Search NASA⌕ Search

SEARCH · Search NASA

Results for “first principles density functional theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Phase evolution in the ferroelectric relaxor Ba ( Ti 1 - x , Zr x ) O 3 from atomistic simulations

We develop and/or use a combination of first-principles density functional theory and first-principles-based effective Hamiltonian approaches to investigate phase evolution in Ba(Ti 1–x ,Zr x )O 3 ferroelectric relaxor. Our simulations reveal two competing effects, which are associated with substitution of Ti with Zr and primarily responsible for the unusual phase evolution and the properties of this family of solid solutions. They are the negative chemical pressure that Zr exerts on the BaTiO 3 matrix and the ferroelectric “inactivity” of Zr itself. While the former has a stabilizing effect on ferroelectricity, the latter disrupts the ferroelectric cooperation. These competing effects are responsible for the so-called pinched phase transition, where the three phases of parent BaTiO 3 merge together, and the loss of ferroelectricity at the onset of relaxor behavior. Here, the origin of the controversial diffuse phase transition is attributed to the coexistence of the three ferroelectric phases. In the region of the diffuse phase transition, we detect polar nanoregions, which often exhibit unusual nanopillar geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vapor-liquid Coexistence Curves for Methanol and Methane using Dispersion-Corrected Density Functional Theory

First principles Monte Carlo simulations in the Gibbs and isobaric-isothermal ensembles were performed to map the vapor-liquid coexistence curves (VLCC) of methanol and methane described by Kohn-Sham density functional theory using the Becke-Lee-Yang-Parr (BLYP) exchange and correlation functionals with the Grimme correction term for dispersive (D2) interactions. The simulations indicate that the BLYP-D2 description underpredicts the saturated vapor densities and overpredicts the saturated liquid densities and critical and boiling temperatures for both compounds. Although the deviations are quite large, these results present a significant improvement over the BLYP functional without the correction term which misses the experimental results by a larger extent in the opposite direction. With the D2 correction, an increase in the basis set does not lead to significant changes in the VLCC properties. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

03 NATURAL GAS↗

Density functional theory based simulations of silicon nanowire field effect transistors

First-principles density functional theory (DFT) based, atomistic, self-consistent device simulations are performed for realistically sized Si nanowire field effect transistors (NW FETs) having tens of thousands of atoms. Through mode space transformation, DFT Hamiltonian and overlap matrices are reduced in size from a few thousands to around one hundred. Ultra-efficient quantum-mechanical transport calculations in the non-equilibrium Green's function formalism in a non-orthogonal basis are therefore made possible. The n-type and p-type Si NW FETs are simulated and found to exhibit similar device performance in the nanoscale regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monte Carlo Simulation of Electron Thermalization in Scintillator Materials: Implications for Scintillator Nonproportionality

The lack of reliable quantitative estimates of the length and time scales associated with hot electron thermalization after a gamma-ray induced energy cascade obscures the interplay of various microscopic processes controlling scintillator performance and hampers the search for improved detector materials. We apply a detailed microscopic kinetic Monte Carlo model of the creation and subsequent thermalization of hot electrons produced by gamma irradiation of six important scintillating crystals to determine the spatial extent of the cloud of excitations produced by gamma rays and the time required for the cloud to thermalize with the host lattice. The main ingredients of the model are ensembles of microscopic track structures produced upon gamma excitation (including the energy distribution of the excited carriers), numerical estimates of electron-phonon scattering rates, and a calculated particle dispersion to relate the speed and energy of excited carriers. All these ingredients are based on first-principles density functional theory calculations of the electronic and phonon band structures of the materials. Details of the Monte Carlo model are presented along with results for thermalization time and distance distributions. These results are discussed in light of previous work. It is found that among the studied materials, calculated thermalization distances are positively correlated with measured nonproportionality. In the important class of halide scintillators, the particle dispersion is found to be more influential than the largest phonon energy in determining the thermalization distance.

Phonons, radiation detection, scintillators, thema↗

Calculating Hugoniots for molecular crystals from first principles.

