Search NASA⌕ Search

SEARCH · Search NASA

Results for “heterogeneous doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Competing conduction mechanisms in high performance carbon nanotube fibers

The performance of carbon nanotube (CNT) cables, a contender for copper-wire replacement, is tied to its metallic and semi-conducting-like conductivity responses with temperature; the origin of the semi-conducting-like response however is an underappreciated incongruity in literature. With controlled aspect-ratio and doping-degree, over 61 unique cryogenic experiments including anisotropy and Hall measurements, CNT cable performance is explored at extreme temperatures (65 mK) and magnetic-fields (60 T). A semi-conducting-like conductivity response with temperature becomes temperature-independent approaching absolute-zero, uniquely demonstrating for the first time the necessity of heterogeneous fluctuation induced tunneling; complete de-doping leads to localized hopping, contrasting graphite's pure metallic-like response. High-field magneto-resistance (including novel +22 % longitudinal magneto-resistance near room-temperature) is analyzed with hopping and classical two-band models, both yielding a similar parameter useful for conductor development. Varying field-orientation angle uncovers significant two- and four-fold symmetries that are shown to be from Aharonov-Bohm-like corrections to the curvature-induced bandgap, a first for macroscale CNT fibers. Tight-binding calculations using Green's Function formalism model the largest, coherent transport to-date in commensurate CNT bundles in magnetic-field, revealing non-uniform transmission across bundle cross-sections with doping restoring uniformity; independent of doping, transport in bundle-junction-bundle systems are predominantly from CNTs adjacent to the other bundle—demonstrating that smaller bundles are more efficient for electronic transport. The final impact is predicting the ultimate conductivity of heterogeneous CNT cables using temperature and field-dependent transport, surpassing conductivity of traditional metals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spatial Control of Substitutional Dopants in Hexagonal Monolayer WS 2 : The Effect of Edge Termination

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution remains an open field. In this work, edge termination is demonstrated as an important characteristic of 2D TMD monocrystals that affects the distribution of substitutional dopants. Particularly, in chemical vapor deposition (CVD)-grown monolayer WS 2 , it is found that a higher density of transition metal dopants is always incorporated in sulfur-terminated domains when compared to tungsten-terminated domains. Here two representative examples demonstrate this spatial distribution control, including hexagonal iron- and vanadium-doped WS 2 monolayers. Density functional theory (DFT) calculations are further performed, indicating that the edge-dependent dopant distribution is due to a strong binding of tungsten atoms at tungsten-zigzag edges, resulting in the formation of open sites at sulfur-zigzag edges that enable preferential dopant incorporation. Based on these results, it is envisioned that edge termination in crystalline TMD monolayers can be utilized as a novel and effective knob for engineering the spatial distribution of substitutional dopants, leading to in-plane hetero-/multi-junctions that display fascinating electronic, optoelectronic, and magnetic properties.

2D transition metal dichalcogenides↗
DOE OSTI2022

Alkaline Modified Solid Oxide Catalysts for Condensation Reactions between Biomolecules

The coupling of oxygenates derived from biomass is critical to the production of sustainable commodity chemicals. However, most current industrial oxygenate condensation processes rely on highly corrosive homogenous basic catalysts. To find greener alternatives, several condensation reactions were screened using a variety of alkaline-doped MgO and MgO-Al2O3 heterogenous catalysts. These include i) the self-condensation of hexanedione to methylcyclopentenone, ii) the self-condensation of methyl ethyl ketone to form C8 or C12 ketones, and iii) the coupling of dimethyl succinate and benzaldehyde. We demonstrate substantial yields for several condensation reactions that typically require homogenous base catalysts

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nanoscale inhomogeneity of charge density waves dynamics in La 2-x Sr x NiO 4

While stripe phases with broken rotational symmetry of charge density are known to emerge in doped strongly correlated perovskites, the dynamics and heterogeneity of spatial ordering remain elusive. Here we shed light on the temperature dependent lattice motion and the spatial nanoscale phase separation of charge density wave order in the archetypal striped phase in La 2-x Sr x NiO 4+y (LSNO) perovskite using X-ray photon correlation spectroscopy (XPCS) joint with scanning micro X-ray diffraction (SµXRD). While it is known that the CDW in 1/8 doped cuprates shows a remarkable stability we report the CDW motion dynamics by XPCS in nickelates with an anomalous quantum glass regime at low temperature, T < 65 K, and the expected thermal melting at higher temperature 65 < T < 120 K. The nanoscale CDW puddles with a shorter correlation length are more mobile than CDW puddles with a longer correlation length. The direct imaging of nanoscale spatial inhomogeneity of CDW by scanning micro X-ray diffraction (SµXRD) shows a nanoscale landscape of percolating short range dynamic CDW puddles competing with large quasi-static CDW puddles giving rise to a novel form of nanoscale phase separation of the incommensurate stripes order landscape.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synergistic Evolution of Segmental Motion and Cooperative Relaxation within the Amorphous Phase of Organic Mixed Ionic-Electronic Conductors

