Search NASA⌕ Search

SEARCH · Search NASA

Results for “impact ionization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Deep Minima in the Triply Differential Cross Section for Ionization of Atomic Hydrogen by Electron and Positron Impact

We investigate ionization of atomic hydrogen by electron- and positron-impact. We apply the Coulomb–Born (CB1) approximation, various modified CB1 approximations, the three body distorted wave (3DW) approximation, and the time-dependent close-coupling (TDCC) method to electron-impact ionization of hydrogen. For electron-impact ionization of hydrogen for an incident energy of approximately 76.45 eV, we obtain a deep minimum in the CB1 triply differential cross section (TDCS). However, the TDCC for 74.45 eV and the 3DW for 74.46 eV gave a dip in the TDCS. For positron-hydrogen ionization (breakup) we apply the CB1 approximation and a modified CB1 approximation. We obtain a deep minimum in the TDCS and a zero in the CB1 transition matrix element for an incident energy of 100 eV with a gun angle of 56.13 °. Corresponding to a zero in the CB1 transition matrix element, there is a vortex in the velocity field associated with this element. For both electron- and positron-impact ionization of hydrogen the velocity field rotates in the same direction, which is anticlockwise. All calculations are performed for a doubly symmetric geometry; the electron-impact ionization is in-plane and the positron-impact ionization is out-of-plane.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Impact of ionization and transport on pedestal density structure in DIII-D and Alcator C-Mod

Abstract This paper investigates the role of ionization on the pedestal structure using both measurements and modeling for H-mode plasmas on DIII-D and Alcator C-Mod to enhance our ability to predict pedestal behavior in future pilot plants. The impact of the neutral penetration depth on the pedestal density is investigated using dimensionally matching hydrogen and deuterium DIII-D H-mode discharges at low and high electron density. The DIII-D Lyman- α diagnostic measurements show that hydrogen neutrals penetrate deeper inside the plasma on both the high field and low field side, while the pedestal electron density structure is similar for both isotopes. However, as the opaqueness increases we observe that the pedestal density gradient becomes stiff, similar to prior observations on DIII-D and C-Mod (Mordijck 2020 Nuclear Fusion 60 082006). In addition, these results also confirm prior measured and modeled poloidal asymmetries in neutral densities, indicating that to make transport predictions, 2D neutral modeling is necessary. The first direct validation of SOLPS-ITER for the measured brightness, emissivity and neutral densities for three different confinement regimes on C-Mod is introduced. The SOLPS-ITER model shows good agreement, within the constrains of the model for all regimes. In addition, a comparison of SOLPS-ITER modeling for DIII-D and C-Mod shows that as opaqueness increases, the role of divertor fueling and thus poloidal asymmetries in the neutral density profiles decreases. Based on these experimental and modeling results we estimate the size of a potential particle pinch using typical values for the diffusion coefficient for both DIII-D and C-Mod H-mode discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Ultrafast Laser Material Damage Simulation—A New Look at an Old Problem

The chirped pulse amplification technique has enabled the generation of pulses of a few femtosecond duration with peak powers multi-Tera and Peta–Watt in the near infrared. Its implementation to realize even shorter pulse duration, higher energy, and higher repetition rate laser systems relies on overcoming the limitations imposed by laser damage of critical components. In particular, the laser damage of coatings in the amplifiers and in post-compression optics have become a bottleneck. The robustness of optical coatings is typically evaluated numerically through steady-state simulations of electric field enhancement in multilayer stacks. However, this approach cannot capture crucial characteristics of femtosecond laser induced damage (LID), as it only considers the geometry of the multilayer stack and the optical properties of the materials composing the stack. This approach neglects that in the interaction of an ultrashort pulse and the materials there is plasma generation and associated material modifications. Here, we present a numerical approach to estimate the LID threshold of dielectric multilayer coatings based on strong field electronic dynamics. In this dynamic scheme, the electric field propagation, photoionization, impact ionization, and electron heating are incorporated through a finite-difference time-domain algorithm. We applied our method to simulate the LID threshold of bulk fused silica, and of multilayer dielectric mirrors and gratings. The results are then compared with experimental measurements. The salient aspects of our model, such as the implementation of the Keldysh photoionization model, the impact ionization model, the electron collision model for ‘low’-temperature, dense plasma, and the LID threshold criterion for few-cycle pulses are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A compact dication source for Ba 2+ tagging and heavy metal ion sensor development