Density Functional Theory (DFT) has over the last few years emerged as an indispensable tool for understanding the behavior of matter under extreme conditions. DFT based molecular dynamics simulations (MD) have for example confirmed experimental findings for shocked deuterium, enabled the first experimental evidence for a triple point in carbon above 850 GPa, and amended experimental data for constructing a global equation of state (EOS) for water, carrying implications for planetary physics. The ability to perform high-fidelity calculations is even more important for cases where experiments are impossible to perform, dangerous, and/or prohibitively expensive. For solid explosives, and other molecular crystals, similar success has been severely hampered by an inability of describing the materials at equilibrium. The binding mechanism of molecular crystals (van der Waals forces) is not well described within traditional DFT. Among widely used exchange-correlation functionals, neither LDA nor PBE balances the strong intra-molecular chemical bonding and the weak inter-molecular attraction, resulting in incorrect equilibrium density, negatively affecting the construction of EOS for undetonated high explosives. We are exploring a way of bypassing this problem by using the new Armiento-Mattsson 2005 (AM05) exchange-correlation functional. The AM05 functional is highly accurate for a wide range of solids, in particular in compression. In addition, AM05 does not include any van der Waals attraction, which can be advantageous compared to other functionals: Correcting for a fictitious van der Waals like attraction with unknown origin can be harder than correcting for a complete absence of all types of van der Waals attraction. We will show examples from other materials systems where van der Waals attraction plays a key role, where this scheme has worked well, and discuss preliminary results for molecular crystals and explosives.

36 MATERIALS SCIENCE↗

Influence of carbon on the kinetics of He migration and clustering in {alpha}-Fe from first principles

Density functional theory (DFT) calculations have been performed to study the interaction of carbon with He-vacancy complexes in {alpha}-Fe. Using the DFT predictions, a rate theory model that accounts for the evolution of carbon, helium, and defects created during irradiation has been developed to explore the influence of carbon on the kinetics of He diffusion and clustering after implantation in {alpha}-Fe. This DFT-based rate theory model predicts that carbon not only influences vacancy (V) migration but also He desorption, enhancing He mobility in particular for low V/C ratios. The reason for this behavior is mainly the formation of VC and VC{sub 2} complexes, which significantly reduces the mobility of vacancies with respect to pure Fe, inhibiting the formation of higher order clusters, i.e., He{sub n}V{sub m}, and increasing thus the number of He at substitutional positions at room temperature. Assuming reasonable values of carbon concentration, we successfully reproduce and interpret existing desorption experimental results, where all the energetic parameters for the relevant reactions were obtained from first-principles calculations. In addition, our study provides a detailed explanation of the various He migration mechanisms that prevail under the considered experimental conditions.

36 MATERIALS SCIENCE↗

Rare‐Earth Dopant Effects on the Structural, Energetic, and Magnetic Properties of Alumina from First Principles

Density functional theory was used to study the effect of rare‐earth dopants on the structure, phase stability, and magnetic properties of α‐ and θ‐Al 2 O 3 . Lanthanide series rare‐earth dopants (Pr, Nd, Gd, Er, and Yb) were considered at a doping concentration of 0.83 at.%. Incorporation of rare‐earth dopants was found to increase the lattice parameters and exaggerate the local structural distortion around the dopant. The extent of local lattice distortion was correlated with the dopant ionic radii. The phase stability of rare‐earth‐doped Al 2 O 3 was assessed by comparing cohesive and defect formation energies for doped and undoped α‐ and θ‐Al 2 O 3 . Rare‐earth dopants increased the relative stability of the metastable θ‐Al 2 O 3 , although doped α‐Al 2 O 3 remained more stable. The total magnetic moment of the doped Al 2 O 3 was shown to correlate with the number of unpaired electrons. The magnetic moment was also found to be strongly localized on the rare‐earth dopant for Er, Gd, Nd, and Pr‐doped Al 2 O 3 . In contrast, the Yb dopant induced a delocalized magnetic moment on ~80% of the oxygen atoms. These results further the understanding of dopant incorporation mechanisms, as well as the doping effect on phase stability and magnetic properties that may be applied to advanced field‐assisted material synthesis and processing for enhanced properties.

Limmer, Krista R.↗

Electron-capture decay rate of {sup 7}Be-C{sub 60} by first-principles calculations based on density functional theory

Carrying out a first-principles calculation assuming linear relationship between the electron density at Be nucleus and the electron-capture (EC) decay rate, we explained why {sup 7}Be-C{sub 60} shows higher EC decay rate than {sup 7}Be crystal, which was originally found experimentally by Ohtsuki et al. [Phys. Rev. Lett. 93, 112501 (2004)]. From the results of the calculation, we found that there are inequivalent four stable (i.e., lower energy) Be sites inside C{sub 60} and that center of C{sub 60} (C{sub C60}) is the most favorable site. For C{sub C60}, the electron density at the Be nucleus is the highest. It is also much higher than that at the Be nucleus in a Be crystal. Also, we estimated the expected electron density at the Be nucleus at room temperature by taking statistical average of the electron densities at the four Be nucleus sites using the Boltzmann distribution. The results of the calculation show fairly good agreement with the experimental results. In this paper, we focus on the detail of calculation, which was not fully demonstrated in the paper by Ohtsuki.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. The formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamically driven process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanocrystalline tungsten carbide: As incompressible as diamond

