SEARCH · Search NASA
Results for “flow solver”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An effective preconditioning strategy for volume penalized incompressible/low Mach multiphase flow solvers
Not Available
A multipurpose lifting-line flow solver for arbitrary wind energy concepts
Abstract. In this work, we extend the AeroDyn module of OpenFAST to support arbitrary collections of wings, rotors, and towers. The new standalone AeroDyn driver supports arbitrary motions of the lifting surfaces and complex turbulent inflows. Aerodynamics and inflow are assembled into one module that can be readily coupled with an elastic solver. We describe the features and updates necessary for the implementation of the new AeroDyn driver. We present different case studies of the driver to illustrate its application to concepts such as multirotors, kites, or vertical-axis wind turbines. We perform verification and validation of some of the new features using the following test cases: elliptical wings, horizontal-axis wind turbines, and 2D and 3D vertical-axis wind turbines. The wind turbine simulations are compared to existing tools and field measurements. We use this opportunity to describe some limitations of current models and to highlight areas that we think should be the focus of future research in wind turbine aerodynamics.
Development of a RANS and LES/RANS Flow Solver for High-Speed Engine Flowpath Simulations.
Abstract not provided.
The effect of entrance flow development on vortex formation and wall shear stress in a curved artery model
In this work, we numerically investigate the effect of entrance condition on the spatial and temporal evolution of multiple three-dimensional vortex pairs and the wall shear stress distribution in a curved artery model. We perform this study using a Newtonian blood-analog fluid subjected to a pulsatile flow with two inflow conditions. The first flow condition is fully developed while the second condition is undeveloped (i.e., uniform). We discuss the connection along the axial direction between regions of organized vorticity observed at various cross sections of the model and compare results between the different entrance conditions. We model a human artery with a simple, rigid 180° curved pipe with a circular cross section and constant curvature, neglecting the effects of taper, torsion, and elasticity. Numerical results are computed from a discontinuous high-order spectral element flow solver. The flow rate used in this study is physiological. We observe differences in secondary flow patterns, especially during the deceleration phase of the physiological waveform where multiple vortical structures of both Dean-type and Lyne-type coexist. The results indicate that decreased axial velocities under an undeveloped condition produce smaller secondary flows that ultimately inhibit growth of any interior flow vortices. We highlight the effect of the entrance condition on the formation of these structures and subsequent appearance of abnormal inner wall shear stresses, which suggest there may be a lower prevalence of cardiovascular disease in curved arteries where the flow is rather undeveloped—a potentially physiologically significant result to help understand the influence of blood flow development on disease.
A Transport Equation Approach to Modeling the Influence of Surface Roughness on Boundary Layer Transition
A computational investigation has been performed to better understand the impact of surface roughness on the flow over a contaminated surface. This report highlights the implementation and development of the roughness amplication model in the flow solver OVER FLOW-2. The model, originally proposed by Dassler, Kozulovic, and Fiala, introduces an additional scalar field roughness amplification quantity. This value is explicitly set at rough wall boundaries using surface roughness parameters and local flow quantities. The additional transport equation allows non-local effects of surface roughness to be accounted for downstream of rough sections. This roughness amplification variable is coupled with the Langtry-Menter model and used to modify the criteria for transition. Results from at plate test cases show good agreement with experimental transition behavior on the flow over varyings and grain roughness heights. Additional validation studies were performed on a NACA 0012 airfoil with leading edge roughness. The computationally predicted boundary layer development demonstrates good agreement with experimental results. New tests using varying roughness configurations have been carried out at the Texas A&M Oran W. Nicks Low Speed Wind Tunnel to provide further calibration of the roughness amplification method. An overview and preliminary results are provided of this concurrent experimental investigation.
