Search NASA⌕ Search

SEARCH · Search NASA

Results for “filter optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Optimal filter design subject to output sidelobe constraints - Theoretical considerations

The design of filters for detection and estimation in radar and communications systems is considered, with inequality constraints on the maximum output sidelobe levels. A constrained optimization problem in Hilbert space is formulated, incorporating the sidelobe constraints via a partial ordering of continuous functions. Generalized versions (in Hilbert space) of the Kuhn-Tucker and duality theorems allow the reduction of this problem to an unconstrained one in the dual space of regular Borel measures.

Fortmann, T. E.↗

Optimal filtering and generation of entangled photons for quantum applications in the presence of noise

Filtering is commonly used in quantum optics to reject noise photons, and also to enable interference between independent photons. However, filtering the joint spectrum of photon pairs can reduce the inherent coincidence probability or loss-independent heralding efficiency. Here we investigate filtering for multiphoton applications based on entanglement and interference (e.g., quantum teleportation). We multiplex C-band entangled photons and C-band classical communications into the same long-distance fibers, which enables scalable low-loss quantum networking but requires filtering of spontaneous Raman scattering noise from classical light. Using tunable-bandwidth filters, low-jitter detectors, and polarization filters, we distribute wavelength-degenerate time-bin entangled photons in the C band (1536.5 nm) over 25 km/25 km standard fibers (50 km) each carrying 10 Gbit/s C-band classical data signals. Narrow filtering enables milliwatt-level C-band power, which exceeds the power achieved by comparable studies by roughly an order of magnitude and could feasibly support terabit per second classical rates. We evaluate how performance depends on pump and filter bandwidths, multipair emission, filter shapes, loss, phase matching, and how quantum information is measured. We find a trade-off between reducing noise impact and increasing single-mode purity, and discuss mitigation methods toward optimal multiphoton applications. Importantly, these results apply to noise in free space and in quantum devices (sources, frequency converters, switches, detectors, etc.) and provide insight into filter-induced degradation of single-photon purity and rates even in noise-free environments.

Thomas, Jordan M. [Fermilab; Northwestern U.]↗

Using Computational Flow Imaging to Optimize Filtered Rayleigh Scattering Measurements of an Isolator Shock Train

Filtered Rayleigh scattering (FRS) is a laser diagnostic where the intensity of elastically scattered light is measured after it passes through a molecular absorption filter. The filter removes background interference that overwhelms the relatively weak scattering from the gas molecules. However, with a filter, the measured light intensity depends on many of the scattering gas properties, including pressure, density, temperature, and velocity. In this work, CFD simulations of an isolator shock train flow field are input into a physics-based model to predict the values of FRS intensity measurements in a proposed experiment. The goal is to evaluate if a simplistic FRS setup (that utilizes one camera, laser, and absorption filter) can be used to accurately quantify number density despite the fact that the scattered light intensity also depends on other gas properties. It is found that the experimental setup can be optimized such that a linear relationship describes the number density with an average prediction error of 2%. The vast majority of the flow exhibits prediction errors of less than 3%, but small regions of the flow reach up to 11% error. A sensitivity analysis shows that the prediction error increases with the central wavelength of the incident laser light and decreases with the angle between the camera and laser propagation directions. The optimal experimental parameters are chosen based on a compromise between the prediction error, spatial resolution, and the amount of unfiltered light. In the future, the proposed FRS setup will be implemented to acquire new and valuable information on an isolator shock train, a flow field that has been traditionally studied using wall static pressure measurements and path-integrated visualization techniques, such as schlieren and shadowgraphy.

