Search NASA⌕ Search

SEARCH · Search NASA

Results for “graph model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Regional Rates of Young US Forest Growth Estimated From Annual Landsat Disturbance History and IKONOS Stereo Imagery

Forests of the Contiguous United States (CONUS) have been found to be a large contributor to the global atmospheric carbon sink. The magnitude and nature of this sink is still uncertain and recent studies have sought to define the dynamics that control its strength and longevity. The Landsat series of satellites has been a vital resource to understand the long-term changes in land cover that can impact ecosystem function and terrestrial carbonstock. We combine annual Landsat forest disturbance history from 1985 to 2011 with single date IKONOS stereoimagery to estimate the change in young forest canopy height and above ground live dry biomass accumulation for selected sites in the CONUS. Our approach follows an approximately linear growth rate following clearing over short intervals and does not estimate the distinct non-linear growth rate over longer intervals.We produced canopy height models by differencing digital surface models estimated from IKONOS stereo pairs with national elevation data (NED). Correlations between height and biomass were established independently using airborne LiDAR, and then applied to the IKONOS-estimated canopy height models. Graphing current biomass against time since disturbance provided biomass accumulation rates. For 20 study sites distributed across five regions of the CONUS, 19 showed statistically significant recovery trends (p is less than 0.001) with canopy growth from 0.26 m yr-1to 0.73 m yr-1. Above ground live dry biomass (AGB) density accumulation ranged from 1.31 t/ha yr-1 to 12.47 t/ha yr-1. Mean forest AGB accumulationwas 6.31 t/ha yr-1 among all sites with significant growth trends. We evaluated the accuracy of our estimates by comparing to field estimated site index curves of growth, airborne LiDAR data, and independent model predictions of C accumulation. Growth estimates found with this approach are consistent with site index curves and total biomass estimates fall within the range of field estimates. This is aviable approach to estimate forest biomass accumulation in regions with clear-cut harvest disturbances.

Neigh, Christopher S. R.↗
NASA NTRS1991

Performance and stability of telemanipulators using bilateral impedance control

A new method of control for telemanipulators called bilateral impedance control is investigated. This new method differs from previous approaches in that interaction forces are used as the communication signals between the master and slave robots. The new control architecture has several advantages: (1) It allows the master robot and the slave robot to be stabilized independently without becoming involved in the overall system dynamics; (2) It permits the system designers to arbitrarily specify desired performance characteristics such as the force and position ratios between the master and slave; (3) The impedance at both ends of the telerobotic system can be modulated to suit the requirements of the task. The main goals of the research are to characterize the performance and stability of the new control architecture. The dynamics of the telerobotic system are described by a bond graph model that illustrates how energy is transformed, stored, and dissipated. Performance can be completely described by a set of three independent parameters. These parameters are fundamentally related to the structure of the H matrix that regulates the communication of force signals within the system. Stability is analyzed with two mathematical techniques: the Small Gain Theorem and the Multivariable Nyquist Criterion. The theoretical predictions for performance and stability are experimentally verified by implementing the new control architecture on a multidegree of freedom telemanipulator.

Moore, Christopher Lane↗
NASA NTRS1994

Program Finds Minimal Cut Sets

CUTSETS computer program identifies all minimal cut sets for given node. Software package contains subprograms that solve for minimal cut sets of fault trees and digraphs by use of object-oriented programming techniques. Cut-set codes used to solve graph models for reliability analysis and identify potential single-point failures in modeled system. Includes utility subprogram that converts popular COD-format diagraph-model-description files into text input files suitable for use with other CUT-SETS subprograms. FEAT (MSC-21873) and FIRM (MSC-21860). Written in C language.

Iverson, D. L.↗
NASA NTRS2011

Software Users Manual (SUM): Extended Testability Analysis (ETA) Tool

This software user manual describes the implementation and use the Extended Testability Analysis (ETA) Tool. The ETA Tool is a software program that augments the analysis and reporting capabilities of a commercial-off-the-shelf (COTS) testability analysis software package called the Testability Engineering And Maintenance System (TEAMS) Designer. An initial diagnostic assessment is performed by the TEAMS Designer software using a qualitative, directed-graph model of the system being analyzed. The ETA Tool utilizes system design information captured within the diagnostic model and testability analysis output from the TEAMS Designer software to create a series of six reports for various system engineering needs. The ETA Tool allows the user to perform additional studies on the testability analysis results by determining the detection sensitivity to the loss of certain sensors or tests. The ETA Tool was developed to support design and development of the NASA Ares I Crew Launch Vehicle. The diagnostic analysis provided by the ETA Tool was proven to be valuable system engineering output that provided consistency in the verification of system engineering requirements. This software user manual provides a description of each output report generated by the ETA Tool. The manual also describes the example diagnostic model and supporting documentation - also provided with the ETA Tool software release package - that were used to generate the reports presented in the manual