Assessment and Improvement of the SST-Gamma Transition Model in Nalu-Wind
We conduct laminar–turbulent boundary-layer transition simulations using a local correlation-based transition model for two-dimensional incompressible flow and present enhancements to improve the accuracy of transition predictions. Menter’s Galilean-invariant 𝛾 transition model is implemented in the incompressible, unstructured-grid flow solver Nalu-Wind and is validated against experimental data and results from NASA’s flow solvers. The test cases of the AIAA Transition Prediction and Modeling Workshop are investigated, namely, the T3A/T3B flat plates and the NLF(1)-0416 and S809 airfoils. Based on the results, best practices for transition simulations, particularly for an unstructured-grid flow solver, are identified. Additional airfoil simulations are conducted for two wind turbine airfoils, S822 at Reynolds numbers of 𝑂(10 5 ) and DU00-W-212 at Reynolds numbers of 𝑂(10 7 ), to assess the model at low and high Reynolds numbers. Furthermore, through this work, we propose several approaches to enhance transition simulations, including 1) enforcing positivity of the implicit operator for the source terms of the transition model, 2) employing a constant turbulence intensity in stationary external flow simulations, and 3) recommending meshing for unstructured-grid flow solvers. Finally, we provide detailed documentation of the validation and data for the canonical cases to the transition modeling community.
Toward Simulating Turbulent Wall-Bounded Flows at High Reynolds Numbers on Exascale Platforms
Given that wall resolved LES (WRLES) of high Reynolds number flows will continue to be intractable on even exascale computing platforms, there is considerable effort to make hybrid RANS/LES (HRLES) methods the tool of choice for predictive simulations of high-Re separated flows. The fidelity of HRLES depends on the ability of the subgrid model to account for the effects of the filtered scales on the resolved scales, and on the numerical schemes that are used to evolve the Navier-Stokes equations. While higher-order numerical schemes, with low dissipation/dispersion errors (and higher arithmetic intensity), are commonly used for canonical flow simulations (on simpler geometries), the bulk of the high-Re flow simulations on complex geometry still employ nominally second-order accurate schemes in structured/unstructured flow solvers. Hence, there is a need for better sub-grid models that can improve the predictive capability of both the higher-order flow solvers and existing second-order accurate flow solvers, for simulating turbulent separated flows. This talk is about ongoing efforts to develop HRLES subgrid models from DNS/WRLES simulations of canonical flows over curved and sharply discontinuous surfaces and their ability to predict high-Re flows on current petascale platforms.
Scalable Risk Assessment of Rare Events in Power Systems With Uncertain Wind Generation and Loads
Risk assessment of rare events has become increasingly important in power system planning and operation with the increasing integration of renewable energy and the presence of system uncertainties. However, quantifying the risk posed by rare events via the traditional method, i.e., Monte Carlo sampling (MCS), incurs substantial computational expense stemming from the vast ensemble of power flow simulations. To accelerate the assessment, this paper proposes a Deep Neural Network (DNN)-kernelized vector-valued Gaussian Process (VVGP) approach with excellent computational efficiency while maintaining high accuracy. Consequently, serving as a surrogate model for the power flow solver, the DNN-kernelized VVGP enables significantly faster but accurate risk assessment compared to the power flow solver. The developed surrogate model evaluates low-order N - k events that contain more than 90% instances by adeptly capturing the topological features while the high-order N - k events are assessed via a power flow solver, thereby striking a balance between computational efficiency and uncertainty quantification accuracy. Moreover, the model incorporates a Support Vector Machine (SVM) classifier to resample concerning low-probability tail events to counteract the biases potentially introduced during the DNN-kernelized VVGP evaluations. Simulations conducted on the modified IEEE 24-bus, 118-bus, and European 1354-bus systems demonstrate that the proposed method maintains the accuracy benchmark set by MCS while significantly reducing computational demands in large-scale power systems as compared to other state-of-the-art methods.
A Comparison of Interface Growth Models Applied to Rayleigh–Taylor and Richtmyer–Meshkov Instabilities
Sophisticated numerical models that contain fluid interfaces rely upon interface evolution models to approximate the transition to turbulence near interfaces, in the presence of Rayleigh–Taylor (RTI) or Richtmyer–Meshkov (RMI) instability. Semi-analytical models have been developed in recent decades to predict the interface growth from an initial state into the nonlinear regime. Two of these models are considered in this study. They are the Goncharov and the z-models. Both of these interface models have strengths and weaknesses, which are examined here. Both of them have been implemented in the xRAGE compressible flow solver, which models fluid interfaces. The flow solver provides the fluids acceleration as a body force to the interface model. The purpose of such interface model is to evolve the early times of interface position as a subgrid model within a compressible flow simulation in order to then initialize a turbulence model. In this work, the interface models are assessed and compared for their evolution of RTI and RMI. The z-model performed better than the Goncharov model for all cases that were explored.
