Search NASA⌕ Search

SEARCH · Search NASA

Results for “halogen doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Preparation, characterization of the Ta-doped ZnO nanoparticles and their photocatalytic activity under visible-light illumination

This paper describes a novel catalyst of the Ta-doped ZnO nanocrystals prepared by a modified polymerizable complex method using the water-soluble tantalum precursor as the sources of Ta. The catalysts were characterized by means of various analytical techniques as a function of Ta content (x=0-4 mol%) systematically. A remarkable advantage of the results was confirmed that dopant Ta enhanced the visible-light absorption of ZnO and the low-solubility tantalum doping could restrain the growth of crystal and minish the particle size. The relationship between the physicochemical property and the photocatalytic performance was discussed, and it was found that the photocatalytic activity in the photochemical degradation of methylene blue under visible-light irradiation (lambda>=420 nm) was dependent on the contents of the dopant, which could affect the particle size, concentration of surface hydroxyl groups and active hydrogen-related defect sites, and the visible-light absorption. The highest photocatalytic activity was obtained for the 1.0 mol% Ta-doped ZnO sample. - Graphical abstract: The addition of the tantalum into ZnO prepared by a modified polymerizable complex method not only restrains the growth of crystal, minish the particle size, but also changes the nanocrystal morphology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Changes in Phase Composition of NaAlH{sub 4}+FeCl{sub 2} Complex Hydride Exposed to Air

Phase composition in AlNaH{sub 4} doped with FeCl{sub 2} was studied by Moessbauer spectroscopy and X-ray diffraction and stabilities in Ar and air were compared. The results show that the hydride disappeared during the exposition to air. The major sodium alanate hydride traps gaseous impurities and transforms to Na{sub 2}CO{sub 3} and Al(OH){sub 3}.

36 MATERIALS SCIENCE↗

Quenched-in defects in flashlamp-annealed silicon

Deep levels introduced in boron-doped silicon by heat-pulse annealing with a tungsten-halogen flashlamp are investigated using deep-level transient spectroscopy. Two majority-carrier trapping levels in the band gap, at Ev + 0.32 eV and at Ev + 0.45 eV, are observed. These results are compared to those obtained by furnace-quenching and laser-annealing studies. Both the position in the gap and the annealing kinetics of the hole trap at Ev + 0.45 eV suggest that this center is due to an interstitial iron impurity in the lattice. The deep levels are not consistently observed in all flashlamp-annealed Si crystals utilized.

Borenstein, J. T.↗

Sorohalide scintillators, phosphors, and uses thereof

The present invention relates to sorohalide compounds having formula A.sub.3B.sub.2X.sub.9, where A is an alkali metal, B is a rare earth metal, and X is a halogen. Optionally, the sorohalide includes a dopant D. Such undoped and doped sorohalides are useful as scintillation materials or phosphors for any number of uses, including for radiation detectors, solid-state light sources, gamma-ray spectroscopy, medical imaging, and drilling applications.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic activity of co-doped mesoporous TiO{sub 2} on Brij98/CTAB composite surfactant template

Using composite surfactant templates, polyoxyethylene (20) oleyl ether (Brij98) and cetyl trimethyl ammonium bromide (CTAB), as structure-directing agents, N and La co-doped mesoporous TiO{sub 2} complex photocatalysts were synthesized successfully. The micromorphology of co-doped mesoporous TiO{sub 2} samples was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FT-IR), energy-dispersive X-ray spectrometer (EDS) and N{sub 2} adsorption-desorption measurements. The results indicated that the complex photocatalyst prepared with a molar ratio of Brij98:CTAB=1:1 showed a uniform pore size of ca. 7 nm and a high specific surface area (S{sub BET}) of 279.0 m{sup 2} g{sup -1}, and exhibited the highest photocatalytic activity for degradation of papermaking wastewater under ultra-violet light irradiation. The chemical oxygen demand (CODc{sub r}) percent degradation was about 73% in 12 h and chroma percent degradation was 100% in 8 h. - Graphical abstract: CODc{sub r} percent degradation of papermaking wastewater is about 73% after 12 h over the co-doped mesoporous TiO{sub 2} prepared with a molar ratio of Brij98:CTAB=1:1.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photo-degradation of methylene blue using Ta-doped ZnO nanoparticle

