Platinum@Hexaniobate Nanopeapods: A Directed Photocatalytic Architecture for Dye-Sensitized Semiconductor H 2 Production under Visible Light Irradiation
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “heterogeneous photocatalysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Intraligand Charge Transfer Enables Visible‐Light‐Mediated Nickel‐Catalyzed Cross‐Coupling Reactions**
Abstract We demonstrate that several visible‐light‐mediated carbon−heteroatom cross‐coupling reactions can be carried out using a photoactive Ni II precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl 2 ). The activation of this precatalyst towards cross‐coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light‐responsive nickel complexes that undergo metal‐to‐ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl 2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross‐coupling reactions. The heterogeneous catalyst shows stable performance in a packed‐bed flow reactor during a week of continuous operation.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Influence of Linker Identity on the Photochemistry of Uranyl-Organic Frameworks
While uranyl-based metal–organic frameworks (MOFs) boast impressive photocatalytic abilities, significant questions remain regarding their excitation pathways and methods to fine-tune their performance due to the lack of information regarding heterogeneous uranyl catalysis. Herein, we investigated how linker identity and photoexcitation impact uranyl photocatalysis when the uranyl coordination environment remains constant. Toward this end, we prepared three uranyl-based MOFs (NU-1301, NU-1307, and ZnTCPP-U2) and then examined the structural and photochemical properties of each through X-ray diffraction, X-ray absorption, and photoluminescence. We then correlated our observations to the photocatalytic performance for fluorination of cyclooctane. The excitation profile from NU-1301 and NU-1307 exhibited spin-forbidden linker transitions and uranyl vibronic progressions, with uranyl excitation and emission being most dominant in NU-1301. Consequently, NU-1301 was a more active photocatalyst than NU-1307. In contrast, the excitation profile from ZnTCPP-U2 contained transitions associated with the porphyrin linker exclusively. Photocatalytic activity from ZnTCPP-U2 significantly underperformed in comparison to that of the other two MOFs. Furthermore, these data suggest that linkers’ photophysical properties can be used to predict the photocatalytic behavior of uranyl-containing MOFs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Nanoscale Spatial Distribution of Supported Nanoparticles Controls Activity and Stability in Powder Catalysts for CO Oxidation and Photocatalytic H 2 Evolution
Here we discuss, supported metal nanoparticles are essential components of high-performing catalysts, and their structures are intensely researched. In comparison, nanoparticle spatial distribution in powder catalysts is conventionally not quantified, and the influence of this collective property on catalyst performance remains poorly investigated. Here, we demonstrate a general colloidal self-assembly method to control uniformity of nanoparticle spatial distribution on common industrial powder supports. We quantify distributions on the nanoscale using image statistics and show that the type of nanospatial distribution determines not only the stability, but also the activity of heterogeneous catalysts. Widely investigated systems (Au–TiO 2 for CO oxidation thermocatalysis and Pd–TiO 2 for H 2 evolution photocatalysis) were used to showcase the universal importance of nanoparticle spatial organization. Spatially and temporally resolved microkinetic modeling revealed that nonuniformly distributed Au nanoparticles suffer from local depletion of surface oxygen, and therefore lower CO oxidation activity, as compared to uniformly distributed nanoparticles. Nanoparticle spatial distribution also determines the stability of Pd–TiO 2 photocatalysts, because nonuniformly distributed nanoparticles sinter while uniformly distributed nanoparticles do not. This work introduces new tools to evaluate and understand catalyst collective (ensemble) properties in powder catalysts, which thereby pave the way to more active and stable heterogeneous catalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Feasibility of Ultraviolet Light Emitting Diodes as an Alternative Light Source for Photocatalysis
