Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometric phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Anomalous Hall crystals in rhombohedral multilayer graphene. II. General mechanism and a minimal model

Here we propose a minimal "three-patch model"for the anomalous Hall crystal (AHC), a topological electronic state that spontaneously breaks both time-reversal symmetry and continuous translation symmetry. The proposal for this state is inspired by the recently observed integer and fractional quantum Hall states in rhombohedral multilayer graphene at zero magnetic field. There, interaction effects appear to amplify the effects of a weak moiré potential, leading to the formation of stable, isolated Chern bands. It has been further shown that Chern bands are stabilized in mean-field calculations even without a moiré potential, enabling a realization of the AHC state. Our model is built on the dissection of the Brillouin zone into patches centered around high-symmetry points. Within this model, the wave functions at high-symmetry points fully determine the topology and energetics of the state. We extract two quantum geometrical phases of the noninteracting wave functions that control the stability of the topologically nontrivial AHC state. The model predicts that the AHC state wins over the topological trivial Wigner crystal in a wide range of parameters, and agrees very well with the results of full self-consistent Hartree-Fock calculations of the rhombohedral multilayer graphene Hamiltonian.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Strain-driven oxygen vacancy ordering in LaNiO 3 thin films revealed by integrated differential phase contrast imaging in scanning transmission electron microscopy

Rare-earth nickelates, such as LaNiO 3 (LNO), exhibit complex electronic properties, with ordered oxygen vacancies (OOV) influencing conductivity and magnetic behavior. We investigate the structural stability of strain-induced OOV phases in LNO thin films grown on SrTiO 3 substrates and the impact of Ruddlesden–Popper (RP) faults. Using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and integrated differential phase contrast (iDPC) STEM imaging, we conducted atomic-scale structural and compositional analyses of OOV. Geometric phase analysis (GPA) was employed to measure the strain in fault-free and RP fault regions, while density functional theory (DFT) calculations explored different OOV arrangements in the LNO phase. Simulated iDPC-STEM imaging of energy-stabilized structures was performed to correlate with experimental results. Here, our findings reveal superstructure modulation in the chemical composition and atomic-scale lattice structure in LNO, primarily due to the formation of the OOV in Ni–O layers of the LaNiO 2.5 phase. The out-of-plane compressive strain of about 2% stabilizes this phase, reducing the strain, diminishing OOV, and transforming them into LNO.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Photometric properties of zodiacal light particles

A number of optical and physical parameters are derived on the basis of ground-based, spacecraft, and rocket photometry and polarimetry, under the assumption that number density, mean particle size, and albedo, vary with heliocentric distance. It is noted that average individual interplanetary particles have a small but definite opposition effect, involving a single scattering albedo in the V-band and a zero-phase geometric albedo; modeled by a power law, both decrease with increasing heliocentric distance as r to the -0.54 power. The color of dust particles and the color's variation with solar phase angle, closely resemble those of C asteroids. These findings are consistent with the zodiacal cloud's origin in collisions among asteroids.

Lumme, K.↗
DOE OSTI2024

Quantum control and Berry phase of electron spins in rotating levitated diamonds in high vacuum

Levitated diamond particles in high vacuum with internal spin qubits have been proposed for exploring macroscopic quantum mechanics, quantum gravity, and precision measurements. The coupling between spins and particle rotation can be utilized to study quantum geometric phase, create gyroscopes and rotational matter-wave interferometers. However, previous efforts in levitated diamonds struggled with vacuum level or spin state readouts. To address these gaps, we fabricate an integrated surface ion trap with multiple stabilization electrodes. This facilitates on-chip levitation and, for the first time, optically detected magnetic resonance measurements of a nanodiamond levitated in high vacuum. The internal temperature of our levitated nanodiamond remains moderate at pressures below 10 -5 Torr. We have driven a nanodiamond to rotate up to 20 MHz (1.2 × 10 9 rpm), surpassing typical nitrogen-vacancy (NV) center electron spin dephasing rates. Using these NV spins, we observe the effect of the Berry phase arising from particle rotation. In addition, we demonstrate quantum control of spins in a rotating nanodiamond. These results mark an important development in interfacing mechanical rotation with spin qubits, expanding our capacity to study quantum phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2018

