Determination of phosphite (HPO3−2) by a new IC/MS/MS method using an 18O-labeled HPO3−2 internal standard
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “internal standards”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Revised International Standard for Gearboxes in Wind Turbine Systems
Gearbox and wind turbine design and application standards have contributed significantly to improvements in reliability over the past two decades. The International Electrotechnical Commission (IEC) 61400-4 standard of wind turbine gearbox design is currently being revised by a joint working group (JWG) of experts in IEC TC 88 (wind energy) and International Organization for Standardization (ISO) TC60 (gears) to further that effort. Experts from ISO TC4 (rolling bearings) and ISO TC28 (lubricants) have actively participated. This revision has implemented lessons learned from industry use of edition 1 since its publication in 2012. The main document, IEC 61400-4, was pared down to essential design requirements and application-specific recommendations along with a design verification framework. The JWG leveraged concurrent development of other standards, such as IEC 61400-8 on wind turbine structures, to replace edition 1 content. These are described along with how this works with the IEC Renewable Energy certification scheme for wind turbines (IECRE-WE). The JWG recognized the interest in maintaining informative parts of edition 1 including annexes on wind turbine architecture and loads, bearing and gear arrangements, bearing selection, lubrication system descriptions and lubricant performance recommendations. This information was retained in two technical reports: IEC/TR 61400-4-2 Lubrication and IEC/TR 61400-4-3 Explanatory Notes. Additionally, a technical specification, IEC/TS 61400-4-1, was drafted to provide a reliability calculation method for comparing different design options or conditions. Salient elements of these documents are described. All four documents were recently distributed for IEC/ISO review, ballot, and comment. Publication is expected in 2023.
gearbox↗
A Revised International Standard for Gearboxes in Wind Turbine Systems: Preprint
Gearbox and wind turbine design and application standards have contributed significantly to improvements in reliability over the past two decades. The International Electrotechnical Commission (IEC) 61400-4 standard of wind turbine gearbox design is currently being revised by a joint working group (JWG) of experts in IEC TC 88 (wind energy) and International Organization for Standardization (ISO) TC60 (gears) to further that effort. Experts from ISO TC4 (rolling bearings) and ISO TC28 (lubricants) have actively participated. This revision has implemented lessons learned from industry use of edition 1 since its publication in 2012. The main document, IEC 61400-4, was pared down to essential design requirements and application-specific recommendations along with a design verification framework. The JWG leveraged concurrent development of other standards, such as IEC 61400-8 on wind turbine structures, to replace edition 1 content. These are described along with how this works with the IEC Renewable Energy certification scheme for wind turbines (IECRE-WE). The JWG recognized the interest in maintaining informative parts of edition 1 including annexes on wind turbine architecture and loads, bearing and gear arrangements, bearing selection, lubrication system descriptions and lubricant performance recommendations. This information was retained in two technical reports: IEC/TR 61400-4-2 Lubrication and IEC/TR 61400-4-3 Explanatory Notes. Additionally, a technical specification, IEC/TS 61400-4-1, was drafted to provide a reliability calculation method for comparing different design options or conditions. Salient elements of these documents are described. All four documents were recently distributed for IEC/ISO review, ballot, and comment. Publication is expected in 2023.
ENGINEERING,WIND ENERGY↗
Establishing and Verifying the Traceability of Remote-Sensing Measurements to International Standards
This viewgraph presentation reviews the principles of establishing and verifying the traceability of remote sensing measurements to national and international scales. Doing this allows comparisons to be made independent of time or locale, and improves understanding of instrument performance, provides confidence in the accuracy of the measurements, improves measurement accuracy and helps contractors understand and meet agency requirements, protecting contractor and customer.
Fraser, Gerald T.↗
Evolutionary Paths to Internationally-Standardized Space Internetworking
The space community is now poised at the start of an exciting new era of space exploration, where many different organization will be launching spacecraft to investigate nearby bodies, such as the Moon and Mars. International fleets of spacecraft are thus likely to begin to fly and interoperability will often become a mission-enabling technology. These fleets will require a mix of powerful data communications capabilities to be available, ranging from conventional point-to-point architectures to new configurations supporting internetworked operations. This paper reviews the various CCSDS capabilities to support fully-standardized in-space internetworking, and outlines a strategy for smoothly evolving into the new era with minimum impact on the highly successful installed base of CCSDS-compatible systems, which are now widely deployed across the international space community.
Space Internet↗
Development of a proposed international standard for certification of aircraft to High Intensity Radiated Fields (HIRF)
Avionic systems performing critical functions in modern aircraft are potentially susceptible to the hazards of electromagnetic radiation from ground and airborne transmitters. The Federal Aviation Administration (FAA) requested that the Society of Automotive Engineers (SAE) coordinate the development of procedures and guidance material which can be used during the aircraft certification process to ensure adequate protection against high intensity radiated fields (HIRF). This paper addresses both the technical challenge of drafting a certification procedure and guidance standard as well as the management process used by the SAE subcommittee AE4R to converge a diverse range of opinions by its international membership in the shortest possible time.
