Search NASA⌕ Search

SEARCH · Search NASA

Results for “flexible device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

[100] or [110] aligned, semiconductor-based, large-area, flexible, electronic devices

Novel articles and methods to fabricate the same resulting in flexible, large-area, [100] or [110] textured, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

{100}<100> or 45.degree.-rotated {100}<100>, semiconductor-based, large-area, flexible, electronic devices

Novel articles and methods to fabricate the same resulting in flexible, {100}<100> or 45.degree.-rotated {100}<100> oriented, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

42 ENGINEERING↗

Direct synthesis of biaxially textured nickel disilicide thin films by magnetron sputter deposition on low-cost metal tapes for flexible silicon devices

Nickel silicides are widely used as contact materials for electronic devices based on silicon (Si). However, they have been predominantly fabricated by annealing separate Ni and Si phases which leads to phase and structural complexity. In this letter, direct epitaxial growth of a single-phase nickel disilicide (NiSi 2 ) thin film by sputter deposition of NiSi 2 is achieved on low-cost and flexible Hastelloy tapes which offers a promising route to fabricate low-cost, flexible electronic devices. Biaxially textured titanium nitride (TiN) is applied as the seeding layer and the diffusion barrier under NiSi 2 . An epitaxial relationship of (001)$\langle$100$\rangle$NiSi 2 ∥ (001)$\langle$110$\rangle$TiN is observed with an extra-large lattice mismatch (~10.3%) between NiSi 2 and TiN. Both the bonding similarity and the passivation effect by hydrogen promote the epitaxial growth of NiSi 2 on TiN. The flat and smooth NiSi 2 thin film consists of grains with a size of 50–100 nm. An epitaxially grown Si film on NiSi 2 further demonstrates the potential of manufacturing high-performance Si flexible electronics with NiSi 2 /TiN/Hastelloy as the direct contact through this approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semiconductor-based, large-area, flexible, electronic devices

Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

42 ENGINEERING↗

Sono-Assisted Surface Energy Driven Assembly of 2D Materials on Flexible Polymer Substrates: A Green Assembly Method Using Water

The challenges in achieving a green and scalable integration of two-dimensional (2D) materials with flexible polymer substrates present a major barrier for the application of 2D materials, such as graphene, MoS2, and h-BN for flexible devices. Here, we create a sono-assisted surface energy driven assembly (SASEDA) method that can achieve foot-scale to micrometer-scale assembly of 2D materials, form a conductive network in as short as 10 s, and build hierarchical and hybrid flexible devices such as sensors, resistors, and capacitors by using water as the dispersion solvent. SASEDA highlights two counterintuitive innovations. First, we use an 'unfavorable' solvent (i.e., water) for both 2D materials (e.g., graphene, MoS2, and h-BN) and polymer substrates (e.g., polydimethylsiloxane) to drive the assembly process. Second, we use a weak sono-field (0.3 W/cm2) generated by a regular sonication bath cleaner to enhance the assembly efficiency and reorganize and unify the assembly network. This method and its principle pave the way toward affordable large-scale 2D material-based flexible devices.

2D material↗

Semiconductor-based, large-area, flexible, electronic devices on {110}<100> oriented substrates

Novel articles and methods to fabricate the same resulting in flexible, oriented, semiconductor-based, electronic devices on {110}<100> textured substrates are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

36 MATERIALS SCIENCE↗

Collaborative Research and Development by EpiSolar and NREL of Processes and Materials for Flexible CdS/CdTe Superstrate Devices: Cooperative Research and Development Final Report, CRADA Number CRD-14-550

The objective of this work is to collaborate with EpiSolar to develop and test processes that are consistent with the goals and milestones of an NREL FPace1 (Foundational Program to Advance Cell Efficiency) project entitled 'High-Temperature, Roll-to-Roll (RTR) CdTe Superstrate Devices Using Flexible Glass.' The primary milestone for this CRADA relates to demonstration of a 15% efficient laboratory device.