Modified Geometric Truncation of the Scattering Phase Function

Phase function of light scattering on large atmospheric particles has very strong peak in forward direction constituting a challenge for accurate numerical calculations of radiance required in remote sensing problems. Scaling transformation replaces original phase function with a sum of the delta function and a new regular smooth phase function. Geometric truncation is one of the ways to construct such a smooth function. The replacement phase function coincides with the original one outside the forward cone and preserves the asymmetry parameter. It has discontinuity at the cone. Another simple functional form of the replacement phase function within the cone is suggested. It enables continuity and allows for a number of modifications. Three of them are considered in this study: preserving asymmetry parameter, providing continuity of the 1st derivative of the phase function, and preserving mean scattering angle. Yet another problem addressed in this study is objective selection of the width of the forward cone. That angle affects truncation fraction and values of the phase function within the cone. A heuristic approach providing unambiguous criterion of selection of the truncation angle is proposed. The approach has easy numerical implementation. Suggested modifications were tested on cloud phase function using discrete ordinates and Monte Carlo methods. It was shown that the modifications provide better accuracy of the radiance computation compare to the original geometric truncation with discrete ordinates while continuous derivative approach provides significant gain in computer time with Monte Carlo simulations.

Alexander Radkevich↗
DOE OSTI2026

Gauging nexus between topological and fracton phases

Coupled layer constructions are a valuable tool for capturing the universal properties of certain interacting quantum phases of matter in terms of the simpler data that characterizes the underlying layers. In the study of fracton phases, the X-Cube model in 3+1D can be realized via such a construction by starting with a stack of 2+1D Toric Codes and turning on a coupling which condenses a composite "particle-string" object. In a recent work [Phys. Rev. B 112, 125124 (2025)], we have demonstrated that in fact, the particle-string can be viewed as a symmetry defect of a topological 1-form symmetry. In this paper, we study the result of gauging this symmetry in depth. We unveil a rich gauging web relating the X-Cube model to symmetry protected topological (SPT) phases protected by a mix of subsystem and higher-form symmetries, subsystem symmetry fractionalization in the 3+1D Toric Code, and non-trivial extensions of topological symmetries by subsystem symmetries. Here, our work emphasizes the importance of topological symmetries in non-topological, geometric phases of matter.

Anyons↗
NASA NTRS1992

Control and stabilization of nonholonomic dynamic systems

The paper establishes a theoretical framework for the control of nonholonomic dynamic systems, i.e., dynamic systems with nonintegrable constraints, with emphasis on control properties for nonholonomic systems that have no counterpart in holonomic systems. A model for nonholonomic dynamic systems is presented in terms of differential-algebraic equations defined on a phase space. A reduction procedure is carried out to obtain reduced-order state equations. Conditions for smooth asymptotic stabilization to an m-dimensional equilibrium manifold are presented. It is also demonstrated that a single equilibrium solution cannot be asymptotically stabilized using continuous state feedback. An approach using geometric phases is developed as a basis for the control of Caplygin systems.

Bloch, Anthony M.↗
DOE OSTI2026

Efficient Berry phase calculation via adaptive variational quantum computing approach

We present an adaptive variational quantum algorithm to estimate the Berry phase accumulated by a nondegenerate ground state under cyclic, adiabatic evolution of a time-dependent Hamiltonian. Our method leverages cyclic adiabatic evolution of the Hamiltonian and employs adaptive variational quantum algorithms for state preparation and evolution, optimizing circuit efficiency while maintaining high accuracy. We benchmark our approach on dimerized Fermi–Hubbard chains with four sites, demonstrating precise Berry phase simulations in both noninteracting and interacting regimes. Our results show that circuit depths reach up to 106 layers for noninteracting systems and increase to 279 layers for interacting systems due to added complexity. In addition, we demonstrate the robustness of our scheme across a wide range of parameters governing adiabatic evolution and variational algorithms. These findings highlight the potential of adaptive variational quantum algorithms for advancing quantum simulations of topological materials and computing geometric phases in strongly correlated systems.