Hunt, Robin L.↗

Improved tomographic reconstruction of large-scale real-world data by filter optimization

In advanced tomographic experiments, large detector sizes and large numbers of acquired datasets can make it difficult to process the data in a reasonable time. At the same time, the acquired projections are often limited in some way, for example having a low number of projections or a low signal-to-noise ratio. Direct analytical reconstruction methods are able to produce reconstructions in very little time, even for large-scale data, but the quality of these reconstructions can be insufficient for further analysis in cases with limited data. Iterative reconstruction methods typically produce more accurate reconstructions, but take significantly more time to compute, which limits their usefulness in practice. In this paper, we present the application of the SIRT-FBP method to large-scale real-world tomographic data. The SIRT-FBP method is able to accurately approximate the simultaneous iterative reconstruction technique (SIRT) method by the computationally efficient filtered backprojection (FBP) method, using precomputed experiment-specific filters. We specifically focus on the many implementation details that are important for application on large-scale real-world data, and give solutions to common problems that occur with experimental data. We show that SIRT-FBP filters can be computed in reasonable time, even for large problem sizes, and that precomputed filters can be reused for future experiments. Reconstruction results are given for three different experiments, and are compared with results of popular existing methods. The results show that the SIRT-FBP method is able to accurately approximate iterative reconstructions of experimental data. Furthermore, they show that, in practice, the SIRT-FBP method can produce more accurate reconstructions than standard direct analytical reconstructions with popular filters, without increasing the required computation time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal filtering in the presence of unmodeled time correlated driving disturbances.

In many realistic data filtering problems, the cross correlation of the state estimation error and the state forcing function is unknown due to the poor knowledge of the time history of the forcing function. In this paper, the conservative and minimal approximation to the cross correlation terms is presented. It requires only the knowledge of the estimation error covariance and the forcing function covariance, with the choice of an associated free parameter left to the user. If the estimation error covariance and/or the forcing function covariance are bounded from above but not known exactly, the cross correlation approximation using those upper bounds remains conservative. This cross correlation approximation leads to a conservative approximation to the estimation error covariance matrix differential equation between measurement times. The free parameter is determined as the analytic solution to an associated optimal control problem. The procedure is expanded to include discrete linear measurement incorporation.

Fraser, D. C.↗

Estimation of optimal Kalman filter gain from non-optimal filter residuals

This paper presents a novel method of estimating the optimal steady state Kalman filter gain of a linear discrete time-invariant system from a non-optimal Kalman filter residual sequence. The relation between the optimal residual sequence and a signal derived from the non-optimal residual sequence is described by a Moving Average (MA) model whose coefficients are expressed in terms of the state space parameters and the optimal steady state Kalman filter gain. In order to identify the MA model, a whitening filter of the derived signal, which corresponds to an AutoRegressive (AR) model of the signal, is first identified using the least-squares method. Then the inverse filter of the whitening filter, which corresponds to the MA model, is calculated. From the coefficients of the identified MA model, the optimal steady state Kalman filter gain can be obtained. Numerical example is provided to illustrate the feasibility of this approach.

Chen, Chung-Wen↗

A Comprehensive Approach towards Multi-Objective EMI Filter Design Optimization in High-Frequency SiC-Based Motor Drives

With rapid penetration of high-frequency, highdensity power electronics into the industry, controlling the system generated EMI becomes one of the major design challenges. Designing practical optimized EMI filters require simultaneous consideration of multiple aspects - including electromagnetic couplings, magnetic materials, practical component parasitics and their impacts at high-frequencies, and also the overall manufacturing costs. The multi-dimensional nature of the problem often results in overcompensated designs that hurt the system efficiency and power density. This paper focuses on a comprehensive design platform (developed in MATLAB) towards designing high-density, optimized, highly efficient EMI filters by analyzing the generated noise spectrum and evaluating a vast array of potential solutions before outputting an optimized filter solution. The proposed tool includes database-based component selection, optimal topology selection, multistage filter design, overall optimization for volume, mass, cost and total loss. The proposed filter has been thoroughly evaluated in a PSIM simulation environment emulating the hardware in CRD300DA12EXM3, a 300kW three-phase inverter from Wolfspeed with an RL load representing a motor drive application. Furthermore, a 20kHz switching frequency is chosen and impacts of the motor high-frequency characteristics on the generated EMI noise spectrum of the overall system have been analyzed.

