Search NASA⌕ Search

SEARCH · Search NASA

Results for “fluid-fluid interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

27 records · Page 2

Shock-driven dispersal of a corrugated finite-thickness particle layer

A research area emerging in the multiphase flow community is the study of shock-driven multiphase instability (SDMI), a gas–particle analog of the traditional fluid-fluid Richtmyer–Meshkov instability (RMI). In this work, we study the interaction of planar air shocks with corrugated glass particle curtains through the use of numerical simulations with an Eulerian–Lagrangian approach. One objective of this study is to compare the simulated particle curtains to a comparable set of shock tube experiments performed to analyze traditional RMI of a gas curtain. The simulations are set to match the experimental shock Mach numbers and perturbation wavelengths (3.6 and 7.2 mm) while also matching the Atwood number of the experiments to the multiphase Atwood number of the simulations. Varying particle diameters are tested in the simulations to explore the impact of particle diameter on the evolution of the particle curtain. This simulation setup allows for a one-to-one comparison between RMI and SDMI under comparable conditions while also allowing for a separate study into the validity of the use of the multiphase Atwood number to compare the single-phase and multiphase instabilities. In particular, we show that the comparison depends on the diameter of the particles (thus, dependent on the Stokes number of the flow). A second objective of this study is to analyze the effect of the initial particle volume fraction on the evolution of the curtain and the behavior of the instability. This is done through analyzing the effect of the multiphase terms of the vorticity evolution equation on the vorticity deposition in SDMI. Also discussed is the effect of the particle diameter on the multiphase generation terms as well as in the baroclinic vorticity generation term in SDMI as the shock passes over the curtain.

42 ENGINEERING↗

Wetting of Nanopatterned Grooved Surfaces

The wetting by perfluoromethylcyclohexane of a well-defined silicon grating with a channel width of 16 nm has been studied using transmission small angle x-ray scattering. Prefilling, capillary filling, and postfilling wetting regimes have been identified. A detailed comparison of the data with theory reveals the importance of long-ranged substrate-fluid and fluid-fluid interactions for determining the wetting behavior on these length scales, especially at the onset of capillary condensation and in the prefilling regime.

36 MATERIALS SCIENCE↗

Kinetics of Fluid Demixing in Complex Plasmas: Role of Two-Scale Interactions

Using experiments and combining theory and computer simulations, we show that binary complex plasmas are particularly good model systems to study the kinetics of fluid-fluid demixing at the 'atomistic' (individual particle) level. The essential parameters of interparticle interactions in complex plasmas, such as the interaction range(s) and degree of nonadditivity, can be varied significantly, which allows systematic investigations of different demixing regimes. The critical role of competition between long-range and short-range interactions at the initial stage of the spinodal decomposition is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A separate phase drag model and a surrogate approximation for simulation of the steam assisted gravity drainage (SAGD) process

General ensemble phase averaged equations for multiphase flows have been specialized for the simulation of the steam assisted gravity drainage (SAGD) process. In the average momentum equation, fluid-solid and fluid-fluid viscous interactions are represented by separate force terms. This equation has a form similar to that of Darcy’s law for multiphase flow but augmented by the fluid-fluid viscous forces. Models for these fluid-fluid interactions are suggested and implemented into the numerical code CartaBlanca. Numerical results indicate that the model captures the main features of the multiphase flow in the SAGD process, but the detailed features, such as plumes are missed. We find that viscous coupling among the fluid phases is important. Advection time scales for the different fluids differ by several orders of magnitude because of vast viscosity differences. Numerically resolving all of these time scales is time consuming. To address this problem, we introduce a steam surrogate approximation to increase the steam advection time scale, while keeping the mass and energy fluxes well approximated. This approximation leads to about a 40-fold speed-up in execution speed of the numerical calculations at the cost of a few percent error in the relevant quantities.

02 PETROLEUM↗

Time-Dependent Thermally-Driven Interfacial Flows in Multilayered Fluid Structures

A computational study of thermally-driven convection in multilayered fluid structures will be performed to examine the effect of interactions among deformable fluid-fluid interfaces on the structure of time-dependent flow in these systems. Multilayered fluid structures in two models configurations will be considered: the differentially heated rectangular cavity with a free surface, and the encapsulated cylindrical liquid bridge. An extension of a numerical method developed as part of our recent NASA Fluid Physics grant will be used to account for finite deformations of fluid-fluid interfaces.

Haj-Hariri, Hossein↗

Wetting of Nanopatterned Grooved Surfaces

The wetting by perfluoromethylcyclohexane of a well-defined silicon grating with a channel width of 16 nm has been studied using transmission small angle x-ray scattering. Prefilling, capillary filling, and postfilling wetting regimes have been identified. A detailed comparison of the data with theory reveals the importance of long-ranged substrate-fluid and fluid-fluid interactions for determining the wetting behavior on these length scales, especially at the onset of capillary condensation and in the prefilling regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of film and droplet flow on wide aperture fractures using Smoothed Particle Hydrodynamics

Simulation of flow in fractured porous media represents a challenge due to the highly non-linear dynamics of fluid-air interfaces. Here we present small-scale flow simulations on wide aperture fractures using a modified three-dimensional multiphase SPH model \cite{Tartakovsky2005}. The model is modified to include the effects of random thermal noise. The model is able to reproduce a wide range of wetting conditions and Reynolds numbers encountered in laboratory experiments using pairwise fluid-fluid and solid-fluid interaction forces. Static and transient flow dynamics are compared to empirical and semianalytical solutions: (1) Droplets in a critical state are in agreement with laboratory experiments of \cite{ElSherbini2004}. (2) Well-defined random thermal noise is introduced via the fluctuation-dissipation theorem and its effect on dynamics of droplets in a critical state is investigated. (3) Transient flow dynamics on dry surfaces are validated using the dimensionless relationships established by \cite{Podgorski2001} and compared to (4) dynamics on prewetted surfaces where flow velocities are shown to be nearly tripled. Finally we establish flow regimes and occurrence of trailing films on initially dry fracture surfaces based on dimensionless scaling parameters and Reynolds numbers.

Environmental Molecular Sciences Laboratory↗

Simulation of gravity driven free-surface flow in fractured geological media

Abstract—Simulation of unsaturated free-surface flow in fractured geological media represents a challenge due to the highly heterogeneous flow field induced by extensive faults, joints and fissures. Free-surface flow in unsaturated media leads to highly intermittent flow regimes and flow velocities well above those assumed for the bulk volume. However, common modeling approaches relying on volume-averaged effective equations fail to capture this flow feature. In this work we present micro-scale flow simulations using a three-dimensional multiphase SPH code. Pairwise fluid-fluid and solid-fluid interaction forces are used to simulate a wide range of wetting conditions encountered on rock surfaces. It is shown that static contact angles for sessiles droplets are independent of the model discretization, i.e. the total amount of particles. Thus, computation times can be reduced without sacrificing qualitative or quantitative information. Furthermore we show that our model is in accordance with general scaling laws for droplet flow.

Kordilla, Jannes↗