Mootz, Martin [Ames Laboratory (AMES), Ames, IA (U↗
DOE OSTI2024

Role of bath-induced many-body interactions in the dissipative phases of the Su-Schrieffer-Heeger model

The Su-Schrieffer-Heeger chain is a prototype example of a symmetry-protected topological insulator. Coupling it nonperturbatively to local thermal environments, either through the intercell or the intracell fermion tunneling elements, modifies the topological window. To understand this effect, we employ the recently developed reaction-coordinate polaron transform (RCPT) method, which allows treating system-bath interactions at arbitrary strengths. The effective system Hamiltonian, which is obtained via the RCPT, exposes the impact of the baths on the SSH chain through renormalization of tunneling elements and the generation of many-body interaction terms. By performing exact diagonalization and computing the ensemble geometric phase, a topological invariant, which is applicable even to systems at finite temperature, we distinguish the trivial band insulator (BI) from the topological insulator (TI) phases. Furthermore, through the RCPT mapping, we are able to pinpoint the main mechanism behind the extension of the parameter space for the TI or the BI phases (depending on the coupling scheme, intracell or intercell), which is the bath-induced, dimerized, many-body interaction. In conclusion, we also study the effect of on-site staggered potentials on the SSH phase diagram and discuss extensions of our method to higher dimensions.

1-dimensional systems↗
DOE OSTI2021

Asymmetric Fraunhofer spectra in a topological insulator-based Josephson junction

Josephson junctions with topological insulators as their weak link (S–TI–S junctions) are predicted to host Majorana fermions, which are key to creating qubits for topologically protected quantum computing. But the details of the S–TI–S current-phase relation and its interplay with magnetic fields are not well understood. We fabricate a Bi 2 Se 3 junction with NbTi leads and measure the Fraunhofer patterns of the junction with applied in-plane fields. We observe that asymmetric Fraunhofer patterns appear in the resistance maps of B z vs B x,y , with aperiodic node spacings. These asymmetric patterns appear even at zero parallel field and for temperatures up to 1 K. The anomalous features are compared to asymmetric Fraunhofer patterns expected for finite Cooper pair momentum shifts as well as geometric effects. We show that the geometric effects can dominate, independent of in-plane field magnitude. Furthermore, these results are important for differentiating geometrical phase shifts from those caused by Cooper pair momentum shifting, Majorana mode signatures, or other unconventional superconducting behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Mitigating Heavy Ion Irradiation‐Induced Degradation in p‐type SnO Thin‐Film Transistors at Room Temperature

The study investigates the mitigation of radiation damage on p‐type SnO thin‐film transistors (TFTs) with a fast, room‐temperature annealing process. Atomic layer deposition is utilized to fabricate bottom‐gate TFTs of high‐quality p‐type SnO layers. After 2.8 MeV Au 4+ irradiation at a fluence level of 5.2 × 10 12 ions cm −2 , the output drain current and on/off current ratio ( I on / I off ) decrease by more than one order of magnitude, field‐effect mobility ( μ FE ) reduces more than four times, and subthreshold swing (SS) increases more than four times along with a negative shift in threshold voltage. The observed degradation is attributed to increased surface roughness and defect density, as confirmed by scanning electron microscopy (SEM), high‐resolution micro‐Raman, and transmission electron microscopy (TEM) with geometric phase analysis (GPA). A technique is demonstrated to recover the device performance at room temperature and in less than a minute, using the electron wind force (EWF) obtained from low‐duty‐cycle high‐density pulsed current. At a pulsed current density of 4.0 × 10 5 A cm −2 , approximately four times increase in I on / I off is observed, 41% increase in μ FE , and 20% decrease in the SS of the irradiated TFTs, suggesting effectiveness of the new annealing technique.