A photocatalyst of Ta-doped ZnO was prepared by a modified Pechini-type method. The structural, morphological properties and photocatalytic activity of 1 mol % Ta-doped ZnO samples annealed at different temperatures were characterized. The photo-oxidation of methylene blue under the visible-light irradiation followed the pseudo-first-order kinetics according to the Langmuir-Hinshelwood model. It is found that the photocatalysis of 1% Ta-doped ZnO annealed at 700 {sup o}C showed excellent performance of the photodegradation of methylene blue, which was attributed to a competitive trade-off among the crystallinity, surface hydroxyl groups, and specific surface area. The processing parameter such as the pH value also played an important role in tuning the photocatalytic activity. The maximum photodecomposed rate was achieved at pH=8, and an novel model about the absorption of methylene blue on the surface of the catalysts was proposed. - Graphical abstract: This model describes the adsorption between the amphoteric behavior of the metal oxide and the cationic dye methylene blue (MB) on the surface of the catalyst at the acidic and alkaline condition.

36 MATERIALS SCIENCE↗

Study of PbTe p-Type Doping With BaF{sub 2}

We investigate here the electrical and structural properties of PbTe layers doped with BaF{sub 2}. The layers were grown on (111)BaF{sub 2} substrates by molecular beam epitaxy. The nominal doping level, defined as the beam flux ratio between BaF{sub 2} and PbTe, was varied from 0.02 to 1%. The hole concentration increases monotonously from 5x10{sup 17} to 1x10{sup 19} cm{sup -3} as the doping level is raised from 0.02 to 0.4%, and saturates at p approx10{sup 19} cm{sup -3} for higher doping levels. This result demonstrates that PbTe can be effectively p-type doped with BaF{sub 2}. Even for the highest doping levels, the PbTe layers remained with a good structural quality, as evidenced by the (222) x-ray rocking curves.

36 MATERIALS SCIENCE↗

Chemical sensors using coated or doped carbon nanotube networks

Methods for using modified single wall carbon nanotubes ("SWCNTs") to detect presence and/or concentration of a gas component, such as a halogen (e.g., Cl.sub.2), hydrogen halides (e.g., HCl), a hydrocarbon (e.g., C.sub.nH.sub.2n+2), an alcohol, an aldehyde or a ketone, to which an unmodified SWCNT is substantially non-reactive. In a first embodiment, a connected network of SWCNTs is coated with a selected polymer, such as chlorosulfonated polyethylene, hydroxypropyl cellulose, polystyrene and/or polyvinylalcohol, and change in an electrical parameter or response value (e.g., conductance, current, voltage difference or resistance) of the coated versus uncoated SWCNT networks is analyzed. In a second embodiment, the network is doped with a transition element, such as Pd, Pt, Rh, Ir, Ru, Os and/or Au, and change in an electrical parameter value is again analyzed. The parameter change value depends monotonically, not necessarily linearly, upon concentration of the gas component. Two general algorithms are presented for estimating concentration value(s), or upper or lower concentration bounds on such values, from measured differences of response values.

