Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrotreating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

STABILIZATION OF BIO-OIL TO ENABLE ITS HYDROTREATING TO PRODUCE BIOFUELS

Fast pyrolysis is considered to be the simplest and most cost-effective approach to produce liquid oil (bio-oil) from biomass. Bio-oil is not suitable to substitute for petroleum as high-quality fuels and significant upgrading such as hydrotreating is required to remove oxygen, add hydrogen, and rearrange carbon backbone of bio-oil. However, the grand challenge in bio-oil hydrotreating technology is bio-oil instability, which limits the lifetime of catalyst and operation. To enable a sustainable and economically viable process for bio-oil hydrotreating, it is vital to develop effective technologies for stabilizing bio-oils. This chapter will be devoted to bio-oil stabilization. The current understating of the major cause of bio-oil instability, condensation of reactive species such as sugar, aldehydes, ketones, and phenolics, is elucidated. The reported physical and chemical methods for bio-oil stabilization are summarized in detail, with a specific focus on bio-oil catalytic hydrogenation for stabilization. The impact of stabilization on bio-oil hydrotreating is discussed as well.

Wang, Huamin↗

Creating values from wastes: Producing biofuels from waste cooking oil via a tandem vapor-phase hydrotreating process

Here, this study is focused on producing biofuels from waste oils via a tandem vapor-phase hydrotreating process in a pressurized two-stage fixed bed reactor over a bifunctional Ni/Al 2 O 3 -SiO 2 catalyst under 0.25 MPa H 2 . A 100% hydrodeoxygenation efficiency both in liquid and gas products was observed, yielding 83.9 wt% C 5 -C 19 n-alkanes which corresponds to a 7.4-fold increase compared with that obtained from non-catalytic conversion. The hydrodeoxygenation mechanism of waste cooking oil in the catalytic tandem hydrotreating process induced by Ni/Al 2 O 3 -SiO 2 was proposed. The hydropyrolysis temperature in the first reactor, hydrogenation temperature in the second reactor, reaction pressure, catalyst to waste cooking oil mass ratio, and gas hourly space velocity (GHSV) was optimized at 550 °C, 300 °C, 0.25 MPa, 3, and 56 s -1 , respectively. The application potential of this cascade vapor-phase hydrotreating process was evaluated by employing different waste oils such as palm kernel oil, woody oil (swida wilsoniana), soapstock, and waste lubricating oil as feedstock, giving C 5 to C 19 n-alkane yields ranging from 21.6 to 87.5 wt%. This work provides a novel and promising approach to upcycle waste oils into upgraded biofuels compared with conventional catalytic pyrolysis.

09 BIOMASS FUELS↗

Hydrotreating Pyrolytic Lignin to Produce a Refinery Feedstock (Poster)

Fast pyrolysis of biomass followed by water separation to produce pyrolytic lignin and hydrotreating of the lignin could be used to produce a stable volatile low-oxygen intermediate liquid. Such a liquid could be converted into a finished motor-fuel in a refinery, taking advantage of the existing infrastructure and economies of scale of refineries. Hydrotreating just the lignin would consume less hydrogen while preserving about half of the energy of the original oil. The aqueous by-products could be reformed to produce the needed hydrogen and would contain much of the unwanted acids and unstable oxygenates. To assess such intermediate liquids, several pyrolytic lignins were prepared by mixing pyrolysis oil with water at 1:1 and 3:1 ratios. The carboxylic acidity in the pyrolytic lignin was reduced to 24 and 10 mg-KOH/g-lignin compared to 81 in the whole oil. These lignins were hydrotreated using Ni-Mo(S)/alumina, Pt/char, or Pd/C(activated) in a semi-batch 1 L stirred autoclave. The oil was stabilized under hydrogen at 150-280 degrees C, then water and light organics were removed by partial depressurization. Hydrodeoxygenation was then performed at 340-400 degrees C. Total pressure was controlled at 70 or 170 bar with hydrogen gas. Organic liquid yields of 39-56% were obtained. For many experiments the organic oxygen content was <7%, acidity was < 7 mg-KOH/g-oil, the volatility was greater than or equal to 94% and, on a carbon basis, the total yield of organic products miscible in hydrocarbons at a 1:10 ratio was over 50%. These properties are probably acceptable to a refinery.The residual liquids left in the reactor at the end of the experiment comprised 60-85% of the organic-phase product while the rest was condensate. 13C-NMR of the residual liquids showed that they were 50-80% aliphatic. 13C-NMR coupled with GC-MS identified phenolic compounds as the main oxygenates in most residual liquids.

