Search NASA⌕ Search

SEARCH · Search NASA

Results for “heterojunction diode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

31 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Space charge trap-assisted recombination suppressing layer for low-voltage diode operation

Shockley-Read-Hall (SRH) generation and/or recombination in heterojunction devices is suppressed by unconventional doping at or near the heterointerface. The effect of this doping is to shift SRH generation and/or recombination preferentially into the wider band gap material of the heterojunction. This reduces total SRH generation and/or recombination in the device by decreasing the intrinsic carrier concentration ni at locations where most of the SRH generation and/or recombination occurs. The physical basis for this effect is that the SRH generation and/or recombination rate tends to decrease as ni around the depletion region decreases, so decreasing the effective ni in this manner is a way to decrease SRH recombination.

Santhanam, Parthiban↗
DOE OSTI2021

Improved forward voltage and external quantum efficiency scaling in multi-active region III-nitride LEDs

Ultra-low voltage drop tunnel junctions (TJs) were utilized to enable multi-active region blue light emitting diodes (LEDs) with up to three active regions in a single device. The multi-active region blue LEDs were grown monolithically by metal-organic chemical vapor deposition (MOCVD) without growth interruption. This is the first demonstration of a MOCVD grown triple-junction LED. Optimized TJ design enabled near-ideal voltage and EQE scaling close to the number of junctions. Furthermore, this work demonstrates that with proper TJ design, improvements in wall-plug efficiency at high output power operation are possible by cascading multiple III-nitride based LEDs.

42 ENGINEERING↗
DOE OSTI2024

β-Ga2O3-Based Heterostructures and Heterojunctions for Power Electronics: A Review of the Recent Advances

During the past decade, Gallium Oxide (Ga2O3) has attracted intensive research interest as an ultra-wide-bandgap (UWBG) semiconductor due to its unique characteristics, such as a large bandgap of 4.5–4.9 eV, a high critical electric field of ~8 MV/cm, and a high Baliga’s figure of merit (BFOM). Unipolar β-Ga2O3 devices such as Schottky barrier diodes (SBDs) and field-effect transistors (FETs) have been demonstrated. Recently, there has been growing attention toward developing β-Ga2O3-based heterostructures and heterojunctions, which is mainly driven by the lack of p-type doping and the exploration of multidimensional device architectures to enhance power electronics’ performance. This paper will review the most recent advances in β-Ga2O3 heterostructures and heterojunctions for power electronics, including NiOx/β-Ga2O3, β-(AlxGa1−x)2O3/β-Ga2O3, and β-Ga2O3 heterojunctions/heterostructures with other wide- and ultra-wide-bandgap materials and the integration of two-dimensional (2D) materials with β-Ga2O3. Discussions of the deposition, fabrication, and operating principles of these heterostructures and heterojunctions and the associated device performance will be provided. This comprehensive review will serve as a critical reference for researchers engaged in materials science, wide- and ultra-wide-bandgap semiconductors, and power electronics and benefits the future study and development of β-Ga2O3-based heterostructures and heterojunctions and associated power electronics.

Herath Mudiyanselage, Dinusha (ORCID:0000000186119↗
DOE OSTI2023

Metal-semiconductor-metal structured p-i-n GaN/AlGaN ultrafast detectors for deep-UV photodetection

We report the productive outcome of the design, fabrication, and testing of a new class of GaN/AlGaN-based ultrafast, sensitive photodiodes for deep-UV solar blind photodetection. Pt was employed as the interdigitated metal electrode to establish that while a Schottky contact was formed at the metal/semiconductor heterojunction, it was the quantum wells in the p-i-n vertical structure that produced the diode characteristics of the detectors. The metal–semiconductor–metal design retained its ultrafast property as expected in the p-i-n structure because the spacing between the interdigitated fingers was asymmetrically implemented to optimize the photogenerated carriers’ transit time from the quantum well to the external circuitry. Also, the vertical p-i-n structure provided its renowned efficient photocarrier generation, which was significantly enhanced by the delta quantum well architecture of the vertical epitaxial structure. The active area of the device was 300 μm × 300 μm with 5-μm finger width, and asymmetric electrode spacing of 2 μm, 3 μm, and 5 μm. Here, the best device had peak responsivity of 3.5 A/W under 262-nm illumination with full width half maximum of 337.2-ps and 37.5-ps rise times when biased with 20 V.