Here, we present a tunable metal ion beam that delivers controllable ion currents in the picoamp range for testing of dry-phase ion sensors. Ion beams are formed by sequential atomic evaporation and single or multiple electron impact ionization, followed by acceleration into a sensing region. Controllability of the ionic charge state is achieved through tuning of electrode potentials that influence the retention time in the ionization region. Barium, lead, and cadmium samples have been used to test the system, with ion currents identified and quantified using a quadrupole mass analyzer. Realization of a clean Ba 2+ ion beam within a bench-top system represents an important technical advance toward the development and characterization of barium tagging systems for neutrinoless double beta decay searches in xenon gas. This system also provides a testbed for investigation of novel ion sensing methodologies for environmental assay applications, with dication beams of Pb 2+ and Cd 2+ also demonstrated for this purpose.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Laser-driven ionization mechanisms of aluminum for single particle aerosol mass spectrometry

Single particle aerosol mass spectrometry (SPAMS), an analytical technique for measuring the size and composition of individual micron-scale particles, is capable of analyzing atmospheric pollutants and bioaerosols much more efficiently and with more detail than conventional methods which require the collection of particles onto filters for analysis in the laboratory. Despite SPAMS’ demonstrated capabilities, the primary mechanisms of ionization are not fully understood, which creates challenges in optimizing and interpreting SPAMS signals. In this paper, we present a well-stirred reactor model for the reactions involved with the laser-induced vaporization and ionization of an individual particle. The SPAMS conditions modeled in this paper include a 248 nm laser which is pulsed for 8 ns to vaporize and ionize each particle in vacuum. The ionization of 1 μm, spherical Al particles was studied by approximating them with a 0-dimensional plasma chemistry model. The primary mechanism of absorption of the 248 nm photons was pressure-broadened direct photoexcitation to Al(y 2 D). Atoms in this highly excited state then undergo superelastic collisions with electrons, heating the electrons and populating the lower energy excited states. We found that the primary ionization mechanism is electron impact ionization of various excited state Al atoms, especially Al(y 2 D). Because the gas expands rapidly into vacuum, its temperature decreases rapidly. The rate of three-body recombination (e - + e - + Al + → Al + e - ) increases at low temperature, and most of the electrons and ions produced recombine within several μs of the laser pulse. The importance of the direct photoexcitation indicates that the relative peak heights of different elements in SPAMS mass spectra may be sensitive to the available photoexcitation transitions. We also discuss the effects of laser intensity, particle diameter, and expansion dynamics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Impact of ionization peak location on measured opaqueness in DIII-D H-mode plasmas

This study investigates the relationship between electron pedestal density and the location of the ionization peak on neutral penetration in DIII-D H-mode plasmas, utilizing a database of Lyman-α emission measurements. The high electron density leads to neutrals being ‘screened’ and the ionization front being pushed out into the Scrape-Off Layer (SOL). This is also referred to as the neutral opaqueness, which is heuristically expected to scale with edge plasma density and machine size. However, at lower electron pedestal density, the penetration depth of the neutrals varies, and measured opaqueness deviates from the heuristic scaling. The database reveals that at low density, when the ionization peak is located in SOL region, the linear relationship between the electron density and neutral penetration holds. However, when the peak is located inside the separatrix, the penetration of the neutrals (λ n 0 ) is much wider ~3.0–3.5 cm, breaking the heuristic opaqueness approximation. These findings provide valuable insights into fueling efficiency and plasma behavior, with implications for Fusion Pilot Plants where high pedestal densities are anticipated and where the neutral opaqueness behaves like its heuristic approximation. This analysis offers a framework to refine neutral opaqueness approximations, enhancing the predictive capability for advanced tokamak operations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Formation of the C 4 H n + ( n = 2–5) ions upon ionization of acetylene clusters in helium droplets