14 SOLAR ENERGY↗

Recent Progress on Laser Manufacturing of Microsize Energy Devices on Flexible Substrates

We report on the impact of laser processing on material and device performance characteristics for integrated energy applications. A femtosecond laser was used for development of flexible and transparent supercapacitors, while a nanosecond laser was successfully exploited for high-performance Al–air battery development. A laser direct-write process enabled integration of a three-dimensional-structured micro-supercapacitor on flexible polymer substrate, exhibiting peak specific capacitance of 42.6 mF/cm 2 at current density of 0.1 mA/cm 2 . Femtosecond laser processing was also exploited for development of a novel transparent supercapacitor on silk substrate. The MnO 2 -coated transparent supercapacitors exhibited high transmittance exceeding 59%. Laser processing in combination with printing technique was used for development of a novel Al–air battery. The nanosecond laser process was effective in sintering the anode printed using Al nanoparticle ink. The efficiency of the laser sintering process was reflected in good battery discharge performance.

25 ENERGY STORAGE↗

Thickness modulated MoS{sub 2} grown by chemical vapor deposition for transparent and flexible electronic devices

Two-dimensional (2D) materials have been a great interest as high-performance transparent and flexible electronics due to their high crystallinity in atomic thickness and their potential for variety applications in electronics and optoelectronics. The present study explored the wafer scale production of MoS{sub 2} nanosheets with layer thickness modulation from single to multi-layer by using two-step method of metal deposition and CVD process. The formation of high-quality and layer thickness-modulated MoS{sub 2} film was confirmed by Raman spectroscopy, AFM, HRTEM, and photoluminescence analysis. The layer thickness was identified by employing a simple method of optical contrast value. The image contrast in green (G) channel shows the best fit as contrast increases with layer thickness, which can be utilized in identifying the layer thickness of MoS{sub 2}. The presence of critical thickness of Mo for complete sulphurization, which is due to the diffusion limit of MoS{sub 2} transformation, changes the linearity of structural, electrical, and optical properties of MoS{sub 2}. High optical transparency of >90%, electrical mobility of ∼12.24 cm{sup 2} V{sup −1} s{sup −1}, and I{sub on/off} of ∼10{sup 6} characterized within the critical thickness make the MoS{sub 2} film suitable for transparent and flexible electronics as compared to conventional amorphous silicon (a-Si) or organic films. The layer thickness modulated large scale MoS{sub 2} growth method in conjunction with the layer thickness identification by the nondestructive optical contrast will definitely trigger development of scalable 2D MoS{sub 2} films for transparent and flexible electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Assessing Customer Experience and Business Models around Price-to-Device Communication and Smart Control Pathways in CalFlexHub

California is facing three major challenges in electrical grid operation: renewable overgeneration, steep evening ramping, and growing peak demand. The state has identified dynamic retail price response as a key strategy evidenced by CPUC’s Dynamic Rates proceeding and CEC’s Load Management Standards. Furthermore, the CEC launched a $16M “California Load Flexibility Research and Deployment Hub (CalFlexHub)” administered by Berkeley Lab to accelerate price-response flexible load technologies in buildings and EV charging. There are more than 16 laboratory and field demonstration projects in CalFlexHub, each demonstrating innovative automated price-response technologies. CalFlexHub tests various pathways through which hourly price signals and triggered control commands are communicated to load-flexible devices such as smart thermostats, heat pumps, water heaters, and EVs. We identified seven unique communication and control pathways, which involve combinations of third-party cloud, device OEM’s cloud, building central gateway, and local controller in between the price server and the load-flexible devices. It is important for utilities and policy makers to understand the long-term implications of each pathway in designing future programs and creating related policies and mandates for market transformation. We propose an evaluation framework including the following aspects: ● Functionality: connectivity and uptime, resilience, and optimization; ● Customer experience: simplicity in setup, troubleshooting support, continuity, customer choice, first cost, and ongoing cost; ● Business model and scalability: advance interoperability, holistic solution, bridge unique gap, customer base, and value streams and pricing structures. In this paper, we identify emerging business models associated with each communication pathway and discuss their positive features and challenges from the above aspects.