efficient↗
DOE OSTI2024

Slope Efficiency and Voltage Reduction at High Current Densities in AlInGaAs Diode Lasers

Here, the slope efficiency and drive voltage of broad area AlInGaAs laser diodes near 865 nm is observed to decrease significantly under quasi-CW pulsed operation at currents well above threshold, in a manner that cannot be explained by thermal effects or carrier leakage over heterojunction barriers. Simulations show that the slope efficiency reduction is explicable by increased free carrier absorption in the waveguide region. Empirical formulas are presented to represent these effects in a closed analytic form suitable for use in simulators for diode-pumped laser systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Harnessing Quantum Capacitance in 2D Material/Molecular Layer Junctions for Novel Electronic Device Functionality

Two-dimensional (2D) materials promise advances in electronic devices beyond Moore’s scaling law through extended functionality, such as non-monotonic dependence of device parameters on input parameters. However, the robustness and performance of effects like negative differential resistance (NDR) and anti-ambipolar behavior have been limited in scale and robustness by relying on atomic defects and complex heterojunctions. In this paper, we introduce a novel device concept that utilizes the quantum capacitance of junctions between 2D materials and molecular layers. We realized a variable capacitance 2D molecular junction (vc2Dmj) diode through the scalable integration of graphene and single layers of stearic acid. The vc2Dmj exhibits NDR with a substantial peak-to-valley ratio even at room temperature and an active negative resistance region. The origin of this unique behavior was identified through thermoelectric measurements and ab initio calculations to be a hybridization effect between graphene and the molecular layer. The enhancement of device parameters through morphology optimization highlights the potential of our approach toward new functionalities that advance the landscape of future electronics.

2D materials↗
DOE OSTI2022

Over 31% efficient indoor organic photovoltaics enabled by simultaneously reduced trap-assisted recombination and non-radiative recombination voltage loss

Indoor organic photovoltaics (OPVs) have shown great potential application in driving low-energy-consumption electronics for the Internet of Things. There is still great room for further improving the power conversion efficiency (PCE) of indoor OPVs, considering that the desired morphology of the active layer to reduce trap-assisted recombination and voltage losses and thus simultaneously enhance the fill factor (FF) and open-circuit voltage for efficient indoor OPVs remains obscure. Herein, by optimizing the bulk and interface morphology via a layer-by-layer (LBL) processing strategy, low leakage current and low non-radiative recombination loss can be synergistically achieved in PM6:Y6-O based devices. Detailed characterizations reveal the stronger crystallinity, purer domains and ideal interfacial contacts in the LBL devices compared to their bulk-heterojunction (BHJ) counterparts. The optimized morphology yields a reduced voltage loss and an impressive FF of 81.5%, and thus contributes to a high PCE of 31.2% under a 1000 lux light-emitting diode (LED) illumination in the LBL devices, which is the best reported efficiency for indoor OPVs. Additionally, this LBL strategy exhibits great universality in promoting the performance of indoor OPVs, as exemplified by three other non-fullerene acceptor systems. Finally, this work provides guidelines for morphology optimization and synergistically promotes the fast development of efficient indoor OPVs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fully Transparent GaN Homojunction Tunnel Junction-Enabled Cascaded Blue LEDs.

