Search NASA⌕ Search

SEARCH · Search NASA

Results for “feedstock harvest”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Improved Advanced Biomass Logistics Utilizing Woody and other Feedstocks in the Northeast and Pacific Northwest (Final Report)

Willow and poplar short rotation woody crops (SRWC) have shown promise with regards to environmental benefits and rural development but wide adoption lags due to underdeveloped markets and supply systems. High costs associated with harvesting, handling and transportation (40-60% of delivered cost) have impeded expansion. A better understanding of these systems will create opportunities to improve efficiency, reduce costs, and realize environmental benefits and impacts. The project’s goal was to lower the delivered cost of hybrid poplar in the Northwest and willow in the Northeast by optimizing harvesting and logistics supply systems while maintaining or improving biomass quality along the supply chain. Over 3,400 Mg of biomass and 300 ha of willow and poplar were monitored over a range of crop and field conditions. Feedstock quality as affected by storage and preprocessing were shown to improve or maintain feedstock quality. Modeled harvesting costs ranged from $38–61 Mg -1 dry; when including delivery and preprocessing feedstock costs ranged between $79-83 Mg -1 dry for willow and $106-116 Mg -1 dry for poplar. Costs for willow minimized when hot water extraction and high-moisture densification preprocessing were used. Models also suggest that social and regional factors could further reduce costs. Results will give guidance to feedstock growers, harvesting and logistic operations, biorefinery project developers, and policy makers developing SRWC to support a growing bioeconomy.

, biomass↗
DOE OSTI2022

Techno‐economic assessment of single‐stream feedstock logistics supply chain for corn stover and grain

Abstract The state‐of‐technology for corn stover harvest is a multi‐pass system that collects the stover after grain harvest. An alternative is a single‐stream system where the grain and stover are harvested as a bulk material co‐stored and preserved by anerobic fermentation, and finally, co‐transported to a biorefinery. In the present work, four single‐pass whole‐plant bulk systems were compared with a conventional multi‐pass bale system. The single‐stream systems consisted of the harvest of corn grain and a portion of the stover fraction. Four machine configurations were simulated. This work predicted that a multi‐pass bale system would result in a material cost of 111.80 $2021 Mg –1 stover DM delivered to the biorefinery gate. Alternatively, the lowest cost single‐stream system was the self‐propelled forage harvester (SPFH) configured with the whole‐plant header, which delivered feedstock for 74.76 $2021 Mg stover DM –1 . In addition to machine configuration, a sensitivity analysis was performed to understand important drivers of feedstock cost. These analyses revealed that feedstock cost increased with moisture content, fertilizer price, and biorefinery size, and decreased with harvest season length, crop yield, and grower participation. This work demonstrated that single‐stream systems could reduce corn stover feedstock costs in comparison with state‐of‐technology systems. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2024

Nth-plant scenario for blended pellets of Miscanthus, Switchgrass, and Corn Stover using multi-modal transportation: Biorefineries and depots in the contiguous U.S.

The sustainability of the biofuel industry depends on the development of a mature conversion technology on a national level that can take advantage of the economies of scale: the nth-plant. Here, this study addresses the logistic challenge of mobilizing national cellulosic feedstock supplies for a sustainable bioenergy industry. A Mixed Integer Linear Programming (MILP) model was developed and updated to deliver on-spec biomass that considers both a desired quantity and quality at the biorefinery. Our supply chain analysis includes multi-modal transport (truck and rail), varying depot and biorefinery sizes, and feedstock blends of corn stover (harvested by either a two- or three-pass method), switchgrass, and miscanthus. The following US states: Illinois, Kansas, Missouri, North Carolina, Oklahoma, Georgia, and Texas were identified as key locations for producing accessible miscanthus. Based on our most optimistic scenario, using trucks as the only transportation mode in 2040 with a cost target of $\$$79/dt, corn stover, switchgrass, and miscanthus could help meet 48% of the EPA target, 173 million dry tons that translate into 7.8 billion GGE. The addition of rail transportation for biomass delivery to biorefineries could help meet 79% of the EPA target, 283 million dry tons that translate into 12.7 billion GGE.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Designing Harvesting and Hauling Cost Models for Energy Cane Production for Biorefineries

