Search NASA⌕ Search

SEARCH · Search NASA

Results for “instance selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

In-situ neutron scattering studies of magnetic shape memory alloys under stress, temperature, and magnetic fields

We have utilized the SMARTS engineering neutron diffractometer to study the crystallographic orientation and phase transformations in the ferromagnetic shape memory alloy Ni 2MnGa under conditions of temperature (200-600K), stress (500MPa), and magnetic field (2T). Neutrons are uniquely suited to probe the crystallographic response of materials to external stimuli because of their high penetration, which allows them to sample the bulk of the material (as opposed to the surface) as well as pass through environmental chambers. A single crystal of Ni{sub 5}MnGa was repeatedly thermally cycled through the Austenitic-Martensitic phase transformation under varying conditions of applied stress, magnetic field or both. In-situ neutron diffraction was used to quantitatively monitor the population of the crystallographic variants in the martensitic phase as a function of the external stimuli during cooling. Neutron diffraction was used to monitor variant selection in the Ferromagnetic Shape Memory Alloy Ni{sub 2}Mn Ga during austenitic to martensitic transformation under varying conditions of externally applied stress and magnetic field. Qualitatively, the results were to be expected in this simple example. The shorter and magnetically soft c-axis of the tetragonal martensitic phase aligned with the compressive stress or magnetic field. However, neutron diffraction proved useful in directly quantifying the selection of the preferred variant by external influence. For instance, by quantifying the variant selection, the neutron diffraction results made apparent that the sample 'remembered' a loading cycle following a 'reset' cycle with no external applied stress. Moreover, the power of in-situ neutron diffraction will become more apparent when applied to more complex, less understood, samples such as polycrystalline samples or composite samples.

36 MATERIALS SCIENCE↗

ParaOpt: Automated Application Parameterization and Optimization for the Cloud

The variety of instance types available on cloud platforms offers enormous flexibility to match the requirements of applications with available resources. However, selecting the most suitable instance type and configuring an application to optimally execute on that instance type can be complicated and time-consuming. For example, application parallelism flags must match available cores and problem sizes must be tuned to match available memory. As the search space of application configurations can be enormous, we propose an automated approach, called ParaOpt, to automatically explore and tune application configurations on arbitrary cloud instances. ParaOpt supports arbitrary applications, enables use of custom optimization methods, and can be configured with different optimization targets such as runtime and cost. We evaluate ParaOpt by optimizing genomics, molecular dynamics, and machine learning applications with four types of optimizers. We show with as few as 15 parameterized executions of an application, representing between 1.2%-26.7% of the search space, that ParaOpt is able to identify the optimal configuration in 32.7% of experiments and a near-optimal configuration in 83.2% of cases. As a result of using near-optimal configurations, ParaOpt reduces overall execution time by up to 85.8% when compared with using the default configuration.

Wu, Chaofeng↗

MLP-NN vs Gauss-Newton files

-Input files for randomly selected subset data (30 instances) from primary dipole-dipole forward modeling data.-Inversion results in surfer grid format as well as in .DAT format.-Scatterplots for MLP-NN vs Gauss-Newton present in the excel sheet.

58 GEOSCIENCES↗

A2Cloud‐RF : A random forest based statistical framework to guide resource selection for high‐performance scientific computing on the cloud

Summary This article proposes a random‐forest based A2Cloud framework to match scientific applications with Cloud providers and their instances for high performance. The framework leverages four engines for this task: PERF engine, Cloud trace engine, A2Cloud‐ext engine, and the random forest classifier (RFC) engine. The PERF engine profiles the application to obtain performance characteristics, including the number of single‐precision (SP) floating‐point operations (FLOPs), double‐precision (DP) FLOPs, x87 operations, memory accesses, and disk accesses. The Cloud trace engine obtains the corresponding performance characteristics of the selected Cloud instances including: SP floating point operations per second (FLOPS), DP FLOPS, x87 operations per second, memory bandwidth, and disk bandwidth. The A2Cloud‐ext engine uses the application and Cloud instance characteristics to generate objective scores that represent the application‐to‐Cloud match. The RFC engine uses these objective scores to generate two types of random forests to assist users with rapid analysis: application‐specific random forests (ARF) and application‐class based random forests. The ARF consider only the input application's characteristics to generate a random forest and provide numerical ratings to the selected Cloud instances. To generate the application‐class based random forests, the RFC engine downloads the application profiles and scores of previously tested applications that perform similar to the input application. Using these data, the RFC engine creates a random forest for instance recommendation. We exhaustively test this framework using eight real‐world applications across 12 instances from different Cloud providers. Our tests show significant statistical agreement between the instance ratings given by the framework and the ratings obtained via actual Cloud executions.