A sidewall activation process was optimized for buried magnesium-doped p-GaN layers yielding a significant reduction in tunnel junction-enabled light emitting diode (LED) forward voltage. This buried activation enabled the realization of cascaded blue LEDs with fully transparent GaN homojunction tunnel junctions. The initial optimization of buried p-GaN activation was performed on PN junctions grown by metal organic chemical vapor deposition (MOCVD) buried under hybrid tunnel junctions grown by MOCVD and molecular beam epitaxy. Next the activation process was implemented in cascaded blue LEDs emitting at 450 nm, which were enabled by fully transparent GaN homojunction tunnel junctions. The tunnel junction-enabled multi-active region blue LEDs were grown monolithically by MOCVD. This work demonstrates a state-of-the-art tunnel junction-enabled cascaded LED utilizing homojunction tunnel junctions which do not contain any heterojunction interface.

42 ENGINEERING↗
DOE OSTI2024

Trap Passivation for Reducing On-Resistance and Saturation Voltage in Wafer-Bonded InGaAs-Channel/GaN-Drain Vertical FETs

High frequency and high power are the driving forces behind semiconductor transistor technology. However, conventional devices have the tradeoff of either being high speed or high breakdown—but not both. Wafer-bonded current aperture vertical electron transistors (BAVETs) help eliminate the tradeoff by combining a high-speed III-As channel to a high-breakdown III-N drift region. The device presented herein comprises of an InAlAs gate-barrier/InGaAs channel, wafer-bonded to an InGaN/GaN drift region, with the InGaAs/InGaN interface referred to as the wafer-bonded interface (WBI). The electronic behavior of WBIs is yet less known but necessary in realizing the potential of a BAVET. Herein, strong trap activity at the WBI is shown to be the cause of abnormally high saturation voltage ( V DS_SAT ) in BAVETs. The traps cause unintentional space charge (SC) region in the drain region of the device. This causes a drain resistance, a higher ON-resistance ( R ON ), and a higher V DS_SAT . Here, the challenge is overcome by hydrogen passivation of traps at WBI by using a p-doping for the InAlAs layer, which reduces the trap-charge concentration at the WBI. Consequently, the width of the SC region is reduced and a reduction in V DS_SAT is demonstrated, wherein it reduces from >12 to 5 V.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dual interfacial H-bonding-enhanced deep-blue hybrid copper–iodide LEDs

Solution-processed light-emitting diodes based on non-toxic copper–iodide hybrids are a compelling solution for efficient and stable deep-blue lighting, owing to their tunability, high photoluminescence efficiency and environmental sustainability. Here we present a hybrid copper–iodide that shows near-unity photoluminescence quantum yield (99.6%) with an emission wavelength of 449 nm and colour coordinates (0.147, 0.087), alongside its emission mechanism and charge transport characteristics. Here, we use the thin film of this hybrid as the sole active emissive layer to fabricate deep-blue light-emitting diodes and subsequently enhance the device performance through a dual interfacial hydrogen-bond passivation strategy. This synergetic surface modification approach, integrating a hydrogen-bond-acceptor self-assembled monolayer with an ultrathin polymethyl methacrylate capping layer, effectively passivates both heterojunctions of the copper–iodide hybrid emissive layer and optimizes charge injections. We achieve a maximum external quantum efficiency of 12.57%, a maximum luminance of 3,970.30 cd m −2 with colour coordinates (0.147, 0.091) and an excellent operational stability (half-lifetime) of 204 hours under ambient conditions. We further showcase a large-area device of 4 cm 2 that maintains high efficiency. Our findings reveal the potential of copper–iodide-based hybrid materials for applications in solid-state lighting and display technologies, offering a versatile strategy for enhancing device performances.