Infrared (IR) spectroscopy using ultracold helium nanodroplet matrices has proven to be a powerful method to interrogate encapsulated ions, molecules, and clusters. Due to the helium droplets’ high ionization potential, optical transparency, and ability to pick up dopant molecules, the droplets offer a unique modality to probe transient chemical species produced via photo- or electron impact ionization. Here, in this work, helium droplets were doped with acetylene molecules and ionized via electron impact. Ion-molecule reactions within the droplet volume yield larger carbo-cations that were studied via IR laser spectroscopy. This work is focused on cations containing four carbon atoms. The spectra of C 4 H 2 + , C 4 H 3 + , and C 4 H 5 + are dominated by diacetylene, vinylacetylene, and methylcyclopropene cations, respectively, which are the lowest energy isomers. On the other hand, the spectrum of C 4 H 4 + ions hints at the presence of several co-existing isomers, the identity of which remains to be elucidated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

An upper pressure limit for low- Z benign termination of runaway electron beams in TCV

Abstract We present a model for the particle balance in the post-disruption runaway electron plateau phase of a tokamak discharge. The model is constructed with the help of, and applied to, experimental data from TCV discharges investigating the so-called ‘low- Z benign termination’ runaway electron mitigation scheme. In the benign termination scheme, the free electron density is first reduced in order for a subsequently induced MHD instability to grow rapidly and spread the runaway electrons widely across the wall. We show that the observed non-monotonic dependence of the free electron density with the measured neutral pressure is due to plasma re-ionization induced by runaway electron impact ionization. At higher neutral pressures, more target particles are present in the plasma for runaway electrons to collide with and ionize. Parameter scans are conducted to clarify the role of the runaway electron density and energy on the free electron density, and it is found that only the runaway electron density has a noticeable impact. While the free electron density is shown to be related to the spread of heat fluxes at termination, the exact cause for the upper neutral pressure limit remains undetermined and an object for further study.

Hoppe, M. (ORCID:0000000339948977)↗
DOE OSTI2025

Sheath transitions in a cylindrical filament discharge: Axisymmetric 1D3V PIC-MCC simulations

We present the first nonplanar hot cathode discharge simulations that capture the role of the trapped-ions plasma, elucidating new phenomena unobservable in planar geometric discharges. A discharge struck between a single emitting wire filament cathode and a bounding anode is simulated in cylindrical geometry using an axisymmetric (radial) particle-in-cell Monte-Carlo collisions code. Operating the discharge near its ionization energy threshold can lead to the formation of a two plasma mode (TPM). One plasma forms in the conventional upstream region through electron impact ionization of background neutrals. A second plasma, whose global effect on the discharge was not previously well understood, forms downstream through the trapping of cold ions in the potential well of the filament’s virtual cathode, a process enabled by ion-neutral charge exchange collisions. Three space charge regions intersperse the electrode gap—an emissive sheath between the cathode filament and trapped-ions plasma, a double layer between the two plasmas, and a classical sheath between the upstream plasma and the outer anode. Simulations exhibit mode transitions and quenching instabilities that transform the discharge between the TPM and other single-plasma sheath modes that include classical (temperature-limited), space charge limited, and inverse (anode glow) modes. The transitions are explained via “aid-and-compete” dynamics wherein the growth of one plasma enhances growth in the other while concurrently exhibiting expansion dynamics antagonistic to each other. The system exhibits strong hysteresis memory during the mode transitions. Improved understanding and control of these sheath mode transitions are expected to benefit plasma applications with hot cathodes.

Electrical hysteresis↗
DOE OSTI2022

Lagrangian particle simulation of hydrogen pellets and SPI into runaway electron beam in ITER

Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [Samulyak et al., Nucl. Fusion, 61(4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single-fragment ablation quantifies the influence of various factors, in particular, the impact ionization by runaway electrons and cross-field transport models, on the dynamics of ablated plasma and its penetration into the runaway beam. Simulations of SPI performed using different numbers of pellet fragments study the formation and evolution of the ablation clouds and their large-scale dynamics in ITER. In conclusion, the penetration depth of the ablation clouds is found to be of the order of 50 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Kinetic modeling of neutral transport for a continuum gyrokinetic code