Samuel, David↗

Metal-organic framework catalysts for selective cleavage of aryl-ether bonds

The present invention relates to methods of employing a metal-organic framework (MOF) as a catalyst for cleaving chemical bonds. In particular instances, the MOF results in selective bond cleavage that results in hydrogenolyzis. Furthermore, the MOF catalyst can be reused in multiple cycles. Such MOF-based catalysts can be useful, e.g., to convert biomass components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of Highly Selective and Efficient Thiol Derivatization using Selenium Reagents by Mass Spectrometry

Biological thiols are critical physiological components and their detection often involves derivatization. This paper reports a systemic mass spectrometry (MS) investigation of the cleavage of Se-N bond by thiol to form a new Se-S bond, the new selenium chemistry for thiol labeling. Our data shows that the reaction is highly selective, rapid, reversible and efficient. For instance, among twenty amino acids, only cysteine was found to be reactive with Se-N containing reagents and the reaction takes place in seconds. By adding dithiothreitol (DTT), the newly formed Se-S bond of peptides/proteins can be reduced back to free thiol. The high selectivity and excellent reversibility of the reaction provide potential of using this chemistry for selective identification of thiol compounds or enriching and purifying thiol peptides/proteins. In addition, the derivatized thiol peptides have interesting dissociation behavior, which is tunable using different selenium reagents. For example, by introducing an adjacent nucleophilic group into the selenium reagent in the case of using ebselen, the reaction product of ebselen with glutathione (GSH) is easy to lose the selenium tag upon collision-induced dissociation (CID), which is useful to "fish out" those peptides containing free cysteine residues by precursor ion scan. By contrast, the selenium tag of N-(phenylseleno) phthalimide reagent can be stable and survive in CID process, which would be of value in pinpointing thiol location using a top-down proteomic approach. Also, the high conversion yield of the reaction allows the counting of total number of thiol in proteins. We believe that ebselen or N-(phenylseleno) phthalimide as tagging thiol-protein reagents will have important applications in both qualitative and quantitative analysis of different thiol-proteins derived from living cells by MS method.

59 BASIC BIOLOGICAL SCIENCES↗

The waiting time problem in a model hominin population

Functional information is normally communicated using specific, context-dependent strings of symbolic characters. This is true within the human realm (texts and computer programs), and also within the biological realm (nucleic acids and proteins). In biology, strings of nucleotides encode much of the information within living cells. How do such information-bearing nucleotide strings arise and become established? This paper uses comprehensive numerical simulation to understand what types of nucleotide strings can realistically be established via the mutation/selection process, given a reasonable timeframe. The program Mendel’s Accountant realistically simulates the mutation/selection process, and was modified so that a starting string of nucleotides could be specified, and a corresponding target string of nucleotides could be specified. We simulated a classic pre-human hominin population of at least 10,000 individuals, with a generation time of 20 years, and with very strong selection (50 % selective elimination). Random point mutations were generated within the starting string. Whenever an instance of the target string arose, all individuals carrying the target string were assigned a specified reproductive advantage. When natural selection had successfully amplified an instance of the target string to the point of fixation, the experiment was halted, and the waiting time statistics were tabulated. Using this methodology we tested the effect of mutation rate, string length, fitness benefit, and population size on waiting time to fixation. Biologically realistic numerical simulations revealed that a population of this type required inordinately long waiting times to establish even the shortest nucleotide strings. To establish a string of two nucleotides required on average 84 million years. To establish a string of five nucleotides required on average 2 billion years. We found that waiting times were reduced by higher mutation rates, stronger fitness benefits, and larger population sizes. However, even using the most generous feasible parameters settings, the waiting time required to establish any specific nucleotide string within this type of population was consistently prohibitive. We show that the waiting time problem is a significant constraint on the macroevolution of the classic hominin population. Routine establishment of specific beneficial strings of two or more nucleotides becomes very problematic.