Li, Jing↗

Synthesis and post-heating treatment of inorganic NaF·Na 3 SbS 4 solid electrolytes

Sulfide-type sodium (Na) solid electrolytes (SEs) with halide doping have attracted serious interest due to their high ionic conductivity and great potential in solid-state Na batteries. While other halogens such as Cl, Br, I have been studied to enhance Na-ion transport in sulfide-type SEs, the introduction of fluorine (F) is rarely investigated. Moreover, synthetic parameters such as heating treatment temperatures strongly influence the structure and conductive properties of halide-doped sulfide SEs. Herein, we prepared xNaF·(1-x)Na 3 SbS 4 nanocomposites with varying concentration of F using a low-temperature (150 °C) heating method, and studied the effects of post-heating treatment on structure and conductivity. In-situ neutron diffraction was employed to investigate the structural evolution of X-doped Na 3 SbS 4 (X = F, Cl) during the post-heating treatment and cooling process. In addition, the post-heating treatment at 300 °C leads to increased ionic conductivity of xNaF·(1-x)Na 3 SbS 4 nanocomposites with various F contents. After 300 °C post-heating treatment, 0.2NaF·0.8Na 3 SbS 4 exhibited the highest conductivity of 0.48 mS cm –1 at room temperature. Moreover, improved electrochemical stability was also observed in Na-Sn symmetric cells, specially, with prolonged stable cycling for 300 h and much lower polarization voltage (<0.35 V). Furthermore, this work highlights the importance of post-heating treatment on the structural evolution and its role in exploring new halide-incorporated sulfide-type SEs, promoting the development of inorganic solid-state ionic conductors.

25 ENERGY STORAGE↗

Heteroatom-Doped Porous Carbon Materials with Unprecedented High Volumetric Capacitive Performance

The design of carbon-based materials with a high mass density and large porosity has always been a challenging goal, since they fulfill the demands of next-generation supercapacitors and other electrochemical devices. We report a new class of high-density heteroatom-doped porous carbon that can be used as an aqueous-based supercapacitor material. The material was synthesized by an in situ dehalogenation reaction between a halogenated conjugated diene and nitrogen-containing nucleophiles. Under the given conditions, pyridinium salts can only continue to perform the dehalogenation if there is residue water remaining from the starting materials. The obtained carbon materials are highly doped by various heteroatoms, leading to high densities, abundant multimodal pores, and an excellent volumetric capacitive performance. Porous carbon tri-doped with nitrogen, phosphorous, and oxygen exhibits a high packing density (2.13 g cm -3 ) and an exceptional volumetric energy density (36.8 Wh L -1 ) in alkaline electrolytes, making it competitive to even some Ni-MH cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transport properties of undoped and Br-doped PbTe sintered at high-temperature and pressure >=4.0 GPa

The thermoelectric properties of nominally undoped PbTe and Br doped PbTe materials sintered at high-pressure and high-temperature (HPHT) have been studied. All samples show n-type semiconducting behavior with negative thermopower. For undoped PbTe, four different HPHT treatments were performed at pressures between 4.0 and 6.5 GPa. PbTe doped with Br at 0.5, 1.0, 2.0, 3.0x10{sup 19} cm{sup -3} was HPHT treated at 4.0 GPa and 1045 deg. C. As the dopant concentration increases, the absolute thermopower decreases, thermal conductivity increases, and electrical resistivity decreases. At a nominal dopant concentration of 1.0x10{sup 19} cm{sup -3}, carrier mobility of 1165 cm{sup 2}/V s and dimensionless thermoelectric figure-of-merit, ZT, of around 0.27 at 300 K were obtained. These results demonstrate that HPHT post-processing is a viable and controllable way of tuning the thermoelectric properties of PbTe-based materials. - Abstract: The effect, on thermoelectric properties, of sintering undoped and Br doped PbTe at pressures >=4.0 GPa and 1045 deg. C are reported and compared with conventionally sintered materials. Display Omitted

36 MATERIALS SCIENCE↗

Origin of the improved photo-catalytic activity of F-doped ZnWO{sub 4}: A quantum mechanical study