In this work we present the first-of-its-kind coupling of a continuum full- f gyrokinetic turbulence model with a 6D continuum model for kinetic neutrals, carried out using the Gkeyll code. Our objective is to improve the first-principle understanding of the role of neutrals in plasma fueling, detachment, and their interaction with edge plasma profiles and turbulence statistics. Our model includes only atomic hydrogen and incorporates electron-impact ionization, charge exchange, and wall recycling. These features have been successfully verified with analytical predictions and benchmarked with the DEGAS2 Monte Carlo neutral code. We carry out simulations for a scrape-off layer (SOL) with simplified geometry and National Spherical Torus Experiment parameters. We compare these results to a baseline simulation without neutrals and find that neutral interactions reduce the normalized density fluctuation levels and associated skewness and kurtosis, while increasing auto-correlation times. A flatter density profile is also observed, similar to the SOL density shoulder formation in experimental scenarios with high fueling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Effect of neutral interactions on parallel transport and blob dynamics in gyrokinetic scrape-off layer simulations

The effect of neutral interactions on scrape-off layer (SOL) turbulence is investigated in a continuum gyrokinetic code that has been coupled to a continuum kinetic model of neutral transport. This extends the work of a previous paper, which compared two NSTX SOL simulations in simple helical geometry, one with neutrals and one without. The former included electron-impact ionization, charge exchange, and wall recycling. Here, the case with neutrals is compared to a gyrokinetic-only simulation that includes an effective ionization source to separate the effect of sourcing from charge exchange collisions. It is observed that sourcing accounts for many features of the simulated SOL with neutrals, including density and temperature magnitudes and reduced normalized density fluctuations, but differences persist. In particular, a flatter density profile results due to changes in parallel transport when neutral collisions are included, illustrating the importance of neutral drag on global plasma properties. An analysis of coherent turbulent structures, or blobs, in these simulations demonstrates the case with neutrals has slower and larger blobs. Here, a series of seeded blob simulations corroborates the blob velocity observation. In general, the blob motion does not contribute significantly to radial transport in these simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Complete collision data set for electrons scattering on molecular hydrogen and its isotopologues: IV. Vibrationally-resolved ionization of the ground and excited electronic states

Here, we present a comprehensive set of vibrationally-resolved cross sections for electron-impact ionization of molecular hydrogen and its isotopologues (H 2 , D 2 , T 2 , HD, HT, and DT) in both the ground and excited electronic states. We apply the adiabatic-nuclei molecular convergent close-coupling (MCCC) method to calculate cross sections from threshold to 1000 eV for ionization of the ground and excited vibrational levels of the X 1 Σ$^{+}_{g}$, B 1 Σ$^{+}_{u}$, C 1 π u , EF 1 Σ$^{+}_{g}$, a 3 Σ$^{+}_{g}$, and c 3 π u electronic states, representing all states with united-atoms-limit principle quantum number n=1–2. The cross sections are presented in graphical form and provided as both numerical values and analytic fit functions in supplementary data files. The data can also be downloaded from the MCCC database at mccc-db.org.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Physics basis for the Wisconsin HTS Axisymmetric Mirror (WHAM)

The Wisconsin high-temperature superconductor axisymmetric mirror experiment (WHAM) will be a high-field platform for prototyping technologies, validating interchange stabilization techniques and benchmarking numerical code performance, enabling the next step up to reactor parameters. A detailed overview of the experimental apparatus and its various subsystems is presented. WHAM will use electron cyclotron heating to ionize and build a dense target plasma for neutral beam injection of fast ions, stabilized by edge-biased sheared flow. At 25 keV injection energies, charge exchange dominates over impact ionization and limits the effectiveness of neutral beam injection fuelling. This paper outlines an iterative technique for self-consistently predicting the neutral beam driven anisotropic ion distribution and its role in the finite beta equilibrium. Beginning with recent work by Egedal et al. ( Nucl. Fusion , vol. 62, no. 12, 2022, p. 126053) on the WHAM geometry, we detail how the FIDASIM code is used to model the charge exchange sources and sinks in the distribution function, and both are combined with an anisotropic magnetohydrodynamic equilibrium solver method to self-consistently reach an equilibrium. We compare this with recent results using the CQL3D code adapted for the mirror geometry, which includes the high-harmonic fast wave heating of fast ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