The harvesting and hauling operations of bioenergy feedstock is an important area in biofuel production. Production costs can be minimized by maintaining optimal machinery units for these operations. The objective of this study is to design an optimal harvesting unit for bioenergy refinery and estimate harvesting and hauling costs of energy cane. A biorefinery with the annual capacity of processing twenty-five million imp. gallons of ethanol were considered. Given the efficiency of harvesting, a two-row soldier system was considered. Considering the year-round supply of energy cane to the refinery, the optimal machinery unit was designed, and the combined operation costs were derived. The average estimated ownership, repair, labor and fuel and lubricant costs of biomass harvest unit were calculated to be $\$$0.50, $\$$0.54, $\$$1.78 and $\$$1.51/mt, respectively. The costs distribution generated showed harvesting and hauling costs could range between $\$$5.47–$\$$9.23/mt of energy cane. The methodology and the research output will provide guidelines for investors in designing harvesting and hauling units and estimating costs for different scales of operation.

09 BIOMASS FUELS↗
DOE OSTI2020

Herbaceous Feedstock 2019 State of Technology Report

The U.S. Department of Energy (DOE) promotes the production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the State of Technology (SOT). As part of its involvement with this mission, Idaho National Laboratory (INL) completes an annual SOT report for biomass feedstock logistics. This report summarizes supply system impacts of Bioenergy Technologies Office (BETO)-funded research and development efforts at INL and elsewhere (such as the High-Tonnage Feedstock Logistics projects (Webb et al. 2013a, Webb et al. 2013b, Webb et al. 2013c, Webb and Sokhansanj 2014, Sokhansanj et al. 2014)) that lead to improvements in feedstock supply systems. These include improvements to and observed performance of innovative harvest and collection methods, storage technologies, transportation and handling approaches, and advanced preprocessing technologies. Biomass quality and variability, and the interface between feedstock quality and conversion performance are key drivers in addition to delivered feedstock cost. In this report, we estimate the benefits of R&D improvements to individual supply system unit operations and present the status of feedstock logistics technology development for converting biomass into biofuels. These analyses are supported by experimental data where possible and help to align the SOT relative to the cost goals defined in the Multi-Year Program Plan. The 2019 Herbaceous SOT incorporates several technology changes in feedstock preprocessing and introduces opportunities from the integrated landscape management (ILM) strategy and increased grower participation to reduce biomass access costs, while maintaining or improving grower profitability. During FY18 uneven flow from the horizontal bale grinder was identified as a significant issue limiting preprocessing system throughput. Based on FSL-funded research at INL, the 2019 Herbaceous SOT replaces the horizontal bale grinder used in the first stage size reduction with a bale processor. The improved uniformity of biomass flow entering the PDU eliminated slugging flow from the first stage size reduction and improved the throughput of downstream operations. In order to achieve moisture reduction through frictional heating during grinding (which allowed elimination of the costly rotary drum dryer in previous SOTs), the second stage grinder was changed from a rotary shear, which does not remove moisture, back to a hammer mill. Finally, the 2019 Herbaceous SOT introduces modified three-pass and two-pass corn stover supply curves derived from the BT16 resource assessment, based on FY19 modeling results (WBS 4.2.1.20) quantifying economic benefits of ILM in the supply area, together with modeling results (WBS 1.2.1.5) identifying ILM strategies to increase grower participation. The 2019 Herbaceous SOT report documents the current modeled cost of an herbaceous feedstock supply system from harvest to the pretreatment reactor throat for hydrocarbon fuel production via biochemical conversion, based on equipment and processes now available or potentially available in the near term. The modeled cost also considers both the required quality and the availability of the biomass resources. The 2019 Herbaceous SOT predicts a modeled delivered feedstock cost of $81.37 /dry ton (2016$); this is a $2.30/dry ton (2016$) decrease from the 2018 Herbaceous SOT. Technology improvements that contributed to this modeled cost reduction include reduced cost for the new preprocessing design and quantification of the opportunities of the integrated landscape management (ILM) strategy and an increased grower participation rate to reduce the grower payment portion of biomass access costs, while maintaining or improving grower profitability. A greenhouse gas emissions (GHG) assessment was completed by Argonne National Laboratory using the 2019 Greenhouse Gases, Regulated Emissions, and Energy use in Transportation model, estimating an increase of 14.89 kg CO2e/ton from the 2018 SOT (69.27 kg CO2e/ton in 2018 to 84.16 kg CO2e/ton in 2019). The increase of energy consumption during preprocessing along with higher transportation distance to access low cost biomass from further distance contributed to the increase of GHG emissions in the 2019 Herbaceous SOT. The reason for the increased transportation distances was the cost tradeoff of going farther from the biorefinery to access the cheaper ILM-derived counties (the cheaper price outweighed the cost of increased supply radius).