Al-Mamun, Nahid Sultan↗
DOE OSTI2024

Epitaxial Thin Film Growth on Recycled SrTiO 3 Substrates Toward Sustainable Processing of Complex Oxides

Complex oxide thin films cover a range of physical properties and multifunctionalities that are critical for logic, memory, and optical devices. Typically, the high‐quality epitaxial growth of these complex oxide thin films requires single crystalline oxide substrates such as SrTiO 3 (STO), MgO, LaAlO 3 , a‐Al 2 O 3, and many others. Recent successes in transferring these complex oxides as free‐standing films not only offer great opportunities in integrating complex oxides on other devices, but also present enormous opportunities in recycling the deposited substrates after transfer for cost‐effective and sustainable processing of complex oxide thin films. In this work, the surface modification effects introduced on the recycled STO are investigated, and their impacts on the microstructure and properties of subsequently grown epitaxial oxide thin films are assessed and compared with those grown on the pristine substrates. Detailed analyses using high‐resolution scanning transmission electron microscopy and geometric phase analysis demonstrate distinct strain states on the surfaces of the recycled STO versus the pristine substrates, suggesting a pre‐strain state in the recycled STO substrates due to the previous deposition layer. These findings offer opportunities in growing highly mismatched oxide films on the recycled STO substrates with enhanced physical properties. Specifically, yttrium iron garnet (Y 3 Fe 5 O 12 ) films grown on recycled STO present different ferromagnetic responses compared to that on the pristine substrates, underscoring the effects of surface modification. The study demonstrates the feasibility of reuse and redeposition using recycled substrates. Via careful handling and preparation, high‐quality epitaxial thin films can be grown on recycled substrates with comparable or even better structural and physical properties toward sustainable process of complex oxide devices.

pre-strained STO surfaces↗
DOE OSTI2023

Moduli space reconstruction and Weak Gravity

Abstract We present a method to construct the extended Kähler cone of any Calabi-Yau threefold by using Gopakumar-Vafa invariants to identify all geometric phases that are related by flops or Weyl reflections. In this way we obtain the Kähler moduli spaces of all favorable Calabi-Yau threefold hypersurfaces withh 1,1 ≤ 4, including toric and non-toric phases. In this setting we perform an explicit test of the Weak Gravity Conjecture by using the Gopakumar-Vafa invariants to count BPS states. All of our examples satisfy the tower/sublattice WGC, and in fact they even satisfy the stronger lattice WGC.

Physics↗
DOE OSTI2026

Sub-melt nanosecond pulsed-laser induced densification and strain-field relaxation in single-crystal diamond

Dislocations and polishing-induced defect networks in synthetic diamond introduce local strain fields and broaden Raman features, limiting performance in optical, thermal, and electronic applications. Laser annealing is emerging as a promising approach to repair surface and near-surface defects in diamond without entering the melt regime, yet surface densification, defect-state modification, and associated structural changes have not been well quantified. In this work, we show that sub-melt nanosecond pulsed-laser annealing (PLA) induces near-surface densification and defect-mediated strain relaxation in single-crystal Chemical Vapor Deposition (CVD) diamond. Single- and two-pulse PLA were applied, and structural evolution was quantified using co-registered ISO 25,178 white-light interferometry, depth-resolved Raman spectroscopy, and cross-sectional STEM with geometric phase analysis (GPA). Across a 5 × 6 grid (n = 30), responsive regions exhibit large reductions in local slope (Sdq 45–65%), developed area (Sdr 60–90%), height spread (Sp, Sz 30–65%), void volume (Vv 57–60%), and roughness amplitude (Sa, Sq 48–57%), consistent with densification of ∼4–6.5 nm. Raman profiling shows narrowing of the diamond line and improved spectral uniformity to depths of ∼2–3 μm. Given that the Raman probing depth significantly exceeds the densified layer thickness, this response is interpreted as consistent with long-range strain-field redistribution originating from the near-surface region. STEM-GPA strain maps further support this interpretation, showing smoother strain fields, suppressed hotspots, and redistribution of localized strain concentrations following PLA. These results are consistent with defect-mediated strain relaxation and densification-driven modification of the near-surface energy state. The approach provides a scalable pathway for improving near-surface structural quality in diamond relevant to electronic, photonic, and quantum applications.