Current Status of the Finite-Element Fluid Solver (COFFE) within HPCMP CREATE™-AV Kestrel
COFFE is the finite-element flow solver within HPCMP CREATE-AV™ Kestrel. Kestrel supports a range of flow solver fidelity options to support the DoD acquisition community, and COFFE targets the need for high-fidelity flow solutions. The COFFE solver, like all components of Kestrel, is under continual development as part of the CREATE-AV program. This paper documents the usage of COFFE on several workshop cases, which demonstrate new Kestrel capabilities and exercise features unique to COFFE. It concludes with a brief discussion of upcoming features in development for COFFE.
A multi-scale network method for two-phase flow in porous media
Pore-network models of porous media are useful in the study of pore-scale flow in porous media. In order to extract macroscopic properties from flow simulations in pore-networks, it is crucial the networks are large enough to be considered representative elementary volumes. However, existing two-phase network flow solvers are limited to relatively small domains. For this purpose, a multi-scale pore-network (MSPN) method, which takes into account flow-rate effects and can simulate larger domains compared to existing methods, was developed. In our solution algorithm, a large pore network is partitioned into several smaller sub-networks. The algorithm to advance the fluid interfaces within each subnetwork consists of three steps. First, a global pressure problem on the network is solved approximately using the multiscale finite volume (MSFV) method. Next, the fluxes across the subnetworks are computed. Lastly, using fluxes as boundary conditions, a dynamic two-phase flow solver is used to advance the solution in time. Simulation results of drainage scenarios at different capillary numbers and unfavourable viscosity ratios are presented and used to validate the MSPN method against solutions obtained by an existing dynamic network flow solver.
High fidelity blade-resolved and actuator line data from a 16 turbine wind farm simulation using ExaWind
This data was generated with the ExaWind code suite (https://github.com/Exawind) as a demonstration of a large, 16 turbine wind farm simulation, calculated using two different levels of fidelity. The lower level of fidelity approach uses an actuator line approach to represent the turbines, and was simulated with AMR-Wind (https://github.com/Exawind/amr-wind/) as the background flow solver, coupled to OpenFAST (https://github.com/OpenFAST/openfast). The higher level of fidelity simulation uses a blade-resolved approach, and is done using AMR-Wind, Nalu-Wind (https://github.com/Exawind/nalu-wind), OpenFAST, and TIOGA (https://github.com/Exawind/tioga). In the blade-resolved simulation, ExaWind couples together a background flow solver, AMR-Wind, and a near-body solver, Nalu-Wind, through an overset technique from the TIOGA application. OpenFAST handles the structural dynamics of the turbine blades and towers, which informs the fluid-structure interaction of the wind turbines with the flow solvers. In the actuator line simulation, a mesh of 295M elements was used for a 5km x 5km domain, and it was simulated using 256 nodes (2048 GPU's) on the Oak Ridge Leadership Computing Facility Frontier supercomputer. For the blade-resolved simulation, 1.5B element mesh was used in the AMR-Wind background 5km x 5km domain, and 16M elements were used for each turbine in the Nalu-Wind domains, for a total of 1.7B elements. This was simulated using 384 nodes on Frontier, with each node using 56 cores for Nalu-Wind and 8 GPU cores. The data in this archive includes the turbine outputs from OpenFAST, 2D sampling planes from AMR-Wind, and full-field solution files from AMR-Wind and Nalu-Wind.