09 BIOMASS FUELS↗
DOE OSTI2020

Herbaceous Feedstock 2018 State of Technology Report

The U.S. Department of Energy (DOE) promotes the production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the state of technology (SOT). As part of its involvement with this mission, Idaho National Laboratory (INL) completes an annual SOT report for biomass feedstock logistics. This report summarizes supply system impacts of Bioenergy Technologies Office (BETO)-funded research and development efforts at INL and elsewhere (such as the High-Tonnage Feedstock Logistics projects (Webb et al. 2013a, Webb et al. 2013b, Webb et al. 2013c, Webb and Sokhansanj 2014, Sokhansanj et al. 2014) that lead to improvements in feedstock supply systems. These include improvements to and observed performance of innovative harvest and collection methods, storage technologies, transportation and handling approaches, and advanced preprocessing technologies. Biomass quality and variability, and the interface between feedstock quality and conversion performance are key drivers in addition to delivered feedstock cost. In this report, we estimate the benefits of R&D improvements to individual supply system unit operations, and present the status of feedstock logistics technology development for converting biomass into biofuels. These analyses are supported by experimental data where possible, and help to align the SOT relative to the cost goals defined in the Multi-Year Program Plan. The 2018 Herbaceous SOT aligned feedstock logistic design with current biorefinery’s design capacity utilized by biochemical conversion platform. Currently biochemical conversion platform utilizes a 725,000 dry ton/year biorefiney design for the techno economic analysis. Hence, feedstock delivered cost in the 2018 Herbaceous SOT is calculated based on biorefinery’s 725,000 dry ton design capacity instead of 800, 000 dry ton capacity utilized in the 2017 Herbaceous SOT. Biomass availabilities in this SOT were updated to year 2018 data from the 2016 Billion-Ton Report (BT16) (DOE 2016a), with the exception of switchgrass, for which the 2018 Herbaceous SOT utilized the 2019 switchgrass availability data from BT16. The BT16 report (DOE 2016a) does not project switchgrass availability in 2018; the soonest switchgrass is available in the BT16 report is 2019. Therefore, availability of switchgrass for this analysis was that projected for 2019. The 2018 Herbaceous SOT incorporates same technologies utilized in the 2017 Herbaceous SOT. However, a sensitivity analysis is performed to understand the impact of variation of process parameters on those technologies on feedstock logistic cost. New R&D data that shows the variations of process parameters affecting process performance is incorporated in the 2018 SOT to measure the variations in delivered feedstock cost. The 2018 Herbaceous SOT has also provided projected delivered feedstock of 2022 design case based on near term technical target under BETO funded R&D project. Finally, updated biorefinery size of 725,000 dry ton/year was incorporated within least-cost formulation model to select optimal siting and depot scales during optimization of the least cost blend. This modification to the optimization algorithm allows the trade-off between the cost of increased supply radius and the savings from selecting biomass from higher producing counties to be assessed. Such optimization has also showed the economic benefit of decentralized depots in comparison to centralized preprocessing co-located with the biorefinery by decoupling the biorefinery and feedstock locations. The 2018 Herbaceous SOT report documents the current modeled cost of a herbaceous feedstock supply system (from harvest to the pretreatment reactor throat, including grower payment) for hydrocarbon fuel production via biochemical conversion, based on equipment and processes now available or potentially available in the near term. The modeled cost also considers both the required quality and the availability of the biomass resources. The 2018 Herbaceous SOT predicts a modeled delivered feedstock cost of $83.67/dry ton (2016$); this is a $0.23/dry ton (2016$) decrease from the 2017 Herbaceous SOT. The modification of biorefinery’s designed capacity and increased projected biomass availability in the same supply shed contributed to this modeled cost reduction. The least-cost formulation model to optimally site and scale local distributed preprocessing depots also contributed to the cost reduction by considering county-level grower payment and distance from the biorefinery as variables in the optimization algorithm. Sensitivity analysis on various process parameters that affect delivered feedstock cost in the 2018 Herbaceous SOT shows that the delivered cost could varies from $80.45-$88.83/dry ton. The top factors that causes such variations are: effective baling rate, bale density, hammer mill throughput, interest rate and storage dry matter loss.

