Search NASA⌕ Search

SEARCH · Search NASA

Results for “ferroelectric capacitors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ultrahigh capacitive energy density in ion-bombarded relaxor ferroelectric films

Dielectric capacitors can store and release electric energy at ultrafast rates and are extensively studied for applications in electronics and electric power systems. Among various candidates, thin films based on relaxor ferroelectrics, a special kind of ferroelectric with nanometer-sized domains, have attracted special attention because of their high energy densities and efficiencies. We show that high-energy ion bombardment improves the energy storage performance of relaxor ferroelectric thin films. Intrinsic point defects created by ion bombardment reduce leakage, delay low-field polarization saturation, enhance high-field polarizability, and improve breakdown strength. We demonstrate energy storage densities as high as ~133 joules per cubic centimeter with efficiencies exceeding 75%. Deterministic control of defects by means of postsynthesis processing methods such as ion bombardment can be used to overcome the trade-off between high polarizability and breakdown strength.

Kim, Jieun↗
DOE OSTI2023

Applied in-plane strain effects on the polarization response of ferroelectric hafnium zirconium oxide thin films

The influence of biaxial stress on the maximum and remanent polarizations of 10 nm thick hafnium zirconium oxide thin films in metal–ferroelectric–metal capacitor structures has been quantified. In the as-prepared state with a nominal biaxial tensile strain of 0.20% and no applied extrinsic stress, remanent and maximum polarizations of 7.6 and 13.1 μC/cm 2 , respectively, were measured using a 2 MV/cm applied electric field. Reducing the intrinsic strain by 0.111% through the application of a compressive uniaxial stress results in a decrease in the remanent and maximum polarizations to 6.8 and 12.2 μC/cm 2 , respectively. Here, the polarization dependence on strain is nearly linear between these values. The observed variation in polarization with strain is consistent with strain impacting ferroelastic switching whereby in-plane tension increases the fraction of the short polar axis orienting out-of-plane, hence increasing out-of-plane polarization. In contrast, reducing the in-plane strain through compression results in an increase in the fraction of the long non-polar axis orienting out-of-plane, thereby decreasing out-of-plane polarization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

On the Feasibility of 1T Ferroelectric FET Memory Array

To fully exploit the ferroelectric field effect transistor (FeFET) as compact embedded nonvolatile memory for various computing and storage applications, it is desirable to use a single FeFET (1T) as a unit cell and arrange the cells into an array. However, many write mechanisms for an 1T FeFET array reported in the literature are yet to be validated experimentally. In this work, we performed a comprehensive experimental characterization on the write operations in an 1T- NOR and 1T- AND array using n-channel bulk FeFETs. We discovered that: 1) the source/drain contact can only supply minority carriers (i.e., electrons) to the channel for polarization screening during the low- V TH state programming; 2) the body contact can not only supply majority carriers (i.e., holes) for efficient high- V TH state write, but also depletion charge for low- V TH state programming, though with lower efficiency; and 3) during the low/high- V TH programming, only the path that can supply negative/positive screening charges, respectively, need to respond, which necessitates the application of proper write biases on the corresponding terminal. Based on the understanding of these write mechanisms, we show the importance of localized body contact or column-wise body contact for the successful high- V TH state programming. We also show that the previously proposed C- AND write scheme fails to program the FeFET to the low- V TH state for our devices. Finally, we propose several write schemes for both 1T- AND and 1T- NOR arrays for various scenarios providing insights for choosing the appropriate write scheme, which will facilitate the adoption of 1T FeFET memory arrays for emerging applications.

FeFET↗
DOE OSTI2026

Electrode chemistry impact on retention performance of ferroelectric hafnium zirconium oxide (Hf 0.5 Zr 0.5 O 2−x ) capacitors

Polarization retention of 10 nm thick ferroelectric hafnium zirconium oxide (Hf 0.5 Zr 0.5 O 2−x , HZO) capacitors with W and TaN electrodes is investigated over temperatures ranging from 85 to 150 °C. Same state and opposite state polarization margins for devices with W electrodes show minimal retention loss after 10 5 at 150 °C. The devices capped with TaN electrodes show excellent same state retention, but the opposite state polarization margin in the TaN-electrode devices displays 40% retention loss at 150 °C after 10 5 s. The TaN-capped devices exhibit a more pronounced imprint, which is attributed to an increased oxygen vacancy content (compared to W-capped devices). The increased oxygen vacancy content in the TaN-capped devices is supported by photoluminescence and leakage current measurements. In addition, TaN-capped devices have chemically diffuse electrode–HZO interfaces; more abrupt interfaces are present in the W-capped devices. The presence of interfacial phases in the TaN-capped devices may lead to larger depolarization fields due to reduced charge screening. The results from this study provide further evidence that for HZO ferroelectric devices the electrode can significantly impact polarization retention behavior due to differences in oxygen vacancy concentration and formation of non-ferroelectric interfacial layers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Towards Scalable 3D Integration of 2T-nC FeRAM with Hundreds of Layer Stacking