The objective of this study was to determine whether ultraviolet light emitting diodes (UV-LEDs) could serve as an alternative photon source efficiently for heterogeneous photocatalytic oxidation (PCO). An LED module consisting of 12 high-power UV-A LEDs was designed to be interchangeable with a UV-A fluorescent black light blue (BLB) lamp in a Silica-Titania Composite (STC) packed bed annular reactor. Lighting and thermal properties were characterized to assess the uniformity and total irradiant output. A forward current of (I(sub F)) 100 mA delivered an average irradiance of 4.0 m W cm(exp -2), which is equivalent to the maximum output of the BLB, but the irradiance of the LED module was less uniform than that of the BLB. The LED- and BLB-reactors were tested for the oxidization of 50 ppmv ethanol in a continuous flow-through mode with 0.94 sec space time. At the same irradiance, the UV-A LED reactor resulted in a lower PCO rate constant than the UV-A BLB reactor (19.8 vs. 28.6 nM CO2 sec-I), and consequently lower ethanol removal (80% vs. 91%) and mineralization efficiency (28% vs. 44%). Ethanol mineralization increased in direct proportion to the irradiance at the catalyst surface. This result suggests that reduced ethanol mineralization in the LED- reactor could be traced to uneven irradiance over the photocatalyst, leaving a portion of the catalyst was under-irradiated. The potential of UV-A LEDs may be fully realized by optimizing the light distribution over the catalyst and utilizing their instantaneous "on" and "off' feature for periodic irradiation. Nevertheless, the current UV-A LED module had the same wall plug efficiency (WPE) of 13% as that of the UV-A BLB. These results demonstrated that UV-A LEDs are a viable photon source both in terms of WPE and PCO efficiency.
Levine, Langanf H.↗
Shell Thickness and Heterogeneity Dependence of Triplet Energy Transfer between Core–Shell Quantum Dots and Adsorbed Molecules
Quantum dot (QD)-sensitized triplet energy transfer (TET) has found promising applications in photon upconversion and photocatalysis. However, the underlying mechanism of TET in the QD-acceptor complex remains unclear despite the well-developed TET theory for the molecular donor–acceptor systems. Herein, the coupling strength of TET from CdSe/CdS core–shell QDs to 9-anthracene carboxylic acid (ACA) was studied by measuring the TET rate as a function of shell thickness with time-resolved photoluminescence. The change of TET-coupling strength with increasing shell thickness was further compared to those of electron and hole transfers from QDs so that we could test whether QD-sensitized TET is mediated by the charge transfer virtual state and can be considered as simultaneous electron and hole transfers as in molecular donor–acceptor systems. The measured coupling strength of TET from the CdSe/CdS QD decreases exponentially with the CdS shell thickness r: |V|(r) = |V|(0)e –βr , with an exponential decay factor β of 0.19 Å –1 , which is smaller than the sum of the measured decay factors for electron transfer to methyl viologen (0.18 Å –1 ) and hole transfer to phenothiazine (0.29 Å –1 ) from the same QD. This inconsistency is explained by the broadening of QD shell thicknesses in the distance dependence study, which significantly modifies the TET-coupling strength and driving force, resulting in a shallower distance dependence of the TET rate constants. This study sheds light on the fundamental mechanisms of QD-sensitized TET reactions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Application of machine learning interatomic potentials in heterogeneous catalysis
Heterogeneous catalysts are crucial in modern societies as they promote sustainability by enabling lower-energy pathways for various chemical reactions. While Density Functional Theory (DFT) computations can provide critical insights into how heterogeneous catalysts operate at the atomic level, they are limited by computational costs and unfavorable scaling with system size. Recently, machine learning interatomic potentials (MLIPs) have emerged as a promising alternative to DFT, offering near-DFT accuracy at significantly reduced cost. Here, in this perspective, we discuss the application of MLIPs in heterogeneous catalyst modeling as a surrogate for DFT. We detail how MLIPs have been applied in thermal catalysis to probe active sites, enable studying complex metallic and nanoporous catalysts, and investigate the reconstruction of catalytic surfaces. We review the use of MLIPs in electrocatalysis and photocatalysis, emphasizing their capabilities in studying transition metal oxide surfaces and solid–liquid interfaces. We also discuss the current limitations of MLIPs, particularly their challenges with transferability and description of non-local interactions. Finally, we conclude by identifying promising and underexplored domains in which MLIPs can further advance our understanding of heterogeneous catalysts.