09 BIOMASS FUELS↗
DOE OSTI2022

At-Line Sampling and Characterization of Pyrolytic Vapors from Biomass Feedstock Blends Using SPME-GC/MS-PCA: Influence of Char on Fast Pyrolysis

Solid-phase microextraction (SPME) coupled with GC-MS analysis was used for at-line sampling of pyrolytic vapors produced during fast pyrolysis of biomass. The pure and binary blends of switchgrass (SWG) and pine harvest residues (PT6) were used as feedstock. Sequential SPME sampling allowed for monitoring of changes in the pyrolysis vapors as char accumulated in the fluid bed. The concentration and composition of the vapors desorbed from the SPME fibers were investigated using GC-MS, and the data sets were then analyzed using principal component analysis (PCA) to compare the composition of the pyrolysis vapors over the course of the pyrolysis run. The chemical composition of both carbohydrate and lignin fragments varied as the char builds up in the reactor bed. Fragments derived from cellulose and xylan included anhydrosugars, furans and light oxygenated compounds. Lignin fragments included methoxyphenols, phenolic ketones and aldehydes, low molecular weight aromatics. The composition of the carbohydrate fragments changed more than the lignin fragments as the char build-up in the fluid bed. This combination of SPME-GC/MS-PCA were a novel, easy and effective method for measuring the composition and changes in the composition of pyrolysis vapors during the fast pyrolysis process. Here, this work also highlighted the effect of char build-up on the composition of the overall pyrolysis vapors.

09 BIOMASS FUELS↗
DOE OSTI2020

Bioinspiration in light harvesting and catalysis

Capturing and converting solar energy into fuels and feedstocks is a global challenge that spans numerous disciplines and fields of research. Billions of years of evolution have allowed natural organisms to hone strategies for harvesting light from the sun and storing energy in the form of carbon–carbon and carbon–hydrogen bonds. Photosynthetic antenna proteins capture solar photons and funnel photoexcitations to reaction centres with high yields, and enzymes catalyze multi-electron reactions, facilitating chemical transformations not yet efficiently implemented using artificially engineered catalysts. Researchers in renewable energy often look to nature to understand the mechanisms at work and, if possible, to explore their translation into artificial systems. Here, we review advances in bioinspiration across the fields of biological light harvesting and chemical energy conversion. We examine how multi-photon and multi-electron reactions in biology can inspire new methods in photoredox chemistry to achieve novel, selective and complex organic transformations; how carbonic-dehydrogenase-inspired design principles enable catalytic reactions such as the conversion of CO 2 into useful products such as fuels; and how concepts from photosynthetic antenna complexes and reaction centres can benefit artificial light-harvesting materials. We then consider areas in which bioinspiration could enable advances in the rational design of molecules and materials, the expansion of the synthetic capabilities of catalysts and the valorization of molecular building blocks. Here, we highlight the challenges that must be overcome to realize these advances and propose new directions that may use bioinspiration to achieve them.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Estimating Switchgrass Biomass Yield and Lignocellulose Composition from UAV-Based Indices