In this article, we study the limits of the number of capacitors and read history dependence in a 2T-nC ferroelectric random-access memory (FeRAM) cell, paving the way for its high-density integration toward hundreds of stacked layers. Through a comprehensive experimental and simulation study on the scaling behavior of the 2T-nC FeRAM architecture, we demonstrate: (i) successful fabrication of 2T-64C cells with robust memory operation and clearly distinguishable ‘0’ and ‘1’ states, even in 64- capacitor configurations; (ii) that the parasitic capacitance of the floating node originates predominantly from the linear component of the ferroelectric capacitor, and its impact on n-scaling—due to degraded sense margin—can be mitigated by floating unselected capacitors with enough TΩ isolation; (iii) that sharing write and read transistors among n capacitors introduces a read history dependence issue due to fluctuating floating node voltage (VFN); and (iv) that a proposed FN discharge scheme can effectively eliminate read-sequence dependence, at the cost of reduced read endurance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ionic Control over Ferroelectricity in 2D Layered van der Waals Capacitors

The van der Waals layered material CuInP 2 S 6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneous polarization. Therefore, Cu migration across the lattice results in unusual ferroelectric behavior. Here, we demonstrate how the interplay of polar and ionic properties provides a path to ionically controlled ferroelectric behavior, achieved by applying selected DC voltage pulses and subsequently probing ferroelectric switching during fast triangular voltage sweeps. Using current measurements and theoretical calculations, we observe that increasing DC pulse duration results in higher ionic currents, the buildup of an internal electric field that shifts polarization loops, and an increase in total switchable polarization by ~50% due to the existence of a high polarization phase which is stabilized by the internal electric field. Apart from tuning ferroelectric behavior by selected square pulses, hysteretic polarization switching can even be entirely deactivated and reactivated, resulting in three-state systems where polarization switching is either inhibited or can be performed in two different directions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Compact Ferroelectric Programmable Majority Gate for Compute-in-Memory Applications

In this study, a compact and novel ferroelectric (FE) programmable majority gate is proposed and its novel application in Binary Neural Network (BNNs) is investigated. We demonstrate: i) by integrating N metal-ferroelectric-metal (MFM) capacitors on the gate of a transistor (1T-N-MFM structure), a nonvolatile and programmable majority (MAJ) gate that performs MAJ of AND between the gate input and polarization is realized; ii) validation the functionality of our 3-input MAJ of AND gate through comprehensive theoretical and experimental investigations; iii) a compact implementation of 3-input MAJ of XNOR gate that leverages only five of our 3-input MAJ of AND gates connected in parallel; iv) application of MAJ of XNOR gates to replace the XNOR gates and the first layer of the adder tree in the BNNs for up to 21x area saving on top of eliminating the energy-hungry memory accesses due to the compute-in-memory nature.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Dual Mechanism for Transient Capacitance Anomaly in Improper Ferroelectrics

Negative capacitance (NC) effects in ferroelectrics can potentially break fundamental limits of power dissipation known as “Boltzmann tyranny.” However, the origin of transient NC of ferroelectrics, which is attributed to two different mechanisms involving free-energy landscape and nucleation, is under intense debate. Here, we report the coexistence of transient NC and an S-shaped anomaly during the switching of ferroelectric hexagonal ferrites capacitor in an RC circuit. The early-stage NC arises from the nucleation process, while the late-stage S-shaped anomaly corresponds to a nascent NC associated with the free-energy landscape. The entire waveform can be reproduced using a hybrid model that simultaneously incorporates these two mechanisms. These results highlight the multivariable free-energy landscape of hexagonal ferrites that enables an abrupt change of the internal field and demonstrate that the two mechanisms are not mutually exclusive, resolving the long-standing debate. In conclusion, the behavior of the S-shaped anomaly also provides a pathway to extract parameters of free-energy landscape and switching dynamics.