54 ENVIRONMENTAL SCIENCES↗

Selectivity of nitrate and chloride ions in microporous carbons: the role of anisotropic hydration and applied potentials

Understanding ion transport in porous carbons is critical for a wide range of technologies, including supercapacitors and capacitive deionization for water desalination, yet many details remain poorly understood. For instance, an atomistic understanding of how ion selectivity is influenced by the molecular shape of ions, morphology of the micropores and applied voltages is largely lacking. In this work, we combined molecular dynamics simulations with enhanced sampling methods to elucidate the mechanism of nitrate and chloride selectivity in subnanometer graphene slit-pores. We demonstrate that nitrate is preferentially adsorbed over chloride in the slit-like micropores. This preferential adsorption was found to stem from the weaker hydration energy and unique anisotropy of the ion solvation of nitrate. Beside the effects of ion dehydration, we found that applied potential plays an important role in determining the ion selectivity, leading to a lower selectivity of nitrate over chloride at a high applied potential. We conclude that the measured ion selectivity results from a complex interplay between voltage, confinement, and specific ion effects-including ion shape and local hydration structure.

36 MATERIALS SCIENCE↗

Method and system for reducing device performance degradation of organic devices

Methods and systems for reducing the deleterious effects of gate bias stress on the drain current of an organic device, such as an organic thin film transistor, are provided. In a particular aspect, the organic layer of an organic device is illuminated with light having characteristics selected to reduce the gate bias voltage effects on the drain current of the organic device. For instance, the wavelength and intensity of the light are selected to provide a desired recovery of drain current of the organic device. If the characteristics of the light are appropriately matched to the organic device, recovery of the deleterious effects caused by gate bias voltage stress effects on the drain current of the organic device can be achieved. In a particular aspect, the organic device is selectively illuminated with light to operate the organic device in multiple modes of operation.

36 MATERIALS SCIENCE↗

Theoretical assessments of Pd–PdO phase transformation and its impacts on H 2 O 2 synthesis and decomposition pathways

The direct synthesis of H 2 O 2 from O 2 and H 2 provides a green pathway to produce H 2 O 2 , a popular industrial oxidant. Here, in this study, we theoretically investigate the effects of Pd oxidation states, coordination environments, and particle sizes on primary H 2 O 2 selectivities, assessed by calculating the ratio of rate constants for the formation of H 2 O 2 (via OOH* reduction; k O–H ) and the decomposition of OOH* (via O–O cleavage; k O–O ). For Pd metals, the k O–H /k O–O ratio decreased from 10 -4 for Pd(111) to 10 -10 for the Pd 13 cluster at 300 K, indicating poorer H 2 O 2 selectivity as Pd particle size decreases and low primary selectivities for H 2 O 2 overall. As the oxygen chemical potential increases and metals form surface and bulk oxides, the perturbation of Pd–Pd ensemble sites by lattice O atoms results in selectivities that become dramatically higher than unity. For instance, at 300 K, the k O–H /k O–O ratio increases significantly from 10 -4 to 10 9 to 10 16 as Pd(111) oxidizes to Pd 5 O 4 /Pd(111) and to PdO(100), respectively. In contrast, such selectivity enhancements are not observed for surface and bulk oxides that persistently contain rows of more metallic, undercoordinated Pd–Pd ensemble sites, such as PdO(101)/Pd(100) and PdO(101). These Pd–Pd ensembles are also absent when smaller Pd nanoparticles fully oxidize, indicating that smaller PdO clusters can be more selective for H 2 O 2 synthesis. These trends for primary H 2 O 2 selectivities were found to inversely correlate with trends for H 2 O 2 decomposition rates via O–O bond cleavage, demonstrating that catalysts with high primary H 2 O 2 selectivity can also hinder H 2 O 2 decomposition. Ab initio thermodynamic calculations are used to estimate the thermodynamically favored phase among Pd, PdO/Pd and PdO in O 2 , H 2 O 2 /H 2 O, and O 2 /H 2 environments. These results are combined to show that smaller Pd nanoparticles are more prone to be oxidized at lower oxygen chemical potentials, upon which they become more selective than larger Pd particles for H 2 O 2 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A case study evaluating the portability of an executable computable phenotype algorithm across multiple institutions and electronic health record environments

Abstract Electronic health record (EHR) algorithms for defining patient cohorts are commonly shared as free-text descriptions that require human intervention both to interpret and implement. We developed the Phenotype Execution and Modeling Architecture (PhEMA, http://projectphema.org) to author and execute standardized computable phenotype algorithms. With PhEMA, we converted an algorithm for benign prostatic hyperplasia, developed for the electronic Medical Records and Genomics network (eMERGE), into a standards-based computable format. Eight sites (7 within eMERGE) received the computable algorithm, and 6 successfully executed it against local data warehouses and/or i2b2 instances. Blinded random chart review of cases selected by the computable algorithm shows PPV ≥90%, and 3 out of 5 sites had >90% overlap of selected cases when comparing the computable algorithm to their original eMERGE implementation. This case study demonstrates potential use of PhEMA computable representations to automate phenotyping across different EHR systems, but also highlights some ongoing challenges.