09 BIOMASS FUELS↗

Methods of hydrotreating a liquid stream to remove clogging compounds

A method includes producing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a gas stream. At least a portion of the liquid stream is provided to a hydrotreating unit. At least a portion of selected in situ heat treatment clogging compositions in the liquid stream are removed to produce a hydrotreated liquid stream by hydrotreating at least a portion of the liquid stream at conditions sufficient to remove the selected in situ heat treatment clogging compositions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Location of Co and Ni promoter atoms in multi-layer MoS 2 nanocrystals for hydrotreating catalysis

The location of Co and Ni promoter atoms in industrial-style hydrotreating catalysts is examined by combining aberration-corrected scanning transmission electron microscopy and electron energy loss spectrum imaging. The observations unambiguously demonstrate that both Co and Ni promoter atoms occupy sites at all low-indexed edge terminations of hexagonally shaped multi-layer MoS 2 nanocrystals. In contrast, similar observations for single-layer MoS 2 nanocrystals show that Co-promoter atoms preferentially attach at the (-1 0 0) S-edge termination and are absent at the (1 0 0) Mo-edge termination. The apparent discrepancy between single- and multi-layer MoS 2 nanocrystals can be explained by the 2H-MoS 2 crystal structure, for which successive MoS 2 layers alternatingly expose Mo- and S-edge terminations in any of the low-indexed directions. Thus, the multi-layer Co-Mo-S and Ni-Mo-S nanocrystals, formed in the present type of industrial-style hydrotreating catalyst, are consistently described as a superposition of single-layer Co-Mo-S and Ni-Mo-S structures, and in turn, provide promoted edge sites with different steric accessibility for the organic compounds in mineral oil distillates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrotreating of Model Mixtures and Catalytic Fast Pyrolysis Oils over Pd/C

Noble metal catalysts may be attractive for hydrotreating of catalytic fast pyrolysis (CFP) oils. Model mixtures of raw noncatalytic fast pyrolysis and CFP oils representative of upgrading over HZSM-5 were hydrotreated in a batch reactor at 250-360 degrees C with palladium/carbon catalyst and 100 bar (cold) of hydrogen. The CFP oils gave high carbon yields of >95%, consumed less hydrogen per gram of oil produced, and had lower final oxygen concentrations than the raw oils did. GC/MS results were consistent with hydrogenation of alkenes and some oxygen-functionalized aromatic rings (e.g., phenolics) followed by hydrodeoxygenation at 360 degrees C. Complete deoxygenation was not obtained, and higher temperatures are recommended. The model oils' chemical transformations, carbon yields, and deoxygenation were similar to those of oils produced in a bench-scale reactor with HZSM-5 catalyst.

09 BIOMASS FUELS↗

Computational chemistry for NH 3 synthesis, hydrotreating, and NO x reduction: Three topics of special interest to Haldor Topsøe

Computational chemistry, especially density functional theory, has experienced a remarkable growth in terms of application over the last few decades. This is attributed to the improvements in theory and computing infrastructure that enable the analysis of systems of unprecedented size and detail at an affordable computational expense. In this perspective, we discuss recent progress and current challenges facing electronic structure theory in the context of heterogeneous catalysis. We specifically focus on the impact of computational chemistry in elucidating and designing catalytic systems in three topics of interest to Haldor Topsøe – ammonia, synthesis, hydrotreating, and NO x reduction. Furthermore, we then discuss the common tools and concepts in computational catalysis that underline these topics and provide a perspective on the challenges and future directions of research in this area of catalysis research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Active Sites of MoS 2 Based Hydrotreating Catalysts Using Modulation Excitation Spectroscopy