Organic mixed ionic-electronic conductors (OMIECs) facilitate a variety of electrochemical processes and feature a heterogeneous microstructure composed of both crystalline and amorphous phases. However, structural evolution in amorphous regions during electrochemical doping remains poorly understood, limiting our understanding of mixed conduction mechanisms. Here, in this work, we develop operando chip calorimetry to probe amorphous phase evolution in poly­(3,4-ethylenedioxythiophene):poly­(styrenesulfonate) (PEDOT:PSS) under swelling and electrochemical (de)­doping. Our results reveal that amorphous regions providing ionic transport pathways and those within electronic transport channels undergo heterogeneous, yet synergistic, evolution during electrochemical modulation. The cooperative interplay between segmental motion and relaxation maintains ionic conductivity and intergrain electronic transport upon electrowetting and doping, while facilitating efficient ion hopping and adaptable chain conformations during dedoping. Such synergies are more pronounced in loose structures featuring a fibrillar morphology, which exhibit lower glass transition temperatures (T g ) and higher fragility (m). High-throughput robotic screening further establishes a strong correlation between elevated m/T g ratios and enhanced mixed conduction. These findings elucidate the role of the amorphous phase in the synthesis of OMIECs and underscore the potential of operando chip calorimetry in uncovering structure–property relationships in electroactive polymers.

amorphous phase↗
NASA NTRS1996

Effect of Pt Doping on Nucleation and Crystallization in Li2O.2SiO2 Glass: Experimental Measurements and Computer Modeling

Heterogeneous nucleation and its effects on the crystallization of lithium disilicate glass containing small amounts of Pt are investigated. Measurements of the nucleation frequencies and induction times with and without Pt are shown to be consistent with predictions based on the classical nucleation theory. A realistic computer model for the transformation is presented. Computed differential thermal analysis data (such as crystallization rates as a function of time and temperature) are shown to be in good agreement with experimental results. This modeling provides a new, more quantitative method for analyzing calorimetric data.

Narayan, K. Lakshmi↗
DOE OSTI2021

Impact of Transition Metal Doping on the Structural and Optical Properties of Halide Perovskites

Metal ion doping into halide perovskite materials is a promising approach to enhance long-term film stability and improve solar cell performance. Moreover, the idea of doping metals into halide perovskites is also driven by applications in heterogeneous catalysis. Here, we investigate the incorporation of the transition metals Pt and Pd into mixed-halide perovskite materials. We find that Pt aggregates in large clusters in iodine- and bromine-rich perovskite film compositions, whereas Pd incorporation depends on the underlying bromine to iodine ratio. Furthermore, by using optical and structural characterization methods, we observe that phase segregation in the perovskite layer is suppressed upon doping of either of these metals into the material. This approach further shows the potential to obtain catalytically active halide perovskite films in which the perovskite can serve as a host matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Microfluidic, One-Batch Synthesis of Pd Nanocrystals on N-Doped Carbon in Surfactant-Free Deep Eutectic Solvents for Formic Acid Electrochemical Oxidation

One of the grand challenges that impedes practical applications of nanomaterials is the lack of robust manufacturing methods that are scalable, cheap, and environmentally friendly. In this work, we address this challenge by developing a microfluidic approach that produces surfactant-free Pd nanocrystals (NCs) uniformly loaded on N-doped porous carbon in a one-batch process. The deep eutectic solvent (DES) prepared from choline chloride and ethylene glycol was employed as a novel synthesis solvent, and its extended hydrogen networks and abundant ionic species effectively stabilize Pd facets and confine nanocrystal sizes without using surfactants. The microreactors provide faster heat exchange and more uniform mass transport, which in combination with DES produced Pd NCs with better-defined shape and predominately exposed Pd (100) facet. Furthermore, we describe that the N-doped functional groups in porous carbon direct dense and uniform heterogeneous growth of Pd NCs in a one-batch process, thereby eliminating a separate catalyst deposition step that is often involved in conventional synthesis. The Pd NCs in the one-batch-produced Pd/C catalysts exhibited a size distribution of similar to ~13 ± 3.5 nm and a high ESCA of 46.0 m 2 /g and delivered 362 mA/mg for formic acid electrochemical oxidation with improved stability, demonstrating the unique potentials of microfluidic reactors and DES for the controllable and scalable synthesis of electrocatalyst materials for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nanoscale heterogeneity induced by nonmagnetic Zn dopants in the quantum critical metal CeCoIn 5 : 115 In NQR/NMR and 59 Co NMR study

