Search NASA⌕ Search

SEARCH · Search NASA

Results for “interval analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Determination of longitudinal aerodynamic derivatives using flight data from an icing research aircraft

A flight test was performed with the NASA Lewis Research Center's DH-6 icing research aircraft. The purpose was to employ a flight test procedure and data analysis method, to determine the accuracy with which the effects of ice on aircraft stability and control could be measured. For simplicity, flight testing was restricted to the short period longitudinal mode. Two flights were flown in a clean (baseline) configuration, and two flights were flown with simulated horizontal tail ice. Forty-five repeat doublet maneuvers were performed in each of four test configurations, at a given trim speed, to determine the ensemble variation of the estimated stability and control derivatives. Additional maneuvers were also performed in each configuration, to determine the variation in the longitudinal derivative estimates over a wide range of trim speeds. Stability and control derivatives were estimated by a Modified Stepwise Regression (MSR) technique. A measure of the confidence in the derivative estimates was obtained by comparing the standard error for the ensemble of repeat maneuvers, to the average of the estimated standard errors predicted by the MSR program. A multiplicative relationship was determined between the ensemble standard error, and the averaged program standard errors. In addition, a 95 percent confidence interval analysis was performed for the elevator effectiveness estimates, C sub m sub delta e. This analysis identified the speed range where changes in C sub m sub delta e could be attributed to icing effects. The magnitude of icing effects on the derivative estimates were strongly dependent on flight speed and aircraft wing flap configuration. With wing flaps up, the estimated derivatives were degraded most at lower speeds corresponding to that configuration. With wing flaps extended to 10 degrees, the estimated derivatives were degraded most at the higher corresponding speeds. The effects of icing on the changes in longitudinal stability and control derivat

Ranaudo, R. J.↗

The Effect of Persistent Heavy Metal Exposure on Some Antioxidant Enzyme Activities and Lipid Peroxidation of the Freshwater snail, Lymnaea natalensis

This study investigated the effect of persistent heavy metal exposure on the activity of superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx) of the freshwater snail, Lymnaea natalensis. Malondialdehyde (MDA) levels were also measured as an index of lipid peroxidation. The snails were exposed to cadmium, copper, lead and mercury for a total of 28 days at 0.1 mg/L, 0.1 mg/L, 0.2 mg/L and 0.1 mg/L respectively. Samples were collected at 1, 7, 14, 21 and 28 days intervals. Analysis of SOD showed significant initial increases in enzyme activity following exposure to copper, lead and mercury, while cadmium exposures caused increases from Day 14 onwards. Copper, cadmium and lead caused significant initial increases in CAT activity and mercury caused an increase only on Day 28. Copper caused a significant increase in GPx activity on Day 28 while MDA levels diminished significantly at Days 7–28. Similarly, cadmium caused significant increases of GPx activity on Day 28 whereas MDA levels were significantly reduced. Lead also caused a significant increase in GPx activity on Days 14–28 whilst no significant changes occurred in MDA levels. Mercury exposures caused significant increases in GPx activity on Days 7 and 21, whilst MDA levels were significantly reduced on Days 7 and 14. These findings suggest that persistent exposure of snails to heavy metals induces the antioxidant defence system, and decreases lipid peroxidation.

54 ENVIRONMENTAL SCIENCES↗

Dynamic symmetry of indirectly driven inertial confinement fusion capsules on the National Ignition Facility

In order to achieve ignition using inertial confinement fusion it is important to control the growth of low-mode asymmetries as the capsule is compressed. Understanding the time-dependent evolution of the shape of the hot spot and surrounding fuel layer is crucial to optimizing implosion performance. A design and experimental campaign to examine sources of asymmetry and to quantify symmetry throughout the implosion has been developed and executed on the National Ignition Facility (NIF) [E. I. Moses et al., Phys. Plasmas 16, 041006 (2009)]. We have constructed a large simulation database of asymmetries applied during different time intervals. Analysis of the database has shown the need to measure and control the hot-spot shape, areal density distribution, and symmetry swings during the implosion. The shape of the hot spot during final stagnation is measured using time-resolved imaging of the self-emission, and information on the shape of the fuel at stagnation can be obtained from Compton radiography [R. Tommasini et al., Phys. Plasmas 18, 056309 (2011)]. For the first time on NIF, two-dimensional inflight radiographs of gas-filled and cryogenic fuel layered capsules have been measured to infer the symmetry of the radiation drive on the capsule. These results have been used to modify the hohlraum geometry and the wavelength tuning to improve the inflight implosion symmetry. We have also expanded our shock timing capabilities by the addition of extra mirrors inside the re-entrant cone to allow the simultaneous measurement of shock symmetry in three locations on a single shot, providing asymmetry information up to Legendre mode 4. By diagnosing the shape at nearly every step of the implosion, we estimate that shape has typically reduced fusion yield by about 50% in ignition experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FPDetect: Efficient Reasoning About Stencil Programs Using Selective Direct Evaluation