Liu, Jingjing↗

Simultaneous type-I and type-II phase matching for second-order nonlinearity in integrated lithium niobate waveguide

Second-order optical nonlinearity is widely used for both classical and quantum photonic applications. Due to material dispersion and phase matching requirements, the polarization of optical fields is pre-defined during the fabrication. Only one type of phase matching condition is normally satisfied, and this limits the device flexibility. Here, we demonstrate that phase matching for both type-I and type-II second-order optical nonlinearity can be realized simultaneously in the same waveguide fabricated from thin-film lithium niobate. This is achieved by engineering the geometry dispersion to compensate for the material dispersion and birefringence. The simultaneous realization of both phase matching conditions is verified by the polarization dependence of second-harmonic generation. Correlated photons are also generated through parametric down conversion from the same device. This work provides a novel approach to realize versatile photonic functions with flexible devices.

Briggs, Ian↗

A Flexible, Redox-Active, Aqueous Electrolyte-Based Asymmetric Supercapacitor with High Energy Density Based on Keratin-Derived Renewable Carbon

This work exploits the advantage of asymmetric configuration over symmetric supercapacitor in designing high energy density flexible devices from two active electrode materials–keratin-based renewable-resource hierarchically porous carbon and hydrous ruthenium oxide (RuO 2 ). Here, the asymmetric device exhibits significantly high capacitance. Conventional estimation of energy storage parameters, however, cannot be applied for devices with a Faradaic energy storage contribution via redox charge transfer mechanism. Therefore, this work applies a precise measurement of pseudocapacitance contribution at various scan rates to correct the device data that reveals effective capacitance of 120 F g –1 with the energy density of 37 W h kg –1 at 776 W kg –1 . It also retains excellent rate capability, >74% at high current density 25 A g –1 . The charge storage activity and device stability can be further enhanced by introducing redox-active electrolytes that improve specific capacitance, but the rate capabilities deteriorate at high current densities. Further, the principle of asymmetric electrode design is applied to fabricate a bending-tolerant, flexible device by depositing active electrode material on wire-shaped current collector followed by coupling those separated with polyvinyl alcohol gel containing redox electrolyte; it yields 36.8 mF cm –1 specific capacitance at a 0.2 mA cm –1 current density.

36 MATERIALS SCIENCE↗

Rigid stiffener-reinforced flexible neural probes, and methods of fabrication using wicking channel-distributed adhesives and tissue insertion and extraction

A stiffener-reinforced microelectrode array probe and fabrication method using wicking channel-distributed adhesives which temporarily adheres a flexible device onto a rigid stiffener for insertion and extraction. Assembly is by dispensing a liquid adhesive into a narrow open groove wicking channel formed on the stiffener so that the adhesive is wicked along and tills the channel by capillary action, and adhering the adhesive-filled bonding side of the elongated section of the rigid substrate to a flexible device.

Shah, Kedar G.↗

Rigid stiffener-reinforced flexible neural probes, and methods of fabrication using wicking channel-distributed adhesives and tissue insertion and extraction

A stiffener-reinforced microelectrode array probe and fabrication method using wicking channel-distributed adhesives which temporarily adheres a flexible device onto a rigid stiffener for insertion and extraction. Assembly is by dispensing a liquid adhesive into a narrow open groove wicking channel formed on the stiffener so that the adhesive is wicked along and fills the channel by capillary action, and adhering the adhesive-filled bonding side of the elongated section of the rigid substrate to a flexible device.

Shah, Kedar G.↗

Flexible thermal device

Fabrication of expansion joint, vibration isolator device with sufficient cross sectional area for high thermal conductivity is discussed. Device consists of multiple layers of metal foil which may be designed to meet specific applications. Thermodynamic properties of the device and illustration of construction are provided.

Wallace, S. D.↗