14 SOLAR ENERGY↗
DOE OSTI2021

Metamorphic Tunnel Junctions Grown Via MOCVD Designed for GaAs 0.75 P 0.25 /Si Tandem Solar Cells

A high-performance metamorphic Al 0.2 Ga 0.8 As 0.75 P 0.25 /GaAs 0.75 P 0.25 heterojunction tunnel junction structure was developed for application to monolithic epitaxial GaAs 0.75 P 0.25 /Si 1.7 eV/1.1 eV bandgap tandem solar cells produced via metal-organic chemical vapor deposition. Doping optimization focused on both bulk doping concentrations and mitigating the transient incorporation effects that otherwise causes non-abrupt doping profiles in the Te doped layer. Furthermore, these efforts resulted in a fully-relaxed metamorphic tunnel diode at the target lattice constant having a peak tunneling current density (JP) of 279.1 A·cm –2 and a zero-bias resistance area product (RA) of 3.0×10 –4 Ω·cm 2 . After post-growth annealing to emulate the thermal load of the GaAs 0.75 P 0.25 top cell growth and elimination of the performance enhancing carbon activation anneal, the device achieved JP = 13.1 A·cm –2 and RA = 1.5×10 –3 Ω·cm 2 . These worst-case values are very promising as they enable the operation of GaAs 0.75 P 0.25 /Si tandems under one-sun AM1.5G illumination with negligible series resistance and at AM1.5D concentrations up to 240 suns with only 0.1% absolute efficiency loss.

14 SOLAR ENERGY↗
DOE OSTI2020

Damp Heat Induced Degradation of Silicon Heterojunction Solar Cells With Cu-Plated Contacts

Damp heat exposure is one of the most stringent environments for testing the durability of solar cells in packaged modules. Damp heat stresses and induces a variety of degradation modes in solar cells and modules: for example, moisture-induced corrosion of electrodes and interconnections, deterioration of polymeric materials, and/or thermally activated diffusion processes. To screen for these and other potential degradation modes, we subject one-cell modules containing silicon heterojunction (SHJ) solar cells with Cu-plated contacts to extended damp heat tests at 85 °C/85% relative humidity. SHJ cells were laminated with two common encapsulants: ethylene vinyl acetate (EVA) and polyolefin elastomer (POE), and two constructions: glass-backsheet and glass-glass. We observe degradation in all components of solar cell maximum power (PMP): current, voltage, and fill factor, and find evidence of increased carrier recombination and nonideal diode behavior with increasing stress. For glass-backsheet constructions, EVA samples generally degrade more than POE by a factor of approximately 1.5x PMP, and the different encapsulants produce different degradation patterns. Similar trends are observed in glass-glass modules, but to a lesser degree. In a different experiment, we observe a decrease in effective minority carrier lifetime of nonmetallized SHJ precursors measured after damp heat. This implies that some degradation unrelated to the contacts is to be expected and confirms the observation of increasing recombination.

14 SOLAR ENERGY↗
DOE OSTI2021

Influence of the Bulk Resistivity on Silicon Heterojunction Solar Cells and Module Reliability

Recent developments in industry on surface passivation open the possibility of using less doped substrates in silicon solar cells. In this report we investigate how the bulk resistivity affects the performance of silicon cells and the reliability of modules. Herein, n- and p-type silicon heterojunction cells with bulk resistivities between 3 and 15 000 Ωcm are studied. We measure the current–voltage characteristics of n-type cells across the resistivity range, and we find comparable responses to illumination intensities between 0.1 and 1 suns. The cells with bulk resistivities over 1000 Ωcm show breakdown voltages larger than -1000 V, almost two orders of magnitude higher than in typical commercial cells. Although modules have bypass-diodes to prevent cells from going into breakdown, higher breakdown voltages can improve the reliability of modules in case of bypass-diode failure and reduce the module cost by easing the number of bypass-diodes required. Finally, the cells have been submitted to light soaking. The float-zone p-type cells with bulk resistivities over 10 000 Ωcm are less sensitive to light-induced degradation than cells with bulk resistivities below 10 Ωcm. The former show to recover few hours after light soaking, while the latter recover only after dark annealing.

14 SOLAR ENERGY↗