We investigate the compressibility of nanocrystalline tungsten carbide (nano-WC) using synchrotron x-ray diffraction. Nano-WC displays a bulk modulus (452 GPa) comparable to that of diamond; it is 10%-15% larger than previously reported values for bulk WC. This finding is consistent with a generalized model of nanocrystal with a compressed surface layer. The linear bulk moduli of nano-WC along a- and c-axes were determined to be 407 and 546 GPa, respectively. First-principles density functional theory (DFT) calculations confirm the experimental observations of an anisotropic linear compressibility and a lower bulk modulus for microsized WC.

43 PARTICLE ACCELERATORS↗

Site preference and magnetic properties of Ga/In-substituted strontium hexaferrite: An ab initio study

The first-principles density functional theory has been used to study Ga/In-substituted strontium hexaferrite (SrFe12O19). Based on the calculation of the substitution energy of Ga and In in SrFe12O19 and the formation probability analysis, we conclude that in SrFe12−xGaxO19 the substituted Ga atoms prefer to occupy the 12k, 2a, and 4f1 sites, while In atoms in SrFe12−xInxO19 occupy the 12k, 4f2, and 4f1 sites. We used the site occupation probabilities to calculate the magnetic properties of the substituted SrFe12O19. It was found that as the fraction of Ga atoms in SrFe12−xGaxO19 increases, the saturation magnetization (Ms) as well as magnetic anisotropy energy (MAE) decrease, while the anisotropy field (Ha) increases. In the case of SrFe12−xInxO19, Ms, MAE, and Ha decrease with an increase of the concentration of In atoms.

Dixit, Vivek (ORCID:000000029178217X)↗

Compositional effects on the electronic structure of ZnSe 1-x S x ternary quantum dots

Here, we report first-principles density functional theory calculations of the electronic structure of ZnSe 1-x S x ternary quantum dots (TQDs) and the impact of composition and compositional distribution on the electron density distribution, electronic density of states, and band gap. We find that the band gaps for ZnSe/ZnS core/shell TQDs are nearly independent of the number of S atoms in the shell, whereas the presence of S in the core of alloyed TQDs modifies the electronic energy levels significantly. Finally, our results imply that distribution of S atoms can be used to achieve quantum confinement in different regions of the TQDs.

charge transport↗

Tailoring graphene magnetism by zigzag triangular holes: A first-principles thermodynamics study

In this study, we discuss the thermodynamic stability and magnetic property of zigzag triangular holes (ZTHs) in graphene based on the results of first-principles density functional theory calculations. We find that ZTHs with hydrogen-passivated edges in mixed sp 2 /sp 3 configurations (z 211 ) could be readily available at experimental thermodynamic conditions, but ZTHs with 100% sp 2 hydrogen-passivation (z 1 ) could be limitedly available at high temperature and ultra-high vacuum conditions. Graphene magnetization near the ZTHs strongly depends on the type and the size of the triangles. While metallic z 1 ZTHs exhibit characteristic edge magnetism due to the same-sublattice engineering, semiconducting z 211 ZTHs do show characteristic corner magnetism when the size is small < 2 nm. Our findings could be useful for experimentally tailoring metal-free carbon magnetism by simply fabricating triangular holes in graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct observation of oxygen-vacancy-enhanced polarization in a SrTiO{sub 3}-buffered ferroelectric BaTiO{sub 3} film on GaAs

The integration of functional oxide thin-films on compound semiconductors can lead to a class of reconfigurable spin-based optoelectronic devices if defect-free, fully reversible active layers are stabilized. However, previous first-principles calculations predicted that SrTiO{sub 3} thin films grown on Si exhibit pinned ferroelectric behavior that is not switchable, due to the presence of interfacial vacancies. Meanwhile, piezoresponse force microscopy measurements have demonstrated ferroelectricity in BaTiO{sub 3} grown on semiconductor substrates. The presence of interfacial oxygen vacancies in such complex-oxide/semiconductor systems remains unexplored, and their effect on ferroelectricity is controversial. Here, we use a combination of aberration-corrected scanning transmission electron microscopy and first-principles density functional theory modeling to examine the role of interfacial oxygen vacancies on the ferroelectric polarization of a BaTiO{sub 3} thin film grown on GaAs. We demonstrate that interfacial oxygen vacancies enhance the polar discontinuity (and thus the single domain, out-of-plane polarization pinning in BaTiO{sub 3}), and propose that the presence of surface charge screening allows the formation of switchable domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanospheres of a New Intermetalic FeSn5 Phase: Synthesis Magnetic Properties and Anode Performance in Li-ion Batteries