Two different mechanisms for improving photo-catalytic activity in different types of F-doped ZnWO{sub 4} are tentatively proposed, based on density function theory calculations. When the lattice O atom is substituted by one F atom, our calculations show that a reduced W{sup 5+} center adjacent to the doped F atom will act as a trap for the photo-induced electron, and will thus result in a reduction of electron-hole recombination and improvement of the photo-catalytic activity. For the interstitial F-doped model, partial F 2p states mixing with O 2p states localize above the top of the valence band and act as the frontier orbital level. Electronic transitions from these localized states induce a red shift of about 54 nm of the optical absorption edge. This work shows that F-doped ZnWO{sub 4} will be a promising photo-catalyst with favorable photo-catalytic activity in the UV region. -- Graphical Abstract: DFT calculations are used to investigate the origin of the improved photo-activity of monoclinic ZnWO{sub 4} induced by the substituted and interstitial F-doping. Two possible mechanisms are tentatively put forward according to the F-doping types. Display Omitted

36 MATERIALS SCIENCE↗

Sorption and desorption properties of a CaH{sub 2}/MgB{sub 2}/CaF{sub 2} reactive hydride composite as potential hydrogen storage material

The hydrogenation behavior of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} composite was studied by manometric measurements, powder X-ray diffraction, differential scanning calorimetry and attenuated total reflection infrared spectroscopy. The maximum observed quantity of hydrogen loaded in the composite was 7.0 wt%. X-ray diffraction showed the formation of Ca(BH{sub 4}){sub 2} and MgH{sub 2} after hydrogenation. The activation energy for the dehydrogenation reaction was evaluated by DSC measurements and turns out to be 162{+-}15 kJ mol{sup -1} H{sub 2}. This value decreases due to cycling to 116{+-}5 kJ mol{sup -1} H{sub 2} for the third dehydrogenation step. A decrease of ca. 25-50 deg. C in dehydrogenation temperature was observed with cycling. Due to its high capacity and reversibility, this composite is a promising candidate as a potential hydrogen storage material. - Graphical abstract: PCI of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} reactive hydride composite at 325 deg. C and 350 deg. C. Open marks: dehydrogenation, closed marks: hydrogenation. Highlights: > The hydrogenation and dehydrogenation behavior of CaF{sub 2} doped CaH{sub 2}/MgB{sub 2} RHC is presented. > The new composite presents a superior hydrogen uptake compared with the non-doped composite.. > A reduction in the E{sub a} and the dehydrogenation temperature was observed by CaF{sub 2} doping and cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Different Profile Responses to Dose Variation for B{sub 2}H{sub 6} and BF{sub 3} Plasma Doping using PULSION registered

Plasma doping has been accepted into semiconductor manufacturing for two low energy, high dose implant applications. The p-type polysilicon counter-doping and contact doping for DRAM devices can be carried out using BF{sub 3} or B{sub 2}H{sub 6} precursor gas. The choice between these two precursors depends on the benefits and constraints of each one. In order to identify these benefits and constraints, the boron dopant profile responses to dose variation for both precursors have been studied using the PULSION plasma doping tool.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coated or doped carbon nanotube network sensors as affected by environmental parameters

Methods for using modified single wall carbon nanotubes ("SWCNTs") to detect presence and/or concentration of a gas component, such as a halogen (e.g., Cl.sub.2), hydrogen halides (e.g., HCl), a hydrocarbon (e.g., C.sub.nH.sub.2n+2), an alcohol, an aldehyde or a ketone, to which an unmodified SWCNT is substantially non-reactive. In a first embodiment, a connected network of SWCNTs is coated with a selected polymer, such as chlorosulfonated polyethylene, hydroxypropyl cellulose, polystyrene and/or polyvinylalcohol, and change in an electrical parameter or response value (e.g., conductance, current, voltage difference or resistance) of the coated versus uncoated SWCNT networks is analyzed. In a second embodiment, the network is doped with a transition element, such as Pd, Pt, Rh, Ir, Ru, Os and/or Au, and change in an electrical parameter value is again analyzed. The parameter change value depends monotonically, not necessarily linearly, upon concentration of the gas component. Two general algorithms are presented for estimating concentration value(s), or upper or lower concentration bounds on such values, from measured differences of response values.