Innovative methods for estimating commercial-scale switchgrass yields and feedstock quality are essential to optimize harvest logistics and biorefinery efficiency for sustainable aviation fuel production. This study utilized vegetation indices (VIs) derived from multispectral images to predict biomass yield and lignocellulose concentrations of advanced bioenergy-type switchgrass cultivars (“Liberty” and “Independence”) under two N rates (28 and 56 kg N ha –1 ). Field-scale plots were arranged in a randomized complete block design (RCBD) and replicated three times at Urbana, IL. Multispectral images captured during the 2021–2023 growing seasons were used to extract VIs. The results show that linear and exponential models outperformed partial least square and random forest models, with mid-August imagery providing the best predictions for biomass, cellulose, and hemicellulose. The green normalized difference vegetation index (GNDVI) was the best univariate predictor for biomass yield (R 2 = 0.86), while a multivariate combination of the GNDVI and normalized difference red-edge index (NDRE) enhanced prediction accuracy (R 2 = 0.88). Cellulose was best predicted using the NDRE (R 2 = 0.53), whereas hemicellulose prediction was most effective with a multivariate model combining the GNDVI, NDRE, NDVI, and green ratio vegetation index (GRVI) (R 2 = 0.44). These findings demonstrate the potential of UAV-based VIs for the in-season estimation of biomass yield and cellulose concentration.

09 BIOMASS FUELS↗
DOE OSTI2021

Impact of Harvest on Switchgrass Leaf Microbial Communities

Switchgrass is a promising feedstock for biofuel production, with potential for leveraging its native microbial community to increase productivity and resilience to environmental stress. Here, we characterized the bacterial, archaeal and fungal diversity of the leaf microbial community associated with four switchgrass (Panicum virgatum) genotypes, subjected to two harvest treatments (annual harvest and unharvested control), and two fertilization levels (fertilized and unfertilized control), based on 16S rRNA gene and internal transcribed spacer (ITS) region amplicon sequencing. Leaf surface and leaf endosphere bacterial communities were significantly different with Alphaproteobacteria enriched in the leaf surface and Gammaproteobacteria and Bacilli enriched in the leaf endosphere. Harvest treatment significantly shifted presence/absence and abundances of bacterial and fungal leaf surface community members: Gammaproteobacteria were significantly enriched in harvested and Alphaproteobacteria were significantly enriched in unharvested leaf surface communities. These shifts were most prominent in the upland genotype DAC where the leaf surface showed the highest enrichment of Gammaproteobacteria, including taxa with 100% identity to those previously shown to have phytopathogenic function. Fertilization did not have any significant impact on bacterial or fungal communities. We also identified bacterial and fungal taxa present in both the leaf surface and leaf endosphere across all genotypes and treatments. These core taxa were dominated by Methylobacterium, Enterobacteriaceae, and Curtobacterium, in addition to Aureobasidium, Cladosporium, Alternaria and Dothideales. Local core leaf bacterial and fungal taxa represent promising targets for plant microbe engineering and manipulation across various genotypes and harvest treatments. Our study showcases, for the first time, the significant impact that harvest treatment can have on bacterial and fungal taxa inhabiting switchgrass leaves and the need to include this factor in future plant microbial community studies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Signatures of Biologically Driven Hemicellulose Modification Quantified by Analytical Pyrolysis Coupled with Multidimensional Gas Chromatography Mass Spectrometry