The reactive surface sites of MoS 2 hydrotreating catalysts (unpromoted as well as Co- and Ni-promoted) supported on MgAl 2 O 4 spinel were investigated with respect to the substitution of sulfur by oxygen using in situ XAS coupled with modulation excitation spectroscopy (MES). Specifically, MES experiments were carried out by periodically cycling between a H 2 O and H 2 S containing hydrogen gas mixture at 400 °C. Due to the low fraction of S–O exchange, conventional XANES and EXAFS data hardly showed any changes when these catalysts were exposed to increasing ratios of H 2 O to H 2 S in an H 2 atmosphere. XANES and EXAFS data extracted at the Mo K-edge by MES analysis showed that for approximately 1% of the Mo atoms, sulfur atoms are replaced by oxygen atoms when exposed to H 2 O, causing partial oxidation of these active sites. The reaction is reversible and Mo returns to its initial sulfide phase when H 2 O is removed and H 2 S is supplied in the feed. In the case of Co- and Ni-promoted catalysts, the magnitude of S–O exchange was found to be reduced, indicating the beneficial effect of promotion. MES at the Ni K-edge showed that Ni was oxidized during H 2 O exposure, which in turn delayed the Mo oxidation in the Ni-promoted catalyst. The structures of these catalysts under S–O exchange were modeled using density functional theory (DFT) calculations, showing that the edge atoms are affected strongly. For all three catalysts, OH substitution is more favorable, while O substitution could be possible at high H 2 O pressure for unpromoted MoS 2 . Mo K-edge XANES spectra calculated using these simulated structures support the results obtained from the MES experiments. In conclusion, the presented approach using MES in combination with XAS and supported by DFT can be extended in general to catalysts under operando conditions and is thus a useful tool for determination of the active site on an atomic-scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Opening pathways for the conversion of woody biomass into sustainable aviation fuel via catalytic fast pyrolysis and hydrotreating

Meeting aggressive decarbonization targets set by the International Civil Aviation Organization (ICAO) will require the rapid development of technologies to produce sustainable aviation fuel (SAF). Catalytic fast pyrolysis (CFP) can support these efforts by opening pathways for the conversion of woody biomass into an upgraded biogenic oil that can be further processed to SAF and other fuels. However, the absence of end-to-end experimental data for the process leads to uncertainty in the yield, product quality, costs, and sustainability of the pathway. The research presented here serves to address these needs through a series of integrated experimental campaigns in which real biomass feedstocks are converted to a final SAF product using large bench-scale continuous reactor systems. For these campaigns, the degree of catalytic upgrading during CFP was varied to produce CFP-oils with oxygen contents of 17 and 20 wt% on a dry basis. The CFP-oils were then hydrotreated and distilled into gasoline, diesel, and SAF fractions. Detailed yield and compositional data were obtained for each step of the process to inform technoeconomic and lifecycle analyses, and the fuel properties of the SAF fraction were evaluated to provide first-of-its-kind insight into the quality of the final product. This research reveals opportunities to optimize process carbon efficiency by tuning the degree of catalytic upgrading during the CFP step and highlights routes to produce a high-quality cycloalkane-rich SAF with 85–92% reduction in greenhouse gas emissions compared to fossil-based pathways.

09 BIOMASS FUELS↗

Unifying principles for catalytic hydrotreating processes (Final Technical Report)