We report antiferromagnetism in a prototypical quantum critical metal CeCoIn 5 is known to be induced by slight substitutions of nonmagnetic Zn atoms for In. In nominally 7% Zn-substituted CeCoIn 5 , an antiferromagnetic (AFM) state coexists with heavy fermion superconductivity. Heterogeneity of the electronic states is investigated in Zn-doped CeCoIn 5 by means of nuclear quadrupole and magnetic resonances (NQR and NMR). Site-dependent NQR relaxation rates 1/T 1 indicate that the AFM state is locally nucleated around Zn substituents in the matrix of a heavy fermion state, and percolates through the bulk at the AFM transition temperature T N . At lower temperatures, an anisotropic superconducting (SC) gap below the SC transition temperature Tc, and the SC state permeates through the AFM regions via a SC proximity effect. Applying an external magnetic field induces a spin-flop transition near 5T, reducing the volume of the AFM regions. Consequently, a short-ranged inhomogeneous AFM state survives and coexists with a paramagnetic Fermi liquid state at high fields.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In situ high-temperature X-ray diffraction study of Sc-doped titanium oxide nanocrystallites

Titanium dioxide is an inexpensive wide-gap highly ionic semiconductor with striking photocatalytic capabilities in several heterogeneous photoredox reactions. A small crystal size is desirable to maximize the surface area, since photocatalytic reactions occur at the surface of a photocatalyst. Presented in this work are the synthesis and microstructural characterization of 4 at.% Sc-doped TiO 2 (4SDT) prepared by water-based co-precipitation. The crystal structure of 4SDT was examined via in situ high-temperature powder X-ray diffraction experiments from 25 to 1200°C. Rietveld analysis revealed single-phase anatase up to 875°C, while at 900°C the anatase-to-rutile phase transformation occurred and at higher temperatures additional reflections of Sc-rich phases (Sc 2 TiO 5 from 975°C and Ti 3 Sc 4 O 12 or Sc 2 O 3 at 1200°C) were observed. Debye function analysis (DFA) was applied to model the total scattering pattern directly in reciprocal space, allowing the reconstruction of Ti vacancies. Both Rietveld and DFA methods were applied to estimate the nanocrystallite size and shape with consistent growth in crystallite size with temperature: an ellipsoid shape with equatorial ~4.7 nm / axial (001) ~6.9 nm at 25°C to equatorial ~27.9 nm / axial (001) ~39.6 nm at 900°C refined by Rietveld analysis, versus a cylinder shape with D a , b = 4.3 nm and size dispersion σ ab = 1.5 nm, L c = 4.9 nm and σ c = 2.3 nm at 25°C to D a , b = 21.4 nm, σ ab = 8.3 nm, L c = 23.9 and σ c = 10.9 nm at 900°C estimated by DFA. The microstructural changes obtained by Rietveld and DFA methods were supported by high-resolution transmission electron microscopy image analysis, as well as by the less direct nitrogen sorption techniques that provide information on the size of non-agglomerated and dense particles. The Ti site-occupancy factor showed a linear increase from 0.6–0.8 at 25°C to unity at 900°C for anatase, and from ~0.7 at 900°C to unity at 1200°C for rutile, via Rietveld analysis and DFA.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fungal organic acid uptake of mineral-derived K is dependent on distance from carbon hotspot