Biomass storage operation is one major source of feedstock quality variability that impacts on downstream preprocessing, feeding, handling and conversion into biofuels, chemicals and products. In field Ccorn stover biomass bales undergoes degradation and cell wall components modification resulting from microbial biological heating occurring during storage. A molecular characterization of the modification was achieved to unveil and understand the changes of structural cell wall modification in corn stover samples by conducting low temperature (400°C) pyrolysis, comparing samples that were mildly biologicallyun heated to those that had been subjected to microbial severe biological heating (~60°C). Pyrolysis of the samples originating from biomass that had been heated during storage generated small oxygenates such as furfural, 5-methylfurfural and 2-(5H)-furanone with efficiencies that were as much as ten times greater than those measured for the mildly unheated samples. Most of the compounds having enhanced efficiencies were C5 oxygenates, suggesting that the pyrolysis products may be formed from hemicellulosic precursor polymers in the corn stover. The findings suggest that microbial heating may be disrupting the cell wall structure, fragmenting the hemicellulose or cellulose chains, generating more polymer termini that have higher efficiency for generating the oxygenates at lower temperatures. Pyrolysis variability with temperature may be a beneficial strategy for improved biomass cell wall characterization, and for guiding control strategies for enhanced control over product distributions , providing insights to understand and manage the feedstock variability as well as to inform harvest and storage best management practices.

09 BIOMASS FUELS↗
DOE OSTI2021

Corn Stover Removal Responses on Soil Test P and K Levels in Coastal Plain Ultisols

Corn (Zea mays L.) stover is used as a biofuel feedstock in the U.S. Selection of stover harvest rates for soils is problematic, however, because excessive stover removal may have consequences on plant available P and K concentrations. Our objective was to quantify stover harvest impacts on topsoil P and K contents in the southeastern U.S. Coastal Plain Ultisols. Five stover harvest rates (0, 25, 50, 75 and 100% by wt) were removed for five years from replicated plots. Grain and stover mass with P and K concentration data were used to calculate nutrient removal. Mehlich 1 (M1)-extractable P and K concentrations were used to monitor changes within the soils. Grain alone removed 13–15 kg ha –1 P and 15–18 kg ha –1 K each year, resulting in a cumulative removal of 70 and 85 kg ha –1 or 77 and 37% of the P and K fertilizer application, respectively. Harvesting stover increased nutrient removal such that when combined with grain removed, a cumulative total of 95% of the applied P and 126% of fertilizer K were taken away. This caused M1 P and K levels to decline significantly in the first year and even with annual fertilization to remain relatively static thereafter. For these Ultisols, we conclude that P and K fertilizer recommendations should be fine-tuned for P and K removed with grain and stover harvesting and that stover harvest of >50% by weight will significantly decrease soil test M1 P and K contents.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The practice and economics of hybrid poplar biomass production for biofuels and bioproducts in the Pacific Northwest

Hybrid poplar demonstration-scale farms were managed in Oregon, Washington, Idaho, and California to establish management practices, yields, harvesting methods, and the economics of biomass production. Yield during the 2-year establishment cycle averaged 3.5 dry Mg ha –1 year –1 increasing to 11.6 Mg ha –1 year –1 in the ensuing 3-year coppice cycle. Populus deltoides (Bartram ex Marsh.) × P. maximowiczii (Henry) varieties preformed best in Oregon during the coppice cycle with the best variety producing 18.1 Mg ha –1 year –1 , while P. ×generosa (Henry) varieties maximized yields in Washington at 22.1 Mg ha –1 year –1 . P. ×canadensis (Moench) varieties excelled in Idaho and California with upper yields of 13.6 Mg ha –1 year –1 and 12.9 Mg ha –1 year –1 , respectively. Stands were cut with a single-pass harvester 2 years after planting and a second time after 3 years of coppice growth; material capacity, limited by poor ground conditions, varied between 21.7 to 31.3 green Mg h –1 . Chemical composition averaged 1.87% inorganics, 7.74% extractives, 26.90% lignin, 38.07% glucan, 13.66% xylan, 1.61% galactan, 1.14% arabinan, and 2.76% mannan. Production costs (USD) projected over a 20-year rotation of six coppice cycles were $71.81 Mg –1 in Washington, $89.91 Mg –1 in Oregon, $98.76 Mg–1 in Idaho, and 179.07 Mg–1 in California. Here, land rental, establishment, crop care, harvest, transportation, and land restoration, respectively, accounted for 23%, 5%, 19%, 30%, 17%, and 6% of total feedstock cost. Farms were successfully restored to conditions existing before poplar conversion. In the absence of fertilization, increases in soil pH and decreases in nitrate-nitrogen, zinc, iron, and organic matter were consistently noted but could not be associated with poplar production alone.