Capacitance↗
DOE OSTI2023

Impacts to FeRAM design arising from interfacial dielectric layers and wake up modulation in ferroelectric hafnium zirconium oxide

As ferroelectric hafnium zirconium oxide (HZO) becomes more widely utilized in ferroelectric microelectronics, integration impacts of intentional and non-intentional dielectric interfaces and their effects upon the ferroelectric film wake up and circuit parameters become important to understand. In this work, the effect of the addition of a linear dielectric aluminum oxide, Al 2 O 3 , below a ferroelectric Hf 0.58 Zr 0.42 O 2 film in a capacitor structure for FeRAM applications with NbN electrodes was measured. Depolarization fields resulting from the linear dielectric is observed to induce a reduction of the remanent polarization of the ferroelectric. Addition of the aluminum oxide also impacts the wake up of the HZO with respect to the cycling voltage applied. Intricately linked to the design of a FeRAM 1C/1T cell, the metal-ferroelectric-insulator-metal (MFIM) devices are observed to significantly shift charge related to the read states based on aluminum oxide thickness and wake up cycling voltage. As a result, a 33% reduction in the separation of read states is measured, which complicates how a memory cell is designed and illustrates the importance of clean interfaces in devices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Ferroelectrics everywhere: Ferroelectricity in magnesium substituted zinc oxide thin films

We demonstrate ferroelectricity in Mg-substituted ZnO thin films with the wurtzite structure. Zn 1–x Mg x O films are grown by dual-cathode reactive magnetron sputtering on (111)-Pt // (0001)-Al 2 O 3 substrates at temperatures ranging from 26 to 200 °C for compositions spanning from x = 0 to x = 0.37. X-ray diffraction indicates a decrease in the c-lattice parameter and an increase in the a-lattice parameter with increasing Mg content, resulting in a nearly constant c/a axial ratio of 1.595 over this composition range. Transmission electron microscopy studies show abrupt interfaces between Zn 1–x Mg x O films and the Pt electrode. When prepared at pO 2 = 0.025, film surfaces are populated by abnormally oriented grains as measured by atomic force microscopy for Mg concentrations >29%. Raising pO 2 to 0.25 eliminates the misoriented grains. Optical measurements show increasing bandgap values with increasing Mg content. When prepared on a 200 °C substrate, films display ferroelectric switching with remanent polarizations exceeding 100 μC cm –2 and coercive fields below 3 MVcm –1 when the Mg content is between ~30% and ~7%. Substrate temperature can be lowered to ambient conditions, and when doing so, capacitor stacks show only minor sacrifices to crystal orientation and nearly identical remanent polarization values; however, coercive fields drop below 2 MV/cm. Using ambient temperature deposition, we demonstrate ferroelectric capacitor stacks integrated directly with polymer substrate surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of fabrication processes on BaTiO 3 capacitor properties

There is an increasing desire to utilize complex functional electronic materials such as ferroelectrics in next-generation microelectronics. As new materials are considered or introduced in this capacity, an understanding of how we can process these materials into those devices must be developed. Here, the effect of different fabrication processes on the ferroelectric and related properties of prototypical metal oxide (SrRuO 3 )/ferroelectric (BaTiO 3 )/metal oxide (SrRuO 3 ) heterostructures is explored. Two different types of etching processes are studied, namely, wet etching of the top SrRuO 3 using a NaIO 4 solution and dry etching using an Ar + -ion beam (i.e., ion milling). Polarization-electric-field hysteresis loops for capacitors produced using both methods are compared. For the ion-milling process, it is found that the Ar + beam can introduce defects into the SrRuO 3 /BaTiO 3 /SrRuO 3 devices and that the milling depth strongly influences the defect level and can induce a voltage imprint on the function. Realizing that such processing approaches may be necessary, work is performed to ameliorate the imprint of the hysteresis loops via ex situ “healing” of the process-induced defects by annealing the ferroelectric material in a barium-and-oxygen-rich environment via a chemical-vapor-deposition-style process. This work provides a pathway for the nanoscale fabrication of these candidate materials for next-generation memory and logic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the Origin of Holes During Polarization Reset in Floating Body Ferroelectric FETs Towards Improving Switching Efficiency

In this article, we performed a comprehensive combined experimental and modeling study on the polarization reset mechanisms of floating body (i.e., channel) ferroelectric FETs, an important class of device with growing interests due to added functionalities and improved reliabilities. Using fully-depleted silicon-on-insulator (FDSOI) FeFET as a classical example, we demonstrate that: 1) without hole generation mechanisms, floating body FeFETs during reset is simply a capacitor divider, with negligible ferroelectric voltage drop for switching; ii) Band-to-band-tunneling (BTBT) around gate-to-S/D overlap even with zero drain bias generates holes to facilitate the reset in FDSOI FeFET, though at a slower speed and hold the reset state; iii) With scaling, S/D inner fringe field can enable fast reset, thus offering a potential efficiency boost approach; iv) a compact FDSOI FeFET model is developed that can capture the BTBT effect and reproduce the observed behaviors; v) the reset mechanism is also validated in a NAND string composed of FDSOI FeFETs, demonstrating its relevant applications. These insights show the strategies in improving reset efficiency, i.e., enhanced BTBT and inner fringe field.