Pacheco, Jennifer A.↗

OSCA1 is an osmotic specific sensor: a method to distinguish Ca 2+ -mediated osmotic and ionic perception

Genetic mutants defective in stimulus-induced Ca 2+ increases have been gradually isolated, allowing the identification of cell-surface sensors/receptors, such as the osmosensor OSCA1. However, determining the Ca 2+ -signaling specificity to various stimuli in these mutants remains a challenge. For instance, less is known about the exact selectivity between osmotic and ionic stresses in the osca1 mutant. Here, we have developed a method to distinguish the osmotic and ionic effects by analyzing Ca 2+ increases, and demonstrated that osca1 is impaired primarily in Ca 2+ increases induced by the osmotic but not ionic stress. We recorded Ca 2+ increases induced by sorbitol (osmotic effect, OE) and NaCl/CaCl 2 (OE + ionic effect, IE) in Arabidopsis wild-type and osca1 seedlings. Here we assumed the NaCl/CaCl 2 total effect (TE) = OE + IE, then developed procedures for Ca 2+ imaging, image analysis and mathematic fitting/modeling, and found osca1 defects mainly in OE. The osmotic specificity of osca1 suggests that osmotic and ionic perceptions are independent. The precise estimation of these two stress effects is applicable not only to new Ca 2+ -signaling mutants with distinct stimulus specificity but also the complex Ca 2+ signaling crosstalk among multiple concurrent stresses that occur naturally, and will enable us to specifically fine tune multiple signal pathways to improve crop yields.

Arabidopsis↗

ninterp: N-dimensional interpolation Rust crate [SWR-25-25]

The ninterp crate provides multivariate interpolation over a regular, sorted, nonrepeating grid of any dimensionality. A variety of interpolation strategies are implemented, however more are likely to be added. Extrapolation beyond the range of the supplied coordinates is supported for 1-D linear interpolators, using the slope of the nearby points. There are hard-coded interpolators for lower dimensionalities (up to N = 3) for better runtime performance. All interpolation is handled through instances of the Interpolator enum, with the selected tuple variant containing relevant data. Interpolation is executed by calling Interpolator::interpolate.

Carow, Kyle↗

Medium Effects are as Important as Catalyst Design for Selectivity in Electrocatalytic Oxygen Reduction by Iron-porphyrin Complexes

Several substituted iron porphyrin com-plexes were evaluated for oxygen reduction reaction (ORR) electrocatalysis in different homogeneous and heterogeneous media. The selectivity for 4-electron re-duction to H2O vs. 2-electron reduction to H2O2 varies substantially from one medium to another for a given catalyst. In many cases, the influence of the medium in which the catalyst is evaluated has a larger effect on the observed selectivity than the factors attributable to chemical modification of the catalyst. For instance, introduction of potential proton relays has variable effects depending on the catalyst medium. Thus, comparisons of ORR selectivity results need to be interpreted with caution, as the catalysis is a property not just of the catalyst, but also of the larger mesoscale environment be-yond the catalyst. Still, in all the direct pairwise comparisons in the same medium, the catalysts with potential proton relays have similar or better selectivity for the preferred 4e– path. This work was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

Rigsby, Matthew L.↗

Patient radiation dose audits for fluoroscopically guided interventional procedures

Purpose: Quality management for any use of medical x-ray imaging should include monitoring of radiation dose. Fluoroscopically guided interventional (FGI) procedures are inherently clinically variable and have the potential for inducing deterministic injuries in patients. The use of a conventional diagnostic reference level is not appropriate for FGI procedures. A similar but more detailed quality process for management of radiation dose in FGI procedures is described. Methods: A method that takes into account both the inherent variability of FGI procedures and the risk of deterministic injuries from these procedures is suggested. The substantial radiation dose level (SRDL) is an absolute action level (with regard to patient follow-up) below which skin injury is highly unlikely and above which skin injury is possible. The quality process for FGI procedures collects data from all instances of a given procedure from a number of facilities into an advisory data set (ADS). An individual facility collects a facility data set (FDS) comprised of all instances of the same procedure at that facility. The individual FDS is then compared to the multifacility ADS with regard to the overall shape of the dose distributions and the percent of instances in both the ADS and the FDS that exceed the SRDL. Results: Samples of an ADS and FDS for percutaneous coronary intervention, using the dose metric of reference air kerma (K{sub a,r}) (i.e., the cumulative air kerma at the reference point), are used to illustrate the proposed quality process for FGI procedures. Investigation is warranted whenever the FDS is noticeably different from the ADS for the specific FGI procedure and particularly in two circumstances: (1) When the facility's local median K{sub a,r} exceeds the 75th percentile of the ADS and (2) when the percent of instances where K{sub a,r} exceeds the facility-selected SRDL is greater for the FDS than for the ADS. Conclusions: Analysis of the two data sets (ADS and FDS) and of the percent of instances that exceed the SRDL provides a means for the facility to better manage radiation dose (and therefore both deterministic and stochastic radiation risk) to the patient during FGI procedures.