Sargent, Noel B.↗
Developing and using international standards for neutron ambient dose equivalent rate meters
Not Available
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Physical and Visual Evaluation of Filters for Direct Observation of the Sun and the International Standard ISO 12312-2:2015
We investigated the compliance of 43 commercially available solar filters (eclipse glasses) with the ISO 12312-2:2015 standard by measuring their spectral transmittances (280–2000 nm) and calculating their luminous, solar ultraviolet A, ultraviolet B, and infrared (IR) transmittances. We also evaluated the filters for usability by observing the full midday Sun and rating the view on a seven-point balanced scale, from “far too dark, details seen only with great difficulty” to “far too light, uncomfortable to view the Sun.” The mean ratings of two observers, one experienced and one inexperienced in solar observing, differed by 0.28 (95% confidence interval of the mean = 0.26). The inexperienced observer tended to be less accepting of high transmittances. All 43 solar filters complied with the UV and IR requirements. Eighteen filters passed the luminous transmittance requirements, and 24 were borderline too light or too dark. Seven of the 15 solar filters with a luminous transmittance darker than the requirement were rated as acceptable. One filter that passed and another that was borderline too light were rated as too light or far too light. The ISO 12312-2 limits derive from welding filter standards and do not represent an appropriate evidence base for direct solar viewing. This work provides the evidence base for a maximum 0.0012% and a minimum 0.00004% luminous transmittance for solar filters. The results of this study also support the use of welding filters between shades 12 and 16. Lighter welding filters are more acceptable than solar filters of the same luminous transmittance.
79 ASTRONOMY AND ASTROPHYSICS↗
Ride quality and international standard ISO 2631 (Guide for the evaluation of human exposure to whole-body vibration)
The evolution of the standard, which is aimed at promoting research and production of more data, and providing some design guidance, is outlined and its contents summarized. Some of the assumptions and information on which it is based are analyzed. Its application to vehicle ride quality is considered in the context of the safety, efficiency and comfort of crew and passengers. The importance of establishing the precise criteria against which vibration limits are required is underlined, particularly the difficulties of first defining comfort and then postulating appropriate levels. Some current and future work related to improving the standard is outlined and additional suggestions offered.
Allen, G. R.↗
Survey of Federal, National, and International standards applicable to the NASA applications data services
An applications data service (ADS) was developed to meet the challenges in the data access and integration. The ADS provides a common service to locate and access applications data electronically and integrate the cross correlative data sets required by multiple users. Its catalog and network services increase data visibility as well as provide the data in a more rapid manner and a usable form.
Kuch, T.↗
International standards activities in image data compression
Integrated Services Digital Network (ISDN); coding for color TV, video conferencing, video conferencing/telephone, and still color images; ISO color image coding standard; and ISO still picture standard are briefly discussed. This presentation is represented by viewgraphs only.
Haskell, Barry↗
International standardization of space communications
Explore the source record for details and available documents.
space communications↗
International Standard Payload Rack Accommodations Aboard Space Station Freedom
Explore the source record for details and available documents.
experimental hardware interchangeable ISPRs↗
International Standards for Properties and Performance of Advanced Ceramics - 30 years of Excellence
Mechanical and physical properties/performance of brittle bodies (e.g., advanced ceramics and glasses) can be difficult to measure correctly unless the proper techniques are used. For three decades, ASTM Committee C28 on Advanced Ceramics, has developed numerous full-consensus standards (e.g., test methods, practices, guides, terminology) to measure various properties and performance of a monolithic and composite ceramics and coatings that, in some cases, may be applicable to glasses. These standards give the "what, how, how not, why, why not, etc." for many mechanical, physical, thermal, properties and performance of advanced ceramics. Use of these standards provides accurate, reliable, repeatable and complete data. Involvement in ASTM Committee C28 has included users, producers, researchers, designers, academicians, etc. who write, continually update, and validate through round robin test programmes, more than 45 standards in the 30 years since the Committee's inception in 1986. Included in this poster is a pictogram of the ASTM Committee C28 standards and how to obtain them either as i) individual copies with full details or ii) a complete collection in one volume. A listing of other ASTM committees of interest is included. In addition, some examples of the tangible benefits of standards for advanced ceramics are employed to demonstrate their practical application.
composites↗
ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics-Three Decades of High-Quality, Technically-Rigorous Normalization
Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high-quality, technically-rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards contain testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards are used to generate accurate, reliable, repeatable and complete data. Within Committee C28, users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, 50 standards since the Committee's founding in 1986. This paper provides a detailed retrospective of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of standards for advanced ceramics to demonstrate their practical applications.
properties↗
ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics, Three Decades of High-quality, Technically-rigorous Normalization
Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high quality, rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards provide accurate, reliable, repeatable and complete data. Within Committee C28 users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, nearly 50 standards since the Committees founding in 1986. This paper provides a retrospective review of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of advanced ceramics standards to demonstrate their practical applications.
properties↗
Enabling Simulation Interoperability between International Standards in the Space Domain
Today, the design and development of space systems are conducted cooperatively by historical space agencies in this area such as NASA, ESA, Roscosmos, and JAXA together with their industrial partners. The space system lifecycle is characterized by high costs, uncertain conditions, and dangerous scenarios. To mitigate these issues, space agencies rely heavily on Modelling and Simulation as a key technology to support the analysis, design, and operation of space systems. To support large-scale distributed simulations, the scientific community has developed several standards to support the reuse and interoperability of simulation models such as IEEE 1516 High-Level Architecture (HLA), Real-time Platform Reference Federation Object Model (RPR FOM), Simulation Model Portability (SMP), and the novel Space Reference Federation Object Model (SpaceFOM). While the SpaceFOM standard has been specifically conceptualized for handling space systems, the other ones are more general-purpose and can be used to design and simulate generic complex systems. As a consequence, there is a lake of rules and guidelines to enable interoperability among these standards. The paper presents solutions and experiences for enabling interoperability and transferability of HLA, RPR FOM, and SMP simulation models with SpaceFOM.
Simulation↗