Fungal mineral weathering regulates the bioavailability of inorganic nutrients from mineral surfaces to organic matter and increase the bioavailable fraction of nutrients. Such weathering strategies are classified as biomechanical or biochemical. In the case of fungal uptake of mineral nutrients through biochemical weathering, it is widely hypothesized that uptake of inorganic nutrients occurs through organic acid chelation, but such processes have not been directly visualized. This is in part due to challenges in probing the complex and heterogeneous soil environment. Here, using an epoxy-based, mineral-doped soil micromodel platform, which emulates soil mineralogy and porosity, we visualize the molecular mechanisms of mineral weathering. Mass spectrometry imaging revealed differences in the distribution of fungal exudates, citric acid, and tartaric acid on the soil micromodels in presence of minerals. Citric acid was detected closer to the nutrient-rich inoculation point, whereas tartaric acid was highly abundant away from inoculation point. This suggested that the organic acid exuded by the fungi depended on the proximity from the carbon-rich organic substrate at the point of inoculation. Using a combination of X-ray fluorescence and X-ray near edge structure analysis, we identified citric acid- and tartaric acid-bound K within fungal hyphae networks grown in the presence of minerals. Combined, our results provide direct evidence that fungi uptake and transport mineral derived nutrient organic acid chelation. The results of this study provided unprecedented visualization of fungal uptake and transport of K + , while resolving the indirect weathering mechanism of fungal K uptake from mineral interfaces.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Zero-Strain Metal-Insulator Transition by the Local Fluctuation of Cation Dimerization

The coupled electronic and structural transitions in metal-insulator transition (MIT) hinder ultrafast switching and ultimate endurance. Decoupling these transitions and achieving a zero-strain electronic MIT can overcome the fundamental limitations of MIT in solid materials. Here, this study demonstrates that iso-valent Ti dopants in supercooled VO 2 epitaxial films cause MIT with minimal hysteresis without changing unit-cell volume and crystal symmetry. The Ti dopants in the VO 2 lattice locally alter the configuration of V-V pairs, where the long-range ordering in V-V pairs is disrupted, and the nano-domains of V-V dimers are formed. Strikingly, these local V-V dimers persist even above the electronic transition temperature (T MI ), facilitating the zero-strain electronic MIT with nanoscale structural heterogeneity. The geometrically compatible interface between insulating and metallic phases drastically enhances switching speed and endurance during electrically and optically driven zero-strain MIT. In conclusion, this discovery offers a fresh perspective on the scientific understanding of MIT and the improved functionality in terms of device speed and reliability by decoupling electronic and structural transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanistic study of direct coupling of CO 2 and C 2 H 4 over atomically dispersed metal at graphene edges

Direct coupling of CO 2 and ethylene (hereinafter DCCE) to acrylic acid is valuable for valorizing CO 2 to manufacture acrylate-derived products. However, previous studies in DCCE have been limited on molecular catalysts with challenges in improving catalytic performance. In this work, we employed density functional theory calculations and ab initio molecular dynamics simulations to investigate the heterogeneous catalysis of DCCE over atomically dispersed metal centers at nitrogen-doped zigzag edge of graphene. Based on competitive adsorption and structural stability, Mo, Cr, V, Ru, and Ni active sites are chosen to explore the reaction kinetics. Here, we find that the activation barriers are determined by the charge redistribution at transition states, which explains the trend of activity for the C-C coupling and the hydrogen transfer, two key steps in DCCE. Furthermore, we show that the intramolecular hydrogen transfer (rate-limiting step) is hindered due to the lack of local coordinate at the active sites. We thus propose to use co-adsorbed water as a “proton-exchanger” following a water-assisted route, and show that the activation barriers are reduced over all metal centers. Particularly, water promotes the hydrogen transfer over metals with strong CO 2 -ethylene co-activation and facile C-C coupling kinetics, which could be considered promising for DCCE. In both mechanisms, the stability of metallactone intermediate can be used to predict the catalytic activity. It is anticipated that the insights from this work can provide guidelines for mimicking well-defined multifunctional active sites in molecular catalysts to design heterogeneous catalysts for such C-C coupling, which advances catalytic utilization of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning hydrogenation chemistry of Pd-based heterogeneous catalysts by introducing homogeneous-like ligands

Abstract Noble metals have been extensively employed in a variety of hydrotreating catalyst systems for their featured functionality of hydrogen activation but may also bring side reactions such as undesired deep hydrogenation. It is crucial to develop a viable approach to selectively inhibit side reactions while preserving beneficial functionalities. Herein, we present modifying Pd with alkenyl-type ligands that forms homogeneous-like Pd-alkene metallacycle structure on the heterogeneous Pd catalyst to achieve the selective hydrogenolysis and hydrogenation. Particularly, a doped alkenyl-type carbon ligand on Pd-Fe catalyst is demonstrated to donate electrons to Pd, creating an electron-rich environment that elongates the distance and weakens the electronic interaction between Pd and unsaturated C of the reactants/products to control the hydrogenation chemistry. Moreover, high H 2 activation capability is maintained over Pd and the activated H is transferred to Fe to facilitate C-O bond cleavage or directly participate in the reaction on Pd. The modified Pd-Fe catalyst displays comparable C-O bond cleavage rate but much higher selectivity (>90%) than the bare Pd-Fe (<50%) in hydrotreating of diphenyl ether (DPE, modelling the strongest C-O linkage in lignin) and enhanced ethene selectivity (>90%) in acetylene hydrogenation. This work sheds light on the controlled synthesis of selective hydrotreating catalysts via mimicking homogeneous analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Heterogeneous Fe-N-C Catalyst for Aerobic Dehydrogenation of Hydrazones to Diazo Compounds Used for Carbene Transfer