We present FPDetect, a low-overhead approach for detecting logical errors and soft errors affecting stencil computations without generating false positives. We develop an offline analysis that tightly estimates the number of floating-point bits preserved across stencil applications. This estimate rigorously bounds the values expected in the data space of the computation. Violations of this bound can be attributed with certainty to errors. FPDetect helps synthesize error detectors customized for user-specified levels of accuracy and coverage. FPDetect also enables overhead reduction techniques based on deploying these detectors coarsely in space and time. Experimental evaluations demonstrate the practicality of our approach.

97 MATHEMATICS AND COMPUTING↗

Automatic recognition of vector and parallel operations in a higher level language

A compiler for recognizing statements of a FORTRAN program which are suited for fast execution on a parallel or pipeline machine such as Illiac-4, Star or ASC is described. The technique employs interval analysis to provide flow information to the vector/parallel recognizer. Where profitable the compiler changes scalar variables to subscripted variables. The output of the compiler is an extension to FORTRAN which shows parallel and vector operations explicitly.

Schneck, P. B.↗

Voyager 1 assessment of Jupiter's planetary magnetic field

An estimate of Jupiter's planetary magnetic field is obtained from the Voyager 1 observations of the Jovian magnetosphere. An explicit model for the magnetodisc current system is combined with a spherical harmonic model of the planetary field with both sets of parameters determined simultaneously using a nonlinear generalized inverse methodology. The resulting model fits the observations extremely well throughout the analysis interval (r 20 Jovian radii). The Jovian internal field model obtained from the Voyager 1 data is very similar to the octopole Pioneer 11 models. The best fitting magnetodisc lies in the centrifugal equator, 2/3 of the way between the rotational and magnetic equators, as appropriate for centrifugal loading of the magnetosphere by a cold plasma.

Connerney, J. E. P.↗

A Comparison of Three Curve Intersection Algorithms

An empirical comparison is made between three algorithms for computing the points of intersection of two planar Bezier curves. The algorithms compared are: the well known Bezier subdivision algorithm, which is discussed in Lane 80; a subdivision algorithm based on interval analysis due to Koparkar and Mudur; and an algorithm due to Sederberg, Anderson and Goldman which reduces the problem to one of finding the roots of a univariate polynomial. The details of these three algorithms are presented in their respective references.

Sederberg, T. W.↗

Projection filters for modal parameter estimate for flexible structures

Single-mode projection filters are developed for eigensystem parameter estimates from both analytical results and test data. Explicit formulations of these projection filters are derived using the pseudoinverse matrices of the controllability and observability matrices in general use. A global minimum optimization algorithm is developed to update the filter parameters by using interval analysis method. Modal parameters can be attracted and updated in the global sense within a specific region by passing the experimental data through the projection filters. For illustration of this method, a numerical example is shown by using a one-dimensional global optimization algorithm to estimate model frequencies and dampings.

Huang, Jen-Kuang↗

Single-mode projection filters for identification and state estimation of flexible structures

Single-mode projection filters are developed for eigensystem parameter identification and state estimation from both analytical results and test data. Explicit formulations of these projection filters are derived using the pseudoinverse matrices of the controllabilty and observability matrices in the general sense. A global minimum optimization algorithm is developed to update the filter parameters by using the interval analysis method. Modal parameters can be identified and updated in the global sense within a specified region of parameters by passing the experimental data through the projection filters. For illustration of this new approach, a numerical example is shown by using a one-dimensional global optimization algorithm to estimate modal frequencies and damping.

Huang, Jen-Kuang↗

Single-Mode Projection Filters for Modal Parameter Identification for Flexible Structures

Single-mode projection filters are developed for eigensystem parameter identification from both analytical results and test data. Explicit formulations of these projection filters are derived using the orthogonal matrices of the controllability and observability matrices in the general sense. A global minimum optimization algorithm is applied to update the filter parameters by using the interval analysis method. The updated modal parameters represent the characteristics of the test data. For illustration of this new approach, a numerical simulation for the MAST beam structure is shown by using a one-dimensional global optimization algorithm to identify modal frequencies and damping. Another numerical simulation of a ten-mode structure is also presented by using a two-dimensional global optimization algorithm to illustrate the feasibility of the new method. The projection filters are practical for parallel processing implementation.

Huang, Jen-Kuang↗

Fast-dynamo action in unsteady flows and maps in three dimensions

Unsteady fast-dynamo action is obtained in a family of stretch-fold-shear maps applied to a spatially periodic magnetic field in three dimensions. Exponential growth of a mean field in the limit of vanishing diffusivity is demonstrated by a numerical method which alternates instantaneous deformations with molecular diffusion over a finite time interval. Analysis indicates that the dynamo is a coherent feature of the large scales, essentially independent of the cascade of structure to small scales.