42 ENGINEERING↗
DOE OSTI2022

Investigating the dielectric constant of barium titanate in a polymer-matrix nanocomposite

Barium titanate (BTO) is a ferroelectric material used in capacitors because of its high bulk dielectric constant. However, the impact of the size of BTO on its dielectric constant is not yet fully understood and is highly contested. Here, we present an investigation into the dielectric constant of BTO nanoparticles with diameters ranging between 50 and 500 nm. BTO nanoparticles were incorporated into acrylonitrile butadiene styrene and injection molded into parallel plate capacitors, which were used to determine nanocomposite dielectric constants. The dielectric constants of BTO nanoparticles were obtained by combining experimental measurements with computational results from COMSOL simulations of ABS-matrix nanocomposites containing BTO. The dielectric constant of BTO was observed to be relatively constant at nanoparticle diameters as small as 200 nm but sharply declined at smaller nanoparticle sizes. Overall, these results will be useful in the development of improved energy storage and power conditioning systems utilizing BTO nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Antiferroelectric Ceramics for Energy–Efficient Capacitors by Theory–Guided Discovery

Antiferroelectric ceramics, via the electric-field-induced antiferroelectric (AFE)–ferroelectric (FE) phase transitions, show great promise for high-energy-density capacitors. Yet, currently, only 70–80% energy release is found during a charge–discharge cycle. Here, for PbZrO 3 -based oxides, geometric nonlinear theory of martensitic phase transitions is applied (first used to guide supercompatible shape-memory alloys) to predict the reversibility of the AFE–FE transition by using density-functional theory to assess AFE/FE interfacial lattice-mismatch strain that assures ultralow electric hysteresis and extended fatigue lifetime. A good correlation of mismatch strain with electric hysteresis, hence, with energy efficiency of AFE capacitors is observed. Here, guided by theory, high-throughput material search is conducted and AFE compositions with a near-perfect charge–discharge energy efficiency (98.2%), i.e., near-zero hysteresis are discovered. And the fatigue life of the capacitor reaches 79.5 million charge–discharge cycles, a factor of 80 enhancement over AFE ceramics with large electric hysteresis.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Characterization of the Properties of Barium–Strontium Titanate Films and Controlled Elements Based on Them in the Frequency Range of 1–60 GHz

The electrical properties of barium–strontium titanate films and tunable capacitors based on them are studied in a wide frequency range. The dielectric losses in ferroelectric films at frequencies up to 30 GHz are estimated based on the parameters of capacitors measured using various resonance techniques. Direct measurements of the properties of the films were carried out at a frequency of 60 GHz using the open-resonator technique. Based on the comparison with semiconductor analogues, the prospects of using thin-film ferroelectric elements in the millimeter-wavelength range are shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Response of the Dielectric Parameters of (110)SrTiO{sub 3} Films to the Formation of Ferroelectric Domains in Their Volume

Three-layer SrRuO{sub 3}/SrTiO{sub 3}/SrRuO{sub 3} heterostructures were grown by laser evaporation on (110)LaAlO{sub 3} substrates. Photolithography and ion etching are used to form plane-parallel film capacitors, in which a layer of strontium titanate is placed between two film electrodes of strontium ruthenate. Data on the structure and orientation of the intermediate SrTiO{sub 3} layer in the grown heterostructures were obtained. The variation of the dielectric constant and dielectric loss of the SrTiO{sub 3} intermediate layer upon varying the temperature and intensity of an external electric field was studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Constructing Polymorphic Nanodomains in BaTiO 3 Films via Epitaxial Symmetry Engineering

Ferroelectric materials owning a polymorphic nanodomain structure usually exhibit colossal susceptibilities to external mechanical, electrical, and thermal stimuli, thus holding huge potential for relevant applications. Despite the success of traditional strategies by means of complex composition design, alternative simple methods such as strain engineering have been intensively sought to achieve a polymorphic nanodomain state in lead-free, simple-composition ferroelectric oxides in recent years. Here, a nanodomain configuration with morphed structural phases is realized in an epitaxial BaTiO3 film grown on a (111)-oriented SrTiO3 substrate. Using a combination of experimental and theoretical approaches, it is revealed that a threefold rotational symmetry element enforced by the epitaxial constraint along the [111] direction of BaTiO3 introduces considerable instability among intrinsic tetragonal, orthorhombic, and rhombohedral phases. Such phase degeneracy induces ultrafine ferroelectric nanodomains (1-10 nm) with low-angle domain walls, which exhibit significantly enhanced dielectric and piezoelectric responses compared to the (001)-oriented BaTiO3 film with uniaxial ferroelectricity. Therefore, the finding highlights the important role of epitaxial symmetry in domain engineering of oxide ferroelectrics and facilitates the development of dielectric capacitors and piezoelectric devices.

36 MATERIALS SCIENCE↗