Catalytic surfaces↗
Spin-selective photocatalysis and quantum transport using ab initio density-matrix dynamics
The overarching goal of this research program is to quantitatively predict out-of-equilibrium quantum dynamics and transport with electrons and spin degrees of freedom coupled to phonons, photons, defects and liquid environments, specifically targeting spin-selective chemistry. Spin polarized carriers, which can be generated at room temperature by circularly-polarized light, provide unique opportunities for creating new reaction pathways and increasing selectivity towards specific pathways. If realized, this can substantially increase the level of reaction control possible in the field of heterogeneous catalysis. Spin, a quantum mechanical entity without a classical counterpart, requires quantum dynamics. Capturing both coherent and incoherent dynamics and accurate correlation of spins, electrons and phonon environments are essential to quantitative description of generation, relaxation and transport, as well as chemical reaction of spin-polarized carriers in molecules and materials promising for spin-photocatalysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Introduction to (Photo)electrocatalysis For Renewable Energy
Humanity is facing a significant and growing energy demand, necessitating a new energy paradigm built on clean and abundant renewable energy.1 Within this context, electrocatalysis and (photo)electrocatalysis hold great promise for enabling renewable energies such as solar and wind power to overcome the transient nature of their energy output.2-6 Developing catalysts that operate efficiently and selectively, and that are also robust, has been the focus of much research. This special issue brings together the latest advances in the fundamental and applied science addressing the synthesis, characterization, mechanisms, and performance of (photo)electrocatalysts for energy storage and conversion of small molecules into useful specialty and commodity chemicals and fuels. The electrocatalysts and (photo)electrocatalysts highlighted in this issue include metalloenzymes, homogeneous and supported molecular catalysts, and diverse heterogeneous nanoparticulate and thin film systems. The reports span across basic and applied studies and encompass both experimental and theoretical investigations.
Dey, Abhishek↗
Oxo dicopper anchored on carbon nitride for selective oxidation of methane
Abstract Selective conversion of methane (CH 4 ) into value-added chemicals represents a grand challenge for the efficient utilization of rising hydrocarbon sources. We report here dimeric copper centers supported on graphitic carbon nitride (denoted as Cu 2 @C 3 N 4 ) as advanced catalysts for CH 4 partial oxidation. The copper-dimer catalysts demonstrate high selectivity for partial oxidation of methane under both thermo- and photocatalytic reaction conditions, with hydrogen peroxide (H 2 O 2 ) and oxygen (O 2 ) being used as the oxidizer, respectively. In particular, the photocatalytic oxidation of CH 4 with O 2 achieves >10% conversion, and >98% selectivity toward methyl oxygenates and a mass-specific activity of 1399.3 mmol g Cu −1 h −1 . Mechanistic studies reveal that the high reactivity of Cu 2 @C 3 N 4 can be ascribed to symphonic mechanisms among the bridging oxygen, the two copper sites and the semiconducting C 3 N 4 substrate, which do not only facilitate the heterolytic scission of C-H bond, but also promotes H 2 O 2 and O 2 activation in thermo- and photocatalysis, respectively.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Surface Molecular Chemistry in Solar Fuel Research
Through this research, we aim to combine transition metal catalysts with light-absorbing semiconductors for use in efficient solar energy conversion. Upon receiving photogenerated electrons from the semiconductors, the transition metal catalysts could accelerate the reduction of carbon dioxide into energy-rich fuels. We have deposited cobalt complexes, including cobalt macrocycles and single cobalt catalysts, onto different semiconductors that demonstrated targeted activities in photochemical carbon dioxide reduction. The structures and catalytic mechanisms of the surface cobalt catalysts were investigated using advanced techniques, including X-ray absorption spectroscopy at DOE user facilities. Our research provides new strategies to enable effective coupling between molecularly defined catalytic sites with heterogeneous surfaces for converting solar energy into chemicals and fuels. Research results obtained through this project have been disseminated through journal publications and conference presentation. In addition, this project provided important interdisciplinary training opportunities for two postdoctoral scholars, four graduate researchers, and one high school student. It also allowed us to establish successful State-National Laboratory partnerships with Brookhaven National Lab and Argonne National Lab.