This project builds on the hypothesis that the hydrotreating processes for the removal of oxygen and sulfur are fundamentally similar at the atomic-scale and existing knowledge from the treatment of petroleum derived feedstock can be leveraged for the design of novel catalysts for the upgrade of bio-oil. We tested this hypothesis by comparing computed potential energy diagrams for hydrodesulfurization (HDS) of thiophene over MoS 2 with hydrodeoxygenation (HDO) of furan over MoO 3 and concluded that certain aspects, such as catalyst promotion with transition metals, are valid strategies for both reactions. On the other hand, we also noticed significant differences in the mechanism for hydrogen (H 2 ) activation, which requires sites with metallic character. While MoS 2 is known to have metallic edge states that can catalyze H 2 dissociation, this elementary step is prohibitively slow on defect-free oxides. Only in the presence of vacancies or by creating metal/oxide interfaces can efficient H 2 activation sites during HDO be formed. The need for bifunctional catalyst when it comes to efficient and selective HDO or dehydrogenation reactions was further corroborated in joint experimental and theoretical studies of the Guerbet reaction for the coupling of biomass derived oxygenates over PdCu alloys, nitrate reduction over In-promoted Pd nanoparticles, and ethylene dehydroaromatization over Ga-exchanged ZSM-5 zeolites. All of these catalytic systems have in common that catalytic sites with distinct functional requirements are needed to create a working catalyst. Detailed computational studies were carried out for HDO of m -cresol and phenol on Ru-modified TiO 2 surfaces, which allowed us to attribute catalytic activity to the metal/oxide interface. A surprising finding was that heterolytic cleavage of the H-H bond across the Ru/TiO 2 interface was critically important, despite lower barriers for homolytic H 2 activation on Ru metal. The explanation lies in the high barriers for hydrogen spillover from Ru to TiO 2 , which becomes unnecessary in the heterolytic activation pathway. Moreover, we also reported that proton transfer steps between metal and oxide sites are mediated by weakly adsorbed surface water. During attempts to develop and validate a kinetic Monte Carlo (kMC) model for HDO reactions at the Ru/TiO 2 interface, it became clear that lateral interactions are paramount to describe realistic surface chemistry and without these interactions, the reduction and hydroxylation behavior from our simulations was inconsistent with reported experiments. To assess the importance of lateral interactions in popular computational catalyst design strategies relying on the identification of reactivity descriptors, which can be used along with Brønsted–Evans–Polanyi (BEP) and scaling relations as input to a microkinetic model (MKM) to make predictions for activity or selectivity trends, we compared predicted trends with those obtained from descriptor-based kMC models. We critically evaluated the benefits of kMC over MKM in terms of trend predictions and computational cost when using only a small set of input parameters. After confirming that in the absence of lateral interactions the kMC and MKM approaches yield identical trends and mechanistic information, we observed substantial differences between the two kinetic models when lateral interactions were introduced. The mean-field implementation applies coverage corrections directly to the descriptors, causing an artificial overprediction of the activity of strongly binding metals. In contrast, the cluster expansion in kMC implementation can differentiate among the highly active metals but it is very sensitive to the set of included interaction parameters. Considering that computational screening relies on a minimal set of descriptors, for which MKM makes reasonable trend predictions at a ca. three orders of magnitude lower computational cost than kMC, we concluded that the MKM approach does provide an overall better entry point for computational catalyst design. Overall, this project has led to 11 peer-reviewed publications, and their scientific is impact is well illustrated by their combined 702 citations.

08 HYDROGEN↗

Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case

The purpose of this study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels. This study has been conducted using the same methodology and underlying basis assumptions as the previous design cases for ethanol. The overall concept and specific processing steps were selected because significant data on this approach exists in the public literature. The analysis evaluates technology that has been demonstrated at the laboratory scale or is in early stages of commercialization. The fast pyrolysis of biomass is already at an early stage of commercialization, while upgrading bio-oil to transportation fuels has only been demonstrated in the laboratory and at small engineering development scale. Advanced methods of pyrolysis, which are under development, are not evaluated in this study. These may be the subject of subsequent analysis by OBP. The plant is designed to use 2000 dry metric tons/day of hybrid poplar wood chips to produce 76 million gallons/year of gasoline and diesel. The processing steps include: 1.Feed drying and size reduction 2.Fast pyrolysis to a highly oxygenated liquid product 3.Hydrotreating of the fast pyrolysis oil to a stable hydrocarbon oil with less than 2% oxygen 4.Hydrocracking of the heavy portion of the stable hydrocarbon oil 5.Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel blendstocks 6. Hydrogen production to support the hydrotreater reactors. The “as received” feedstock to the pyrolysis plant will be “reactor ready.” This development will likely further decrease the cost of producing the fuel. An important sensitivity is the possibility of co-locating the plant with an existing refinery. In this case, the plant consists only of the first three steps: feed prep, fast pyrolysis, and upgrading. Stabilized, upgraded pyrolysis oil is transferred to the refinery for separation and finishing into motor fuels. The off-gas from the hydrotreaters is also transferred to the refinery, and in return the refinery provides lower-cost hydrogen for the hydrotreaters. This reduces the capital investment. Production costs near $2/gal (in 2007 dollars) and petroleum industry infrastructure-ready products make the production and upgrading of pyrolysis oil to hydrocarbon fuels an economically attractive source of renewable fuels. The study also identifies technical areas where additional research can potentially lead to further cost improvements.