60 APPLIED LIFE SCIENCES↗

WE-G-BRD-06: Volumetric Cine MRI (VC-MRI) Estimated Based On Prior Knowledge for On-Board Target Localization

Purpose: To develop a technique to generate on-board VC-MRI using patient prior 4D-MRI, motion modeling and on-board 2D-cine MRI for real-time 3D target verification of liver and lung radiotherapy. Methods: The end-expiration phase images of a 4D-MRI acquired during patient simulation are used as patient prior images. Principal component analysis (PCA) is used to extract 3 major respiratory deformation patterns from the Deformation Field Maps (DFMs) generated between end-expiration phase and all other phases. On-board 2D-cine MRI images are acquired in the axial view. The on-board VC-MRI at any instant is considered as a deformation of the prior MRI at the end-expiration phase. The DFM is represented as a linear combination of the 3 major deformation patterns. The coefficients of the deformation patterns are solved by matching the corresponding 2D slice of the estimated VC-MRI with the acquired single 2D-cine MRI. The method was evaluated using both XCAT (a computerized patient model) simulation of lung cancer patients and MRI data from a real liver cancer patient. The 3D-MRI at every phase except end-expiration phase was used to simulate the ground-truth on-board VC-MRI at different instances, and the center-tumor slice was selected to simulate the on-board 2D-cine images. Results: Image subtraction of ground truth with estimated on-board VC-MRI shows fewer differences than image subtraction of ground truth with prior image. Excellent agreement between profiles was achieved. The normalized cross correlation coefficients between the estimated and ground-truth in the axial, coronal and sagittal views for each time step were >= 0.982, 0.905, 0.961 for XCAT data and >= 0.998, 0.911, 0.9541 for patient data. For XCAT data, the maximum-Volume-Percent-Difference between ground-truth and estimated tumor volumes was 1.6% and the maximum-Center-of-Mass-Shift was 0.9 mm. Conclusion: Preliminary studies demonstrated the feasibility to estimate real-time VC-MRI for on-board target localization before or during radiotherapy treatments. National Institutes of Health Grant No. R01-CA184173; Varian Medical System.

60 APPLIED LIFE SCIENCES↗

The mechanism for acetate formation in electrochemical CO (2) reduction on Cu: selectivity with potential, pH, and nanostructuring

Nanostructured Cu catalysts have increased the selectivities and geometric activities for high value C–C coupled (C 2 ) products (ethylene, ethanol, and acetate) in the electrochemical CO (2) reduction reaction (CO (2) RR). The selectivity among the high-value C 2 products is also altered, where for instance the yield of acetate increases with alkalinity and is dependent on the catalyst morphology. The reaction mechanisms behind the selectivity towards acetate vs. other C 2 products remain controversial. In this work, we elucidate the reaction mechanism for acetate formation by using ab initio simulations, a coupled kinetic-transport model, and loading dependent experiments. We find that trends in acetate selectivity can be rationalized from variations in electrolyte pH and the local mass transport properties of the catalyst and not from changes in Cu's intrinsic activity. The selectivity mechanism originates from the transport of ketene, a stable (closed shell) intermediate, away from the catalyst surface into solution where it reacts to form acetate. While this type of mechanism has not yet been discussed in the CO (2) RR, variants of it may explain similar selectivity fluctuations observed for other stable intermediates like CO and acetaldehyde. Our proposed mechanism suggests that acetate selectivity increases with increasing pH, decreasing catalyst roughness and significantly varies with the applied potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical device having electrolyte including disiloxane

One example of the disiloxanes include a backbone with a first silicon and a second silicon. The first silicon is linked to a first substituent selected from a group consisting of: a first side chain that includes a cyclic carbonate moiety; a first side chain that includes a poly(alkylene oxide) moiety; and a first cross link links the disiloxane to a second siloxane and that includes a poly(alkylene oxide) moiety. In some instance, the second silicon is linked to a second substituent selected from a group consisting of: a second side chain that includes a cyclic carbonate moiety, and a second side chain that includes a poly(alkylene oxide) moiety.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