09 BIOMASS FUELS↗
DOE OSTI2026

Root of the matter-Impacts of harvest frequency on soil C and nutrients in switchgrass

We evaluated how harvest frequency affected plant C allocation and soil-water nutrient concentrations in a switchgrass (Panicum virgatumL.) system on the Eastern Shore of Maryland, U.S.A. Switchgrass established in 2023 was harvested once (1Cut), twice (2Cut), or three times (3Cut) during the 2024 growing season to represent potential feedstock-management regimes for anaerobic digestion. Aboveground biomass was measured at each harvest, and root biomass distribution, root C stocks, and soil properties were assessed to 60 cm after the growing season. During 2025, rainfall-synchronized soil water collected with tension lysimeters was analyzed for dissolved inorganic nitrogen (DIN) and inorganic phosphate (Pi) concentrations.

09 BIOMASS FUELS↗
DOE OSTI2021

Herbaceous Feedstock 2021 State of Technology Report

The U.S. Department of Energy (DOE) promotes the production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the State of Technology (SOT). As part of its involvement with this mission, Idaho National Laboratory (INL) completes an annual SOT report for biomass feedstock logistics. This report summarizes supply system impacts of Bioenergy Technologies Office (BETO)-funded research and development efforts at INL and INL collaboration with external partners (e.g. Forest Concepts, Purdue University ) that lead to improvements in feedstock supply systems. These include improvements to and observed performance of innovative harvest and collection methods, storage technologies, transportation and handling approaches, and advanced preprocessing technologies. Biomass quality and variability, and the interface between feedstock quality and conversion performance are key drivers in addition to delivered feedstock cost. In this report, we estimate the benefits of R&D technology improvements to individual supply system unit operations and present the status of feedstock logistics technology development for converting herbaceous biomass into biofuels. These analyses are supported by experimental data where possible and help to align the SOT relative to the cost goals defined in the Multi-Year Plan.

09 BIOMASS FUELS↗
DOE OSTI2020

Corn stover harvest reduces soil CO 2 fluxes but increases overall C losses

Abstract Harvesting corn ( Zea mays L.) stover for use as bioenergy feedstock may provide short‐term economic benefits and perhaps improve grain yield in continuous corn systems, but excessive stover removal may lead to long‐term depletion of soil C stocks. To better quantify the impacts of stover harvest on the soil C balance, we investigated CO 2 fluxes under three harvest treatments (none, moderate, and high) in three continuous corn systems: (a) no tillage and no biochar applications, (b) chisel plowing with biochar amendments, and (c) chisel plowing without biochar amendments were quantified. We sampled static chambers 14, 13, and 15 times in 2010, 2011, and 2012, respectively, and the measurements were used to calibrate the Agricultural Production Systems sIMulator model. Although CO 2 ‐C emissions did not differ among the three systems, both moderate (approximately 30%) and high (approximately 60%) stover removal rates reduced simulated CO 2 ‐C emissions by nearly 10% and more than 22%, respectively. Despite these reductions in CO 2 flux, the sum of CO 2 ‐C and stover C exceeded CO 2 ‐C losses in those plots without stover removal. This finding suggested soil C depletion was occurring for the soil and crop management practices used, even though depletion was not evident after 3 years. Application of biochar increased soil C levels, suggesting it may be able to offset some C losses. We conclude that for sustainable, highly productive agroecosystems that include stover harvest, all agronomic practices must be optimized to minimize C losses and maintain soil quality.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Corn Stover Fractions from Different Harvest Conditions

There is a lot of variability in biomass. This variability can make it difficult to process the biomass into a consistent format for handling and conversion. As a result, bioenergy feedstocks are often under- or over-converted. Corn stover in particular can be harvested in different ways, baled in different ways, and has significant intrinsic variability due to its very different anatomies. These factors could cause variability in the fractions of corn stover. The fractions of corn stover are leaf, husk, cob, and stalk.

09 BIOMASS FUELS↗