by using canonical decomposition of each factor in factorials

PROBLEM SOLVING↗
NASA NTRS1977

A factory concept for processing and manufacturing with lunar material

A conceptual design for an orbital factory sized to process 1.5 million metric tons per year of raw lunar fines into 0.3 million metric tons of manufacturing materials is presented. A conservative approach involving application of present earth-based technology leads to a design devoid of new inventions. Earth based counterparts to the factory machinery were used to generate subsystem masses and lumped parameters for volume and mass estimates. The results are considered to be conservative since technologies more advanced than those assumed are presently available in many areas. Some attributes of potential space processing technologies applied to material refinement and component manufacture are discussed.

Driggers, G. W.↗
NASA NTRS1993

An artificial reality environment for remote factory control and monitoring

Work has begun on the merger of two well known systems, VEOS (HITLab) and CLIPS (NASA). In the recent past, the University of Massachusetts Lowell developed a parallel version of NASA CLIPS, called P-CLIPS. This modification allows users to create smaller expert systems which are able to communicate with each other to jointly solve problems. With the merger of a VEOS message system, PCLIPS-V can now act as a group of entities working within VEOS. To display the 3D virtual world we have been using a graphics package called HOOPS, from Ithaca Software. The artificial reality environment we have set up contains actors and objects as found in our Lincoln Logs Factory of the Future project. The environment allows us to view and control the objects within the virtual world. All communication between the separate CLIPS expert systems is done through VEOS. A graphical renderer generates camera views on X-Windows devices; Head Mounted Devices are not required. This allows more people to make use of this technology. We are experimenting with different types of virtual vehicles to give the user a sense that he or she is actually moving around inside the factory looking ahead through windows and virtual monitors.

Kosta, Charles Paul↗
NASA NTRS1995

The Experience Factory: Strategy and Practice

The quality movement, that has had in recent years a dramatic impact on all industrial sectors, has recently reached the system and software industry. Although some concepts of quality management, originally developed for other product types, can be applied to software, its specificity as a product which is developed and not produced requires a special approach. This paper introduces a quality paradigm specifically tailored on the problem of the systems and software industry. Reuse of products, processes and experiences originating from the system life cycle is seen today as a feasible solution to the problem of developing higher quality systems at a lower cost. In fact, quality improvement is very often achieved by defining and developing an appropriate set of strategic capabilities and core competencies to support them. A strategic capability is, in this context, a corporate goal defined by the business position of the organization and implemented by key business processes. Strategic capabilities are supported by core competencies, which are aggregate technologies tailored to the specific needs of the organization in performing the needed business processes. Core competencies are non-transitional, have a consistent evolution, and are typically fueled by multiple technologies. Their selection and development requires commitment, investment and leadership. The paradigm introduced in this paper for developing core competencies is the Quality Improvement Paradigm which consists of six steps: (1) Characterize the environment, (2) Set the goals, (3) Choose the process, (4) Execute the process, (5) Analyze the process data, and (6) Package experience. The process must be supported by a goal oriented approach to measurement and control, and an organizational infrastructure, called Experience Factory. The Experience Factory is a logical and physical organization distinct from the project organizations it supports. Its goal is development and support of core competencies through capitalization and reuse of its cycle experience and products. The paper introduces the major concepts of the proposed approach, discusses their relationship with other approaches used in the industry, and presents a case in which those concepts have been successfully applied.

Basili, Victor R.↗
DOE OSTI2021

ILC: Beyond Higgs Factory

The first stage of the International Linear Collider is one of the contenders for a “Higgs factory”, as prioritised by the recent update of the European Strategy for Particle Physics. This article highlights the physics opportunities beyond its Higgs factory program, which is enabled by high luminosity, the polarised beams and the triggerless operation of the detectors, as well as the energy-extendability of the accelerator as key features of Linear Colliders.

List, Jenny↗