Maul, William A.↗
NASA NTRS2013

Software Tools to Support the Assessment of System Health

This presentation provides an overview of three software tools that were developed by the NASA Glenn Research Center to support the assessment of system health: the Propulsion Diagnostic Method Evaluation Strategy (ProDIMES), the Systematic Sensor Selection Strategy (S4), and the Extended Testability Analysis (ETA) tool. Originally developed to support specific NASA projects in aeronautics and space, these software tools are currently available to U.S. citizens through the NASA Glenn Software Catalog. The ProDiMES software tool was developed to support a uniform comparison of propulsion gas path diagnostic methods. Methods published in the open literature are typically applied to dissimilar platforms with different levels of complexity. They often address different diagnostic problems and use inconsistent metrics for evaluating performance. As a result, it is difficult to perform a one ]to ]one comparison of the various diagnostic methods. ProDIMES solves this problem by serving as a theme problem to aid in propulsion gas path diagnostic technology development and evaluation. The overall goal is to provide a tool that will serve as an industry standard, and will truly facilitate the development and evaluation of significant Engine Health Management (EHM) capabilities. ProDiMES has been developed under a collaborative project of The Technical Cooperation Program (TTCP) based on feedback provided by individuals within the aircraft engine health management community. The S4 software tool provides a framework that supports the optimal selection of sensors for health management assessments. S4 is structured to accommodate user ]defined applications, diagnostic systems, search techniques, and system requirements/constraints. One or more sensor suites that maximize this performance while meeting other user ]defined system requirements that are presumed to exist. S4 provides a systematic approach for evaluating combinations of sensors to determine the set or sets of sensors that optimally meet the performance goals and the constraints. It identifies optimal sensor suite solutions by utilizing a merit (i.e., cost) function with one of several available optimization approaches. As part of its analysis, S4 can expose fault conditions that are difficult to diagnose due to an incomplete diagnostic philosophy and/or a lack of sensors. S4 was originally developed and applied to liquid rocket engines. It was subsequently used to study the optimized selection of sensors for a simulation ]based aircraft engine diagnostic system. The ETA Tool is a software ]based analysis tool that augments the testability analysis and reporting capabilities of a commercial ]off ]the ]shelf (COTS) package. An initial diagnostic assessment is performed by the COTS software using a user ]developed, qualitative, directed ]graph model of the system being analyzed. The ETA Tool accesses system design information captured within the model and the associated testability analysis output to create a series of six reports for various system engineering needs. These reports are highlighted in the presentation. The ETA Tool was developed by NASA to support the verification of fault management requirements early in the Launch Vehicle process. Due to their early development during the design process, the TEAMS ]based diagnostic model and the ETA Tool were able to positively influence the system design by highlighting gaps in failure detection, fault isolation, and failure recovery.

Melcher, Kevin J.↗
NASA NTRS2015

A Wavelet Analysis Approach for Categorizing Air Traffic Behavior

In this paper two frequency domain techniques are applied to air traffic analysis. The Continuous Wavelet Transform (CWT), like the Fourier Transform, is shown to identify changes in historical traffic patterns caused by Traffic Management Initiatives (TMIs) and weather with the added benefit of detecting when in time those changes take place. Next, with the expectation that it could detect anomalies in the network and indicate the extent to which they affect traffic flows, the Spectral Graph Wavelet Transform (SGWT) is applied to a center based graph model of air traffic. When applied to simulations based on historical flight plans, it identified the traffic flows between centers that have the greatest impact on either neighboring flows, or flows between centers many centers away. Like the CWT, however, it can be difficult to interpret SGWT results and relate them to simulations where major TMIs are implemented, and more research may be warranted in this area. These frequency analysis techniques can detect off-nominal air traffic behavior, but due to the nature of air traffic time series data, so far they prove difficult to apply in a way that provides significant insight or specific identification of traffic patterns.

wavelet analysis↗
NASA NTRSDate not supplied

Exploring Semantic Search Capability of Graph Convolutions Over a Knowledge Graph Built Using Earth Science Corpora

Traditional knowledge graphs tend to be too generic, and often perform poorly on complex scientific queries. Often times, precedence is given to pop culture over scientific knowledge for queries. This is predominantly due to the use of internet sources for building the knowledge graph. With this work, we aim to explore the effectiveness of combining a knowledge graph generated from earth science corpora with a language model and graph convolutions for the purpose of surfacing latent and related sentences given a natural language query. In this model, sentences are conceptualized in the graph as nodes which are connected through entities—words and phrases of interest found in the text—extracted using Google Cloud’s entity extraction model. The language model we used for this is Bidirectional Encoder Representations from Transformers (BERT).The sentences are given a numeric representation by the BERT model. Graph convolutions are then applied to sentence embeddings in order to obtain a vector representation of the sentence as well as the surrounding graph structure, thereby leveraging the power of adjacency inherently encoded in graph structures. With this presentation, we demonstrate the ability of graph convolutions and their improved ability to surface relevant, latent information based on the subject of the input query.