We synthesized monodisperse nanospheres of an intermetallic FeSn{sub 5} phase via a nanocrystal-conversion protocol using preformed Sn nanospheres as templates. This tetragonal phase in P4/mcc space group, along with the defect structure Fe{sub 0.74}Sn{sub 5} of our nanospheres, has been resolved by synchrotron X-ray diffraction and Rietveld refinement. Importantly, FeSn{sub 5}, which is not yet established in the Fe-Sn phase diagram, exhibits a quasi-one dimensional crystal structure along the c-axis, thus leading to interesting anisotropic thermal expansion and magnetic properties. Magnetization measurements indicate that nanospheres are superparamagnetic above the blocking temperature T{sub B} = 300 K, which is associated with the higher magnetocrystalline anisotropy constant K = 3.33 kJ m{sup -3}. The combination of the magnetization measurements and first-principles density functional theory calculations reveals the canted antiferromagnetic nature with significant spin fluctuation in lattice a-b plane. The low Fe concentration also leads Fe{sub 0.74}Sn{sub 5} to enhanced capacity as an anode in Li ion batteries.

25 ENERGY STORAGE↗

Epitaxy of polar semiconductor Co{sub 3}O{sub 4} (110): Growth, structure, and characterization

The (110) plane of Co{sub 3}O{sub 4} spinel exhibits significantly higher rates of carbon monoxide conversion due to the presence of active Co{sup 3+} species at the surface. However, experimental studies of Co{sub 3}O{sub 4} (110) surfaces and interfaces have been limited by the difficulties in growing high-quality films. We report thin (10–250 Å) Co{sub 3}O{sub 4} films grown by molecular beam epitaxy in the polar (110) direction on MgAl{sub 2}O{sub 4} substrates. Reflection high-energy electron diffraction, atomic force microscopy, x-ray diffraction, and transmission electron microscopy measurements attest to the high quality of the as-grown films. Furthermore, we investigate the electronic structure of this material by core level and valence band x-ray photoelectron spectroscopy, and first-principles density functional theory calculations. Ellipsometry reveals a direct band gap of 0.75 eV and other interband transitions at higher energies. A valence band offset of 3.2 eV is measured for the Co{sub 3}O{sub 4}/MgAl{sub 2}O{sub 4} heterostructure. Magnetic measurements show the signature of antiferromagnetic ordering at 49 K. FTIR ellipsometry finds three infrared-active phonons between 300 and 700 cm{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adsorption and diffusion of Ru adatoms on Ru(0001)-supported graphene: Large-scale first-principles calculations

Large-scale first-principles density functional theory calculations are performed to investigate the adsorption and diffusion of Ru adatoms on monolayer graphene (G) supported on Ru(0001). The G sheet exhibits a periodic moiré-cell superstructure due to lattice mismatch. Within a moiré cell, there are three distinct regions: fcc, hcp, and mound, in which the C{sub 6}-ring center is above a fcc site, a hcp site, and a surface Ru atom of Ru(0001), respectively. The adsorption energy of a Ru adatom is evaluated at specific sites in these distinct regions. We find the strongest binding at an adsorption site above a C atom in the fcc region, next strongest in the hcp region, then the fcc-hcp boundary (ridge) between these regions, and the weakest binding in the mound region. Behavior is similar to that observed from small-unit-cell calculations of Habenicht et al. [Top. Catal. 57, 69 (2014)], which differ from previous large-scale calculations. We determine the minimum-energy path for local diffusion near the center of the fcc region and obtain a local diffusion barrier of ∼0.48 eV. We also estimate a significantly lower local diffusion barrier in the ridge region. These barriers and information on the adsorption energy variation facilitate development of a realistic model for the global potential energy surface for Ru adatoms. This in turn enables simulation studies elucidating diffusion-mediated directed-assembly of Ru nanoclusters during deposition of Ru on G/Ru(0001)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