Areal surface metrology (ISO 25,178)↗
DOE OSTI2020

Probing the meta-stability of oxide core/shell nanoparticle systems at atomic resolution

Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their properties. Here, the in-situ electron-induced selective reduction of Mn 3 O 4 to MnO is studied in magnetic Fe 3 O 4 /Mn 3 O 4 and Mn 3 O 4 /Fe 3 O 4 core/shell nanoparticles by means of high-resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Such in-situ transformation allows mimicking the actual processes in operando environments. A multi-stage image analysis using geometric phase analysis combined with particle image velocity enables direct monitoring of the relationship between structure, chemical composition and strain relaxation during the Mn 3 O 4 reduction. In the case of Fe 3 O 4 /Mn 3 O 4 core/shell the transformation occurs smoothly without the formation of defects. However, for the inverse Mn 3 O 4 /Fe 3 O 4 core/shell configuration the electron beam-induced transformation occurs in different stages that include redox reactions and void formation followed by strain field relaxation via formation of defects. This study highlights the relevance of understanding the local dynamics responsible for changes in the particle composition in order to control stability and, ultimately, macroscopic functionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the role of local tunnel variations in early-stage lithiation of α-MnO₂ nanowires via in situ TEM

Understanding lithium-ion transport in tunnel-structured manganese oxides is essential for designing high-performance lithium-ion battery electrode materials. Here, we elucidate the early-stage lithiation mechanism of potassium-stabilized α-MnO 2 nanowires using in situ transmission electron microscopy (TEM) coupled with electron energy-loss spectroscopy (EELS), high-resolution TEM (HRTEM), and geometric phase analysis (GPA). Real-time TEM imaging reveals clear volume expansion at the reaction front, while EELS analysis uncovers lithium-ion diffusion far beyond this region, where no visible expansion is observed, indicating fast, defect-assisted transport. GPA and HRTEM analyses show that localized tensile and compressive strain fields, originating from pre-existing local tunnel structural variations, persist after lithiation. The tensile-strained regions enable lithium-ion insertion with minimal lattice distortion, offering additional free volume that facilitates rapid lithium-ion accommodation ahead of the structural transformation. Our results demonstrate a local tunnel variation-mediated fast diffusion pathway that precedes bulk reaction, underscoring the critical role of local strain in enabling early-stage lithium transport. Given the structural versatility of MnO 2 and its ability to accommodate diverse atomic arrangements beyond the well-known tunnel phases (β-, γ-, δ-, λ-, R-phases), our findings highlight the importance of understanding and engineering local structural environments. This work provides fundamental insights into the interplay between defects, strain, and ion dynamics, and presents defect engineering as a promising approach to enhance both rate performance and structural stability in manganese-based cathodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Self-Assembly of Anisotropic Particles on Curved Surfaces

The surface curvature of membranes, interfaces, and substrates plays a crucial role in shaping the self-assembly of particles adsorbed on these surfaces. However, little is known about the interplay between particle anisotropy and surface curvature and how they couple to alter the free energy landscape of particle assemblies. Using molecular dynamics simulations, we investigate the effect of prescribed curvatures on a quasi-2D assembly of anisotropic patchy particles. By varying curvature and surface coverage, we uncover a rich geometric phase diagram, with curvature inducing ordered structures entirely absent on planar surfaces. Large spatial domains of ordered structures can contain hidden microdomains of orientational textures imprinted by the surface on the assembly. The dynamical landscape is also reshaped by surface curvature, with a glass-like state emerging at modest densities and high curvature. Changes to the symmetry of the surface curvature are found to result in distinct structures, including phases with mesoscale ordering. In conclusion, our findings show that the coupling between surface curvature and particle geometry opens an unexplored space of morphologies and structures that can be exploited for material design.

Fluids↗
DOE OSTI2022

Demonstration of universal control between non-interacting qubits using the Quantum Zeno effect

The Zeno effect occurs in quantum systems when a very strong measurement is applied, which can alter the dynamics in non-trivial ways. Despite being dissipative, the dynamics stay coherent within any degenerate subspaces of the measurement. Here we show that such a measurement can turn a single-qubit operation into a two- or multi-qubit entangling gate, even in a non-interacting system. We demonstrate this gate between two effectively non-interacting transmon qubits. Our Zeno gate works by imparting a geometric phase on the system, conditioned on it lying within a particular non-local subspace. These results show how universality can be generated not only by coherent interactions as is typically employed in quantum information platforms, but also by Zeno measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