14 SOLAR ENERGY↗
Engineered disorder in CO 2 photocatalysis
Light harvesting, separation of charge carriers, and surface reactions are three fundamental steps that are essential for an efficient photocatalyst. Here we show that these steps in the TiO 2 can be boosted simultaneously by disorder engineering. A solid-state reduction reaction between sodium and TiO 2 forms a core-shell c-TiO 2 @a-TiO 2-x (OH) y heterostructure, comprised of HO-Ti-[O]-Ti surface frustrated Lewis pairs (SFLPs) embedded in an amorphous shell surrounding a crystalline core, which enables a new genre of chemical reactivity. Specifically, these SFLPs heterolytically dissociate dihydrogen at room temperature to form charge-balancing protonated hydroxyl groups and hydrides at unsaturated titanium surface sites, which display high reactivity towards CO 2 reduction. This crystalline-amorphous heterostructure also boosts light absorption, charge carrier separation and transfer to SFLPs, while prolonged carrier lifetimes and photothermal heat generation further enhance reactivity. The collective results of this study motivate a general approach for catalytically generating sustainable chemicals and fuels through engineered disorder in heterogeneous CO 2 photocatalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanistic Investigation of Enhanced Catalytic Selectivity toward Alcohol Oxidation with Ce Oxysulfate Clusters
Ceria-based materials have been highly desired in photocatalytic reactions due to their easily redox property and strong oxygen storage and transfer ability. Herein, we report the structures of one CeCe 70 oxysulfate cluster and four MCe 70 clusters (M = Cu, Ni, Co, Fe) with the same Ce 70 core. As noted, single crystal X-ray diffraction confirmed the structures of CeCe 70 and the MCe 70 series, while Raman spectroscopy indicated an increase in oxygen defects upon the introduction of Cu and Fe ions. The clusters catalyzed the oxidation of 4-methoxybenzyl alcohol under ultraviolet light. CuCe 70 and FeCe 70 exhibited enhanced reactivity compared to CeCe 70 and improved aldehyde selectivity compared to control experiments. In comparison with their homogeneous congeners, the CeCe 70 /MCe 70 clusters altered the location of radical generation from the bulk solution to the clusters’ surfaces. Mechanistic studies highlight the role of oxygen defects and specific transition metal introduction for efficient photocatalysis. Furthermore, the mechanistic pathway in this study provides insight on how to select or design a highly selective catalyst for photocatalysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Polymer connectivity governs electrophotocatalytic activity in the solid state
The reductive functionalization of inert substrates such as chloroarenes is a critical yet challenging transformation relevant to both environmental remediation and organic synthesis. Combining electricity and light is an emerging strategy to access the deeply reducing potentials required for single electron transfer to chloroarenes, yet this approach is limited by poor stability and mechanistic ambiguity. Here, in this work, we demonstrate heterogeneous electrophotocatalysis using redox-active rylene diimide polymers for the reduction of chloroarenes. We find that the electrophotocatalytic activity varies dramatically as a function of the rylene diimide and the redox-inactive polymer backbone. In particular, a flexible, non-conjugated perylenediimide polymer outperforms all other tested electrophotocatalysts. Transient absorption spectroscopy reveals that precomplexation between the doubly reduced perylenediimide and the haloarene substrate is key to productive catalysis. Overall, this work highlights heterogeneous electrophotocatalysis using insoluble redox-active organic materials and provides critical structure–property insights into solid-state electrophotocatalytic activity, informing the development of next-generation materials for sustainable synthesis.
electrocatalysis↗
Nanoscale Measurements of Charge Transfer at Cocatalyst/Semiconductor Interfaces in BiVO 4 Particle Photocatalysts
Semiconductor photocatalyst particles convert solar energy to fuels like H 2 . The particles are often assumed to provide crystalline-facet-dependent electron-hole separation. A common strategy is to deposit HER electrocatalyst on electron-selective facets and OER electrocatalyst on hole-selective facets. A precise understanding of how charge-carrier-selective contacts emerges and how they rationally designed, however, is missing. Using a combination of ex-situ and in-situ conducting-AFM experiments and new ionomer/catalyst-semiconductor test structures, we show how heterogeneity in charge-carrier selectivity can be measured at the nanoscale. We discover that the presence of interface water/electrolyte is critical to induce hole selectivity between the CoO x water-oxidation catalyst and the BiVO 4 light absorber. pH-dependent measurements suggest that negative surface charge on the semiconductor is central to inducing hole selectivity. Furthermore, the work also demonstrates a new approach to control local pH and introduce water using thin-film ionomers compatible with conductive-AFM measurements.