Li, Jing↗

Energy and charge transfers between (Bu{sub 4}N){sub 2}(Ru)(dcbpyH){sub 2}(NCS){sub 2} (N719) and ZnO thin films

ZnO thin films and (Bu{sub 4}N){sub 2}(Ru)(dcbpyH){sub 2}(NCS){sub 2} (called N719) sensitized ZnO thin films are grown on fluorine-doped tin oxide (FTO) conducting glass substrates using laser molecular beam epitaxy. Ultraviolet-visible absorption, photoluminescence (PL), surface photovoltage spectroscopy, and Raman scattering are employed to probe into the transition process of photogenerated charges and the interaction between ZnO and N719. The experimental results indicate that there is a significant electronic interaction between N719 and ZnO through chemiadsorption. The interaction greatly enhances the photogenerated charge separation and thus the photovoltaic response of the ZnO film but remarkedly weakens its radiative recombination, i.e., PL, implying strong energy and charge transfer occurring between N719 and ZnO. In addition, a new PL peak observed at about 720 nm in N719 sensitized ZnO/FTO is attributed to the electron-hole recombination of N719.

36 MATERIALS SCIENCE↗

Effect of Magnesium Doping on Structural and Optical Properties of ZnO Nanoparticles Synthesized by Mechanochemical Processing

This paper presents the structural and optical properties of magnesium doped zinc oxide nanoparticles synthesized by mechanochemical processing. ZnO nanoparticles of different crystallite size were synthesized by milling the precursor materials for 5 h in a high energy planetary ball mill in Zr{sub 2}O{sub 3} media. NaCl was added as diluent to control the reaction rate in order to avoid the growth of nanoparticles. The milled powders were heat treated at 600 deg. C and then NaCl was leached out using distilled water. X-ray Diffraction (XRD) technique was employed for the phase and crystallite size analysis of the nanoparticles. Crystallite sizes were calculated from the XRD peak broadening using the Sherrer's formula. Scanning Electron Microscope was employed to analyze the particle morphology and size distribution of the Mg doped ZnO nanoparticles. Ultraviolet-Visible (Uv-Vis) spectroscope also was employed to analyze the optical absorption of the ZnO nano particles. Tauc plots were used to determine the energy gap of the nanoparticles samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polyol-mediated solvothermal synthesis and luminescence properties of CeF{sub 3}, and CeF{sub 3}:Tb{sup 3+} nanocrystals

CeF{sub 3} and CeF{sub 3}:Tb{sup 3+} nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH{sub 4}F and reactant concentrations were key factors in the product shape and size. Excessive NH{sub 4}F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH{sub 4}F content and reactant concentrations. In addition, Tb{sup 3+} doped-CeF{sub 3} sample shows strong green emission centered at 544 nm corresponding to the {sup 5}D{sub 4}-{sup 7}F{sub 5} transition of Tb{sup 3+}. Due to the decrease of nonradiative decay rate, the lifetime of {sup 5}D{sub 4} level of Tb{sup 3+} become longer gradually upon increasing the size of product. -- Graphical abstract: 0D nanoparticles and 2D nanoplates CeF{sub 3} and CeF{sub 3}:Tb{sup 3+} have been successfully fabricated through a facile polyol process. Display Omitted Research highlights: {yields} 0D nanoparticles and 2D nanoplates CeF{sub 3} were fabricated by polyol process. {yields} Morphology of product depends on the content of NH{sub 4}F and reactant concentrations. {yields} CeF{sub 3}:Tb{sup 3+} shows strong green emission via Ce{sup 3+}-Tb{sup 3+} energy transfer route. {yields} Decay process of {sup 5}D{sub 4} level of Tb{sup 3+} tends to slower increasing the size of products.

36 MATERIALS SCIENCE↗