42 ENGINEERING↗

Design of optimal correlation filters for hybrid vision systems

Research is underway at the NASA Johnson Space Center on the development of vision systems that recognize objects and estimate their position by processing their images. This is a crucial task in many space applications such as autonomous landing on Mars sites, satellite inspection and repair, and docking of space shuttle and space station. Currently available algorithms and hardware are too slow to be suitable for these tasks. Electronic digital hardware exhibits superior performance in computing and control; however, they take too much time to carry out important signal processing operations such as Fourier transformation of image data and calculation of correlation between two images. Fortunately, because of the inherent parallelism, optical devices can carry out these operations very fast, although they are not quite suitable for computation and control type operations. Hence, investigations are currently being conducted on the development of hybrid vision systems that utilize both optical techniques and digital processing jointly to carry out the object recognition tasks in real time. Algorithms for the design of optimal filters for use in hybrid vision systems were developed. Specifically, an algorithm was developed for the design of real-valued frequency plane correlation filters. Furthermore, research was also conducted on designing correlation filters optimal in the sense of providing maximum signal-to-nose ratio when noise is present in the detectors in the correlation plane. Algorithms were developed for the design of different types of optimal filters: complex filters, real-value filters, phase-only filters, ternary-valued filters, coupled filters. This report presents some of these algorithms in detail along with their derivations.

Rajan, Periasamy K.↗

Mapping considerations for optimal binary correlation filters

The optimality of correlation filters is an important issue in applications of pattern recognition. Both binary phase-only filters (BPOFs) and amplitude encoded binary phase-only filters (AE BPOFs) are considered and the results of optimizing the filters for a real world object (the Space Shuttle) are studied. It is found that while only small improvements result from optimizing a BPOF, optimization of the AE BPOF is quite important in obtaining a useful correlation function. In the case of an AE BPOF, both signal-to-noise and peak-to-sidelobe measures must be studied. Computer simulation and experimental correlation results are presented.

Downie, John D.↗

Laboratory comparison of continuous vs. binary phase-mostly filters

Recent developments in spatial light modulators have led to devices which are capable of continuous phase modulation, even if only over a limited range. One of these devices, the deformable mirror device is used, to compare the relative merits of binary and partially-continuous phase filters in a specific problem of pattern recognition by optical correlation. Each filter was physically limited to only about a radiation of modulation. Researchers have predicted that for low input noise levels, continuous phase-only filters should have a higher absolute correlator peak output than the corresponding binary filters, as well as having a larger SNR. When continuous and binary filters were implemented on the DMD and they exhibited the same performance; an ad hoc filter optimization procedure was developed for use in the laboratory. The optimized continuous filter gave higher correlation peaks than did an independently optimized binary filter. Background behavior in the correlation plane was similar for the two filters, and thus the SNR showed the same improvement for the continuous filter. A phasor diagram analysis and computer simulation have explained part of the optimization procedure's success.

Monroe, Stanley E., Jr.↗

Optimal Correlation Filters for Images with Signal-Dependent Noise

We address the design of optimal correlation filters for pattern detection and recognition in the presence of signal-dependent image noise sources. The particular examples considered are film-grain noise and speckle. Two basic approaches are investigated: (1) deriving the optimal matched filters for the signal-dependent noise models and comparing their performances with those derived for traditional signal-independent noise models and (2) first nonlinearly transforming the signal-dependent noise to signal-independent noise followed by the use of a classical filter matched to the transformed signal. We present both theoretical and computer simulation results that demonstrate the generally superior performance of the second approach in terms of the correlation peak signal-to-noise ratio.

Downie, John D.↗

Optimal realizable filters and the minimum Euclidean distance principle

Minimizing a Euclidean distance in the complex plane optimizes a wide class of correlation metrics for filters implemented on realistic devices. The algorithm searches over no more than two real scalars (gain and phase). It unifies a variety of previous solutions for special cases (e.g., a maximum signal-to-noise ratio with colored noise and a real filter and a maximum correlation intensity with no noise and a coupled filter). It extends optimal partial information filter theory to arbitrary spatial light modulators (fully complex, coupled, discrete, finite contrast ratio, and so forth), additive input noise (white or colored), spatially nonuniform filter modulators, and additive correlation detection noise (including signal dependent noise).

Juday, Richard D.↗