Muthukumaran Ramasubramanian↗
NASA NTRS1993

Resource utilization model for the algorithm to architecture mapping model

The analytical model for resource utilization and the variable node time and conditional node model for the enhanced ATAMM model for a real-time data flow architecture are presented in this research. The Algorithm To Architecture Mapping Model, ATAMM, is a Petri net based graph theoretic model developed at Old Dominion University, and is capable of modeling the execution of large-grained algorithms on a real-time data flow architecture. Using the resource utilization model, the resource envelope may be obtained directly from a given graph and, consequently, the maximum number of required resources may be evaluated. The node timing diagram for one iteration period may be obtained using the analytical resource envelope. The variable node time model, which describes the change in resource requirement for the execution of an algorithm under node time variation, is useful to expand the applicability of the ATAMM model to heterogeneous architectures. The model also describes a method of detecting the presence of resource limited mode and its subsequent prevention. Graphs with conditional nodes are shown to be reduced to equivalent graphs with time varying nodes and, subsequently, may be analyzed using the variable node time model to determine resource requirements. Case studies are performed on three graphs for the illustration of applicability of the analytical theories.

Stoughton, John W.↗
NASA NTRS1993

Fault management for data systems

Issues related to automating the process of fault management (fault diagnosis and response) for data management systems are considered. Substantial benefits are to be gained by successful automation of this process, particularly for large, complex systems. The use of graph-based models to develop a computer assisted fault management system is advocated. The general problem is described and the motivation behind choosing graph-based models over other approaches for developing fault diagnosis computer programs is outlined. Some existing work in the area of graph-based fault diagnosis is reviewed, and a new fault management method which was developed from existing methods is offered. Our method is applied to an automatic telescope system intended as a prototype for future lunar telescope programs. Finally, an application of our method to general data management systems is described.

Boyd, Mark A.↗
NASA NTRS2024

Analyzing EOSDIS Dataset Research Outputs using Knowledge Graphs and Large Language Models

Datasets, unlike publications, can be updated over time, with each new version receiving a DOI but not always being linked to previous ones. This complicates tracking citations across a dataset’s lifecycle. We address this by integrating dataset versions and citations into a knowledge graph (KG), which helps trace dataset citations and analyze dataset usage in applied research. To categorize publications from various journals, we fine-tuned NASA IMPACT INDUS Large Language Model (LLM) on a labeled publication set, assigning publications to one of twenty applied research areas. By linking datasets to these research areas, we improved dataset searchability and discovery through these domains.

open-source↗
NASA NTRS2018

Modeling Principles Using the Relation Between Lagrange Multipliers and Bond Graphs

Final document is attached. Modeling dynamic systems by bond graphs has become state of the art technology since hundreds of researchers around the world have incorporated the technology in many fields of engineering and science. The legacy of its invertor Prof. Henry Paynter at MIT in 1959 is now a fundamental and practical technique to understand reality by building computer models. This paper addresses a particular aspect of this technology when modeling of mechanical systems require relaxation of constraints by means of Lagrange principles. Lagrange's equations are a useful means of describing and solving systems with kinematic constraints. Lagrange multipliers are variables used in equations to find the extremes of multivariate functions. Here we explore the relation of Lagrange multipliers to solve modeling difficulties of a space vehicle with equations with dependent derivatives. Lagrange multipliers were used in conjunction with bond graphs to simulate a system where joints of kinematic linkages produce dependent derivatives. NASA's Morpheus Project lunar lander was used as a case study. The Morpheus Project is a terrestrial test vehicle designed to fly the terminal descent trajectory of a lunar lander to advance the Autonomous Landing Hazard Avoidance Technology (ALHAT). An objective of this study is to apply the modeling approach herein to capture the dynamic movement of the lander as the propellant is sloshed and consumed. This paper expands further the analysis presented by (Granda, J J. Nguyen, L, Carlson, T, Sahragard-Monfared, G., Fornalski, E., Brocker 2016). Using an automated approach bond graph models of state space equations were generated using the Computer Aided Modeling Program (CAMPG). Integral causality models and derivative causality models were considered in order to find the simpler solution for the mathematical dependencies produced in modeling this vehicle.

Granda, Jose J.↗
NASA NTRSDate not supplied

Enhancing Dataset Discovery and Usage Tracking in Earth Sciences: Integrating Knowledge Graphs and Large Language Models

NASA's Data Active Archive Centers (DAACs) have played a crucial role in supporting a wide range of applied research in Earth and Environmental sciences. To date, over 20,000 publications have been collected, citing more than 3,000 NASA Earth science datasets. We present an innovative approach that links datasets and collected publications through a knowledge graph (KG). This KG enables the tracking of dataset citations throughout the dataset's lifecycle, revealing patterns of dataset usage across various applied research areas. We fine-tuned the pre-trained NASA IMPACT INDUS-Base Retriever Large Language Model (LLM) using a set of labeled publication abstracts. Our results indicate that 87% of the publications were classified into one of twenty applied research areas, while the remaining 13% were categorized into non-applied research areas. The classified publications linked to datasets are used to discover datasets by users interested in specific applied research and by dataset providers to determine dataset usage for applications.

open-source↗