Bayly, B. J.↗

Single-mode projection filters for modal parameter identification for flexible structures

Single-mode projection filters are developed for eigensystem parameter identification from both analytical results and test data. Explicit formulations of these projection filters are derived using the orthogonal matrices of the controllability and observability matrices in the general sense. A global minimum optimization algorithm is applied to update the filter parameters by using the interval analysis method. The updated modal parameters represent the characteristics of the test data. For illustration of this new approach, a numerical simulation for the MAST beam structure is shown by using a one-dimensional global optimization algorithm to identify modal frequencies and damping. The projection filters are practical for parallel processing implementation.

Huang, Jen-Kuang↗

Interval prediction in structural dynamic analysis

Methods for assessing the predictive accuracy of structural dynamic models are examined with attention given to the effects of modal mass, stiffness, and damping uncertainties. The methods are based on a nondeterministic analysis called 'interval prediction' in which interval variables are used to describe parameters and responses that are unknown. Statistical databases for generic modeling uncertainties are derived from experimental data and incorporated analytically to evaluate responses. Covariance matrices of modal mass, stiffness, and damping parameters are propagated numerically in models of large space structures by means of three methods. The test data tend to fall within the predicted intervals of uncertainty determined by the statistical databases. The present findings demonstrate the suitability of using data from previously analyzed and tested space structures for assessing the predictive accuracy of an analytical model.

Hasselman, Timothy K.↗

Modal identification using single-mode projection filters and comparison with ERA and MLE results

The Single-Mode Projection Filter (SPF) is a newly developed algorithm for eigensystem parameter identification from both analytical results and test data. The SPF is formulated with a single mode only and practical for parallel processing implementation. Explicit formulations of SPF are derived for the multi-input multi-output (MIMO) system by using the orthogonal matrices of the controllability and observability matrices in the general sense. The modal parameters of SPF are initially obtained from an analytical model in modal space. The experimental data are then processed through SPF to update its modal parameters and to minimize a cost function defined by the norm of an error matrix. The updated modal parameters represent the characteristics of the test data. A two-dimensional global minimum optimization algorithm is developed and applied for the filter update by using the interval analysis method. The SPF is developed based on a single-mode subsystem and identifies only one modal frequency and one modal damping within a specified region. For an n-modes structure, n SPF can be implemented for parallel processing to reduce the computational burden. The SPF is applied to analyze the simulated data for the MAST beam structure. The estimated modal parameters are comparable to those from the Eigensystem Realization Algorithm (ERA) and repeated modal frequencies are identified. The modal analysis of the Spacecraft Control Laboratory Experiment (SCOLE) data is also performed by using the ERA and the Maximum Likelihood Estimate (MLE). The result shows that the first five modal frequencies are very close from ERA and MLE. However, there are slight disparities in the damping rates and the computational burdens are quite different among these two algorithms.

Huang, Jen-Kuang↗

High charge state carbon and oxygen ions in Earth's equatorial quasi-trapping region

Observations of energetic (1.5 - 300 keV/e) medium-to-high charge state (+3 less than or equal to Q less than or equal to +7) solar wind origin C and O ions made in the quasi-trapping region (QTR) of Earth's magnetosphere are compared to ion trajectories calculated in model equatorial magnetospheric magnetic and electric fields. These comparisons indicate that solar wind ions entering the QTR on the nightside as an energetic component of the plasma sheet exit the region on the dayside, experiencing little or no charge exchange on the way. Measurements made by the CHarge Energy Mass (CHEM) ion spectrometer on board the Active Magnetospheric Particle Tracer Explorer/Charge Composition Explorer (AMPTE/CCE) spacecraft at 7 less than L less than 9 from September 1984 to January 1989 are the source of the new results contained herein: quantitative long-term determination of number densities, average energies, energy spectra, local time distributions, and their variation with geomagnetic disturbance level as indexed by Kp. Solar wind primaries (ions with charge states unchanged) and their secondaries (ions with generally lower charge states produced from primaries in the magnetosphere via charge exchange)are observed throughout the QTR and have distinctly different local time variations that persist over the entire 4-year analysis interval. During Kp larger than or equal to 3 deg intervals, primary ion (e.g., O(+6)) densities exhibit a pronounced predawn maximum with average energy minimum and a broad near-local-noon density minimum with average energy maximum. Secondary ion (e.g., O(+5)) densities do not have an identifiable predawn peak, rather they have a broad dayside maximum peaked in local morning and a nightside minimum. During Kp less than or equal to 2(-) intervals, primary ion density peaks are less intense, broader in local time extent, and centered near midnight, while secondary ion density local time variations diminish. The long-time-interval baseline helps to refine and extend previous observations; for example, we show that ionospheric contribution to O(+3)) is negligible. Through comparison with model ion trajectories, we interpret the lack of pronounced secondary ion density peaks colocated with the primary density peaks to indicate that: (1) negligible charge exchange occurs at L greater than 7, that is, solar wind secondaries are produced at L less than 7, and (2) solar wind secondaries do not form a significant portion of the plasma sheet population injected into the QTR. We conclude that little of the energetic solar wind secondary ion population is recirculated through the magnetosphere.