Organic diazo compounds are versatile reagents in chemical synthesis and would benefit from improved synthetic accessibility, especially for larger scale applications. Here, we report a mild method for the synthesis of diazo compounds from hydrazones using a heterogeneous Fe-N-C catalyst, which has Fe ions dispersed within a graphitic nitrogen-doped carbon support. The reactions proceed readily at room temperature using O 2 (1 atm) as the oxidant. Aryl diazoesters, ketones, and amides are accessible, in addition to less stable diaryl diazo compounds. Initial-rate data show that the Fe-N-C catalyst achieves faster rates than a heterogeneous Pt/C catalyst. The oxidative dehydrogenation of hydrazones may be performed in tandem with Rh-catalyzed enantioselective C–H insertion and cyclopropanation of alkenes, without requiring isolation of the diazo intermediate. Furthermore, this sequence is showcased by using a flow reactor for continuous synthesis of diazo compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparing Experimental Phase Behavior of Ion-Doped Block Copolymers with Theoretical Predictions Based on Selective Ion Solvation

The effects of salt-doping on the morphological behavior of block copolymers are well established but remain poorly understood, partially because of the challenge of resolving electrostatics in a heterogeneous medium with low average permittivity. By employing a recently developed field theory, we analyze the phase behavior of polystyrene-b-poly(ethylene oxide) (SEO) copolymers doped with lithium bis(trifluoromethanesulfonyl)imide salts (LiTFSI). Using a single fitting parameter, the ionic solvation radius, we obtain qualitative agreement between our theory and experimental data over a range of polymer molecular weights and copolymer compositions. Such agreement supports and highlights the need of solvation free energy to accurately describe the self-assembly of ion-doped block copolymers and demonstrates that experimentally observed dependence on molecular weight, not present in neutral block copolymers, can be rationalized by solvation effects. Overall, morphological variations are stronger than those predicted by the leading, linear order theory but can be captured by the full model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heterogeneous M-N-C Catalysts for Aerobic Oxidation Reactions: Lessons from Oxygen Reduction Electrocatalysts

Nonprecious metal heterogeneous catalysts composed of first-row transition metals incorporated into nitrogen-doped carbon matrices (M-N-Cs) have been studied for decades as leading alternatives to Pt for the electrocatalytic O 2 reduction reaction (ORR). More recently, similar M-N-C catalysts have been shown to catalyze the aerobic oxidation of organic molecules. Here, this Focus Review highlights mechanistic similarities and distinctions between these two reaction classes and then surveys the aerobic oxidation reactions catalyzed by M-N-Cs. As the active-site structures and kinetic properties of M-N-C aerobic oxidation catalysts have not been extensively studied, the array of tools and methods used to characterize ORR catalysts are presented with the goal of supporting further advances in the field of aerobic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tuning Exciton Emission via Ferroelectric Polarization at a Heterogeneous Interface between a Monolayer Transition Metal Dichalcogenide and a Perovskite Oxide Membrane

Here we demonstrate the integration of a thin BaTiO 3 (BTO) membrane with monolayer MoSe 2 in a dual gate device that enables in-situ manipulation of the BTO ferroelectric polarization with a voltage pulse. While two-dimensional (2D) transition metal dichalcogenides (TMDs) offer remarkable adaptability, their hybrid integration with other families of functional materials beyond the realm of 2D materials has been challenging. Released functional oxide membranes offer a solution for 2D/3D integration via stacking. 2D TMD excitons can serve as a local probe of the ferroelectric polarization in BTO at a heterogeneous interface. Using photoluminescence (PL) of MoSe 2 excitons to optically readout the doping level, we find that the relative population of charge carriers in MoSe 2 depends sensitively on the ferroelectric polarization. This finding points to a promising avenue for future-generations versatile sensing devices with high sensitivity, fast read-out, and diverse applicability for advanced signal processing.

42 ENGINEERING↗