02 PETROLEUM↗

Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case

The purpose of this study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels. This study has been conducted using similar methodology and underlying basis assumptions as the previous design cases for ethanol. The overall concept and specific processing steps were selected because significant data on this approach exists in the public literature. The analysis evaluates technology that has been demonstrated at the laboratory scale or is in early stages of commercialization. The fast pyrolysis of biomass is already at an early stage of commercialization, while upgrading bio-oil to transportation fuels has only been demonstrated in the laboratory and at small engineering development scale. Advanced methods of pyrolysis, which are under development, are not evaluated in this study. These may be the subject of subsequent analysis by OBP. The plant is designed to use 2000 dry metric tons/day of hybrid poplar wood chips to produce 76 million gallons/year of gasoline and diesel. The processing steps include: 1.Feed drying and size reduction 2.Fast pyrolysis to a highly oxygenated liquid product 3.Hydrotreating of the fast pyrolysis oil to a stable hydrocarbon oil with less than 2% oxygen 4.Hydrocracking of the heavy portion of the stable hydrocarbon oil 5.Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel blendstocks 6. Hydrogen production to support the hydrotreater reactors. The "as received" feedstock to the pyrolysis plant will be "reactor ready". This development will likely further decrease the cost of producing the fuel. An important sensitivity is the possibility of co-locating the plant with an existing refinery. In this case, the plant consists only of the first three steps: feed prep, fast pyrolysis, and upgrading. Stabilized, upgraded pyrolysis oil is transferred to the refinery for separation and finishing into motor fuels. The off-gas from the hydrotreaters is also transferred to the refinery, and in return the refinery provides lower-cost hydrogen for the hydrotreaters. This reduces the capital investment. Production costs near $2/gal (in 2007 dollars) and petroleum industry infrastructure-ready products make the production and upgrading of pyrolysis oil to hydrocarbon fuels an economically attractive source of renewable fuels. The study also identifies technical areas where additional research can potentially lead to further cost improvements.

biofuels↗

Accelerated deployment of nanostructured hydrotreating catalysts. Final CRADA Report.

Nanomanufacturing offers an opportunity to create domestic jobs and facilitate economic growth. In response to this need, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy issued a Research Call to develop nanomanufacturing capabilities at the National Laboratories. High performance catalysts represent a unique opportunity to deploy nanomanufacturing technologies. Re-refining of used lube oil offers an opportunity to create manufacturing jobs and decrease dependence on imported petroleum. Improved catalysts are required to produce a better quality product, decrease environmental impact, extend catalyst life, and improve overall economics of lube oil re-refining. Argonne National Laboratory (Argonne) in cooperation with Universal Lubricants, Inc. (ULI) and Chemical Engineering Partners (CEP) have carried out a Cooperative Research and Development Agreement (CRADA) to prepare nanostructured hydrotreating catalysts using atomic layer deposition (ALD) to exhibit superior performance for the re-refining of used lube oil. We investigated the upgrading of recycled lube oil by hydrogenation using commercial, synthetically-modified commercial catalysts, and synthesized catalysts. A down-flow (trickle bed) catalytic unit was used for the hydrogenation experiments. In addition to carrying out elemental analyses of the various feed and product fractions, characterization was undertaken using H 1 and C 13 NMR. Initially commercial were evaluated. Second these commercial catalysts were promoted with precious metals using atomic layer deposition (ALD). Performance improvements were observed that declined with catalyst aging. An alternate approach was undertaken to deeply upgrade ULI product oils. Using a synthesized catalyst, much lower hydrogenation temperatures were required than commercial catalysts. Other performance improvements were also observed. The resulting lube oil fractions were of high purity even at low reaction severity. The products recovered from both the ALD and other processes were water-white (even those from the low temperature, low residence time (high space velocity), low conversion runs). These results indicate that highly upgraded recycle lube oils can be produced using ALD-deposited active metal catalysts. The use of H 1 and C 13 NMR for the characterization of the treated lube oils has been shown to be effective.

02 PETROLEUM↗