Christon, S. P.↗

Analysis of the heliospheric current sheet at Earth's orbit and model comparisons

IMP 8 magnetic field data for the first half of the year 1994, i.e., for about 6 solar rotations, are analyzed around regions of sector boundary crossings with the purpose of obtaining both gross- and fine-scale characteristics of the related heliospheric current sheets separating the observed sectors. For purposes of estimating the attitudes of the normals to the sector boundaries. analysis intervals (sometimes 30 min or more in length) allowing the field to fully complete an excursion of about 180 deg were used in the study, which consisted of variance analyses of the field within those intervals. The resulting boundary normals were analyzed and compared to known (generic) models of projected heliospheric current sheets and to a coronal field model for the same time period. One of the most outstanding features of the resulting ensemble of estimated boundary normals for this period is that they strongly prefer low inclinations, indicating that the observations do not support a 1 AU model that predicts a current sheet whose surface is approximately parallel with the sun's equator, such as the 'sombrero' model. They instead support a model that predicts a relatively high inclination current sheet at 1 AU. Also the normals assume a surprisingly large range of longitudes, somewhat favoring those consistent with a Parker model (45 deg and 225 deg) and/or radial alignment (0 deg and 180 deg). These boundary structures, as defined, are shown typically to be as broad as several hundred proton gyroradii, but having embedded within them very thin structures associated with stronger currents. Such thin structures have normals usually differing markedly from the gross boundary. For some crossings there are indications of a wave-like structure in the current sheet as it passed the spacecraft.

Lepping, R. P.↗

The effect of exercise and rest duration on the generation of venous gas bubbles at altitude

BACKGROUND: Decompression, as occurs with aviators and astronauts undergoing high altitude operations or with deep-sea divers returning to surface, can cause gas bubbles to form within the organism. Pressure changes to evoke bubble formation in vivo during depressurization are several orders of magnitude less than those required for gas phase formation in vitro in quiescent liquids. Preformed micronuclei acting as "seeds" have been proposed, dating back to the 1940's. These tissue gas micronuclei have been attributed to a minute gas phase located in hydrophobic cavities, surfactant-stabilized microbubbles, or arising from musculoskeletal activity. The lifetimes of these micronuclei have been presumed to be from a few minutes to several weeks. HYPOTHESIS: The greatest incidence of venous gas emboli (VGE) will be detected by precordial Doppler ultrasound with depressurization immediately following lower extremity exercise, with progressively reduced levels of VGE observed as the interval from exercise to depressurization lengthens. METHODS: In a blinded cross-over design, 20 individuals (15 men, 5 women) at sea level exercised by performing knee-bend squats (150 knee flexes over 10 min, 235-kcal x h(-1)) either at the beginning, middle, or end of a 2-h chair-rest period without an oxygen prebreathe. Seated subjects were then depressurized to 6.2 psia (6,706 m or 22,000 ft altitude equivalent) for 120 min with no exercise performed at altitude. RESULTS: Of the 20 subjects with VGE in the pulmonary artery, 10 demonstrated a greater incidence of bubbles with exercise performed just prior to depressurization, compared with decreasing bubble grades and incidence as the interval of rest increased prior to depressurization. No decompression illness was reported. CONCLUSIONS: There is a significant increase in decompression-induced bubble formation at 6.2 psia when lower extremity exercise is performed just prior to depressurization as compared with longer rest intervals. Analysis indicated that micronuclei half-life is on the order of an hour under these hypobaric conditions.

Controlled Clinical Trial↗

TOPSIS method based on the connection number of set pair analysis under interval-valued intuitionistic fuzzy set environment

The objective of this paper is to focus on multi-attribute decision-making for interval-valued intuitionistic fuzzy set environment based on set pair analysis (SPA). For it, the major component of the SPA known as connection number has been constructed based on the set pairs between two preference values consists of every attribute and ideal pairs of it. Based on these connection numbers, an extension of technique for order of preference by similarity to ideal solution method is developed by combining the proposed connection number for IVIFSs and hence finding the best alternative(s) using relative degree of closeness coefficient. An illustrative example has been given for demonstrating the approach and compares their performance with some existing measures.

97 MATHEMATICS AND COMPUTING↗