14 SOLAR ENERGY↗
Dynamic Behavior of Platinum Atoms and Clusters in the Native Oxide Layer of Aluminum Nanocrystals
Strong metal–support interactions (SMSIs) are well-known in the field of heterogeneous catalysis to induce the encapsulation of platinum (Pt) group metals by oxide supports through high temperature H 2 reduction. However, demonstrations of SMSI overlayers have largely been limited to reducible oxides, such as TiO 2 and Nb 2 O 5 . In this report we show that the amorphous native surface oxide of plasmonic aluminum nanocrystals (AlNCs) exhibits SMSI-induced encapsulation of Pt following reduction in H 2 in a Pt structure dependent manner. Reductive treatment in H 2 at 300 °C induces the formation of an AlO x SMSI overlayer on Pt clusters, leaving Pt single-atom sites (Ptiso) exposed available for catalysis. The remaining exposed Pt iso species possess a more uniform local coordination environment than has been observed on other forms of Al 2 O 3 , suggesting that the AlO x native oxide of AlNCs presents well-defined anchoring sites for individual Pt atoms. This observation extends our understanding of SMSIs by providing evidence that H 2 -induced encapsulation can occur for a wider variety of materials and should stimulate expanded studies of this effect to include nonreducible oxides with oxygen defects and the presence of disorder. It also suggests that the single-atom sites created in this manner, when combined with the plasmonic properties of the Al nanocrystal core, may allow for site-specific single-atom plasmonic photocatalysis, providing dynamic control over the light-driven reactivity in these systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A new perspective on lone pair dynamics in halide perovskites
Halide perovskites form the foundation of an emerging class of materials for broad application in renewable and sustainable applications, including photocatalysis and solar energy harvesting. These materials exhibit beneficial photophysical properties, including bandgaps suitable for solar energy harvesting and efficient charge screening that underlies efficient charge carrier separation and resistance to defects. For organic–inorganic hybrid perovskites, these benefits are thought to arise, in part, from dipolar molecular cations that can reorient in response to charged particles and defects. In this work, we provide a similar perspective for inorganic metal halide perovskites, which do not contain molecular species with permanent dipoles. We discuss how lone pair electrons lead to dipolar ions that exhibit dynamics in analogy with traditional molecular plastic crystals and hybrid perovskites. We argue that further understanding these electronic plastic crystal motions with first principles simulations and synchrotron scattering can help create a basic understanding of photophysical properties of metal halide perovskites and inform the design of advanced functional materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Electronic and catalytic engineering in two-dimensional vdW metal–organic frameworks through alloying
Bimetallic metal-organic framework (MOF s ) alloys, in which heterogeneous metal clusters are incorporated into their backbone, are capable of highly selective separations and catalysis. Due to limitations in our fundamental understanding of their alloying, however, established methods result in phase-separated or amorphous two-dimensional (2D) MOF s or lack precise control over alloy ratios. Here, our results demonstrate 2D MOF alloys where metal cation ratios (M 1 and M 2 ) in M 1 xM 2 1-x BDC (M 1 or M 2 = Zn, Cu, Ni, Co, Fe, Mn) can be engineered on demand by controlling the metal salt dissociation constants. Resulting MOF alloys exhibit a highly 2D nature with excellent crystallinity and minute control over metal cation ratios. Overall, our experimental and theoretical results show that their electronic bandgaps and photoexcited carrier lifetimes can be engineered by metal cation alloying. Interestingly, 2D alloyed MOF s enable high-efficiency photo-catalytic water reduction performance in Co/Ni MOF alloys owing to the spatially separated metal clusters in 2D MOF alloys.
2D materials↗