An immersed boundary method for fluid–structure interaction with compressible multiphase flows
This paper presents a two-dimensional immersed boundary method for fluid–structure interaction with compressible multiphase flows involving large structure deformations. This method involves three important parts: flow solver, structure solver and fluid–structure interaction coupling. In the flow solver, the compressible multiphase Navier–Stokes equations for ideal gases are solved by a finite difference method based on a staggered Cartesian mesh, where a fifth-order accuracy Weighted Essentially Non-Oscillation (WENO) scheme is used to handle spatial discretization of the convective term, a fourth-order central difference scheme is employed to discretize the viscous term, the third-order TVD Runge–Kutta scheme is used to discretize the temporal term, and the level-set method is adopted to capture the multi-material interface. In this work, the structure considered is a geometrically non-linear beam which is solved by using a finite element method based on the absolute nodal coordinate formulation (ANCF). The fluid dynamics and the structure motion are coupled in a partitioned iterative manner with a feedback penalty immersed boundary method where the flow dynamics is defined on a fixed Lagrangian grid and the structure dynamics is described on a global coordinate. We perform several validation cases (including fluid over a cylinder, structure dynamics, flow induced vibration of a flexible plate, deformation of a flexible panel induced by shock waves in a shock tube, an inclined flexible plate in a hypersonic flow, and shock-induced collapse of a cylindrical helium cavity in the air), and compare the results with experimental and other numerical data. The present results agree well with the published data and the current experiment. Finally, we further demonstrate the versatility of the present method by applying it to a flexible plate interacting with multiphase flows.
The MFiX Particle-in-Cell Method (MFiX-PIC) Theory Guide
MFiX (Multiphase Flow with Interphase eXchanges) is an open-source multiphase flow solver developed at the National Energy Technology Laboratory. Within the code, users have access to a single phase or interpenetrating continua-based multiphase two-fluid model (TFM), a discrete element model (DEM), and a particle-in-cell model (PIC). TFM, DEM, and PIC can all be used to create multiphase simulations that include hydrodynamics, chemical reactions, and heat transfer.
Transported PDF Modeling of Compressible Turbulent Reactive Flows by using the Eulerian Monte Carlo Fields Method
Although the transported probability density function (PDF) method has been developed for decades, its application has been mainly focused on the low-Mach number flow problems. This work extends the transported PDF method to compressible flow problems. The Eulerian Monte Carlo fields (EMCF) solution method is employed to solve the transported PDF equation for compressible flow problems. A pseudo stagnation enthalpy is introduced and its stochastic partial differential equation is derived to ensure total energy conservation numerically. A new mixing model called interaction by partial exchange with mean (IPEM) is introduced to expand the available choices of mixing models for the EMCF method. The consistency of the EMCF method is examined for solving the transported PDF equation. Numerical implementation details are discussed, such as the density coupling between the compressible flow solver and the EMCF solver, discretization schemes for the mixing terms and the stochastic terms. The implemented compressible flow solver coupled with the EMCF solver is verified and validated in a series of test cases with increasing level of complexity, ranging from a statistically one-dimensional turbulent mixing layer to a self-excited resonance model rocket combustor. It is observed that in general with the increase of compressibility, there is an increase in the sensitivity of the modeling results to the different models and algorithms. This makes it necessary to develop a thorough understanding of the model sensitivity in order to develop a robust and accurate simulation solver for highly compressible turbulent reactive flows. The thermo-acoustic instability inside the model rocket combustor case is captured reasonably, which demonstrates the overall capability of the developed compressible turbulent combustion solver based on the transported PDF method.
Numerical Investigation of Vertical Plunging Jet Using a Hybrid Multifluid–VOF Multiphase CFD Solver
A novel hybrid multiphase flow solver has been used to conduct simulations of a vertical plunging liquid jet. This solver combines a multifluid methodology with selective interface sharpening to enable simulation of both the initial jet impingement and the long-time entrained bubble plume phenomena. Models are implemented for variable bubble size capturing and dynamic switching of interface sharpened regions to capture transitions between the initially fully segregated flow types into the dispersed bubbly flow regime. It was found that the solver was able to capture the salient features of the flow phenomena under study and areas for quantitative improvement have been explored and identified. In particular, a population balance approach is employed and detailed calibration of the underlying models with experimental data is required to enable quantitative prediction of bubble size and distribution to capture the transition between segregated and dispersed flow types with greater fidelity.
LEM-CF Premixed Tool Kit
The purpose of LEM-CF Premixed Tool Kit is to process premixed flame simulation data from the LEM-CF solver (https://fileshare.craft-tech.com/clusters/view/lem-cf) into a large-eddy simulation (LES) subgrid model database. These databases may be used with a user-defined-function (UDF) that is included in the Tool Kit. The subgrid model UDF may be used with the ANSYS FLUENT flow solver or other commercial flow solvers.